- 24 Mar, 2023 14 commits
-
-
Muralidhara M K authored
Call them from their respective setup_mci_misc_attrs() paths. No functional change is intended. [ Yazen: rebased/reworked patch and reworded commit message. ] Signed-off-by:
Muralidhara M K <muralidhara.mk@amd.com> Co-developed-by:
Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Signed-off-by:
Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by:
Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230127170419.1824692-20-yazen.ghannam@amd.com
-
Yazen Ghannam authored
...to match the "umc_" prefix convention. No functional change is intended. Signed-off-by:
-
Muralidhara M K authored
The init_one_instance() path is shared between legacy and modern systems. So add the new functions to a function pointer in pvt->ops. No functional change is intended. [ Yazen: Rebased/reworked patch and reworded commit message. ] Signed-off-by:
-
Muralidhara M K authored
Call them using a function pointer in pvt->ops. The "ECC enabled" check is done outside of the hardware information gathering done in hw_info_get(). So a high-level function pointer is needed to separate the legacy and modern paths. No functional change is intended. [Yazen: rebased/reworked patch and reworded commit message. ] Signed-off-by:
-
Muralidhara M K authored
Call them from their respective hw_info_get() paths. ECC symbol size is not needed on UMC systems, so determine_ecc_sym_sz() is left out of the UMC path. Do not save TOP_MEM* values on modern controllers because they're not needed there (read: they were used only for debugging, if anything). [ Yazen: rebased/reworked patch and reworded commit message. ] Signed-off-by:
-
Muralidhara M K authored
Call them from their respective hw_info_get() paths. Call them after all other hardware registers have been saved, since the memory type for a device will be determined based on the saved information. [ Yazen: rebased/reworked patch and reworded commit message. ] Signed-off-by:
-
Muralidhara M K authored
Call them from their respective hw_info_get() paths. Call the new functions after the setting the chip select base and mask counts, since those are need to read the correct number of chip select base and mask registers. And call the new functions before the remaining set up, because the base and mask register values will be needed later. [Yazen: Rebased/reworked patch and reworded commit message. ] Signed-off-by:
-
Muralidhara M K authored
Call them from their respective hw_info_get() function. Avoid the need for family/model-based function pointers. Add the calls before reading hardware registers from the memory controllers, since the number of chip select bases and masks needs to be known first. [ Yazen: rebased/reworked patch and reworded commit message. ] Signed-off-by:
-
Yazen Ghannam authored
The bulk of system-specific information is gathered at init time with hw_info_get(). This function calls a number of helper functions, and many of these helper functions are split between a modern UMC/DF path and a legacy DCT path. Split hw_info_get() into legacy and modern versions. This creates two separate code paths early on, and legacy and modern helper functions can be called directly in the appropriate code path. Also, simplify hw_info_put() and share it between legacy and modern systems. NULL pointer checks are done in pci_dev_put() and kfree(), so they can be called unconditionally. Signed-off-by:
-
Muralidhara M K authored
Future AMD systems will support heterogeneous "AMD Node" types, e.g. CPU and GPU types. Therefore, a global family type shared across all AMD nodes is no longer appropriate. Move struct low_ops routines and members of struct amd64_family_type to struct amd64_pvt. Currently, there are many code branches that split between "modern" and "legacy" systems. Another code branch will be needed in order to cover GPU cases. However, rather than introduce another branching case in multiple functions, the current branching code should be switched to a set of function pointers. This change makes the code more readable and simplifies adding support for new families/models. In order to reuse code, define two sets of function pointers. Use one for modern systems (Family 17h and later). This will not change between current CPU families. Use another set of function pointers for legacy systems (before Family 17h). Use the Family 16h versions as default for the legacy ops since these are the latest, and adjust the function pointers as needed for older families. [ Yazen: rebased/reworked patch and reworded commit message. ] [ bp: Fix rev8 or later check. ] Signed-off-by:
-
Yazen Ghannam authored
The ECC symbol size was needed on legacy system to lookup the ECC syndrome. This is not needed on modern systems because the ECC syndrome is explicitly provided in the MCA information. Remove the ECC symbol size discovery code for modern UMC-based systems. Signed-off-by:
-
Yazen Ghannam authored
The same function is used to calculate chip select size for all Zen-based family/models. Therefore, a family/model function pointer is not necessary. Drop the dbam_to_cs() function pointer for Family 17h and later systems. Also, move the Family 17h function to avoid a forward declaration. Rename it to indicate that the UMC Address Mask is used rather than the legacy DBAM value. Signed-off-by:
-
Yazen Ghannam authored
Split get_csrow_nr_pages() into a legacy and modern versions in preparation for further legacy/modern refactoring. Also, rename f17_get_cs_mode() to match the new convention. Signed-off-by:
-
Yazen Ghannam authored
Use the "dct" and "umc" prefixes for legacy and modern versions respectively. Also, move the "dct" version to avoid a forward declaration, and fixup some checkpatch warnings in the process. Signed-off-by:
-
- 20 Mar, 2023 4 commits
-
-
git://git.kernel.org/pub/scm/fs/fsverity/linuxLinus Torvalds authored
Pull fsverity fixes from Eric Biggers: "Fix two significant performance issues with fsverity" * tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux: fsverity: don't drop pagecache at end of FS_IOC_ENABLE_VERITY fsverity: Remove WQ_UNBOUND from fsverity read workqueue
-
git://git.kernel.org/pub/scm/fs/fscrypt/linuxLinus Torvalds authored
Pull fscrypt fix from Eric Biggers: "Fix a bug where when a filesystem was being unmounted, the fscrypt keyring was destroyed before inodes have been released by the Landlock LSM. This bug was found by syzbot" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux: fscrypt: check for NULL keyring in fscrypt_put_master_key_activeref() fscrypt: improve fscrypt_destroy_keyring() documentation fscrypt: destroy keyring after security_sb_delete()
-
Arnd Bergmann authored
The error handling for platform_get_irq() failing no longer works after a recent change, clang now points this out with a warning: drivers/gpu/host1x/dev.c:520:6: error: variable 'syncpt_irq' is uninitialized when used here [-Werror,-Wuninitialized] if (syncpt_irq < 0) ^~~~~~~~~~ Fix this by removing the variable and checking the correct error status. Fixes: 625d4ffb ("gpu: host1x: Rewrite syncpoint interrupt handling") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Jon Hunter <jonathanh@nvidia.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds authored
Pull NFS client fixes from Anna Schumaker: - Fix /proc/PID/io read_bytes accounting - Fix setting NLM file_lock start and end during decoding testargs - Fix timing for setting access cache timestamps * tag 'nfs-for-6.3-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFS: Correct timing for assigning access cache timestamp lockd: set file_lock start and end when decoding nlm4 testargs NFS: Fix /proc/PID/io read_bytes for buffered reads
-
- 19 Mar, 2023 18 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Fix setting affinity of hwlat threads in containers Using sched_set_affinity() has unwanted side effects when being called within a container. Use set_cpus_allowed_ptr() instead - Fix per cpu thread management of the hwlat tracer: - Do not start per_cpu threads if one is already running for the CPU - When starting per_cpu threads, do not clear the kthread variable as it may already be set to running per cpu threads - Fix return value for test_gen_kprobe_cmd() On error the return value was overwritten by being set to the result of the call from kprobe_event_delete(), which would likely succeed, and thus have the function return success - Fix splice() reads from the trace file that was broken by commit 36e2c742 ("fs: don't allow splice read/write without explicit ops") - Remove obsolete and confusing comment in ring_buffer.c The original design of the ring buffer used struct page flags for tricks to optimize, which was shortly removed due to them being tricks. But a comment for those tricks remained - Set local functions and variables to static * tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr ring-buffer: remove obsolete comment for free_buffer_page() tracing: Make splice_read available again ftrace: Set direct_ops storage-class-specifier to static trace/hwlat: Do not start per-cpu thread if it is already running trace/hwlat: Do not wipe the contents of per-cpu thread data tracing/osnoise: set several trace_osnoise.c variables storage-class-specifier to static tracing: Fix wrong return in kprobe_event_gen_test.c -
Costa Shulyupin authored
There is a problem with the behavior of hwlat in a container, resulting in incorrect output. A warning message is generated: "cpumask changed while in round-robin mode, switching to mode none", and the tracing_cpumask is ignored. This issue arises because the kernel thread, hwlatd, is not a part of the container, and the function sched_setaffinity is unable to locate it using its PID. Additionally, the task_struct of hwlatd is already known. Ultimately, the function set_cpus_allowed_ptr achieves the same outcome as sched_setaffinity, but employs task_struct instead of PID. Test case: # cd /sys/kernel/tracing # echo 0 > tracing_on # echo round-robin > hwlat_detector/mode # echo hwlat > current_tracer # unshare --fork --pid bash -c 'echo 1 > tracing_on' # dmesg -c Actual behavior: [573502.809060] hwlat_detector: cpumask changed while in round-robin mode, switching to mode none Link: https://lore.kernel.org/linux-trace-kernel/20230316144535.1004952-1-costa.shul@redhat.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Fixes: 0330f7aa ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs") Signed-off-by:
Costa Shulyupin <costa.shul@redhat.com> Acked-by:
Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
Vlastimil Babka authored
The comment refers to mm/slob.c which is being removed. It comes from commit ed56829c ("ring_buffer: reset buffer page when freeing") and according to Steven the borrowed code was a page mapcount and mapping reset, which was later removed by commit e4c2ce82 ("ring_buffer: allocate buffer page pointer"). Thus the comment is not accurate anyway, remove it. Link: https://lore.kernel.org/linux-trace-kernel/20230315142446.27040-1-vbabka@suse.cz Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Reported-by:
Mike Rapoport <mike.rapoport@gmail.com> Suggested-by:
Vlastimil Babka <vbabka@suse.cz> Reviewed-by:
Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by:
-
Sung-hun Kim authored
Since the commit 36e2c742 ("fs: don't allow splice read/write without explicit ops") is applied to the kernel, splice() and sendfile() calls on the trace file (/sys/kernel/debug/tracing /trace) return EINVAL. This patch restores these system calls by initializing splice_read in file_operations of the trace file. This patch only enables such functionalities for the read case. Link: https://lore.kernel.org/linux-trace-kernel/20230314013707.28814-1-sfoon.kim@samsung.com Cc: stable@vger.kernel.org Fixes: 36e2c742 ("fs: don't allow splice read/write without explicit ops") Signed-off-by:
Sung-hun Kim <sfoon.kim@samsung.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.3-rc3 to resolve some reported issues. They include: - 8250 driver Kconfig issue pointed out by you that showed up in -rc1 - qcom-geni serial driver fixes - various 8250 driver fixes for reported problems - fsl_lpuart driver fixes - serdev fix for regression in -rc1 - vt.c bugfix All have been in linux-next for over a week with no reported problems" * tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: vt: protect KD_FONT_OP_GET_TALL from unbound access serial: qcom-geni: drop bogus uart_write_wakeup() serial: qcom-geni: fix mapping of empty DMA buffer serial: qcom-geni: fix DMA mapping leak on shutdown serial: qcom-geni: fix console shutdown hang serdev: Set fwnode for serdev devices tty: serial: fsl_lpuart: fix race on RX DMA shutdown serial: 8250_pci1xxxx: Disable SERIAL_8250_PCI1XXXX config by default serial: 8250_fsl: fix handle_irq locking serial: 8250_em: Fix UART port type serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are a few small char/misc/other driver subsystem patches to resolve reported problems for 6.3-rc3. Included in here are: - Interconnect driver fixes for reported problems - Memory driver fixes for reported problems - nvmem core fix - firmware driver fix for reported problem All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (23 commits) memory: tegra30-emc: fix interconnect registration race memory: tegra20-emc: fix interconnect registration race memory: tegra124-emc: fix interconnect registration race memory: tegra: fix interconnect registration race interconnect: exynos: drop redundant link destroy interconnect: exynos: fix registration race interconnect: exynos: fix node leak in probe PM QoS error path interconnect: qcom: msm8974: fix registration race interconnect: qcom: rpmh: fix registration race interconnect: qcom: rpmh: fix probe child-node error handling interconnect: qcom: rpm: fix registration race nvmem: core: return -ENOENT if nvmem cell is not found firmware: xilinx: don't make a sleepable memory allocation from an atomic context interconnect: qcom: rpm: fix probe child-node error handling interconnect: qcom: osm-l3: fix registration race interconnect: imx: fix registration race interconnect: fix provider registration API interconnect: fix icc_provider_del() error handling interconnect: fix mem leak when freeing nodes interconnect: qcom: qcm2290: Fix MASTER_SNOC_BIMC_NRT ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RAS fix from Borislav Petkov: - Flush out logged errors immediately after MCA banks configuration changes over sysfs have been done instead of waiting until something else triggers the workqueue later - another error or the polling interval cycle is reached * tag 'ras_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Make sure logged MCEs are processed after sysfs update
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Check whether sibling events have been deactivated before adding them to groups - Update the proper event time tracking variable depending on the event type - Fix a memory overwrite issue due to using the wrong function argument when outputting perf events * tag 'perf_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix check before add_event_to_groups() in perf_group_detach() perf: fix perf_event_context->time perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: "There's a little bit more 'movement' in there for my taste but it needs to happen and should make the code better after it. - Check cmdline_find_option()'s return value before further processing - Clear temporary storage in the resctrl code to prevent access to an unexistent MSR - Add a simple throttling mechanism to protect the hypervisor from potentially malicious SEV guests issuing requests in rapid succession. In order to not jeopardize the sanity of everyone involved in maintaining this code, the request issuing side has received a cleanup, split in more or less trivial, small and digestible pieces. Otherwise, the code was threatening to become an unmaintainable mess. Therefore, that cleanup is marked indirectly also for stable so that there's no differences between the upstream code and the stable variant when it comes down to backporting more there" * tag 'x86_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix use of uninitialized buffer in sme_enable() x86/resctrl: Clear staged_config[] before and after it is used virt/coco/sev-guest: Add throttling awareness virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case virt/coco/sev-guest: Do some code style cleanups virt/coco/sev-guest: Carve out the request issuing logic into a helper virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request() virt/coco/sev-guest: Simplify extended guest request handling virt/coco/sev-guest: Check SEV_SNP attribute at probe time -
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fix from Ted Ts'o: "Fix a double unlock bug on an error path in ext4, found by smatch and syzkaller" * tag 'ext4_for_linus_urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix possible double unlock when moving a directory
-
Tom Rix authored
smatch reports this warning kernel/trace/ftrace.c:2594:19: warning: symbol 'direct_ops' was not declared. Should it be static? The variable direct_ops is only used in ftrace.c, so it should be static Link: https://lore.kernel.org/linux-trace-kernel/20230311135113.711824-1-trix@redhat.comSigned-off-by:
Tom Rix <trix@redhat.com> Acked-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by:
-
Tero Kristo authored
The hwlatd tracer will end up starting multiple per-cpu threads with the following script: #!/bin/sh cd /sys/kernel/debug/tracing echo 0 > tracing_on echo hwlat > current_tracer echo per-cpu > hwlat_detector/mode echo 100000 > hwlat_detector/width echo 200000 > hwlat_detector/window echo 1 > tracing_on To fix the issue, check if the hwlatd thread for the cpu is already running, before starting a new one. Along with the previous patch, this avoids running multiple instances of the same CPU thread on the system. Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/ Link: https://lkml.kernel.org/r/20230310100451.3948583-3-tero.kristo@linux.intel.com Cc: stable@vger.kernel.org Fixes: f46b1652 ("trace/hwlat: Implement the per-cpu mode") Signed-off-by:Tero Kristo <tero.kristo@linux.intel.com> Acked-by:
-
Tero Kristo authored
Do not wipe the contents of the per-cpu kthread data when starting the tracer, as this will completely forget about already running instances and can later start new additional per-cpu threads. Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/ Link: https://lkml.kernel.org/r/20230310100451.3948583-2-tero.kristo@linux.intel.com Cc: stable@vger.kernel.org Fixes: f46b1652 ("trace/hwlat: Implement the per-cpu mode") Signed-off-by:
-
Tom Rix authored
smatch reports several similar warnings kernel/trace/trace_osnoise.c:220:1: warning: symbol '__pcpu_scope_per_cpu_osnoise_var' was not declared. Should it be static? kernel/trace/trace_osnoise.c:243:1: warning: symbol '__pcpu_scope_per_cpu_timerlat_var' was not declared. Should it be static? kernel/trace/trace_osnoise.c:335:14: warning: symbol 'interface_lock' was not declared. Should it be static? kernel/trace/trace_osnoise.c:2242:5: warning: symbol 'timerlat_min_period' was not declared. Should it be static? kernel/trace/trace_osnoise.c:2243:5: warning: symbol 'timerlat_max_period' was not declared. Should it be static? These variables are only used in trace_osnoise.c, so it should be static Link: https://lore.kernel.org/linux-trace-kernel/20230309150414.4036764-1-trix@redhat.comSigned-off-by:
-
Anton Gusev authored
Overwriting the error code with the deletion result may cause the function to return 0 despite encountering an error. Commit b111545d ("tracing: Remove the useless value assignment in test_create_synth_event()") solves a similar issue by returning the original error code, so this patch does the same. Found by Linux Verification Center (linuxtesting.org) with SVACE. Link: https://lore.kernel.org/linux-trace-kernel/20230131075818.5322-1-aagusev@ispras.ruSigned-off-by:
Anton Gusev <aagusev@ispras.ru> Reviewed-by:
-
Eric Biggers authored
It is a bug for fscrypt_put_master_key_activeref() to see a NULL keyring. But it used to be possible due to the bug, now fixed, where fscrypt_destroy_keyring() was called before security_sb_delete(). To be consistent with how fscrypt_destroy_keyring() uses WARN_ON for the same issue, WARN and leak the fscrypt_master_key if the keyring is NULL instead of dereferencing the NULL pointer. This is a robustness improvement, not a fix. Link: https://lore.kernel.org/r/20230313221231.272498-4-ebiggers@kernel.orgSigned-off-by:
Eric Biggers <ebiggers@google.com>
-
Eric Biggers authored
Document that fscrypt_destroy_keyring() must be called after all potentially-encrypted inodes have been evicted. Link: https://lore.kernel.org/r/20230313221231.272498-3-ebiggers@kernel.orgSigned-off-by:
-
- 18 Mar, 2023 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdevLinus Torvalds authored
Pull fbdev fixes from Helge Deller: "The majority of lines changed is due to a code style cleanup in the pnmtologo helper program. Arnd removed the omap1 osk driver and the SIS fb driver is now orphaned. Other than that it's the usual bunch of small fixes and cleanups, e.g. prevent possible divide-by-zero in various fb drivers if the pixclock is zero and various conversions to devm_platform*() and of_property*() functions: - Drop omap1 osk driver - Various potential divide by zero pixclock fixes - Add pixelclock and fb_check_var() to stifb - Code style cleanups and indenting fixes" * tag 'fbdev-for-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: Use of_property_present() for testing DT property presence fbdev: au1200fb: Fix potential divide by zero fbdev: lxfb: Fix potential divide by zero fbdev: intelfb: Fix potential divide by zero fbdev: nvidia: Fix potential divide by zero fbdev: stifb: Provide valid pixelclock and add fb_check_var() checks fbdev: omapfb: remove omap1 osk driver fbdev: xilinxfb: Use devm_platform_get_and_ioremap_resource() fbdev: wm8505fb: Use devm_platform_ioremap_resource() fbdev: pxa3xx-gcu: Use devm_platform_get_and_ioremap_resource() fbdev: Use of_property_read_bool() for boolean properties fbdev: clps711x-fb: Use devm_platform_get_and_ioremap_resource() fbdev: tgafb: Fix potential divide by zero MAINTAINERS: orphan SIS FRAMEBUFFER DRIVER fbdev: omapfb: cleanup inconsistent indentation drivers: video: logo: add SPDX comment, remove GPL notice in pnmtologo.c drivers: video: logo: fix code style issues in pnmtologo.c
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Exclude kallsyms_seqs_of_names from kallsyms to fix build error - Fix 'make kernelrelease' for external module builds - Get the Debian source package compilable again - Fix the wrong uname when Debian packages are built with the KDEB_PKGVERSION option - Fix superfluous CROSS_COMPILE when building Debian packages - Fix RPM package build error when KCONFIG_CONFIG is set - Use 'git archive' for creating source tarballs - Remove the scripts/list-gitignored tool * tag 'kbuild-fixes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: use git-archive for source package creation kbuild: rpm-pkg: move source components to rpmbuild/SOURCES kbuild: deb-pkg: use dh_listpackages to know enabled packages kbuild: deb-pkg: split image and debug objects staging out into functions kbuild: deb-pkg: set CROSS_COMPILE only when undefined kbuild: deb-pkg: do not take KERNELRELEASE from the source version kbuild: deb-pkg: make debian source package working again Makefile: Make kernelrelease target work with M= kconfig: Update config changed flag before calling callback kallsyms: add kallsyms_seqs_of_names to list of special symbols
-
Linus Torvalds authored
Merge tag 'hwmon-for-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - ltc2992, adm1266: Set missing can_sleep flag - tmp512/tmp513: Drop of_match_ptr for ID table to fix build with !CONFIG_OF - ucd90320: Fix back-to-back access problem - ina3221: Fix bad error return from probe function - xgene: Fix use-after-free bug in remove function - adt7475: Fix hysteresis register bit masks, and fix association of 'smoothing' attributes * tag 'hwmon-for-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ltc2992) Set `can_sleep` flag for GPIO chip hwmon: (adm1266) Set `can_sleep` flag for GPIO chip hwmon: tmp512: drop of_match_ptr for ID table hwmon: (ucd90320) Add minimum delay between bus accesses hwmon: (ina3221) return prober error code hwmon: (xgene) Fix use after free bug in xgene_hwmon_remove due to race condition hwmon: (adt7475) Fix masking of hysteresis registers hwmon: (adt7475) Display smoothing attributes in correct order
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ata fixes from Damien Le Moal: - Two fixes from Ondrej for the pata_parport driver to address an issue with error handling during drive connection and to fix memory leaks in case of errors during initialization and when disconnecting a device. * tag 'ata-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_parport: fix memory leaks ata: pata_parport: fix parport release without claim
-
