For the explicit unplugging, we'd prefer to kick things off
immediately and not pay the penalty of the latency to switch
to kblockd. So let blk_finish_plug() do the run inline, while
the implicit-on-schedule-out unplug will punt to kblockd.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

It's a bit of a mess currently. task->plug is being cleared
and reset in __blk_finish_plug(), and blk_finish_plug() is
testing for a NULL plug which cannot happen even from schedule()
anymore since it uses blk_needs_flush_plug() to determine
whether to call into this function at all.

So get rid of some of the cruft.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

In the function blk_register_queue(), var _dev_ is already assigned by
disk_to_dev().So use it directly instead of calling disk_to_dev() again.
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>

Modified by me to delete an empty line in the same function while
in there anyway.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

There are worries that we are now consuming a lot more stack in
some cases, since we potentially call into IO dispatch from
schedule() or io_schedule(). We can reduce this problem by moving
the running of the queue to kblockd, like the old plugging scheme
did as well.

This may or may not be a good idea from a performance perspective,
depending on how many tasks have queue plugs running at the same
time. For even the slightly contended case, doing just a single
queue run from kblockd instead of multiple runs directly from the
unpluggers will be faster.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

The original use for this dates back to when we had to track write
requests for serializing around barriers. That's not needed anymore,
so kill it.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

This was removed with the queue plug state. But we can easily readd
by checking if this is the first request going to this queue. It's
good information to have when tracing to see how effective the
plugging is.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

MD would like to know when a queue is unplugged, so it can flush
it's bitmap writes. Add such a callback.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

It's done at the top to avoid doing it for every queue we unplug.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

It was removed with the on-stack plugging, readd it and track the
depth of requests added when flushing the plug.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

We no longer have an unplug timer running, so no point in keeping
the trace point.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

If the request_fn ends up blocking, we could be re-entering
the plug flush. Since the list is protected by explicitly
not allowing schedule events, this isn't a terribly good idea.

Additionally, it can cause us to recurse. As request_fn called by
__blk_run_queue is allowed to 'schedule()' (after dropping the queue
lock of course), it is possible to get a recursive call:

 schedule -> blk_flush_plug -> __blk_finish_plug -> flush_plug_list
      -> __blk_run_queue -> request_fn -> schedule

We must make sure that the second schedule does not call into
blk_flush_plug again.  So instead of leaving the list of requests on
blk_plug->list, move them to a separate list leaving blk_plug->list
empty.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Don't query connections for widgets have no connections
  ALSA: HDA: Fix single internal mic on ALC275 (Sony Vaio VPCSB1C5E)
  ALSA: hda - HDMI: Fix MCP7x audio infoframe checksums
  ALSA: usb-audio: define another USB ID for a buggy USB MIDI cable
  ALSA: HDA: Fix dock mic for Lenovo X220-tablet
  ASoC: format_register_str: Don't clip register values
  ASoC: PXA: Fix oops in __pxa2xx_pcm_prepare
  ASoC: zylonite: set .codec_dai_name in initializer

* git://git.infradead.org/mtd-2.6:
  mtd: atmel_nand: use CPU I/O when buffer is in vmalloc(ed) region
  mtd: atmel_nand: modify test case for using DMA operations
  mtd: atmel_nand: fix support for CPUs that do not support DMA access
  mtd: atmel_nand: trivial: change DMA usage information trace
  mtd: mtdswap: fix printk format warning

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: Change initial mount authflavor only when server returns NFS4ERR_WRONGSEC
  NFS: Fix a signed vs. unsigned secinfo bug
  Revert "net/sunrpc: Use static const char arrays"

Fix erroneous syscall kernel-doc comments in kernel/signal.c.
Reported-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] compile fix for latest binutils
  [S390] cio: prevent purging of CCW devices in the online state
  [S390] qdio: fix init sequence
  [S390] Fix parameter passing for smp_switch_to_cpu()
  [S390] oprofile s390: prevent stack corruption

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  quota: Don't write quota info in dquot_commit()
  ext3: Fix writepage credits computation for ordered mode

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: mpc8xxx_wdt: fix build

Since 1c48a5c9 (dt: Eliminate of_platform_{,un}register_driver)
mpc8xxx_wdt no longer builds as it tries to refer to a 'match' variable
rather than ofdev->dev.of_match that it checks just before.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

When attempting an initial mount, we should only attempt other
authflavors if AUTH_UNIX receives a NFS4ERR_WRONGSEC error.
This allows other errors to be passed back to userspace programs.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Merge branch 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6

* 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6:
  efifb: Add override for 11" Macbook Air 3,1
  efifb: Support overriding fields FW tells us with the DMI data.
  fb: Reduce priority of resource conflict message
  savagefb: Remove obsolete else clause in savage_setup_i2c_bus
  savagefb: Set up I2C based on chip family instead of card id
  savagefb: Replace magic register address with define
  drivers/video/bfin-lq035q1-fb.c: introduce missing kfree
  video: s3c-fb: fix checkpatch errors and warning
  efifb: support AMD Radeon HD 6490
  s3fb: fix Virge/GX2
  fbcon: Remove unused 'display *p' variable from fb_flashcursor()
  fbdev: sh_mobile_lcdcfb: fix module lock acquisition
  fbdev: sh_mobile_lcdcfb: add blanking support
  viafb: initialize margins correct
  viafb: refresh rate bug collection
  sh: mach-ap325rxa: move backlight control code
  sh: mach-ecovec24: support for main lcd backlight

Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  ARM: arch-shmobile: only run FSI init on respective boards
  ARM: arch-shmobile: only run HDMI init on respective boards
  ARM: mach-shmobile: Correctly check for CONFIG_MACH_MACKEREL

* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: select ARCH_NO_SYSDEV_OPS.
  sh: fix build error in board-sh7757lcr.c
  sh: landisk: Remove whitespace
  sh: landisk: Remove mv_nr_irqs
  sh: sh-sci: Fix double initialization by serial_console_setup
  serial: sh-sci: prevent setup of uninitialized serial console
  dma: shdma: add checking the DMAOR_AE in sh_dmae_err

Merge branches 'x86-fixes-for-linus', 'sched-fixes-for-linus', 'timers-fixes-for-linus', 'irq-fixes-for-linus' and 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-32, fpu: Fix FPU exception handling on non-SSE systems
  x86, hibernate: Initialize mmu_cr4_features during boot
  x86-32, NUMA: Fix ACPI NUMA init broken by recent x86-64 change
  x86: visws: Fixup irq overhaul fallout

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Clean up rebalance_domains() load-balance interval calculation

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/mrst/vrtc: Fix boot crash in mrst_rtc_init()
  rtc, x86/mrst/vrtc: Fix boot crash in rtc_read_alarm()

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Fix cpumask leak in __setup_irq()

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf probe: Fix listing incorrect line number with inline function
  perf probe: Fix to find recursively inlined function
  perf probe: Fix multiple --vars options behavior
  perf probe: Fix to remove redundant close
  perf probe: Fix to ensure function declared file

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (28 commits)
  staging: usbip: bugfix for isochronous packets and optimization
  staging: usbip: bugfix add number of packets for isochronous frames
  staging: usbip: bugfixes related to kthread conversion
  staging: usbip: fix shutdown problems.
  staging: hv: Fix GARP not sent after Quick Migration
  staging: IIO: IMU: ADIS16400: Avoid using printk facility directly
  staging: IIO: IMU: ADIS16400: Fix product ID check, skip embedded revision number
  staging: IIO: IMU: ADIS16400: Make sure only enabled scan_elements are pushed into the ring
  staging: IIO: IMU: ADIS16400: Fix addresses of GYRO and ACCEL calibration offset
  staging: IIO: IMU: ADIS16400: Add delay after self test
  staging: IIO: IMU: ADIS16400: Fix up SPI messages cs_change behavior
  staging/rtl81*: build as loadable modules only
  staging: brcm80211: removed 'is_amsdu causing toss' log spam
  staging: brcm80211: fix for 'Short CCK' log spam
  staging: brcm80211: fix for 'AC_BE txop..' logs spammed problem
  staging: memrar: remove driver from tree
  staging: sep: remove last memrar remnants
  staging: fix hv_mouse build, needs delay.h
  staging: fix olpc_dcon build errors
  staging: sm7xx: fixed defines
  ...

Fix up trivial conflict in drivers/staging/memrar/memrar_handler.c
(deleted vs trivial spelling fixes)

* 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: move and fix substitue search for missing CPUID entries
  KVM: fix XSAVE bit scanning
  KVM: Enable async page fault processing
  KVM: fix crash on irqfd deassign

* 'for-linus' of git://git.infradead.org/ubifs-2.6:
  UBI: do not select KALLSYMS_ALL
  UBI: do not compare array with NULL
  UBI: check if we are in RO mode in the erase routine
  UBIFS: fix debugging failure in dbg_check_space_info
  UBIFS: fix error path in dbg_debugfs_init_fs
  UBIFS: unify error path dbg_debugfs_init_fs
  UBIFS: do not select KALLSYMS_ALL
  UBIFS: fix assertion warnings
  UBIFS: fix oops on error path in read_pnode
  UBIFS: do not read flash unnecessarily

* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6:
  Fix common misspellings

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Add support for CH Pro Throttle
  HID: hid-magicmouse: Increase evdev buffer size
  HID: add FF support for Logitech G25/G27
  HID: roccat: Add support for wireless variant of Pyra
  HID: Fix typo Keyoutch -> Keytouch
  HID: add support for Skycable 0x3f07 wireless presenter

Fix build failure issue for hv_mouse
When build 2.6.39-rc1 kernel, it will be blocked at build hv_mouse.

  drivers/staging/hv/hv_mouse.c: In function ‘ReleaseInputDevice’:
  drivers/staging/hv/hv_mouse.c:293: error: implicit declaration of function ‘udelay’
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The normal mmap paths all avoid creating a mapping where the pgoff
inside the mapping could wrap around due to overflow.  However, an
expanding mremap() can take such a non-wrapping mapping and make it
bigger and cause a wrapping condition.

Noticed by Robert Swiecki when running a system call fuzzer, where it
caused a BUG_ON() due to terminally confusing the vma_prio_tree code.  A
vma dumping patch by Hugh then pinpointed the crazy wrapped case.
Reported-and-tested-by: Robert Swiecki <robert@swiecki.net>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixes the kernel warnings with IDT codecs like
    hda_codec: connection list not available for 0x1e
Signed-off-by: Takashi Iwai <tiwai@suse.de>

In cases where there is only one internal mic connected to ADC 0x11,
alc275_setup_dual_adc won't handle the case, so we need to add the
ADC node to the array of candidates.

Cc: stable@kernel.org
BugLink: http://bugs.launchpad.net/bugs/752792
Reported-by: Vincenzo Pii
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The MCP7x hardware computes the audio infoframe channel count
automatically, but requires the audio driver to set the audio
infoframe checksum manually via the Nv_VERB_SET_Info_Frame_Checksum
control verb.

When audio starts playing, nvhdmi_8ch_7x_pcm_prepare sets the checksum
to (0x71 - chan - chanmask).  For example, for 2ch audio, chan == 1
and chanmask == 0 so the checksum is set to 0x70.  When audio playback
finishes and the device is closed, nvhdmi_8ch_7x_pcm_close resets the
channel formats, causing the channel count to revert to 8ch.  Since
the checksum is not reset, the hardware starts generating audio
infoframes with invalid checksums.  This causes some displays to blank
the video.

Fix this by updating the checksum and channel mask when the device is
closed and also when it is first initialized.  In addition, make sure
that the channel mask is appropriate for an 8ch infoframe by setting
it to 0x13 (FL FR LFE FC RL RR RLC RRC).
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The sfi_mrtc_array[] only gets initialized when the sfi mrtc
table is parsed, so the vrtc_paddr should be initalized after it
too.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1302140389-27603-1-git-send-email-feng.tang@intel.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

Commit f44f7f96 ("RTC: Initialize kernel state from RTC") caused a
boot regression on the MRST platform.

The reason is that rtc_device_register() calls rtc_read_alarm() after
that change, which function does not have all driver data set up yet.

The rtc-mrst driver needs to call dev_set_drvdata() before rtc_device_register()
gets called.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1302140384-27571-1-git-send-email-feng.tang@intel.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

On 32bit systems without SSE (that is, they use FSAVE/FRSTOR for FPU
context switches), FPU exceptions in user mode cause Oopses, BUGs,
recursive faults and other nasty things:

fpu exception: 0000 [#1]
last sysfs file: /sys/power/state
Modules linked in: psmouse evdev pcspkr serio_raw [last unloaded: scsi_wait_scan]

Pid: 1638, comm: fxsave-32-excep Not tainted 2.6.35-07798-g58a992b9-dirty #633 VP3-596B-DD/VT82C597
EIP: 0060:[<c1003527>] EFLAGS: 00010202 CPU: 0
EIP is at math_error+0x1b4/0x1c8
EAX: 00000003 EBX: cf9be7e0 ECX: 00000000 EDX: cf9c5c00
ESI: cf9d9fb4 EDI: c1372db3 EBP: 00000010 ESP: cf9d9f1c
DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
Process fxsave-32-excep (pid: 1638, ti=cf9d8000 task=cf9be7e0 task.ti=cf9d8000)
Stack:
00000000 00000301 00000004 00000000 00000000 cf9d3000 cf9da8f0 00000001
<0> 00000004 cf9b6b60 c1019a6b c1019a79 00000020 00000242 000001b6 cf9c5380
<0> cf806b40 cf791880 00000000 00000282 00000282 c108a213 00000020 cf9c5380
Call Trace:
[<c1019a6b>] ? need_resched+0x11/0x1a
[<c1019a79>] ? should_resched+0x5/0x1f
[<c108a213>] ? do_sys_open+0xbd/0xc7
[<c108a213>] ? do_sys_open+0xbd/0xc7
[<c100353b>] ? do_coprocessor_error+0x0/0x11
[<c12d5965>] ? error_code+0x65/0x70
Code: a8 20 74 30 c7 44 24 0c 06 00 03 00 8d 54 24 04 89 d9 b8 08 00 00 00 e8 9b 6d 02 00 eb 16 8b 93 5c 02 00 00 eb 05 e9 04 ff ff ff <9b> dd 32 9b e9 16 ff ff ff 81 c4 84 00 00 00 5b 5e 5f 5d c3 c6
EIP: [<c1003527>] math_error+0x1b4/0x1c8 SS:ESP 0068:cf9d9f1c

This usually continues in slight variations until the system is reset.

This bug was introduced by commit 58a992b9:
	x86-32, fpu: Rewrite fpu_save_init()
Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
Link: http://lkml.kernel.org/r/1302106003-366952-1-git-send-email-hans.rosenfeld@amd.comSigned-off-by: H. Peter Anvin <hpa@zytor.com>

For isochronous packets the actual_length is the sum of the actual
length of each of the packets, however between the packets might be
padding, so it is not sufficient to just send the first actual_length
bytes of the buffer. To fix this and simultanesouly optimize the
bandwidth the content of the isochronous packets are send without the
padding, the padding is restored on the receiving end.
Signed-off-by: Arjan Mels <arjan.mels@gmx.net>
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Cc: Max Vozeler <max@vozeler.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>