- 19 May, 2010 9 commits
-
-
Arnaldo Carvalho de Melo authored
In __dsos__read_build_ids if the dso already had its build-id read, don't try again. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by:Arnaldo Carvalho de Melo <acme@redhat.com>
-
Cyrill Gorcunov authored
Should be there for the sake of RAW events. Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> CC: Lin Ming <ming.m.lin@intel.com> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> CC: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100518212439.354345151@openvz.org> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Cyrill Gorcunov authored
This snippet somehow escaped the commit: | commit 137351e0 | Author: Cyrill Gorcunov <gorcunov@openvz.org> | Date: Sat May 8 15:25:52 2010 +0400 | | x86, perf: P4 PMU -- protect sensible procedures from preemption so bring it eventually back. It helps to catch preemption issue (if there will be, rule of thumb -- don't use raw_ if you can). Signed-off-by:
-
Cyrill Gorcunov authored
To prevent from clashes in future code modifications do a real check for ESCR address being in hash. At moment the callers are known to pass sane values but better to be on a safe side. And comment fix. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
All the functions that call this can handle the equivalent, non panic'ing wrapped routines. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Arnaldo Carvalho de Melo authored
Functions that were calling xzalloc also returned -1 when, for other reasons, it could fail, and the calleds are coping with failures, so stop using die() and xzalloc(). Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Arnaldo Carvalho de Melo authored
That could leave filedescriptors open and leak memory. Also stop using xmalloc, use malloc and handle results just like other error cases in the same routine that used it. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Arnaldo Carvalho de Melo authored
Without the bloated cplus_demangle from binutils, i.e building with: $ make NO_DEMANGLE=1 O=~acme/git/build/perf -j3 -C tools/perf/ install Before: text data bss dec hex filename 471851 29280 4025056 4526187 45106b /home/acme/bin/perf After: [acme@doppio linux-2.6-tip]$ size ~/bin/perf text data bss dec hex filename 446886 29232 4008576 4484694 446e56 /home/acme/bin/perf So its a 5.3% size reduction in code, but the interesting part is in the git diff --stat output: 19 files changed, 20 insertions(+), 1909 deletions(-) If we ever need some of the things we got from git but weren't using, we just have to go to the git repo and get fresh, uptodate source code bits. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Stephane Eranian authored
It is hard to read very large numbers so provide an option to perf stat to separate thousands using a separator. The patch leverages the locale support of stdio. You need to set your LC_NUMERIC appropriately, for instance LC_NUMERIC=en_US.UTF8. You need to pass -B to activate this feature. This way existing scripts parsing the output do not need to be changed. Here is an example. $ perf stat noploop 2 noploop for 2 seconds Performance counter stats for 'noploop 2': 1998.347031 task-clock-msecs # 0.998 CPUs 61 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 118 page-faults # 0.000 M/sec 4,138,410,900 cycles # 2070.917 M/sec (scaled from 70.01%) 2,062,650,268 instructions # 0.498 IPC (scaled from 70.01%) 2,057,653,466 branches # 1029.678 M/sec (scaled from 70.01%) 40,267 branch-misses # 0.002 % (scaled from 30.04%) 2,055,961,348 cache-references # 1028.831 M/sec (scaled from 30.03%) 53,725 cache-misses # 0.027 M/sec (scaled from 30.02%) 2.001393933 seconds time elapsed $ perf stat -B noploop 2 noploop for 2 seconds Performance counter stats for 'noploop 2': 1998.297883 task-clock-msecs # 0.998 CPUs 59 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 119 page-faults # 0.000 M/sec 4,131,380,160 cycles # 2067.450 M/sec (scaled from 70.01%) 2,059,096,507 instructions # 0.498 IPC (scaled from 70.01%) 2,054,681,303 branches # 1028.216 M/sec (scaled from 70.01%) 25,650 branch-misses # 0.001 % (scaled from 30.05%) 2,056,283,014 cache-references # 1029.017 M/sec (scaled from 30.03%) 47,097 cache-misses # 0.024 M/sec (scaled from 30.02%) 2.001391016 seconds time elapsed Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4bf28fe8.914ed80a.01ca.fffff5f5@mx.google.com> Signed-off-by:Stephane Eranian <eranian@google.com> Signed-off-by:
-
- 18 May, 2010 12 commits
-
-
Lin Ming authored
Convert to the transactional PMU API and remove the duplication of group_sched_in(). [cross build only] Signed-off-by:
Lin Ming <ming.m.lin@intel.com> Acked-by:
David Miller <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1272002193.5707.65.camel@minggr.sh.intel.com> Signed-off-by:
-
Peter Zijlstra authored
Since the x86 XCHG ins implies LOCK, avoid the use by using a sequence count instead. Signed-off-by:
-
Peter Zijlstra authored
Since there is now only a single writer, we can use local_t instead and avoid all these pesky LOCK insn. Signed-off-by:
-
Peter Zijlstra authored
Since we can now assume there is only a single writer to each buffer, we can remove per-cpu lock thingy and use a simply nest-count to the same effect. This removes the need to disable IRQs. Signed-off-by:
-
Peter Zijlstra authored
Since we now have working per-task-per-cpu events for a while, disallow mmap() on per-task inherited events. Those things were a performance problem anyway, and doing away with it allows us to optimize the buffer somewhat by assuming there is only a single writer. Signed-off-by:
-
Peter Zijlstra authored
Ensure cpu bound buffers live on the right NUMA node. Suggested-by:
-
Stephane Eranian authored
In case the sampling buffer has no "payload" pages, nr_pages is 0. The problem is that the error path in perf_output_begin() skips to a label which assumes perf_output_lock() has been issued which is not the case. That triggers a WARN_ON() in perf_output_unlock(). This patch fixes the problem by skipping perf_output_unlock() in case data->nr_pages is 0. Signed-off-by:
-
Peter Zijlstra authored
When we've got but a single event per tracepoint there is no reason to try and multiplex it so don't. Signed-off-by:
-
Cyrill Gorcunov authored
Tested-by:
-
Cyrill Gorcunov authored
It might happen that an event can overflow without the proper overflow flag set. Check the sign bit in the raw counter value to solve this problem. Tested-by:
-
Arnaldo Carvalho de Melo authored
slang versions <= 2.0.6 have a "#if HAVE_LONG_LONG" that breaks the build if it isn't defined. Use the equivalent one that glibc has on features.h. Reported-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by:
-
Masami Hiramatsu authored
Check elfutils version, and if it is old don't compile CFI analysis code. This allows to compile perf with old elfutils. Signed-off-by:
Masami Hiramatsu <mhiramat@redhat.com> Tested-by:
Robert Richter <robert.richter@amd.com> Cc: Ingo Molnar <mingo@elte.hu> LKML-Reference: <20100510171207.26029.97604.stgit@localhost6.localdomain6> Signed-off-by:
-
- 17 May, 2010 11 commits
-
-
Arnaldo Carvalho de Melo authored
make NO_NEWT=1 Will avoid building the newt (tui) support. Suggested-by:
-
Arnaldo Carvalho de Melo authored
That happened for an old perf.data file that had no fake MMAP events for the kernel modules, but even then it should warn once for each module, not one time for every symbol in every module not found. Reported-by:
-
Arnaldo Carvalho de Melo authored
At least on rawhide using -lnewt is not enough if we use SLang routines directly, so add an explicit -lslang since we use SLang routines. Reported-by:
-
Arnaldo Carvalho de Melo authored
OPT_SET_INT was renamed to OPT_SET_UINT since the only use in these tools is to set something that has an enum type, that is builtin compatible with unsigned int. Several string constifications were done to make OPT_STRING require a const char * type. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Arnaldo Carvalho de Melo authored
Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Arnaldo Carvalho de Melo authored
To avoid problems like the one fixed by Stephane Eranian in 3de29cab, now we'll got this instead: bench/sched-messaging.c:259: error: negative width in bit-field ‘<anonymous>’ bench/sched-messaging.c:261: error: negative width in bit-field ‘<anonymous>’ Which is rather cryptic, but is how BUILD_BUG_ON_ZERO works, so kernel hackers should be already used to this. With it in place found some problems, fixed by changing the affected variables to sensible types or changed some OPT_INTEGER to OPT_UINTEGER. Next csets will go thru converting each of the remaining OPT_ so that review can be made easier by grouping changes per type per patch. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
For unsigned int options to be parsed, next patches will make use of it. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Arnaldo Carvalho de Melo authored
Older versions of the slang library didn't used the 'const' specifier, causing problems with modern compilers of this kind: util/newt.c:252: error: passing argument 1 of ‘SLsmg_printf’ discards qualifiers from pointer target type Fix it by using some wrappers that when needed const the affected parameters back to plain (char *). Reported-by:
-
Stephane Eranian authored
The -c option defines the user requested sampling period. It was implemented using an unsigned int variable but the type of the option was OPT_LONG. Thus, the option parser was overwriting memory belonging to other variables, namely the mmap_pages leading to a zero page sampling buffer. The bug was exposed only when compiling at -O0, probably because the compiler was padding variables at higher optimization levels. This patch fixes this problem by declaring user_interval as u64. This also avoids wrap-around issues for large period on 32-bit systems. Commiter note: Made it use OPT_U64(user_interval) after implementing OPT_U64 in the previous patch. Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <4bf11ae9.e88cd80a.06b0.ffffa8e3@mx.google.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
We have things like user_interval (-c/--count) in 'perf record' that needs this. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Arnaldo Carvalho de Melo authored
Suggested-by:
-
- 16 May, 2010 3 commits
-
-
Arnaldo Carvalho de Melo authored
In fact it is now added to the hot key list when newt_form__new is used, allowing us to remove the explicit assignment in all its users. The visible change is that <- will exit the menu that pops up when -> is pressed (and Enter when callchains are not being used). Suggested-by:
-
Arnaldo Carvalho de Melo authored
'D'/'d' for zooming into the DSO in the current highlighted hist entry, 'T'/'t' for zooming into the current thread. Suggested-by:
-
Arnaldo Carvalho de Melo authored
ESC still asks for confirmation. Suggested-by:
-
- 15 May, 2010 4 commits
-
-
Arnaldo Carvalho de Melo authored
Reported-by:
-
Arnaldo Carvalho de Melo authored
Right now that means that pressing the left arrow willl make the symbol annotation window to exit back to the main symbol histogram browser. This is another improvement on the UI fastpath, i.e. just the arrows and enter are enough for most browsing. Suggested-by:
-
-
Cyrill Gorcunov authored
Jaswinder reported this #GP: | | Message from syslogd@ht at May 14 09:39:32 ... | kernel:[ 314.908612] EIP: [<c100ccca>] | x86_perf_event_set_period+0x19d/0x1b2 SS:ESP 0068:edac3d70 | Ming has narrowed it down to a comparision issue between arguments with different sizes and signs. As result event index reached a wrong value which in turn led to a GP fault. At the same time it was found that p4_next_cntr has broken logic and should return the counter index only if it was not yet borrowed for another event. Reported-by:
Jaswinder Singh Rajput <jaswinderlinux@gmail.com> Reported-by:
-
- 14 May, 2010 1 commit
-
-
Arnaldo Carvalho de Melo authored
After we use the filters to zoom into DSOs or threads, we can use <- (left arrow) to zoom out from the last filter applied. It is still possible to zoom out of order by using the popup menu. With this we now have the zoom out operation on the browsing fast path, by allowing fast navigation using just the four arrors and the enter key to expand collapse callchains. Suggested-by:
-
