Skip to content

L
linux
Switch branch/tag
  1. 01 Aug, 2023 11 commits
  3. 31 Jul, 2023 8 commits
    • Michal Schmidt's avatar
      octeon_ep: initialize mbox mutexes · 611e1b01
      Michal Schmidt authored 
      The two mbox-related mutexes are destroyed in octep_ctrl_mbox_uninit(),
but the corresponding mutex_init calls were missing.
A "DEBUG_LOCKS_WARN_ON(lock->magic != lock)" warning was emitted with
CONFIG_DEBUG_MUTEXES on.

Initialize the two mutexes in octep_ctrl_mbox_init().

Fixes: 577f0d1b ("octeon_ep: add separate mailbox command and response queues")
Signed-off-by: default avatarMichal Schmidt <mschmidt@redhat.com>
Reviewed-by: default avatarLeon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230729151516.24153-1-mschmidt@redhat.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      611e1b01
    • Jakub Kicinski's avatar
      bnxt: don't handle XDP in netpoll · 37b61cda
      Jakub Kicinski authored 
      Similarly to other recently fixed drivers make sure we don't
try to access XDP or page pool APIs when NAPI budget is 0.
NAPI budget of 0 may mean that we are in netpoll.

This may result in running software IRQs in hard IRQ context,
leading to deadlocks or crashes.

To make sure bnapi->tx_pkts don't get wiped without handling
the events, move clearing the field into the handler itself.
Remember to clear tx_pkts after reset (bnxt_enable_napi())
as it's technically possible that netpoll will accumulate
some tx_pkts and then a reset will happen, leaving tx_pkts
out of sync with reality.

Fixes: 322b87ca ("bnxt_en: add page_pool support")
Reviewed-by: default avatarAndy Gospodarek <gospo@broadcom.com>
Reviewed-by: default avatarMichael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230728205020.2784844-1-kuba@kernel.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      37b61cda
    • Rafal Rogalski's avatar
      ice: Fix RDMA VSI removal during queue rebuild · 4b31fd4d
      Rafal Rogalski authored 
      During qdisc create/delete, it is necessary to rebuild the queue
of VSIs. An error occurred because the VSIs created by RDMA were
still active.

Added check if RDMA is active. If yes, it disallows qdisc changes
and writes a message in the system logs.

Fixes: 348048e7 ("ice: Implement iidc operations")
Signed-off-by: default avatarRafal Rogalski <rafalx.rogalski@intel.com>
Signed-off-by: default avatarMateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: default avatarKamil Maziarz <kamil.maziarz@intel.com>
Tested-by: default avatarBharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: default avatarLeon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230728171243.2446101-1-anthony.l.nguyen@intel.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      4b31fd4d
    • Edward Cree's avatar
      sfc: fix field-spanning memcpy in selftest · 55c1528f
      Edward Cree authored 
      Add a struct_group for the whole packet body so we can copy it in one
 go without triggering FORTIFY_SOURCE complaints.

Fixes: cf60ed46 ("sfc: use padding to fix alignment in loopback test")
Fixes: 30c24dd8 ("sfc: siena: use padding to fix alignment in loopback test")
Fixes: 1186c6b3 ("sfc: falcon: use padding to fix alignment in loopback test")
Reviewed-by: default avatarAndy Moreton <andy.moreton@amd.com>
Tested-by: default avatarAndy Moreton <andy.moreton@amd.com>
Signed-off-by: default avatarEdward Cree <ecree.xilinx@gmail.com>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230728165528.59070-1-edward.cree@amd.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      55c1528f
    • Martin Kohn's avatar
      net: usb: qmi_wwan: add Quectel EM05GV2 · d4480c9b
      Martin Kohn authored 
      Add support for Quectel EM05GV2 (G=global) with vendor ID
0x2c7c and product ID 0x030e

Enabling DTR on this modem was necessary to ensure stable operation.
Patch for usb: serial: option: is also in progress.

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=030e Rev= 3.18
S:  Manufacturer=Quectel
S:  Product=Quectel EM05-G
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: default avatarMartin Kohn <m.kohn@welotec.com>
Link: https://lore.kernel.org/r/AM0PR04MB57648219DE893EE04FA6CC759701A@AM0PR04MB5764.eurprd04.prod.outlook.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      d4480c9b
    • Duoming Zhou's avatar
      net: usb: lan78xx: reorder cleanup operations to avoid UAF bugs · 1e7417c1
      Duoming Zhou authored 
      The timer dev->stat_monitor can schedule the delayed work dev->wq and
the delayed work dev->wq can also arm the dev->stat_monitor timer.

When the device is detaching, the net_device will be deallocated. but
the net_device private data could still be dereferenced in delayed work
or timer handler. As a result, the UAF bugs will happen.

One racy situation is shown below:

      (Thread 1)                 |      (Thread 2)
lan78xx_stat_monitor()           |
 ...                             |  lan78xx_disconnect()
 lan78xx_defer_kevent()          |    ...
  ...                            |    cancel_delayed_work_sync(&dev->wq);
  schedule_delayed_work()        |    ...
  (wait some time)               |    free_netdev(net); //free net_device
  lan78xx_delayedwork()          |
  //use net_device private data  |
  dev-> //use                    |

Although we use cancel_delayed_work_sync() to cancel the delayed work
in lan78xx_disconnect(), it could still be scheduled in timer handler
lan78xx_stat_monitor().

Another racy situation is shown below:

      (Thread 1)                |      (Thread 2)
lan78xx_delayedwork             |
 mod_timer()                    |  lan78xx_disconnect()
                                |   cancel_delayed_work_sync()
 (wait some time)               |   if (timer_pending(&dev->stat_monitor))
             	                |       del_timer_sync(&dev->stat_monitor);
 lan78xx_stat_monitor()         |   ...
  lan78xx_defer_kevent()        |   free_netdev(net); //free
   //use net_device private data|
   dev-> //use                  |

Although we use del_timer_sync() to delete the timer, the function
timer_pending() returns 0 when the timer is activated. As a result,
the del_timer_sync() will not be executed and the timer could be
re-armed.

In order to mitigate this bug, We use timer_shutdown_sync() to shutdown
the timer and then use cancel_delayed_work_sync() to cancel the delayed
work. As a result, the net_device could be deallocated safely.

What's more, the dev->flags is set to EVENT_DEV_DISCONNECT in
lan78xx_disconnect(). But it could still be set to EVENT_STAT_UPDATE
in lan78xx_stat_monitor(). So this patch put the set_bit() behind
timer_shutdown_sync().

Fixes: 77dfff5b ("lan78xx: Fix race condition in disconnect handling")
Signed-off-by: default avatarDuoming Zhou <duoming@zju.edu.cn>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1e7417c1
    • Rafał Miłecki's avatar
      dt-bindings: net: mediatek,net: fixup MAC binding · 8469c7f5
      Rafał Miłecki authored 
      1. Use unevaluatedProperties
It's needed to allow ethernet-controller.yaml properties work correctly.

2. Drop unneeded phy-handle/phy-mode

3. Don't require phy-handle
Some SoCs may use fixed link.

For in-kernel MT7621 DTS files this fixes following errors:
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@0: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+'
        From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@0: 'phy-handle' is a required property
        From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@1: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+'
        From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@1e100000: mac@1: 'phy-handle' is a required property
        From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
Signed-off-by: default avatarRafał Miłecki <rafal@milecki.pl>
Reviewed-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8469c7f5
    • Kuniyuki Iwashima's avatar
      net/sched: taprio: Limit TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME to INT_MAX. · e7397184
      Kuniyuki Iwashima authored 
      syzkaller found zero division error [0] in div_s64_rem() called from
get_cycle_time_elapsed(), where sched->cycle_time is the divisor.

We have tests in parse_taprio_schedule() so that cycle_time will never
be 0, and actually cycle_time is not 0 in get_cycle_time_elapsed().

The problem is that the types of divisor are different; cycle_time is
s64, but the argument of div_s64_rem() is s32.

syzkaller fed this input and 0x100000000 is cast to s32 to be 0.

  @TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME={0xc, 0x8, 0x100000000}

We use s64 for cycle_time to cast it to ktime_t, so let's keep it and
set max for cycle_time.

While at it, we prevent overflow in setup_txtime() and add another
test in parse_taprio_schedule() to check if cycle_time overflows.

Also, we add a new tdc test case for this issue.

[0]:
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 1 PID: 103 Comm: kworker/1:3 Not tainted 6.5.0-rc1-00330-g60cc1f7d #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:div_s64_rem include/linux/math64.h:42 [inline]
RIP: 0010:get_cycle_time_elapsed net/sched/sch_taprio.c:223 [inline]
RIP: 0010:find_entry_to_transmit+0x252/0x7e0 net/sched/sch_taprio.c:344
Code: 3c 02 00 0f 85 5e 05 00 00 48 8b 4c 24 08 4d 8b bd 40 01 00 00 48 8b 7c 24 48 48 89 c8 4c 29 f8 48 63 f7 48 99 48 89 74 24 70 <48> f7 fe 48 29 d1 48 8d 04 0f 49 89 cc 48 89 44 24 20 49 8d 85 10
RSP: 0018:ffffc90000acf260 EFLAGS: 00010206
RAX: 177450e0347560cf RBX: 0000000000000000 RCX: 177450e0347560cf
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000100000000
RBP: 0000000000000056 R08: 0000000000000000 R09: ffffed10020a0934
R10: ffff8880105049a7 R11: ffff88806cf3a520 R12: ffff888010504800
R13: ffff88800c00d800 R14: ffff8880105049a0 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0edf84f0e8 CR3: 000000000d73c002 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
 <TASK>
 get_packet_txtime net/sched/sch_taprio.c:508 [inline]
 taprio_enqueue_one+0x900/0xff0 net/sched/sch_taprio.c:577
 taprio_enqueue+0x378/0xae0 net/sched/sch_taprio.c:658
 dev_qdisc_enqueue+0x46/0x170 net/core/dev.c:3732
 __dev_xmit_skb net/core/dev.c:3821 [inline]
 __dev_queue_xmit+0x1b2f/0x3000 net/core/dev.c:4169
 dev_queue_xmit include/linux/netdevice.h:3088 [inline]
 neigh_resolve_output net/core/neighbour.c:1552 [inline]
 neigh_resolve_output+0x4a7/0x780 net/core/neighbour.c:1532
 neigh_output include/net/neighbour.h:544 [inline]
 ip6_finish_output2+0x924/0x17d0 net/ipv6/ip6_output.c:135
 __ip6_finish_output+0x620/0xaa0 net/ipv6/ip6_output.c:196
 ip6_finish_output net/ipv6/ip6_output.c:207 [inline]
 NF_HOOK_COND include/linux/netfilter.h:292 [inline]
 ip6_output+0x206/0x410 net/ipv6/ip6_output.c:228
 dst_output include/net/dst.h:458 [inline]
 NF_HOOK.constprop.0+0xea/0x260 include/linux/netfilter.h:303
 ndisc_send_skb+0x872/0xe80 net/ipv6/ndisc.c:508
 ndisc_send_ns+0xb5/0x130 net/ipv6/ndisc.c:666
 addrconf_dad_work+0xc14/0x13f0 net/ipv6/addrconf.c:4175
 process_one_work+0x92c/0x13a0 kernel/workqueue.c:2597
 worker_thread+0x60f/0x1240 kernel/workqueue.c:2748
 kthread+0x2fe/0x3f0 kernel/kthread.c:389
 ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
 </TASK>
Modules linked in:

Fixes: 4cfd5779 ("taprio: Add support for txtime-assist mode")
Reported-by: default avatarsyzkaller <syzkaller@googlegroups.com>
Signed-off-by: default avatarKuniyuki Iwashima <kuniyu@amazon.com>
Co-developed-by: default avatarEric Dumazet <edumazet@google.com>
Co-developed-by: default avatarPedro Tammela <pctammela@mojatatu.com>
Acked-by: default avatarVinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e7397184
  5. 29 Jul, 2023 18 commits
  7. 28 Jul, 2023 3 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7