- 19 Jun, 2024 3 commits
-
-
Jacopo Mondi authored
Cleanup the V4L2 subdevice in the driver's remove function to ensure its async connection are freed, and guarantee in future that the subdev active state is cleaned up. Fixes: 769afd21 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver") Signed-off-by:
Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by:
-
Jacopo Mondi authored
Disable pm_runtime in the probe() function error path. Fixes: 769afd21 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver") Signed-off-by:
-
Jacopo Mondi authored
The YUYV8_1X16 and UYVY8_1X16 formats are treated as 'ITU-R BT.601/BT.1358 16-bit YCbCr-422 input' (YUV16 - 0x5) in the R-Car VIN driver and are thus disallowed when capturing frames from the R-Car CSI-2 interface according to the hardware manual. As the 1X16 format variants are meant to be used with serial busses they have to be treated as 'YCbCr-422 8-bit data input' (0x1) when capturing from CSI-2, which is a valid setting for CSI-2. Commit 78b3f9d7 ("media: rcar-vin: Add check that input interface and format are valid") disallowed capturing YUV16 when using the CSI-2 interface. Fix this by using YUV8_BT601 for YCbCr422 when CSI-2 is in use. Fixes: 78b3f9d7 ("media: rcar-vin: Add check that input interface and format are valid") Signed-off-by:
-
- 15 Jun, 2024 24 commits
-
-
Jeff Johnson authored
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/v4l2-core/v4l2-async.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/v4l2-core/v4l2-fwnode.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Abdulrasaq Lawani authored
Replace instance of of_node_put with __free(device_node) to protect against any memory leaks due to future changes in control flow. Signed-off-by:
Abdulrasaq Lawani <abdulrasaqolawani@gmail.com> Acked-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
-
Benjamin Mugnier authored
Rename 'st-vgxy61' to 'vgxy61', dropping the vendor prefix to follow the same naming scheme as the vast majority of device drivers. The device tree binding does not fall into binding rename exceptions and therefore must not be changed. Keep its legacy name. Signed-off-by:
Benjamin Mugnier <benjamin.mugnier@foss.st.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Conor Dooley authored
It was reported to me that the imx219 didn't work on one of our development kits partly because the access sequence is incorrect. The datasheet I could find [1] for this camera has the access sequence: Seq. No. Address (Hex) data 1 30EB 05 2 30EB 0C 3 300A FF 4 300B FF 5 30EB 05 6 30EB 09 but the driver swaps the first two elements. Laurent pointed out on IRC that the original code used the correct sequence for 1920x1080 but the current sequence for 3280x2464 and 1640x1232. During refactoring of the init sequence the current order was used for all formats. Switch to using the documented sequence. Link: https://www.opensourceinstruments.com/Electronics/Data/IMX219PQ.pdf [1] Fixes: 85084559 ("media: i2c: imx219: Split common registers from mode tables") Fixes: 1283b3b8 ("media: i2c: Add driver for Sony IMX219 sensor") Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit Signed-off-by:
-
Hans de Goede authored
The ov2680 driver has 9 controls now and the call to v4l2_ctrl_new_fwnode_properties() adds 2 more. Tell v4l2_ctrl_handler_init() to pre-allocate space for 11 controls to match this. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
The out of tree IPU6 driver comes with its own copy of the ipu-bridge code. It also comes bundled with standard v4l2 sensor drivers. Many of these have been mainlined and the rest is being mainlined but not all are upstream yet. The latest version of the out of tree code now will use the mainline kernel ipu-bridge version when build against new enough kernels. This however breaks support for (bundled) sensor drivers which do not (yet) have an entry in the mainline ipu-bridge code. Add the missing entries to the mainline ipu-bridge code to make the transition to having everything in mainline easier. The alternative HID for the OV13B10 and the OV08x40 entries both are for sensors already supported in mainline which were missing. The downside of adding these HIDs is that this will cause the IPU3 / IPU6 drivers to delay registering there /dev/video# nodes until a sensor driver has bound, which for the non mainline drivers may never happen. This is not really an issue because almost all IPU designs only have front (user) facing sensors and all the added HIDs are for the main RGB (not IR) sensor. So if the sensor driver is missing then the user can already not use the camera and adding these HIDs does not really change that. Signed-off-by:
-
Hans de Goede authored
Sort the sensors in ipu_supported_sensors[] by ACPI HID rather then having them in some random order. While at it also use the correct (same as datasheet) capitalization for the sensor names in the comments. Instead of sometimes writing OV#### and sometimes ov####. Signed-off-by:
-
Tommaso Merciai authored
Into alvium cameras REG_BCRM_GAIN_RW control the analog gain. Let's use the right V4L2_CID_ANALOGUE_GAIN ctrl. Fixes: 0a7af872 ("media: i2c: Add support for alvium camera") Cc: stable@vger.kernel.org Signed-off-by:
Tommaso Merciai <tomm.merciai@gmail.com> Signed-off-by:
-
Tommaso Merciai authored
Implement the enum_frame_size pad operation. The sensor supports a continuous size range of resolutions. Signed-off-by:
-
Tommaso Merciai authored
Alvium camera by default is in free running mode. Datasheet say that acquisition frame rate reg can only be used if frame start trigger mode is set to off. Enable r/w acquisition frame rate and turn off trigger mode. Signed-off-by:
-
Tommaso Merciai authored
Acquisition frame rate enable reg have a very long name let's reduce this with an abbreviation. Signed-off-by:
-
Tommaso Merciai authored
Instead of reading device_fw reg as multiple regs let's read the entire 64bit reg using one i2c read and use bit masks and bit shifts to get fw info. Signed-off-by:
-
Wentong Wu authored
The privacy status is maintained by privacy_ctrl, on which all of the privacy status changes will go through, so there is no point in maintaining one more element any more. Reported-by:
Hao Yao <hao.yao@intel.com> Signed-off-by:
Wentong Wu <wentong.wu@intel.com> Tested-by:
Jason Chen <jason.z.chen@intel.com> Signed-off-by:
-
Wentong Wu authored
Prior to the ongoing command privacy is on, it would return -1 to indicate the current privacy status, and the ongoing command would be well executed by firmware as well, so this is not error. This patch changes its behavior to notify privacy on directly by V4L2 privacy control instead of reporting error. Fixes: 29006e19 ("media: pci: intel: ivsc: Add CSI submodule") Cc: stable@vger.kernel.org # for 6.6 and later Reported-by:
-
Wentong Wu authored
There're possibilities that privacy status change notification happens in the middle of the ongoing mei command which already takes the command lock, but v4l2_ctrl_s_ctrl() would also need the same lock prior to this patch, so this may results in circular locking problem. This patch adds one dedicated lock for v4l2 control handler to avoid described issue. Fixes: 29006e19 ("media: pci: intel: ivsc: Add CSI submodule") Cc: stable@vger.kernel.org # for 6.6 and later Reported-by:
-
Ricardo Ribalda authored
Replace the older style one-element array with a flexible array member. There does not seem to be any allocation for these structs in the code, so no more code changes are required. The following cocci warnings are fixed: drivers/media/dvb-frontends/mxl5xx_defs.h:182:4-8: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/media/dvb-frontends/mxl5xx_defs.h:171:4-8: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) Signed-off-by:
Ricardo Ribalda <ribalda@chromium.org> Signed-off-by:
-
Ricardo Ribalda authored
clang 19 complains about the missing parameter name. Let's add it. drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-debugfs.h:19:62: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions] Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202406050908.1kL1C69p-lkp@intel.com/ Fixes: e22b4973 ("media: c8sectpfe: Do not depend on DEBUG_FS") Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
Jeff Johnson authored
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/tuners/tda9887.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by:
-
Jeff Johnson authored
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/radio/si470x/radio-si470x-common.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by:
-
Jeff Johnson authored
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/ttpci/budget-core.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/bt8xx/bt878.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/ivtv/ivtvfb.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by:
-
Jeff Johnson authored
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/go7007/go7007.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/go7007/go7007-usb.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by:
-
Jeff Johnson authored
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-empress.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-go7007.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-alsa.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-dvb.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by:
-
Jeff Johnson authored
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/marvell/mcam-core.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/marvell/mmp_camera.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by:
-
Aleksandr Burakov authored
Return value of function 'i2c_transfer' is not checked that may cause undefined behaviour. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 2cf36ac4 ("[PATCH] v4l: 656: added support for the following cards") Signed-off-by:
Aleksandr Burakov <a.burakov@rosalinux.ru> Signed-off-by:
-
- 14 Jun, 2024 1 commit
-
-
Hans Verkuil authored
The CENTERED_RECTANGLE define fails to compile on clang and old gcc versions. Just drop it and fill in the crop rectangles explicitly. Signed-off-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Acked-by:
-
- 13 Jun, 2024 2 commits
-
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
Tony Luck <tony.luck@intel.com> Reviewed-by:
Andy Shevchenko <andy@kernel.org> Acked-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Rafał Miłecki authored
This helps validating DTS files. Introduced changes: 1. Reworded title 2. Made "bus" clock required on MT7623 as well 3. Added required #include-s and adjusted "reg" & clocks in example Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by:
Sean Young <sean@mess.org> Signed-off-by:
-
- 10 Jun, 2024 8 commits
-
-
Ming Qian authored
Report the average QP value of the current encoded frame via the V4L2_CID_MPEG_VIDEO_AVERAGE_QP control, the value applies to the last dequeued capture buffer. Signed-off-by:
Ming Qian <ming.qian@nxp.com> Signed-off-by:
Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by:
-
Ming Qian authored
There is no need to add a lock in s_ctrl callback, it has been synchronized by the ctrl_handler's lock, otherwise it may led to a deadlock if the driver calls v4l2_ctrl_s_ctrl(). Signed-off-by:
-
Ming Qian authored
Add a control V4L2_CID_MPEG_VIDEO_AVERAGE_QP to report the average QP value of the current encoded frame. The value applies to the last dequeued capture buffer. Signed-off-by:
-
Douglas Anderson authored
As talked about in commit 14d3ae2e ("ARM: 8507/1: dma-mapping: Use DMA_ATTR_ALLOC_SINGLE_PAGES hint to optimize alloc"), it doesn't really make sense to try to allocate contiguous chunks of memory for video encoding/decoding. Let's switch the Mediatek vcodec driver to pass DMA_ATTR_ALLOC_SINGLE_PAGES and take some of the stress off the memory subsystem. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
Fei Shao <fshao@chromium.org> Reviewed-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by:
-
Yunfei Dong authored
Both 'bs_dma' and 'dma_addr' are integers. No need to convert the type from dma_addr_t to uint64_t again. Fixes: d353c3c3 ("media: mediatek: vcodec: support 36 bits physical address") Signed-off-by:
Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by:
-
Irui Wang authored
Handle an invalid decoder vsi in vpu_dec_init to ensure the decoder vsi is valid for future use. Fixes: 590577a4 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Decoder Driver") Signed-off-by:
Irui Wang <irui.wang@mediatek.com> Reviewed-by:
-
Yunfei Dong authored
The supported decoder commands are different for stateless and stateful architectures. Add stateless decoder commands to fix the v4l2-compliance test error below. Codec ioctls: VIDIOC_ENCODER_CMD returned -1 (Inappropriate ioctl for device) VIDIOC_TRY_ENCODER_CMD returned -1 (Inappropriate ioctl for device) test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) VIDIOC_G_ENC_INDEX returned -1 (Inappropriate ioctl for device) test VIDIOC_G_ENC_INDEX: OK (Not Supported) VIDIOC_DECODER_CMD returned -1 (Invalid argument) VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument) VIDIOC_TRY_DECODER_CMD returned -1 (Invalid argument) fail: v4l2-test-codecs.cpp(126): ret test VIDIOC_(TRY_)DECODER_CMD: FAIL Signed-off-by: -
Hans Verkuil authored
Linux 6.10-rc3 This is needed for the ipu6 and mei fixes. Signed-off-by:
-
- 09 Jun, 2024 2 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Arnaldo Carvalho de Melo: - Update copies of kernel headers, which resulted in support for the new 'mseal' syscall, SUBVOL statx return mask bit, RISC-V and PPC prctls, fcntl's DUPFD_QUERY, POSTED_MSI_NOTIFICATION IRQ vector, 'map_shadow_stack' syscall for x86-32. - Revert perf.data record memory allocation optimization that ended up causing a regression, work is being done to re-introduce it in the next merge window. - Fix handling of minimal vmlinux.h file used with BPF's CO-RE when interrupting the build. * tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: perf bpf: Fix handling of minimal vmlinux.h file when interrupting the build Revert "perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event" tools headers arm64: Sync arm64's cputype.h with the kernel sources tools headers uapi: Sync linux/stat.h with the kernel sources to pick STATX_SUBVOL tools headers UAPI: Update i915_drm.h with the kernel sources tools headers UAPI: Sync kvm headers with the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers: Update the syscall tables and unistd.h, mostly to support the new 'mseal' syscall perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources to pick POSTED_MSI_NOTIFICATION perf beauty: Update copy of linux/socket.h with the kernel sources tools headers UAPI: Sync fcntl.h with the kernel sources to pick F_DUPFD_QUERY tools headers UAPI: Sync linux/prctl.h with the kernel sources tools include UAPI: Sync linux/stat.h with the kernel sources
-
