- 28 Jan, 2022 10 commits
-
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_byname(). Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Jacopo Mondi authored
The 'maxim,gpio-poc' property is used when the remote camera power-over-coax is controlled by one of the MAX9286 gpio lines, to instruct the driver about which line to use and what the line polarity is. Add to the max9286 driver support for parsing the newly introduced property and use it if available in place of the usual supply, as it is not possible to establish one as consumer of the max9286 gpio controller. If the new property is present, no gpio controller is registered and 'poc-supply' is ignored. In order to maximize code re-use, break out the max9286 gpio handling function so that they can be used by the gpio controller through the gpio-consumer API, or directly by the driver code. Wrap the power up and power down routines to their own function to be able to use either the gpio line directly or the supply. This will make it easier to control the remote camera power at run time. Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by:
-
Jacopo Mondi authored
Define a new vendor property in the maxim,max9286 binding schema. The new property allows to declare that the remote camera power-over-coax is controlled by one of the MAX9286 gpio lines. As it is currently not possible to establish a regulator as consumer of the MAX9286 gpio controller for this purpose, the property allows to declare that the camera power is controlled by the MAX9286 directly. The property accepts a gpio-index (0 or 1) and one line polarity flag as defined by dt-bindings/gpio/gpio.h. Reviewed-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Jacopo Mondi authored
The dt-bindings examples are usually indented with 4 spaces. The maxim,max9286 schema has the example indented with only 2 spaces, re-indent it. Cosmetic change only. Reviewed-by:
-
- 24 Jan, 2022 5 commits
-
-
Sean Young authored
Re-write without unnecessary shifts. Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Sean Young authored
This IR receiver has two limitations: 1) Any IR pulse or space longer than 12ms will be truncated to 12ms 2) Any pulses/spaces after the first 68 are lost ir_raw_event_reset() won't help here. If the IR cannot be decoded, any decoder should reset itself, and if it does not, this is a bug in the decoder. Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
-
Sean Young authored
The ir receiver generates an interrupt with the IR data, once a space of at least ok_count is has been seen. Currently this is about 110ms; when holding down a button on a nec remote, no such space is seen until the button is released. This means nothing happens until you release the button. The sample rate is fixed at 46us, so the maximum space that can be encoded is about 12ms. So, the set ok_count above that at 23ms. Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
-
Sean Young authored
When a driver reports a timeout, no more IR activity will be reported until the next pulse. A space is inserted between the timeout and the next pulse, based on ktime. The timeout reports already a duration, so this duration should not be added to the gap. Otherwise there is no change to the functionality. Signed-off-by:
-
Peiwei Hu authored
Fix leak in error path. Signed-off-by:
Peiwei Hu <jlu.hpw@foxmail.com> Signed-off-by:
-
- 23 Jan, 2022 25 commits
-
-
Yunfei Dong authored
There are only two lines in mtk_vcodec_release_enc_pm, using pm_runtime_disable and put_device instead directly. Move pm_runtime_enable outside mtk_vcodec_release_enc_pm to symmetry with pm_runtime_disable, after that, rename mtk_vcodec_init_enc_pm to *_clk since it only has clock operations now. Signed-off-by:
Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by:
Yong Wu <yong.wu@mediatek.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
-
Yunfei Dong authored
There are only two lines in mtk_vcodec_release_dec_pm, using pm_runtime_disable and put_device instead directly. Move pm_runtime_enable outside mtk_vcodec_init_dec_pm to symmetry with pm_runtime_disable, after that, rename mtk_vcodec_init_dec_pm to *_clk since it only has clock operations now. Signed-off-by:
-
Yunfei Dong authored
There is just one core thread, in order to separate different hardware, using codec type to separeate it in scp driver. Signed-off-by:
-
Yunfei Dong authored
Add core dec and dec end ipi msg: AP_IPIMSG_DEC_CORE/AP_IPIMSG_DEC_CORE_END. Signed-off-by:
-
Yunfei Dong authored
Use the dma_set_mask_and_coherent helper to set vdec DMA bit mask to support 34bits iova space(16GB) that the mt8192 iommu HW support. Whole the iova range separate to 0~4G/4G~8G/8G~12G/12G~16G, regarding which iova range VDEC actually locate, it depends on the dma-ranges property of vdec dtsi node. Signed-off-by:
-
Yunfei Dong authored
Add work queue to process core hardware information. First, get lat_buf from message queue, then call core hardware of each codec(H264/VP9/AV1) to decode, finally puts lat_buf back to the message. Signed-off-by:
Steve Cho <stevecho@chromium.org> Signed-off-by:
-
Yunfei Dong authored
For add new hardware, not only need to lock lat hardware, also need to lock core hardware in case of different instance start to decoder at the same time. Signed-off-by:
-
Yunfei Dong authored
Generalizes power and clock on/off interfaces to support different hardware. Signed-off-by:
-
Yunfei Dong authored
For lat and core architecture, lat thread will send message to core thread when lat decode done. Core hardware will use the message from lat to decode, then free message to lat thread when decode done. Signed-off-by:
-
Yunfei Dong authored
Adds irq interface for multi hardware. Signed-off-by:
-
Yunfei Dong authored
Separates different architecture for hardware: pure_sin_core and lat_sin_core. MT8183 is pure single core. Uses .hw_arch to distinguish. Signed-off-by:
-
Yunfei Dong authored
There are more than two hardwares for decoder: LAT0, LAT1 and CORE. In order to manage these hardwares, register each hardware as independent platform device for the larbs are different. Each hardware module controls its own information which includes interrupt/power/clocks/registers. Calling of_platform_populate in parent device, and use subdev_bitmap to record whether the hardwares are registered. Signed-off-by:
-
Yunfei Dong authored
Adds MT8192's compatible "mediatek,mt8192-vcodec-dec". Adds MT8192's device private data mtk_lat_sig_core_pdata. Signed-off-by:
-
Yunfei Dong authored
Adds decoder dt-bindings for mt8192. Signed-off-by:
-
Yunfei Dong authored
Separate decoder and encoder document for the dts are big difference. Signed-off-by:
-
Yunfei Dong authored
When mtk vcodec decoder is build as a module, we need to export mtk-vcodec-dec pm functions to make them visible by the other components. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@collabora.com> Signed-off-by:
-
Yunfei Dong authored
Using the needed params for pm init/release function and remove unused param mtkdev in 'struct mtk_vcodec_pm'. Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Reviewed-by:
-
Yunfei Dong authored
Vdec and venc can use the same function to wake up interrupt event. Signed-off-by:
-
Yunfei Dong authored
Different platforms may have different numbers of register bases. Gets the numbers of register bases from dts (sizeof(u32) * 4 bytes for each). Signed-off-by:
-
Benjamin Gaignard authored
Reference Picture Set lists provide indices of short and long term reference in DBP array. Fix Hantro to not do a look up in DBP entries. Make documentation more clear about it. [hverkuil: fix typo in commit log] Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
-
Benjamin Gaignard authored
Marking a picture as long-term reference is valid for DPB but not for RPS. Change flag name to match with the description in HEVC spec chapter "8.3.2 Decoding process for reference picture set". PocStCurrBefore, PocStCurrAfter, PocLtCurr lists could be built by the kernel from the DPB entries struct v4l2_hevc_dpb_entry, using the information in the rps field. This way RPS flags becomes useless and are removed. This patch breaks the staging HEVC API because it introduces a new flag, changes a field name in v4l2_hevc_dpb_entry structure and removes V4L2_HEVC_DPB_ENTRY_RPS_* flags. [hverkuil: fixed some typos] Signed-off-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by:
-
Eugen Hristev authored
The ISC can dump the 8 bit and 10 bit raw bayer formats directly to the memory. Thus, add them to the supported output format list. Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by:
-
Eugen Hristev authored
Fix the mbus code for UYVY input format type to the right color rotation. Signed-off-by:
-
Eugen Hristev authored
White balance computed gains can overflow above the 13 bits hardware coefficient that can be used, in some specific scenarios like a subexposure from the sensor when the image is mostly black. In this case the computed gain has to be clamped to the maximum value allowed by the hardware. Signed-off-by:
-
Eugen Hristev authored
Add debug messages that make it easier to debug white balance algorithm. Signed-off-by:
-
