- 25 Jun, 2018 2 commits
-
-
Parav Pandit authored
This is really just a CM support function, normally a multicast address does not have a specific SGID - but the RDMA CM usage model does restrict things to the netdevice the CM id is bound to, at least for roce case. Store the selected table entry in the sgid_attr for everything else to use. Signed-off-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com>
-
Parav Pandit authored
The work completion is inspected to determine what dgid table entry was used to receieve the packet, produces a sgid_attr that matches and sticks it in the ah_attr. All callers of this function are now required to release the ah_attr on success. Signed-off-by:
-
- 22 Jun, 2018 12 commits
-
-
Michael J. Ruhl authored
The INTx IRQ support does not work for all HF1 IRQ handlers (specifically the receive data IRQs). Remove all supporting code for the INTx IRQ. If the requested MSIx vector request is unsuccessful, do not allow the driver to continue. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Kamenee Arumugam <kamenee.arumugam@intel.com> Reviewed-by:
Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
Many fields in ctxtdata are incorrectly sized and the organization of the fields within the structure is a jumble. Fix by: - Correcting oversize fields. - Putting fields common to all contexts at the top with hot fields at the top. - Moving PSM fields to the bottom of the structure. Reviewed-by:
-
Mike Marciniszyn authored
Remove the sizeable cache of the chip sizing CSRs and replace with CSR reads as needed. Reviewed-by:
-
Mike Marciniszyn authored
Reviewed-by:
-
Mike Marciniszyn authored
Fields in this structure are sized excessively based on hardware limitations and input values. Fix by reducing fields as appropriate and repositioning to close holes in the structure. Reviewed-by:
-
Mike Marciniszyn authored
It is only ever written. Reviewed-by:
-
Mike Marciniszyn authored
The usage of this ctxt data field is not hot path and the value can be computed on demand to cut down the ctxtdata bloat. Reviewed-by:
-
Parav Pandit authored
If we already hold the table->lock when doing the kref_put it means we are in a context where it is safe to do the deletion synchronously, with no need for the work queue. This helps to eliminate issues when GID change is requested as part of MAC address change or bonding event change where expectation is to replace the GID almost immediately. Fixes: b150c386 ("IB/core: Introduce GID entry reference counts") Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
-
Parav Pandit authored
When sending multicast leave request, consider the net ns in which this cm_id is created. Code was duplicated in cma_leave_mc_groups() and rdma_leave_multicast(), which is now done using a helper function cma_leave_roce_mc_group(). Fixes: bee3c3c9 ("IB/cma: Join and leave multicast groups with IGMP") Reviewed-by:
-
Jason Gunthorpe authored
In this context the uobject is not allowed to be NULL, so type is the same as uobject->type, and at least for IDR, id is the same as uobject->id. FD objects should never handle the FD number outside the uAPI boundary code. Suggested-by:
Guy Levi <guyle@mellanox.com> Signed-off-by:
-
Jason Gunthorpe authored
For dependencies, branch based on 'mellanox/mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git Pull RoCE ICRC counters from Leon Romanovsky: ==================== This series exposes RoCE ICRC counter through existing RDMA hw_counters sysfs interface. The first patch has all HW definitions in mlx5_ifc.h file and second patch is the actual counter implementation. ==================== * branch 'icrc-counter': IB/mlx5: Support RoCE ICRC encapsulated error counter net/mlx5: Add RoCE RX ICRC encapsulated counter
-
Talat Batheesh authored
This patch adds support to query the counter that counts the RoCE packets with corrupted ICRC (Invariant Cyclic Redundancy Code). This counter will be under /sys/class/infiniband/<mlx5-dev>/ports/<port>/hw_counters/ rx_icrc_encapsulated - The number of RoCE packets with ICRC error. Signed-off-by:
Talat Batheesh <talatb@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
-
- 21 Jun, 2018 1 commit
-
-
Talat Batheesh authored
Add capability bit in PCAM register and RoCE ICRC error counter to PPCNT register. Signed-off-by:
-
- 19 Jun, 2018 23 commits
-
-
Leon Romanovsky authored
Put all relevant checks for transport domain in the mlx5_ib_alloc/dealloc_transport_domain functions. Signed-off-by:
-
Mike Marciniszyn authored
Move some s_flags defines out of rdmavt and into hfi1 because they are hfi1 specific and therefore should remain in the driver instead of bubbling up to rdmavt. Document device specific ranges in rdmavt and remap those in hfi1. Reviewed-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
The field is based on a constant that can never change. Use the define to assign the register instead. Reviewed-by:
-
Mike Marciniszyn authored
This field should be in ctxtdata to allow for better locality of access by eliminating a dd dereference. The new field is now side-by-side with rcvhdrqentsize since the rhf_offset is a function of the rcvhdrqentsize. Both fields are now correctly sized as u8. Reviewed-by:
-
Mike Marciniszyn authored
The current implementation precludes having receive context specific packet type receive handlers. Fix this by adding adding c99 const array for the existing handlers and remove the current 72 bytes of pointers from devdata. A new pointer in hfi1_ctxtdata will point to the const array. Reviewed-by:
-
Yishai Hadas authored
Expose DEVX tree to be used by upper layers. Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Yishai Hadas authored
Return the matching device EQN for a given user vector number via the DEVX interface. Note: EQs are owned by the kernel and shared by all user processes. Basically, a user CQ can point to any EQ. The kernel doesn't enforce any such limitation today either. Signed-off-by:
-
Yishai Hadas authored
Add support to register a memory with the firmware via the DEVX interface. The driver translates a given user address to ib_umem then it will register the physical addresses with the firmware and get a unique id for this registration to be used for this virtual address. Signed-off-by:
-
Yishai Hadas authored
Return a device UAR index for a given user index via the DEVX interface. Security note: The hardware protection mechanism works like this: Each device object that is subject to UAR doorbells (QP/SQ/CQ) gets a UAR ID (called uar_page in the device specification manual) upon its creation. Then upon doorbell, hardware fetches the object context for which the doorbell was rang, and validates that the UAR through which the DB was rang matches the UAR ID of the object. If no match the doorbell is silently ignored by the hardware. Of course, the user cannot ring a doorbell on a UAR that was not mapped to it. Now in devx, as the devx kernel does not manipulate the QP/SQ/CQ command mailboxes (except tagging them with UID), we expose to the user its UAR ID, so it can embed it in these objects in the expected specification format. So the only thing the user can do is hurt itself by creating a QP/SQ/CQ with a UAR ID other than his, and then in this case other users may ring a doorbell on its objects. The consequence of that will be that another user can schedule a QP/SQ of the buggy user for execution (just insert it to the hardware schedule queue or arm its CQ for event generation), no further harm is expected. Signed-off-by:
-
Yishai Hadas authored
Add support in DEVX for modify and query commands, the required lock is taken (i.e. READ/WRITE) by the KABI infrastructure accordingly. Signed-off-by:
-
Yishai Hadas authored
Add support to create and destroy firmware objects via the DEVX interface. Signed-off-by:
-
Yishai Hadas authored
Add support to run general firmware command via the DEVX interface. A command that works on some object (e.g. CQ, WQ, etc.) will be added in next patches while maintaining the required object lock. Signed-off-by:
-
Yishai Hadas authored
Introduce DEVX to enable direct device commands in downstream patches from this series. In that mode of work the firmware manages the isolation between processes' resources and as such a DEVX user id is created and assigned to the given user context upon allocation request. A capability check is done to make sure that this feature is really supported by the firmware prior to creating the DEVX user id. Signed-off-by:
-
Yishai Hadas authored
Drivers that use the IOCTL API may have the ib_uverbs_file and need a way to get the related ib_ucontext from it, this is enabled by this patch. Downstream patches from this series will use it. Signed-off-by:
-
Yishai Hadas authored
Introduce a new macro to be used for global methods on a singleton object. This macros sets internally the type_attrs to be NULL as such an object can't be created. Downstream patches from this series will use this macro. Signed-off-by:
-
Matan Barak authored
The ioctl parser framework wrongly assumed that each namespace is populated. This could lead to NULL dereferences. Fix the parser to always check that a given namespace indeed exists. Fixes: fac9658c ("IB/core: Add new ioctl interface") Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
-
Matan Barak authored
Sometimes the uverbs uAPI doesn't really care about the structure it gets from user-space. All it wants to do is to allocate enough space and send it to the hardware/provider driver. Adding a UVERBS_ATTR_MIN_SIZE that could be used for this scenarios. We use USHRT_MAX as the kernel known size to bypass any zero validations. Signed-off-by:
-
Matan Barak authored
Adding UVERBS_ATTR_SPEC_F_ALLOC_AND_COPY flag to PTR_IN attributes. By using this flag, the parse automatically allocates and copies the user-space data. This data is accessible by using uverbs_attr_get_len and uverbs_attr_get_alloced_ptr inline accessor functions from the handler. Signed-off-by:
-
Matan Barak authored
uverbs_finalize_objects is currently used only to commit or abort objects. Since we want to add automatic allocation/free of PTR_IN attributes, moving it to uverbs_ioctl.c and renamit it to uverbs_finalize_attrs. Signed-off-by:
-
Matan Barak authored
As provider drivers could use UVERBS_ATTR_FD and UVERBS_ATTR_IDR macros need to export them. Signed-off-by:
-
Jason Gunthorpe authored
From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git * branch 'mellanox/mlx5-next': net/mlx5: Expose DEVX specification net/mlx5: Prevent warns in dmesg upon firmware commands
-
Yishai Hadas authored
This patch updates the mlx5_ifc structures and command interface to support DEVX. Signed-off-by:
-
Yishai Hadas authored
When DEVX is used application builds by itself the command mail box, this patch prevents warns upon firmware commands as of invalid user space usage. In addition, A failure in destroy_mkey command was changed to be printed only under debug mode. This prevents a redundant warn when a memory window was used with rereg_mr and finally was some kernel cleanup as of reset flow/process termination. In that case this command might temporarily fails as part of the cleanup but finally it expects to succeed. Signed-off-by:
-
- 18 Jun, 2018 2 commits
-
-
Bharat Potnuri authored
memcpy() of mapped addresses is done twice in c4iw_create_listen(), removing the duplicate memcpy(). Fixes: 170003c8 ("iw_cxgb4: remove port mapper related code") Reviewed-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by:
-
Steve Wise authored
This patch replaces the ib_device_attr.max_sge with max_send_sge and max_recv_sge. It allows ulps to take advantage of devices that have very different send and recv sge depths. For example cxgb4 has a max_recv_sge of 4, yet a max_send_sge of 16. Splitting out these attributes allows much more efficient use of the SQ for cxgb4 with ulps that use the RDMA_RW API. Consider a large RDMA WRITE that has 16 scattergather entries. With max_sge of 4, the ulp would send 4 WRITE WRs, but with max_sge of 16, it can be done with 1 WRITE WR. Acked-by:
Sagi Grimberg <sagi@grimberg.me> Acked-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Selvin Xavier <selvin.xavier@broadcom.com> Acked-by:
Shiraz Saleem <shiraz.saleem@intel.com> Acked-by:
-
