Skip to content

L
linux
Switch branch/tag
  1. 03 May, 2023 13 commits
  3. 01 May, 2023 11 commits
    • David S. Miller's avatar
      Merge branch 'rxrpc-timeout-fixes' · fb7cba61
      David S. Miller authored 
      David Howells says:

====================
rxrpc: Timeout handling fixes

Here are three patches to fix timeouts handling in AF_RXRPC:

 (1) The hard call timeout should be interpreted in seconds, not
     milliseconds.

 (2) Allow a waiting call to be aborted (thereby cancelling the call) in
     the case a signal interrupts sendmsg() and leaves it hanging until it
     is granted a channel on a connection.

 (3) Kernel-generated calls get the timer started on them even if they're
     still waiting to be attached to a connection.  If the timer expires
     before the wait is complete and a conn is attached, an oops will
     occur.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fb7cba61
    • David Howells's avatar
      rxrpc: Fix timeout of a call that hasn't yet been granted a channel · db099c62
      David Howells authored 
      afs_make_call() calls rxrpc_kernel_begin_call() to begin a call (which may
get stalled in the background waiting for a connection to become
available); it then calls rxrpc_kernel_set_max_life() to set the timeouts -
but that starts the call timer so the call timer might then expire before
we get a connection assigned - leading to the following oops if the call
stalled:

	BUG: kernel NULL pointer dereference, address: 0000000000000000
	...
	CPU: 1 PID: 5111 Comm: krxrpcio/0 Not tainted 6.3.0-rc7-build3+ #701
	RIP: 0010:rxrpc_alloc_txbuf+0xc0/0x157
	...
	Call Trace:
	 <TASK>
	 rxrpc_send_ACK+0x50/0x13b
	 rxrpc_input_call_event+0x16a/0x67d
	 rxrpc_io_thread+0x1b6/0x45f
	 ? _raw_spin_unlock_irqrestore+0x1f/0x35
	 ? rxrpc_input_packet+0x519/0x519
	 kthread+0xe7/0xef
	 ? kthread_complete_and_exit+0x1b/0x1b
	 ret_from_fork+0x22/0x30

Fix this by noting the timeouts in struct rxrpc_call when the call is
created.  The timer will be started when the first packet is transmitted.

It shouldn't be possible to trigger this directly from userspace through
AF_RXRPC as sendmsg() will return EBUSY if the call is in the
waiting-for-conn state if it dropped out of the wait due to a signal.

Fixes: 9d35d880 ("rxrpc: Move client call connection to the I/O thread")
Reported-by: default avatarMarc Dionne <marc.dionne@auristor.com>
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
cc: linux-kernel@vger.kernel.org
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      db099c62
    • David Howells's avatar
      rxrpc: Make it so that a waiting process can be aborted · 0eb362d2
      David Howells authored 
      When sendmsg() creates an rxrpc call, it queues it to wait for a connection
and channel to be assigned and then waits before it can start shovelling
data as the encrypted DATA packet content includes a summary of the
connection parameters.

However, sendmsg() may get interrupted before a connection gets assigned
and further sendmsg() calls will fail with EBUSY until an assignment is
made.

Fix this so that the call can at least be aborted without failing on
EBUSY.  We have to be careful here as sendmsg() mustn't be allowed to start
the call timer if the call doesn't yet have a connection assigned as an
oops may follow shortly thereafter.

Fixes: 540b1c48 ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Reported-by: default avatarMarc Dionne <marc.dionne@auristor.com>
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
cc: linux-kernel@vger.kernel.org
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0eb362d2
    • David Howells's avatar
      rxrpc: Fix hard call timeout units · 0d098d83
      David Howells authored 
      The hard call timeout is specified in the RXRPC_SET_CALL_TIMEOUT cmsg in
seconds, so fix the point at which sendmsg() applies it to the call to
convert to jiffies from seconds, not milliseconds.

Fixes: a158bdd3 ("rxrpc: Fix timeout of a call that hasn't yet been granted a channel")
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
cc: linux-kernel@vger.kernel.org
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0d098d83
    • Tom Rix's avatar
      net: atlantic: Define aq_pm_ops conditionally on CONFIG_PM · 4f163bf8
      Tom Rix authored 
      For s390, gcc with W=1 reports
drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c:458:32: error:
  'aq_pm_ops' defined but not used [-Werror=unused-const-variable=]
  458 | static const struct dev_pm_ops aq_pm_ops = {
      |                                ^~~~~~~~~

The only use of aq_pm_ops is conditional on CONFIG_PM.
The definition of aq_pm_ops and its functions should also
be conditional on CONFIG_PM.
Signed-off-by: default avatarTom Rix <trix@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4f163bf8
    • Andy Moreton's avatar
      sfc: Fix module EEPROM reporting for QSFP modules · 281900a9
      Andy Moreton authored 
      The sfc driver does not report QSFP module EEPROM contents correctly
as only the first page is fetched from hardware.

Commit 0e1a2a3e ("ethtool: Add SFF-8436 and SFF-8636 max EEPROM
length definitions") added ETH_MODULE_SFF_8436_MAX_LEN for the overall
size of the EEPROM info, so use that to report the full EEPROM contents.

Fixes: 9b17010d ("sfc: Add ethtool -m support for QSFP modules")
Signed-off-by: default avatarAndy Moreton <andy.moreton@amd.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      281900a9
    • David S. Miller's avatar
      Merge branch 'r8152-fixes' · f858e2fd
      David S. Miller authored 
      Hayes Wang says:

====================
r8152: fix 2.5G devices

v3:
For patch #2, modify the comment.

v2:
For patch #1, Remove inline for fc_pause_on_auto() and fc_pause_off_auto(),
and update the commit message.

For patch #2, define the magic value for OCP register 0xa424.

v1:
These patches are used to fix some issues of RTL8156.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f858e2fd
    • Hayes Wang's avatar
      r8152: move setting r8153b_rx_agg_chg_indicate() · cce8334f
      Hayes Wang authored 
      Move setting r8153b_rx_agg_chg_indicate() for 2.5G devices. The
r8153b_rx_agg_chg_indicate() has to be called after enabling tx/rx.
Otherwise, the coalescing settings are useless.

Fixes: 195aae32 ("r8152: support new chips")
Signed-off-by: default avatarHayes Wang <hayeswang@realtek.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cce8334f
    • Hayes Wang's avatar
      r8152: fix the poor throughput for 2.5G devices · 61b0ad6f
      Hayes Wang authored 
      Fix the poor throughput for 2.5G devices, when changing the speed from
auto mode to force mode. This patch is used to notify the MAC when the
mode is changed.

Fixes: 195aae32 ("r8152: support new chips")
Signed-off-by: default avatarHayes Wang <hayeswang@realtek.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      61b0ad6f
    • Hayes Wang's avatar
      r8152: fix flow control issue of RTL8156A · 8ceda6d5
      Hayes Wang authored 
      The feature of flow control becomes abnormal, if the device sends a
pause frame and the tx/rx is disabled before sending a release frame. It
causes the lost of packets.

Set PLA_RX_FIFO_FULL and PLA_RX_FIFO_EMPTY to zeros before disabling the
tx/rx. And, toggle FC_PATCH_TASK before enabling tx/rx to reset the flow
control patch and timer. Then, the hardware could clear the state and
the flow control becomes normal after enabling tx/rx.

Besides, remove inline for fc_pause_on_auto() and fc_pause_off_auto().

Fixes: 195aae32 ("r8152: support new chips")
Signed-off-by: default avatarHayes Wang <hayeswang@realtek.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8ceda6d5
    • Victor Nogueira's avatar
      net/sched: act_mirred: Add carrier check · 526f28bd
      Victor Nogueira authored 
      There are cases where the device is adminstratively UP, but operationally
down. For example, we have a physical device (Nvidia ConnectX-6 Dx, 25Gbps)
who's cable was pulled out, here is its ip link output:

5: ens2f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
    link/ether b8:ce:f6:4b:68:35 brd ff:ff:ff:ff:ff:ff
    altname enp179s0f1np1

As you can see, it's administratively UP but operationally down.
In this case, sending a packet to this port caused a nasty kernel hang (so
nasty that we were unable to capture it). Aborting a transmit based on
operational status (in addition to administrative status) fixes the issue.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Acked-by: default avatarJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: default avatarVictor Nogueira <victor@mojatatu.com>
v1->v2: Add fixes tag
v2->v3: Remove blank line between tags + add change log, suggested by Leon
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      526f28bd
  5. 28 Apr, 2023 7 commits
    • Angelo Dureghello's avatar
      net: dsa: mv88e6xxx: add mv88e6321 rsvd2cpu · 66863178
      Angelo Dureghello authored 
      Add rsvd2cpu capability for mv88e6321 model, to allow proper bpdu
processing.
Signed-off-by: default avatarAngelo Dureghello <angelo.dureghello@timesys.com>
Fixes: 51c901a7 ("net: dsa: mv88e6xxx: distinguish Global 2 Rsvd2CPU")
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      66863178
    • Antoine Tenart's avatar
      net: ipv6: fix skb hash for some RST packets · dc6456e9
      Antoine Tenart authored 
      The skb hash comes from sk->sk_txhash when using TCP, except for some
IPv6 RST packets. This is because in tcp_v6_send_reset when not in
TIME_WAIT the hash is taken from sk->sk_hash, while it should come from
sk->sk_txhash as those two hashes are not computed the same way.

Packetdrill script to test the above,

   0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
  +0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
  +0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress)

  +0 > (flowlabel 0x1) S 0:0(0) <...>

  // Wrong ack seq, trigger a rst.
  +0 < S. 0:0(0) ack 0 win 4000

  // Check the flowlabel matches prior one from SYN.
  +0 > (flowlabel 0x1) R 0:0(0) <...>

Fixes: 9258b8b1 ("ipv6: tcp: send consistent autoflowlabel in RST packets")
Signed-off-by: default avatarAntoine Tenart <atenart@kernel.org>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dc6456e9
    • Andrea Mayer's avatar
      selftests: srv6: make srv6_end_dt46_l3vpn_test more robust · 46ef24c6
      Andrea Mayer authored 
      On some distributions, the rp_filter is automatically set (=1) by
default on a netdev basis (also on VRFs).
In an SRv6 End.DT46 behavior, decapsulated IPv4 packets are routed using
the table associated with the VRF bound to that tunnel. During lookup
operations, the rp_filter can lead to packet loss when activated on the
VRF.
Therefore, we chose to make this selftest more robust by explicitly
disabling the rp_filter during tests (as it is automatically set by some
Linux distributions).

Fixes: 03a0b567 ("selftests: seg6: add selftest for SRv6 End.DT46 Behavior")
Reported-by: default avatarHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: default avatarAndrea Mayer <andrea.mayer@uniroma2.it>
Tested-by: default avatarHangbin Liu <liuhangbin@gmail.com>
Reviewed-by: default avatarDavid Ahern <dsahern@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      46ef24c6
    • Cong Wang's avatar
      sit: update dev->needed_headroom in ipip6_tunnel_bind_dev() · c88f8d5c
      Cong Wang authored 
      When a tunnel device is bound with the underlying device, its
dev->needed_headroom needs to be updated properly. IPv4 tunnels
already do the same in ip_tunnel_bind_dev(). Otherwise we may
not have enough header room for skb, especially after commit
b17f709a ("gue: TX support for using remote checksum offload option").

Fixes: 32b8a8e5 ("sit: add IPv4 over IPv4 support")
Reported-by: default avatarPalash Oswal <oswalpalash@gmail.com>
Link: https://lore.kernel.org/netdev/CAGyP=7fDcSPKu6nttbGwt7RXzE3uyYxLjCSE97J64pRxJP8jPA@mail.gmail.com/
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: default avatarCong Wang <cong.wang@bytedance.com>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Reviewed-by: default avatarKuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c88f8d5c
    • Vlad Buslov's avatar
      net/sched: cls_api: remove block_cb from driver_list before freeing · da94a778
      Vlad Buslov authored 
      Error handler of tcf_block_bind() frees the whole bo->cb_list on error.
However, by that time the flow_block_cb instances are already in the driver
list because driver ndo_setup_tc() callback is called before that up the
call chain in tcf_block_offload_cmd(). This leaves dangling pointers to
freed objects in the list and causes use-after-free[0]. Fix it by also
removing flow_block_cb instances from driver_list before deallocating them.

[0]:
[  279.868433] ==================================================================
[  279.869964] BUG: KASAN: slab-use-after-free in flow_block_cb_setup_simple+0x631/0x7c0
[  279.871527] Read of size 8 at addr ffff888147e2bf20 by task tc/2963

[  279.873151] CPU: 6 PID: 2963 Comm: tc Not tainted 6.3.0-rc6+ #4
[  279.874273] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[  279.876295] Call Trace:
[  279.876882]  <TASK>
[  279.877413]  dump_stack_lvl+0x33/0x50
[  279.878198]  print_report+0xc2/0x610
[  279.878987]  ? flow_block_cb_setup_simple+0x631/0x7c0
[  279.879994]  kasan_report+0xae/0xe0
[  279.880750]  ? flow_block_cb_setup_simple+0x631/0x7c0
[  279.881744]  ? mlx5e_tc_reoffload_flows_work+0x240/0x240 [mlx5_core]
[  279.883047]  flow_block_cb_setup_simple+0x631/0x7c0
[  279.884027]  tcf_block_offload_cmd.isra.0+0x189/0x2d0
[  279.885037]  ? tcf_block_setup+0x6b0/0x6b0
[  279.885901]  ? mutex_lock+0x7d/0xd0
[  279.886669]  ? __mutex_unlock_slowpath.constprop.0+0x2d0/0x2d0
[  279.887844]  ? ingress_init+0x1c0/0x1c0 [sch_ingress]
[  279.888846]  tcf_block_get_ext+0x61c/0x1200
[  279.889711]  ingress_init+0x112/0x1c0 [sch_ingress]
[  279.890682]  ? clsact_init+0x2b0/0x2b0 [sch_ingress]
[  279.891701]  qdisc_create+0x401/0xea0
[  279.892485]  ? qdisc_tree_reduce_backlog+0x470/0x470
[  279.893473]  tc_modify_qdisc+0x6f7/0x16d0
[  279.894344]  ? tc_get_qdisc+0xac0/0xac0
[  279.895213]  ? mutex_lock+0x7d/0xd0
[  279.896005]  ? __mutex_lock_slowpath+0x10/0x10
[  279.896910]  rtnetlink_rcv_msg+0x5fe/0x9d0
[  279.897770]  ? rtnl_calcit.isra.0+0x2b0/0x2b0
[  279.898672]  ? __sys_sendmsg+0xb5/0x140
[  279.899494]  ? do_syscall_64+0x3d/0x90
[  279.900302]  ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[  279.901337]  ? kasan_save_stack+0x2e/0x40
[  279.902177]  ? kasan_save_stack+0x1e/0x40
[  279.903058]  ? kasan_set_track+0x21/0x30
[  279.903913]  ? kasan_save_free_info+0x2a/0x40
[  279.904836]  ? ____kasan_slab_free+0x11a/0x1b0
[  279.905741]  ? kmem_cache_free+0x179/0x400
[  279.906599]  netlink_rcv_skb+0x12c/0x360
[  279.907450]  ? rtnl_calcit.isra.0+0x2b0/0x2b0
[  279.908360]  ? netlink_ack+0x1550/0x1550
[  279.909192]  ? rhashtable_walk_peek+0x170/0x170
[  279.910135]  ? kmem_cache_alloc_node+0x1af/0x390
[  279.911086]  ? _copy_from_iter+0x3d6/0xc70
[  279.912031]  netlink_unicast+0x553/0x790
[  279.912864]  ? netlink_attachskb+0x6a0/0x6a0
[  279.913763]  ? netlink_recvmsg+0x416/0xb50
[  279.914627]  netlink_sendmsg+0x7a1/0xcb0
[  279.915473]  ? netlink_unicast+0x790/0x790
[  279.916334]  ? iovec_from_user.part.0+0x4d/0x220
[  279.917293]  ? netlink_unicast+0x790/0x790
[  279.918159]  sock_sendmsg+0xc5/0x190
[  279.918938]  ____sys_sendmsg+0x535/0x6b0
[  279.919813]  ? import_iovec+0x7/0x10
[  279.920601]  ? kernel_sendmsg+0x30/0x30
[  279.921423]  ? __copy_msghdr+0x3c0/0x3c0
[  279.922254]  ? import_iovec+0x7/0x10
[  279.923041]  ___sys_sendmsg+0xeb/0x170
[  279.923854]  ? copy_msghdr_from_user+0x110/0x110
[  279.924797]  ? ___sys_recvmsg+0xd9/0x130
[  279.925630]  ? __perf_event_task_sched_in+0x183/0x470
[  279.926656]  ? ___sys_sendmsg+0x170/0x170
[  279.927529]  ? ctx_sched_in+0x530/0x530
[  279.928369]  ? update_curr+0x283/0x4f0
[  279.929185]  ? perf_event_update_userpage+0x570/0x570
[  279.930201]  ? __fget_light+0x57/0x520
[  279.931023]  ? __switch_to+0x53d/0xe70
[  279.931846]  ? sockfd_lookup_light+0x1a/0x140
[  279.932761]  __sys_sendmsg+0xb5/0x140
[  279.933560]  ? __sys_sendmsg_sock+0x20/0x20
[  279.934436]  ? fpregs_assert_state_consistent+0x1d/0xa0
[  279.935490]  do_syscall_64+0x3d/0x90
[  279.936300]  entry_SYSCALL_64_after_hwframe+0x46/0xb0
[  279.937311] RIP: 0033:0x7f21c814f887
[  279.938085] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[  279.941448] RSP: 002b:00007fff11efd478 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  279.942964] RAX: ffffffffffffffda RBX: 0000000064401979 RCX: 00007f21c814f887
[  279.944337] RDX: 0000000000000000 RSI: 00007fff11efd4e0 RDI: 0000000000000003
[  279.945660] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
[  279.947003] R10: 00007f21c8008708 R11: 0000000000000246 R12: 0000000000000001
[  279.948345] R13: 0000000000409980 R14: 000000000047e538 R15: 0000000000485400
[  279.949690]  </TASK>

[  279.950706] Allocated by task 2960:
[  279.951471]  kasan_save_stack+0x1e/0x40
[  279.952338]  kasan_set_track+0x21/0x30
[  279.953165]  __kasan_kmalloc+0x77/0x90
[  279.954006]  flow_block_cb_setup_simple+0x3dd/0x7c0
[  279.955001]  tcf_block_offload_cmd.isra.0+0x189/0x2d0
[  279.956020]  tcf_block_get_ext+0x61c/0x1200
[  279.956881]  ingress_init+0x112/0x1c0 [sch_ingress]
[  279.957873]  qdisc_create+0x401/0xea0
[  279.958656]  tc_modify_qdisc+0x6f7/0x16d0
[  279.959506]  rtnetlink_rcv_msg+0x5fe/0x9d0
[  279.960392]  netlink_rcv_skb+0x12c/0x360
[  279.961216]  netlink_unicast+0x553/0x790
[  279.962044]  netlink_sendmsg+0x7a1/0xcb0
[  279.962906]  sock_sendmsg+0xc5/0x190
[  279.963702]  ____sys_sendmsg+0x535/0x6b0
[  279.964534]  ___sys_sendmsg+0xeb/0x170
[  279.965343]  __sys_sendmsg+0xb5/0x140
[  279.966132]  do_syscall_64+0x3d/0x90
[  279.966908]  entry_SYSCALL_64_after_hwframe+0x46/0xb0

[  279.968407] Freed by task 2960:
[  279.969114]  kasan_save_stack+0x1e/0x40
[  279.969929]  kasan_set_track+0x21/0x30
[  279.970729]  kasan_save_free_info+0x2a/0x40
[  279.971603]  ____kasan_slab_free+0x11a/0x1b0
[  279.972483]  __kmem_cache_free+0x14d/0x280
[  279.973337]  tcf_block_setup+0x29d/0x6b0
[  279.974173]  tcf_block_offload_cmd.isra.0+0x226/0x2d0
[  279.975186]  tcf_block_get_ext+0x61c/0x1200
[  279.976080]  ingress_init+0x112/0x1c0 [sch_ingress]
[  279.977065]  qdisc_create+0x401/0xea0
[  279.977857]  tc_modify_qdisc+0x6f7/0x16d0
[  279.978695]  rtnetlink_rcv_msg+0x5fe/0x9d0
[  279.979562]  netlink_rcv_skb+0x12c/0x360
[  279.980388]  netlink_unicast+0x553/0x790
[  279.981214]  netlink_sendmsg+0x7a1/0xcb0
[  279.982043]  sock_sendmsg+0xc5/0x190
[  279.982827]  ____sys_sendmsg+0x535/0x6b0
[  279.983703]  ___sys_sendmsg+0xeb/0x170
[  279.984510]  __sys_sendmsg+0xb5/0x140
[  279.985298]  do_syscall_64+0x3d/0x90
[  279.986076]  entry_SYSCALL_64_after_hwframe+0x46/0xb0

[  279.987532] The buggy address belongs to the object at ffff888147e2bf00
                which belongs to the cache kmalloc-192 of size 192
[  279.989747] The buggy address is located 32 bytes inside of
                freed 192-byte region [ffff888147e2bf00, ffff888147e2bfc0)

[  279.992367] The buggy address belongs to the physical page:
[  279.993430] page:00000000550f405c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x147e2a
[  279.995182] head:00000000550f405c order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[  279.996713] anon flags: 0x200000000010200(slab|head|node=0|zone=2)
[  279.997878] raw: 0200000000010200 ffff888100042a00 0000000000000000 dead000000000001
[  279.999384] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
[  280.000894] page dumped because: kasan: bad access detected

[  280.002386] Memory state around the buggy address:
[  280.003338]  ffff888147e2be00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  280.004781]  ffff888147e2be80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[  280.006224] >ffff888147e2bf00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  280.007700]                                ^
[  280.008592]  ffff888147e2bf80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[  280.010035]  ffff888147e2c000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  280.011564] ==================================================================

Fixes: 59094b1e ("net: sched: use flow block API")
Signed-off-by: default avatarVlad Buslov <vladbu@nvidia.com>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      da94a778
    • Eric Dumazet's avatar
      tcp: fix skb_copy_ubufs() vs BIG TCP · 7e692df3
      Eric Dumazet authored 
      David Ahern reported crashes in skb_copy_ubufs() caused by TCP tx zerocopy
using hugepages, and skb length bigger than ~68 KB.

skb_copy_ubufs() assumed it could copy all payload using up to
MAX_SKB_FRAGS order-0 pages.

This assumption broke when BIG TCP was able to put up to 512 KB per skb.

We did not hit this bug at Google because we use CONFIG_MAX_SKB_FRAGS=45
and limit gso_max_size to 180000.

A solution is to use higher order pages if needed.

v2: add missing __GFP_COMP, or we leak memory.

Fixes: 7c4e983c ("net: allow gso_max_size to exceed 65536")
Reported-by: default avatarDavid Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/netdev/c70000f6-baa4-4a05-46d0-4b3e0dc1ccc8@gmail.com/T/Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7e692df3
    • Cosmo Chou's avatar
      net/ncsi: clear Tx enable mode when handling a Config required AEN · 6f75cd16
      Cosmo Chou authored 
      ncsi_channel_is_tx() determines whether a given channel should be
used for Tx or not. However, when reconfiguring the channel by
handling a Configuration Required AEN, there is a misjudgment that
the channel Tx has already been enabled, which results in the Enable
Channel Network Tx command not being sent.

Clear the channel Tx enable flag before reconfiguring the channel to
avoid the misjudgment.

Fixes: 8d951a75 ("net/ncsi: Configure multi-package, multi-channel modes with failover")
Signed-off-by: default avatarCosmo Chou <chou.cosmo@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6f75cd16
  7. 27 Apr, 2023 9 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7