- 09 Oct, 2018 7 commits
-
-
Lyude Paul authored
Since we need to be able to allow DPMS on->off prop changes after an MST port has disappeared from the system, we need to be able to make sure we can compute a config for the resulting atomic commit. Currently this is impossible when the port has disappeared, since the VCPI slot searching we try to do in intel_dp_mst_compute_config() will fail with -EINVAL. Since the only commits we want to allow on no-longer-present MST ports are ones that shut off display hardware, we already know that no VCPI allocations are needed. So, hardcode the VCPI slot count to 0 when intel_dp_mst_compute_config() is called on an MST port that's gone. Changes since V4: - Don't use mst_port_gone at all, just check whether or not the drm connector is registered - Daniel Vetter Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-5-lyude@redhat.com
-
Lyude Paul authored
Currently we set intel_connector->mst_port to NULL to signify that the MST port has been removed from the system so that we can prevent further action on the port such as connector probes, mode probing, etc. However, we're going to need access to intel_connector->mst_port in order to fixup ->best_encoder() so that it can always return the correct encoder for an MST port to prevent legacy DPMS prop changes from failing. This should be safe, so instead keep intel_connector->mst_port always set and instead just check the status of drm_connector->regustered to signify whether or not the connector has disappeared from the system. Changes since v2: - Add a comment to mst_port_gone (Jani Nikula) - Change mst_port_gone to a u8 instead of a bool, per the kernel bot. Apparently bool is discouraged in structs these days Changes since v4: - Don't use mst_port_gone at all! Just check if the connector is registered or not - Daniel Vetter Signed-off-by:
-
Lyude Paul authored
With the exception of modesets which would switch the DPMS state of a connector from on to off, we want to make sure that we disallow all modesets which would result in enabling a new monitor or a new mode configuration on a monitor if the connector for the display in question is no longer registered. This allows us to stop userspace from trying to enable new displays on connectors for an MST topology that were just removed from the system, without preventing userspace from disabling DPMS on those connectors. Changes since v5: - Fix typo in comment, nothing else Signed-off-by:
-
Ville Syrjälä authored
As long as the connector was zeroed during allocation calling intel_panel_fini() is safe even if we haven't initialized the panel struct explicitly. So let's drop the useless eDP check from dp connector destruction. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181008134641.24868-2-ville.syrjala@linux.intel.comReviewed-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Ville Syrjälä authored
Currently we destroy the backlight during connector unregistration. That means the final modeset performed by drm_atomic_helper_shutdown() will leave the backlight on. We don't want that so let's just move intel_panel_destroy_backlight() into intel_panel_fini() which gets called during connector destuction. We still unregister the user visible backlight device during connector unregistration. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Anuj Phogat authored
Incorrect TDL's SSP address shift in SARB for 16:6 & 18:8 modes. Disable the Sampler state prefetch functionality in the SARB by programming 0xB000[30] to '1'. This is to be done at boot time and the feature must remain disabled permanently. Fixes flaky tex-mip-level-selection* piglit tests with Mesa i965 driver. Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
Anuj Phogat <anuj.phogat@gmail.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
-
Radhakrishna Sripada authored
Shader feature to prefetch binding tables does not support 16:6 18:8 BTP formats. Enabling fault handling could result in hangs with faults. Disabling demand prefetch would disable binding table prefetch. V2: Fix the stepping rivision to B0(Mika) References: HSDES#1406609255, HSDES#1406573985 Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by:
-
- 08 Oct, 2018 12 commits
-
-
Chris Wilson authored
s/crtc/crtc_state/ for the kernel doc as well as the params. Fixes: 65c307fd ("drm/i915: Make shared dpll functions take crtc_state, v3.") Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181008104808.17457-1-chris@chris-wilson.co.uk
-
Ville Syrjälä authored
Let's try to stick a common naming pattern in all the plane init funcs. v2: Rebase due to color_encoding/range props Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181005125817.22576-12-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Use a more familiar naming pattern for our variables in the sprite plane init function. v2: Drop the redundant 'plane' from plane_formats and num_planes_formats too v3: Rebase due to ->max_stride() and ->check_plane() changes Signed-off-by: -
Ville Syrjälä authored
There's not much point in following the primary vs. sprite split for the SKL+ universal plane init code. The only difference is of our own doing in the form of the .check_plane(). Let's make a small exception for that little detail and otherwise share the same code to initialize all the universal planes. Eventually we should eliminate the mess around .check_plane() as well, but for now let's be happy with some code reduction. v2: Remember to set up plane->has_fbc Make skl_plane_has_ccs() static v3: Rebase due to NV12, rename some variables v4: Don't leave the color_encoding/range props behind v5: Rebase dur to blend properties, skl_plane_max_stride() and skl_plane_check() v6: Make skl_update_plane() static Signed-off-by: -
Ville Syrjälä authored
Pull the common plane+plane_state allocation into a small helper. Reduces the amount of boilerplate in the plane initialization functions. Signed-off-by:
-
Ville Syrjälä authored
No point in having each caller of intel_create_plane_state() initialize the scaler_id to -1. Instead just do it in intel_create_plane_state(). Previously we left scaler_id at 0 for pre-SKL platforms, but I can't see how initializing it to -1 always would cause any harm. Signed-off-by:
-
Ville Syrjälä authored
All SKL+ universal planes support the same set of formats (with the exception of NV12 which we don't expose yet). Make the format lists for primary and sprites the same. And make the format list const while at it. v2: Deal with the "planar" format list as well Signed-off-by:
-
Ville Syrjälä authored
Plane scaling is not supported with specific pixel formats. Disallow plane scaling when such a format is used. Currently the only such pixel format we expose is C8, but in case we add more in the future let's make it easy to deal with them. v2: Redo due to plane_check() refactoring Signed-off-by:
-
Ville Syrjälä authored
All CNL universal planes support horizontal mirroring. Currently we expose the capability only for the primary plane. Expose it for the overlay planes as well. Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
-
Ville Syrjälä authored
enum i9xx_plane_id namespace is not valid for any sprite plane, so let's not even populate plane->i9xx_plane. Signed-off-by:
-
Ville Syrjälä authored
We're currently not providing the possible_crtcs mask to drm_universal_plane_init() for primary/cursor planes. While that does work on account of drm_crtc_init_with_planes() filling those up for us, it's inconsisten with what we're doing for sprite planes. Let's just always pass the possible_crtcs bitmask to drm_universal_plane_init(). This does assume that crtc->index == pipe. But we're already making that assumption elsewhere so it doesn't seem like a very big sin here. Signed-off-by:
-
Ville Syrjälä authored
plane_funcs can be cosnt. Make them so. v2: Rebase due to per-platforms plane_funcs Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
- 05 Oct, 2018 21 commits
-
-
José Roberto de Souza authored
ALPM is a requirement and we don't need to keep it's cached, what were done in commit 97c9de66 ("drm/i915/psr: Fix ALPM cap check for PSR2") but the alpm was not removed from i915_psr. Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
José Roberto de Souza authored
This WA also works fine for PSR2, triggering a selective update when possible. Acked-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
José Roberto de Souza authored
We are already handling all PSR2 errors, so we can drop this TODO. Reviewed-by:
-
José Roberto de Souza authored
ICL spec states that this bit is now reserved. Bspec: 7722 v2(Dhinakaran and Jani): - instead of remove bit in gen11 now only setting if if gen < 11 - changed commit title Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:
-
José Roberto de Souza authored
Now both PSR and PSR2 have the same exit mask, so let's share then instead of have the same code 2 times. Reviewed-by:
-
Anusha Srivatsa authored
Add missing MODULE_FIRMWARE while loading DMC ICL. v2: Add Fixes tag. (Rodrigo) v3: Rebase by Rodrigo after commit 7fe78985 ("drm/i915/csr: restructure CSR firmware definition macros") v4: Rodrigo fixing his own mess on commit mentioning on v3 comment above. Fixes: 4445930f ("firmware/dmc/icl: load v1.07 on icelake.") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v2) Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181004223613.19938-1-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
No functional change. But just a minor change to keep up with Spec, since it has changed since commit c3cc39c5 ("drm/i915/icl: program mbus during pipe enable") The instructions previously said to program pipe's B credit = 24 / number of pipes, which is 8 for ICL. Now the spec gives us direct values independent of number of pipes. Let's keep in sync. Also just a reorder on fields to make easier to compare against spec's sequence: A -> BW -> B. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Arthur J Runyan <arthur.j.runyan@intel.com> Signed-off-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181004151814.6054-1-rodrigo.vivi@intel.com
-
Lee, Shawn C authored
Amber Lake used the same gen graphics as Kaby Lake. Kernel driver should configure KBL's DDI buffer setting for AML ULX as well. So far, driver would load DDI translation table that used for KBL H/S platform and apply it on AML devices. But AML is belong to ULX series. This change will lead driver to apply KBL-Y's DDI table for AML devices to avoid unexpected eDP/DP signal quality issue. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jose Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Lee, Shawn C <shawn.c.lee@intel.com> Reviewed-by:
-
Lee, Shawn C authored
According to patch "drm/i915/aml: Introducing Amber Lake platform" (e3646724). Add a new marco for AML ULX GT2 devices. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jose Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
commit 'b9be7853 ("drm/i915/whl: Introducing Whiskey Lake platform")' introduced WHL by moving some of CFL IDs here and using the Spec information of "U43" for most of IDs what appeared to be GT3. However when propagating the change to Mesa, Lionel noticed that based on number of execution unities the classification here seems at least strange. So, let's move for now with the information we trust more: the number of EUs. So we are able to propagate this change across the stack without getting stuck forever. Reference: https://patchwork.freedesktop.org/patch/246695/ Fixes: b9be7853 ("drm/i915/whl: Introducing Whiskey Lake platform") Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: David Airlie <airlied@linux.ie> Signed-off-by:
-
Ville Syrjälä authored
Sprite enable on ILK-IVB may take two frames to complete when the hardware is in big FIFO mode (LP1+). That is not entirely great as it means the sprite enable may actually happen one frame after we've already signalled flip completion. At the very least crc checks may fail due to the sprite not yet being visible when we expect it. We already have code to deal with big FIFO mode when it comes to the sprite scaling on IVB (WaCxSRDisabledForSpriteScaling:ivb). Let's extend that workaround to kick in whenever the sprite is in the process of being enabled. Also ILK/SNB bspec has some notes to indicate that we should most likely also do the sprite scaling w/a on all three platforms, so let's do that as well. Pretty easy to reproduce on SNB/IVB. ILK has proved more elusive, but let's trust the spec and include it as well. v2: Make sure the pipe is active before the vblank wait Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Testcase: igt/kms_plane/pixel-format-pipe-*-planes Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107749Signed-off-by:
-
Maarten Lankhorst authored
These functions already have a pointer to the correct state, so use it instead of crtc->config. Changes since v1: - Move pll changes to the pll patch. Signed-off-by:
-
Maarten Lankhorst authored
Fixing chv_set_phy_signal_level() still requires too many levels of indirection to pass crtc_state along, but chv_data_lane_soft_reset() already has a crtc_state we can use. Signed-off-by:
-
Maarten Lankhorst authored
We're already using crtc_state here and made sure no modeset is occurring by looking at conn_state->commit->hw_done, so there's no need to dereference crtc->config. Signed-off-by:
-
Maarten Lankhorst authored
fbdev init shouldn't race with userspace since it's called from intel_modeset_init, so it's safe to dereference crtc->state and assume nothing changed yet. At least not more harmful than crtc->config. Signed-off-by:
-
Maarten Lankhorst authored
Pass the full state to intel_ddi_clk_select, so we can pass it to icl_pll_to_ddi_pll_sel instead of passign the crtc and having to dereference crtc->config Signed-off-by:
-
Maarten Lankhorst authored
Instead of passing crtc and dereferencing crtc->config, pass the correct crtc_state and obtain the crtc pointer from there. Signed-off-by:
-
Maarten Lankhorst authored
Do not rely on crtc->config any more. Remove the assertion from ibx_pch_dpll_disable, because we the dpll state tracking should already handle this case correctly. Changes since v1: - Fixup accidental early return in intel_prepare_shared_dpll, oops! Changes since v2: - Don't use the freed crtc_state in intel_crtc_disable_noatomic() Signed-off-by:
-
Maarten Lankhorst authored
Instead of passing crtc and dereferencing crtc->config, passs the correct crtc_state and obtain the crtc pointer from there. Changes since v1: - Move vlv/chv changes and i9xx_set_pll_dividers changes from crtc_enable/disable patches to here. - Add commit message. Signed-off-by:
-
Maarten Lankhorst authored
Rename intel_crtc to crtc, and pass crtc_state instead of looking at crtc->config. Signed-off-by:
-
Maarten Lankhorst authored
Rename intel_crtc to crtc, and pass crtc_state so we don't have to dereference crtc->config. Signed-off-by:
-
