- 05 Apr, 2017 5 commits
-
-
Christoph Hellwig authored
Don't pass the status explicitly but derive it from the requeust, and unwind the complex condition to be more readable. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Christoph Hellwig authored
->retries is counting the number of times a command is resubmitted, and be cleared on the first time we see the command. We currently don't do that for non-PCIe command, which is easily fixed by moving the setup to common code. Signed-off-by:
-
Christoph Hellwig authored
This driver is for pre-IDE hardisk that are only found in PC from the stoneage of personal computing, and which we don't support elsewhere in the kernel these days. It's also been marked broken forever. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Bart Van Assche authored
The block layer core sets blk_mq_queue_data.list but no block drivers read that member. Hence remove it and also the code that is used to set this member. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
-
Jan Kara authored
Writeback throttling does not play well with CFQ since that also tries to throttle async writes. As a result async writeback can get starved in presence of readers. As an example take a benchmark simulating postgreSQL database running over a standard rotating SATA drive. There are 16 processes doing random reads from a huge file (2*machine memory), 1 process doing random writes to the huge file and calling fsync once per 50000 writes and 1 process doing sequential 8k writes to a relatively small file wrapping around at the end of the file and calling fsync every 5 writes. Under this load read latency easily exceeds the target latency of 75 ms (just because there are so many reads happening against a relatively slow disk) and thus writeback is throttled to a point where only 1 write request is allowed at a time. Blktrace data then looks like: 8,0 1 0 8.347751764 0 m N cfq workload slice:40000000 8,0 1 0 8.347755256 0 m N cfq293A / set_active wl_class: 0 wl_type:0 8,0 1 0 8.347784100 0 m N cfq293A / Not idling. st->count:1 8,0 1 3814 8.347763916 5839 UT N [kworker/u9:2] 1 8,0 0 0 8.347777605 0 m N cfq293A / Not idling. st->count:1 8,0 1 0 8.347784100 0 m N cfq293A / Not idling. st->count:1 8,0 3 1596 8.354364057 0 C R 156109528 + 8 (6906954) [0] 8,0 3 0 8.354383193 0 m N cfq6196SN / complete rqnoidle 0 8,0 3 0 8.354386476 0 m N cfq schedule dispatch 8,0 3 0 8.354399397 0 m N cfq293A / Not idling. st->count:1 8,0 3 0 8.354404705 0 m N cfq293A / dispatch_insert 8,0 3 0 8.354409454 0 m N cfq293A / dispatched a request 8,0 3 0 8.354412527 0 m N cfq293A / activate rq, drv=1 8,0 3 1597 8.354414692 0 D W 145961400 + 24 (6718452) [swapper/0] 8,0 3 0 8.354484184 0 m N cfq293A / Not idling. st->count:1 8,0 3 0 8.354487536 0 m N cfq293A / slice expired t=0 8,0 3 0 8.354498013 0 m N / served: vt=5888102466265088 min_vt=5888074869387264 8,0 3 0 8.354502692 0 m N cfq293A / sl_used=6737519 disp=1 charge=6737519 iops=0 sect=24 8,0 3 0 8.354505695 0 m N cfq293A / del_from_rr ... 8,0 0 1810 8.354728768 0 C W 145961400 + 24 (314076) [0] 8,0 0 0 8.354746927 0 m N cfq293A / complete rqnoidle 0 ... 8,0 1 3829 8.389886102 5839 G W 145962968 + 24 [kworker/u9:2] 8,0 1 3830 8.389888127 5839 P N [kworker/u9:2] 8,0 1 3831 8.389908102 5839 A W 145978336 + 24 <- (8,4) 44000 8,0 1 3832 8.389910477 5839 Q W 145978336 + 24 [kworker/u9:2] 8,0 1 3833 8.389914248 5839 I W 145962968 + 24 (28146) [kworker/u9:2] 8,0 1 0 8.389919137 0 m N cfq293A / insert_request 8,0 1 0 8.389924305 0 m N cfq293A / add_to_rr 8,0 1 3834 8.389933175 5839 UT N [kworker/u9:2] 1 ... 8,0 0 0 9.455290997 0 m N cfq workload slice:40000000 8,0 0 0 9.455294769 0 m N cfq293A / set_active wl_class:0 wl_type:0 8,0 0 0 9.455303499 0 m N cfq293A / fifo=ffff880003166090 8,0 0 0 9.455306851 0 m N cfq293A / dispatch_insert 8,0 0 0 9.455311251 0 m N cfq293A / dispatched a request 8,0 0 0 9.455314324 0 m N cfq293A / activate rq, drv=1 8,0 0 2043 9.455316210 6204 D W 145962968 + 24 (1065401962) [pgioperf] 8,0 0 0 9.455392407 0 m N cfq293A / Not idling. st->count:1 8,0 0 0 9.455395969 0 m N cfq293A / slice expired t=0 8,0 0 0 9.455404210 0 m N / served: vt=5888958194597888 min_vt=5888941810597888 8,0 0 0 9.455410077 0 m N cfq293A / sl_used=4000000 disp=1 charge=4000000 iops=0 sect=24 8,0 0 0 9.455416851 0 m N cfq293A / del_from_rr ... 8,0 0 2045 9.455648515 0 C W 145962968 + 24 (332305) [0] 8,0 0 0 9.455668350 0 m N cfq293A / complete rqnoidle 0 ... 8,0 1 4371 9.455710115 5839 G W 145978336 + 24 [kworker/u9:2] 8,0 1 4372 9.455712350 5839 P N [kworker/u9:2] 8,0 1 4373 9.455730159 5839 A W 145986616 + 24 <- (8,4) 52280 8,0 1 4374 9.455732674 5839 Q W 145986616 + 24 [kworker/u9:2] 8,0 1 4375 9.455737563 5839 I W 145978336 + 24 (27448) [kworker/u9:2] 8,0 1 0 9.455742871 0 m N cfq293A / insert_request 8,0 1 0 9.455747550 0 m N cfq293A / add_to_rr 8,0 1 4376 9.455756629 5839 UT N [kworker/u9:2] 1 So we can see a Q event for a write request, then IO is blocked by writeback throttling and G and I events for the request happen only once other writeback IO is completed. Thus CFQ always sees only one write request. When it sees it, it queues the async queue behind all the read queues and the async queue gets scheduled after about one second. When it is scheduled, that one request gets dispatched and async queue is expired as it has no more requests to submit. Overall we submit about one write request per second. Although this scheduling is beneficial for read latency, writes are heavily starved and this causes large delays all over the system (due to processes blocking on page lock, transaction starts, etc.). When writeback throttling is disabled, write throughput is about one fifth of a read throughput which roughly matches readers/writers ratio and overall the system stalls are much shorter. Mixing writeback throttling logic with CFQ throttling logic is always a recipe for surprises as CFQ assumes it sees the big part of the picture which is not necessarily true when writeback throttling is blocking requests. So disable writeback throttling logic by default when CFQ is used as an IO scheduler. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
- 04 Apr, 2017 35 commits
-
-
Adam Manzanares authored
In 4.10 I introduced a patch that associates the ioc priority with each request in the block layer. This work was done in the single queue block layer code. This patch unifies ioc priority to request mapping across the single/multi queue block layers. I have tested this patch with the null block device driver with the following parameters. null_blk queue_mode=2 irqmode=0 use_per_node_hctx=1 nr_devices=1 I have not seen a performance regression with this patch and I would appreciate any feedback or additional testing. I have also verified that io priorities are passed to the device when using the SQ and MQ path to a SATA HDD that supports io priorities. Reviewed-by:
Adam Manzanares <adam.manzanares@wdc.com> Reviewed-by:
-
Christoph Hellwig authored
This avoids duplicating the logic four times, and it also allows to keep some helpers static in core.c or just opencode them. Note that this loses printing the aborted status on completions in the PCI driver as that uses a data structure not available any more. Signed-off-by:
-
Christoph Hellwig authored
A requeue means we go through nvme_fc_start_fcp_op again and get another controller reference. To make sure the refcount doesn't leak we also need to drop it for every completion that came from the LLDD. Signed-off-by:
-
Sagi Grimberg authored
This way our max retry limit holds as well. Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
-
Sagi Grimberg authored
This way our max retry limit holds as well. Signed-off-by:
-
Sagi Grimberg authored
This way our max retry limit holds as well. Signed-off-by:
-
James Smart authored
As Dan Carpenter pointed out: mixing 16-bit nvme status with 32-bit error status from driver. Corrected comment on fcp request struct status field, and converted done routine to explicitly set nvme status codes for nvme status. Signed-off-by:
James Smart <james.smart@broadcom.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
James Smart authored
Clear SG list to avoid double frees of payload page list Signed-off-by:
-
James Smart authored
LS validations shouldn't have been independent checks. Signed-off-by:
-
James Smart authored
nvmet_fc: Sync NVME LS reject reasons with spec Signed-off-by:
-
James Smart authored
Add check of status_code in ERSP_IU Signed-off-by:
-
James Smart authored
Update FC-NVME definitions to match FC-NVME r1.14 (16-020vB) plus change voted in by 2/22 FC-NVME Adhoc (see HOSTID below). Includes the following: - Addition of "status_code" field to ERSP IU - Addition of FC-NVME LS RJT reason_codes and reason_explanations - CreateAssociation payload, HostID field shortened to 16 bytes Signed-off-by:
-
Sagi Grimberg authored
Before scheduling a reconnect attempt, check nr_reconnects against max_reconnects, if not exhausted (or max_reconnects is not -1), schedule a reconnect attempts, otherwise schedule ctrl removal. Reviewed-by:
-
Sagi Grimberg authored
When a host sense that its controller session is damaged, it tries to re-establish it periodically (reconnect every reconnect_delay). It may very well be that the controller is gone and never coming back, in this case the host will try to reconnect forever. Add a ctrl_loss_tmo to bound the number of reconnect attempts to a specific controller (default to a reasonable 10 minutes). The timeout configuration is actually translated into number of reconnect attempts and not a schedule on its own but rather divided with reconnect_delay. This is useful to prevent racing flows of remove and reconnect, and it doesn't really matter if we remove slightly sooner than what the user requested. Reviewed-by:
-
Sagi Grimberg authored
we already have it in opts. Reviewed-by:
-
Sagi Grimberg authored
useful to validate that the we didn't mess up the command_id. Signed-off-by:
-
Sagi Grimberg authored
Reviewed-by:
-
Sagi Grimberg authored
If nvmf_register_transport happened to fail (it can't, but theoretically) we leak memory. Signed-off-by:
-
Sagi Grimberg authored
if nvmf_register_transport happend to fail, we need to nvmet_unregister_transport as well. Signed-off-by:
-
Sagi Grimberg authored
If nvmf_register_transport happened to fail (it can't, but theoretically) we leak memory. Signed-off-by:
-
Max Gurtovoy authored
Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
-
Parav Pandit authored
This patch introduces helper function for checking controller status during admin and io command processing which returns u16 status. As to bring consistency on returning status, other friend functions also now return u16 status instead of int to match the spec. As part of the theseerror log prints in also prints qid on which command error occured. Signed-off-by:
-
Parav Pandit authored
This patch avoids printing "nvmet:" twice in error logs as its already coming through pr_fmt macro. Reviewed-by:
-
Sagi Grimberg authored
Instead of parsing address strings, use a generic helper. Acked-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Sagi Grimberg authored
Both the destination and the host addresses are now parsed using inet_pton_with_scope helper. We also get ipv6 (with address scopes support). Reviewed-by:
-
Sagi Grimberg authored
Instead of parsing address strings, use a generic helper. This also adds ipv6 (with address scopes) support. Reviewed-by:
-
Sagi Grimberg authored
Several locations in the stack need to handle ipv4/ipv6 (with scope) and port strings conversion to sockaddr. Add a helper that takes either AF_INET, AF_INET6 or AF_UNSPEC (for wildcard) to centralize this handling. Suggested-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sagi Grimberg authored
Signed-off-by:
-
Sagi Grimberg authored
The target might be occupied with multiple hosts so lets give it some more grace before failing the connection establishment. Signed-off-by:
-
Sagi Grimberg authored
If we are attacked with establishments/teradowns we need to make sure we do not consume too much system memory. Thus let ongoing controller teardowns complete before accepting new controller establishments. Signed-off-by:
-
Sagi Grimberg authored
If a cpu unplug event has occured, we need to take the minimum of the provided nr_io_queues and the number of online cpus, otherwise we won't be able to connect them as blk-mq mapping won't dispatch to those queues. Reviewed-by:
-
Sagi Grimberg authored
When handling a new recv command, we grab a new rsp resource and check for the queue state being live. In case the queue is not in live state, we simply restore the rsp back to the free list. However in this flow we didn't set rsp->queue yet, so we cannot dereference it. Instead, make sure to initialize rsp->queue (and other rsp members) as soon as possible so we won't reference uninitialized variables. Reported-by:
Yi Zhang <yizhan@redhat.com> Reported-by:
Raju Rangoju <rajur@chelsio.com> Reviewed-by:
-
Sagi Grimberg authored
percpu_ref_kill is not enough to prevent subsequent percpu_ref_tryget_live from failing. Hence call perfcpu_ref_kill_confirm to make it safe. Reviewed-by:
-
Sagi Grimberg authored
If a cpu unplug event has occured, we need to take the minimum of the provided nr_io_queues and the number of online cpus, otherwise we won't be able to connect them as blk-mq mapping won't dispatch to those queues. Reviewed-by:
-
Sagi Grimberg authored
we need to destroy the nvmet sq and let it finish gracefully before continue to cleanup the queue. Reviewed-by:
-
