- 19 Sep, 2017 40 commits
-
-
Florian Westphal authored
pass the entries to test as an argument instead. Followup patch will add an rhlist test case; rhlist delete opererations are slow so we need to use a smaller number to test it. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: dsa: b53/bcm_sf2 cleanups This patch series is a first pass set of clean-ups to reduce the number of LOCs between b53 and bcm_sf2 and sharing as many functions as possible. There is a number of additional cleanups queued up locally that require more thorough testing. Changes in v3: - remove one extra argument for the b53_build_io_op macro (David Laight) - added additional Reviewed-by tags from Vivien Changes in v2: - added Reviewed-by tags from Vivien - added a missing EXPORT_SYMBOL() in patch 8 - fixed a typo in patch 5 ==================== Signed-off-by: -
Florian Fainelli authored
Export b53_{enable,disable}_port and use these two functions in bcm_sf2_port_setup and bcm_sf2_port_disable. The generic functions cannot be used without wrapping because we need to manage additional switch integration details (PHY, Broadcom tag etc.). Reviewed-by:Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
The magic number 8 in 3 locations in bcm_sf2_cfp.c actually designates the number of switch port egress queues, so use that define instead of open-coding it. Reviewed-by:
-
Florian Fainelli authored
bcm_sf2 and b53 do exactly the same thing, so share that piece. Reviewed-by:
-
Florian Fainelli authored
Add support for enabling and disabling EEE, as well as re-negotiating it in .adjust_link() and in .port_enable(). Reviewed-by:
-
Florian Fainelli authored
Move the bcm_sf2 EEE-related functions to the b53 driver because this is shared code amongst Gigabit capable switch, only 5325 and 5365 are too old to support that. Reviewed-by:
-
Florian Fainelli authored
In preparation for migrating the EEE code from bcm_sf2 to b53, define the full EEE register page and offsets within that page. Reviewed-by:
-
Florian Fainelli authored
The code to enable Broadcom tags/headers is largely switch independent, and in preparation for enabling it for multiple devices with b53, move the code we have in bcm_sf2.c to b53_common.c Reviewed-by:
-
Florian Fainelli authored
Instead of repeating the same pattern: acquire mutex, read/write, release mutex, define a macro: b53_build_op() which takes the type (read|write), I/O size, and value (scalar or pointer). This helps with fixing bugs that could exist (e.g: missing barrier, lock etc.). Reviewed-by:
-
Florian Fainelli authored
There is no need to configure the enabled ports once in bcm_sf2_sw_setup() and then a second time around when dsa_switch_ops::port_enable is called, just do it when port_enable is called which is better in terms of power consumption and correctness. Reviewed-by:
-
Florian Fainelli authored
There is no need to configure the enabled ports once in b53_setup() and then a second time around when dsa_switch_ops::port_enable is called, just do it when port_enable is called which is better in terms of power consumption and correctness. Reviewed-by:
-
Florian Fainelli authored
In preparation for future changes allowing the configuring of multiple CPU ports, make b53_enable_cpu_port() take a port argument. Reviewed-by:
-
Florian Fainelli authored
This is not used anywhere, so remove it. Reviewed-by:
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: move master ethtool code The DSA core overrides the master device's ethtool_ops structure so that it can inject statistics and such of its dedicated switch CPU port. This ethtool code is currently called on unnecessary conditions or before the master interface and its switch CPU port get wired up. This patchset fixes this. Similarly to slave.c where the DSA slave net_device is the entry point of the dsa_slave_* functions, this patchset also isolates the master's ethtool code in a new master.c file, where the DSA master net_device is the entry point of the dsa_master_* functions. This is a first step towards better control of the master device and support for multiple CPU ports. ==================== Tested-by:
-
Vivien Didelot authored
DSA overrides the master device ethtool ops, so that it can inject stats from its dedicated switch CPU port as well. The related code is currently split in dsa.c and slave.c, but it only scopes the master net device. Move it to a new master.c DSA core file. This file will be later extented with master net device specific code. Signed-off-by:
-
Vivien Didelot authored
DSA overrides the master's ethtool ops so that we can inject its CPU port's statistics. Because of that, we need to setup the ethtool ops after the master's dsa_ptr pointer has been assigned, not before. This patch setups the ethtool ops after dsa_ptr is assigned, and restores them before it gets cleared. Signed-off-by:
-
Vivien Didelot authored
When a DSA switch tree is meant to be applied, it already has a CPU port. Thus remove the condition of dst->cpu_dp. Moreover, the next lines access dst->cpu_dp unconditionally. Signed-off-by:
-
Vivien Didelot authored
There is no need to store a copy of the master ethtool ops, storing the original pointer in DSA and the new one in the master netdev itself is enough. In the meantime, set orig_ethtool_ops to NULL when restoring the master ethtool ops and check the presence of the master original ethtool ops as well as its needed functions before calling them. Signed-off-by:
-
Florian Westphal authored
Signed-off-by:
-
Eric Dumazet authored
skb->rbnode shares space with skb->next, skb->prev and skb->tstamp Current uses (TCP receive ofo queue and netem) need to save/restore tstamp, while skb->dev is either NULL (TCP) or a constant for a given queue (netem). Since we plan using an RB tree for TCP retransmit queue to speedup SACK processing with large BDP, this patch exchanges skb->dev and skb->tstamp. This saves some overhead in both TCP and netem. v2: removes the swtstamp field from struct tcp_skb_cb Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Prepare for multicast router offload Yotam says: This patch-set makes various preparations needed for the multicast router offloading, which include: - Add the needed registers. - Add needed ACL actions. - Add new traps and trap groups. - Exporting needed private structs and enums. ==================== Signed-off-by: -
Yotam Gigi authored
Add three new traps needed for multicast routing: - PIM: Trap for PIM protocol control packets. - RPF: Trap for packets that fail the RPF check on a specific hardware route entry. - MULTICAST: Generic trap for multicast. It is used for routes that trap the packets to the CPU. The RPF and MULTICAST traps have rate limiters as these traps may have line-rate of packets trapped. The PIM trap has a rate limiter similarly to other L3 control protocols. The rate limiters are implemented by adding three new trap groups for the newly introduced traps. Signed-off-by:
Yotam Gigi <yotamg@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Yotam Gigi authored
The mlxsw_sp_rif struct, defined as private struct in spectrum_router.c will be used in the multicast router source file. Due to the fact that the dev field will be needed by the multicast router logic, add an access function to it. Signed-off-by:
-
Yotam Gigi authored
Turn on two bits on the Spectrum RIF configuration: - IPv4 multicast: when a multicast packet arrives on a RIF, send it to go through multicast routes lookup. - IPv4 multicast forwarding enable: when multicast packet arrives on a RIF, allow it to be forwarded by multicast routes. If this bit is not set, multicast packets will go through multicast routing lookup but will be dropped at the egress of the ports. Signed-off-by:
-
Yotam Gigi authored
The RRCR register is used for copying and moving TCAM multicast routes from different offsets. It will be used to allow routes relocation for parman ops as part of the multicast router offloading logic. Signed-off-by:
-
Yotam Gigi authored
The RMFT-V2 register is used to configure and query the multicast table and will be used by the multicast router offloading logic. Signed-off-by:
-
Yotam Gigi authored
The multicast ERIF list entries resource indicates the number of entries that can be put in one rigr2 register operation. While the register can hold up to MLXSW_REG_RIGR2_MAX_ERIFS ( = 32) ERIF entries, the actual number allowed by firmware is indicated with this resource. Signed-off-by:
-
Yotam Gigi authored
The RIGR-V2 register is used to add, remove and query egress interface list of a multicast forwarding entry and it will be used by the multicast router offloading logic. Signed-off-by:
-
Yotam Gigi authored
This register is used for allocation of regions in the TCAM table and it will be used by the multicast router offloading logic. Signed-off-by:
-
Yotam Gigi authored
The MLXSW_REG_PXXX_FLEX_ACTION_SET_LEN is relevant for the multicast router registers too, so rename it to have a general name which is not bound to a specific register. Signed-off-by:
-
Yotam Gigi authored
Allow the trap ACL action to be configured with different traps. This allows the multicast router offloading code to use that same ACL action with the multicast router traps. By using different traps, the multicast router can have different trap policies and can handle the packet differently. Signed-off-by:
-
Yotam Gigi authored
The Spectrum multicast forwarding is done using an ACL action. Add the mcrouter ACL action that will be used to offload the multicast router logic. Signed-off-by:
-
Yotam Gigi authored
A flexible action instance allows, given a set of ops, creating, committing and sharing a set of ACL action blocks. The flexible action instance in question is using the spectrum KVD linear space to store the flexible action sets. Move this flexible action instance to the common spectrum struct to allow other users (such as multicast router) to get that functionality. Signed-off-by:
-
Yotam Gigi authored
The multicast router offloading code is going to require the counter_pools initialization to occur before the router initialization, thus, change the spectrum initialization order to fix it. Signed-off-by:
-
David S. Miller authored
Craig Gallek says: ==================== Implement delete for BPF LPM trie This was previously left as a TODO. Add the implementation and extend the test to cover it. ==================== Signed-off-by: -
Craig Gallek authored
Extend the 'random' operation tests to include a delete operation (delete half of the nodes from both lpm implementions and ensure that lookups are still equivalent). Also, add a simple IPv4 test which verifies lookup behavior as nodes are deleted from the tree. Signed-off-by:
Craig Gallek <kraig@google.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Craig Gallek authored
The 'trivial' lpm implementation in this test allows equivalent nodes to be added (that is, nodes consisting of the same prefix and prefix length). For lookup operations, this is fine because insertion happens at the head of the (singly linked) list and the first, best match is returned. In order to support deletion, the tlpm data structue must first enforce uniqueness. This change modifies the insertion algorithm to search for equivalent nodes and remove them. Note: the BPF_MAP_TYPE_LPM_TRIE already has a uniqueness invariant that is implemented as node replacement. Signed-off-by:
-
Craig Gallek authored
This is a simple non-recursive delete operation. It prunes paths of empty nodes in the tree, but it does not try to further compress the tree as nodes are removed. Signed-off-by:
-
