Skip to content

L
linux
Switch branch/tag
  1. 10 Dec, 2013 3 commits
    • Mike Snitzer's avatar
      dm space map metadata: return on failure in sm_metadata_new_block · f62b6b8f
      Mike Snitzer authored 
      Commit 2fc48021 ("dm persistent
metadata: add space map threshold callback") introduced a regression
to the metadata block allocation path that resulted in errors being
ignored.  This regression was uncovered by running the following
device-mapper-test-suite test:
dmtest run --suite thin-provisioning -n /exhausting_metadata_space_causes_fail_mode/

The ignored error codes in sm_metadata_new_block() could crash the
kernel through use of either the dm-thin or dm-cache targets, e.g.:

device-mapper: thin: 253:4: reached low water mark for metadata device: sending event.
device-mapper: space map metadata: unable to allocate new metadata block
general protection fault: 0000 [#1] SMP
...
Workqueue: dm-thin do_worker [dm_thin_pool]
task: ffff880035ce2ab0 ti: ffff88021a054000 task.ti: ffff88021a054000
RIP: 0010:[<ffffffffa0331385>]  [<ffffffffa0331385>] metadata_ll_load_ie+0x15/0x30 [dm_persistent_data]
RSP: 0018:ffff88021a055a68  EFLAGS: 00010202
RAX: 003fc8243d212ba0 RBX: ffff88021a780070 RCX: ffff88021a055a78
RDX: ffff88021a055a78 RSI: 0040402222a92a80 RDI: ffff88021a780070
RBP: ffff88021a055a68 R08: ffff88021a055ba4 R09: 0000000000000010
R10: 0000000000000000 R11: 00000002a02e1000 R12: ffff88021a055ad4
R13: 0000000000000598 R14: ffffffffa0338470 R15: ffff88021a055ba4
FS:  0000000000000000(0000) GS:ffff88033fca0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007f467c0291b8 CR3: 0000000001a0b000 CR4: 00000000000007e0
Stack:
 ffff88021a055ab8 ffffffffa0332020 ffff88021a055b30 0000000000000001
 ffff88021a055b30 0000000000000000 ffff88021a055b18 0000000000000000
 ffff88021a055ba4 ffff88021a055b98 ffff88021a055ae8 ffffffffa033304c
Call Trace:
 [<ffffffffa0332020>] sm_ll_lookup_bitmap+0x40/0xa0 [dm_persistent_data]
 [<ffffffffa033304c>] sm_metadata_count_is_more_than_one+0x8c/0xc0 [dm_persistent_data]
 [<ffffffffa0333825>] dm_tm_shadow_block+0x65/0x110 [dm_persistent_data]
 [<ffffffffa0331b00>] sm_ll_mutate+0x80/0x300 [dm_persistent_data]
 [<ffffffffa0330e60>] ? set_ref_count+0x10/0x10 [dm_persistent_data]
 [<ffffffffa0331dba>] sm_ll_inc+0x1a/0x20 [dm_persistent_data]
 [<ffffffffa0332270>] sm_disk_new_block+0x60/0x80 [dm_persistent_data]
 [<ffffffff81520036>] ? down_write+0x16/0x40
 [<ffffffffa001e5c4>] dm_pool_alloc_data_block+0x54/0x80 [dm_thin_pool]
 [<ffffffffa001b23c>] alloc_data_block+0x9c/0x130 [dm_thin_pool]
 [<ffffffffa001c27e>] provision_block+0x4e/0x180 [dm_thin_pool]
 [<ffffffffa001fe9a>] ? dm_thin_find_block+0x6a/0x110 [dm_thin_pool]
 [<ffffffffa001c57a>] process_bio+0x1ca/0x1f0 [dm_thin_pool]
 [<ffffffff8111e2ed>] ? mempool_free+0x8d/0xa0
 [<ffffffffa001d755>] process_deferred_bios+0xc5/0x230 [dm_thin_pool]
 [<ffffffffa001d911>] do_worker+0x51/0x60 [dm_thin_pool]
 [<ffffffff81067872>] process_one_work+0x182/0x3b0
 [<ffffffff81068c90>] worker_thread+0x120/0x3a0
 [<ffffffff81068b70>] ? manage_workers+0x160/0x160
 [<ffffffff8106eb2e>] kthread+0xce/0xe0
 [<ffffffff8106ea60>] ? kthread_freezable_should_stop+0x70/0x70
 [<ffffffff8152af6c>] ret_from_fork+0x7c/0xb0
 [<ffffffff8106ea60>] ? kthread_freezable_should_stop+0x70/0x70
 [<ffffffff8152af6c>] ret_from_fork+0x7c/0xb0
 [<ffffffff8106ea60>] ? kthread_freezable_should_stop+0x70/0x70
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
Acked-by: default avatarJoe Thornber <ejt@redhat.com>
Cc: stable@vger.kernel.org # v3.10+
      f62b6b8f
    • Mikulas Patocka's avatar
      dm table: fail dm_table_create on dm_round_up overflow · 5b2d0657
      Mikulas Patocka authored 
      The dm_round_up function may overflow to zero.  In this case,
dm_table_create() must fail rather than go on to allocate an empty array
with alloc_targets().

This fixes a possible memory corruption that could be caused by passing
too large a number in "param->target_count".
Signed-off-by: default avatarMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
      5b2d0657
    • Mikulas Patocka's avatar
      dm snapshot: avoid snapshot space leak on crash · 230c83af
      Mikulas Patocka authored 
      There is a possible leak of snapshot space in case of crash.

The reason for space leaking is that chunks in the snapshot device are
allocated sequentially, but they are finished (and stored in the metadata)
out of order, depending on the order in which copying finished.

For example, supposed that the metadata contains the following records
SUPERBLOCK
METADATA (blocks 0 ... 250)
DATA 0
DATA 1
DATA 2
...
DATA 250

Now suppose that you allocate 10 new data blocks 251-260. Suppose that
copying of these blocks finish out of order (block 260 finished first
and the block 251 finished last). Now, the snapshot device looks like
this:
SUPERBLOCK
METADATA (blocks 0 ... 250, 260, 259, 258, 257, 256)
DATA 0
DATA 1
DATA 2
...
DATA 250
DATA 251
DATA 252
DATA 253
DATA 254
DATA 255
METADATA (blocks 255, 254, 253, 252, 251)
DATA 256
DATA 257
DATA 258
DATA 259
DATA 260

Now, if the machine crashes after writing the first metadata block but
before writing the second metadata block, the space for areas DATA 250-255
is leaked, it contains no valid data and it will never be used in the
future.

This patch makes dm-snapshot complete exceptions in the same order they
were allocated, thus fixing this bug.

Note: when backporting this patch to the stable kernel, change the version
field in the following way:
* if version in the stable kernel is {1, 11, 1}, change it to {1, 12, 0}
* if version in the stable kernel is {1, 10, 0} or {1, 10, 1}, change it
  to {1, 10, 2}
Userspace reads the version to determine if the bug was fixed, so the
version change is needed.
Signed-off-by: default avatarMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
      230c83af
  3. 18 Nov, 2013 1 commit
  5. 12 Nov, 2013 1 commit
  7. 11 Nov, 2013 6 commits
  9. 09 Nov, 2013 21 commits
  11. 05 Nov, 2013 2 commits
    • Joe Thornber's avatar
      dm array: fix bug in growing array · 9c1d4de5
      Joe Thornber authored 
      Entries would be lost if the old tail block was partially filled.
Signed-off-by: default avatarJoe Thornber <ejt@redhat.com>
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.9+
      9c1d4de5
    • Hannes Reinecke's avatar
      dm mpath: requeue I/O during pg_init · b63349a7
      Hannes Reinecke authored 
      When pg_init is running no I/O can be submitted to the underlying
devices, as the path priority etc might change.  When using queue_io for
this, requests will be piling up within multipath as the block I/O
scheduler just sees a _very fast_ device.  All of this queued I/O has to
be resubmitted from within multipathing once pg_init is done.

This approach has the problem that it's virtually impossible to
abort I/O when pg_init is running, and we're adding heavy load
to the devices after pg_init since all of the queued I/O needs to be
resubmitted _before_ any requests can be pulled off of the request queue
and normal operation continues.

This patch will requeue the I/O that triggers the pg_init call, and
return 'busy' when pg_init is in progress.  With these changes the block
I/O scheduler will stop submitting I/O during pg_init, resulting in a
quicker path switch and less I/O pressure (and memory consumption) after
pg_init.
Signed-off-by: default avatarHannes Reinecke <hare@suse.de>
[patch header edited for clarity and typos by Mike Snitzer]
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      b63349a7
  13. 01 Nov, 2013 1 commit
    • Shiva Krishna Merla's avatar
      dm mpath: fix race condition between multipath_dtr and pg_init_done · 954a73d5
      Shiva Krishna Merla authored 
      Whenever multipath_dtr() is happening we must prevent queueing any
further path activation work.  Implement this by adding a new
'pg_init_disabled' flag to the multipath structure that denotes future
path activation work should be skipped if it is set.  By disabling
pg_init and then re-enabling in flush_multipath_work() we also avoid the
potential for pg_init to be initiated while suspending an mpath device.

Without this patch a race condition exists that may result in a kernel
panic:

1) If after pg_init_done() decrements pg_init_in_progress to 0, a call
   to wait_for_pg_init_completion() assumes there are no more pending path
   management commands.
2) If pg_init_required is set by pg_init_done(), due to retryable
   mode_select errors, then process_queued_ios() will again queue the
   path activation work.
3) If free_multipath() completes before activate_path() work is called a
   NULL pointer dereference like the following can be seen when
   accessing members of the recently destructed multipath:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000090
RIP: 0010:[<ffffffffa003db1b>]  [<ffffffffa003db1b>] activate_path+0x1b/0x30 [dm_multipath]
[<ffffffff81090ac0>] worker_thread+0x170/0x2a0
[<ffffffff81096c80>] ? autoremove_wake_function+0x0/0x40

[switch to disabling pg_init in flush_multipath_work & header edits by Mike Snitzer]
Signed-off-by: default avatarShiva Krishna Merla <shivakrishna.merla@netapp.com>
Reviewed-by: default avatarKrishnasamy Somasundaram <somasundaram.krishnasamy@netapp.com>
Tested-by: default avatarSpeagle Andy <Andy.Speagle@netapp.com>
Acked-by: default avatarJunichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
      954a73d5
  15. 31 Oct, 2013 1 commit
  17. 13 Oct, 2013 4 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7