- 09 May, 2022 3 commits
-
-
Andre Przywara authored
The Arm SP810 IP is a "system controller", providing clocks, timer and a watchdog. Convert the DT binding to DT schema, to allow automatic validation. The existing .txt binding described all properties as required, but the assigned-clock* and clock-output-names are actually not (from a hardware perspective). The only existing driver I could find (in Linux) doesn't require them either, so drop those properties from the "required" list. Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220506140533.3566431-4-andre.przywara@arm.com
-
Andre Przywara authored
Convert the Arm Statisical Profiling Extension (SPE) binding to DT schema. Not much to see here, basically just the announcement that SPE is integrated on the system level and where the IRQ is routed to. Move it into the more suitable perf/ directory on the way. Signed-off-by:
-
Andre Przywara authored
The Page Request Interface (PRI) is an optional PCIe feature. As such, a SMMU would not need to handle it if the PCIe host bridge or the SMMU itself do not implement it. Also an SMMU could be connected to a platform device, without any PRI functionality whatsoever. In all cases there would be no SMMU PRI queue interrupt to be wired up to an interrupt controller. At the moment, with the "eventq,gerror,priq,cmdq-sync" order, we would need to sacrifice the command queue sync interrupt as well, which might not be desired. Relax the binding to allow specifying certain useful combinations of wired interrupts, for instance just the "gerror" interrupt, or omitting both "pri" and "cmdq-sync". Signed-off-by:
-
- 06 May, 2022 1 commit
-
-
Rob Herring authored
This reverts commit 694ed992. The same commit was also applied to stm32 tree. Signed-off-by:
-
- 05 May, 2022 1 commit
-
-
Stanislav Jakubek authored
Convert RDA Micro Timer bindings to DT schema format. Signed-off-by:
Stanislav Jakubek <stano.jakubek@gmail.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
-
- 03 May, 2022 8 commits
-
-
Kuldeep Singh authored
GENI(generic interface) based Qualcomm Universal Peripheral controller can support multiple serial interfaces like SPI,UART and I2C. Unlike other I2C controllers, QUP I2C bindings are present in parent schema. Move it out from parent to an individual binding and let parent refer to child schema later on. Please note, current schema isn't complete as it misses out few properties and thus, add these missing properties along the process. Signed-off-by:
Kuldeep Singh <singh.kuldeep87k@gmail.com> Reviewed-by:
-
Frank Rowand authored
New unittests for overlay notifiers reveal a memory leak in of_overlay_apply() when a notifier returns an error for action OF_OVERLAY_POST_APPLY. The pr_err() message is: OF: ERROR: memory leak, expected refcount 1 instead of 3, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /testcase-data/overlay-node/test-bus/test-unittest17 Change the error path to no longer call free_overlay_changeset(), and document that the caller of of_overlay_fdt_apply() may choose to remove the overlay. Update the unittest that triggered the error to expect the changed return values and to call of_overlay_remove(). Signed-off-by:
Frank Rowand <frank.rowand@sony.com> Signed-off-by:
-
Frank Rowand authored
Add tests for overlay apply and remove notifiers. Trigger errors for each of the notifier actions. These tests will reveal a memory leak problem when a notifier returns an error for action OF_OVERLAY_POST_APPLY. The pr_err() message is: OF: ERROR: memory leak, expected refcount 1 instead of 3, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /testcase-data/overlay-node/test-bus/test-unittest17 Signed-off-by:
-
Frank Rowand authored
The values of enum of_overlay_notify_action are used to index into array of_overlay_action_name. Add an entry to of_overlay_action_name for the value recently added to of_overlay_notify_action. Array of_overlay_action_name[] is moved into include/linux/of.h adjacent to enum of_overlay_notify_action to make the connection between the two more obvious if either is modified in the future. The only use of of_overlay_action_name is for error reporting in overlay_notify(). All callers of overlay_notify() report the same error, but with fewer details. Remove the redundant error reports in the callers. Fixes: 067c0987 ("of: overlay: rework overlay apply and remove kfree()s") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
David Heidelberg authored
These missing required properties are needed for smp2p binding reference checks. Also includes cosmetic change to the example formatting. Reviewed-by:
David Heidelberg <david@ixit.cz> Reviewed-by:
Manivannan Sadhasivam <mani@kernel.org> Signed-off-by:
-
David Heidelberg authored
Fill missing compatible already used in SM8450 DTS. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
-
Linus Walleij authored
The Broadcom BCM4751 family of (A-)GPS chips have been around for some years. The latest iteration BCM4753 is for example mounted on the Huawei HiKey970. Cc: devicetree@vger.kernel.org Cc: phone-devel@vger.kernel.org Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Rob Herring authored
The samsung,s524ad0xd1 compatible is in use, but not documented. According to arch/arm/mach-s3c/mach-smdk6410.c, the samsung,s524ad0xd1 is compatible with the 24c128. As the schema requires a fallback compatible to the corresponding Atmel compatible, 'atmel,24c128' is added as a fallback. Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Link: https://lore.kernel.org/r/20220426175938.2262966-1-robh@kernel.org
-
- 02 May, 2022 3 commits
-
-
David Collins authored
Make all interrupt related properties as optional instead of required. Some boards do not required PMIC IRQ support and it isn't needed to handle SPMI bus transactions, so specify it as optional. Signed-off-by:
David Collins <collinsd@codeaurora.org> Signed-off-by:
Fenglin Wu <quic_fenglinw@quicinc.com> Signed-off-by:
-
David Heidelberg authored
Convert Qualcomm PMIC SPMI binding to yaml format. Signed-off-by:
Vinod Koul <vkoul@kernel.org> Reviewed-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Dave Gerlach authored
Document that the firmware-name property can be used to indicate a file contains I2C sequences for PMIC voltage scaling during deep sleep. Based on previous work by Russ Dill. Signed-off-by:
Dave Gerlach <d-gerlach@ti.com> Signed-off-by:
Keerthy <j-keerthy@ti.com> [dfustini: split from driver patch and convert to json-schema] Signed-off-by:
Drew Fustini <dfustini@baylibre.com> Signed-off-by:
-
- 28 Apr, 2022 2 commits
-
-
Michael Walle authored
Convert the fsl,layerscape-scfg binding to the new YAML format. In the device trees, the device node always have a "syscon" compatible, which wasn't mentioned in the previous binding. Also added, compared to the original binding, is the interrupt-controller subnode as used in arch/arm/boot/dts/ls1021a.dtsi as well as the litte-endian and big-endian properties. Signed-off-by:
Michael Walle <michael@walle.cc> Reviewed-by:
-
Michael Walle authored
Convert the fsl,ls-extirq binding to the new YAML format. In contrast to the original binding documentation, there are three compatibles which are used in their corresponding device trees which have a specific compatible and the (already documented) fallback compatible: - "fsl,ls1046a-extirq", "fsl,ls1043a-extirq" - "fsl,ls2080a-extirq", "fsl,ls1088a-extirq" - "fsl,lx2160a-extirq", "fsl,ls1088a-extirq" Depending on the number of the number of the external IRQs which is usually 12 except for the LS1021A where there are only 6, the interrupt-map-mask was reduced from 0xffffffff to 0xf and 0x7 respectively and the number of interrupt-map entries have to match. Signed-off-by:
-
- 26 Apr, 2022 5 commits
-
-
Yassine Oudjana authored
Convert infracfg bindings to DT schema format. Not all drivers currently implement resets, so #reset-cells is made a required property only for those that do. Using power-controller in the example node name makes #power-domain-cells required causing a dt_binding_check error. To solve this, the node is renamed to syscon@10001000. Signed-off-by:
Yassine Oudjana <y.oudjana@protonmail.com> Reviewed-by:
-
Yassine Oudjana authored
Convert apmixedsys bindings to DT schema format. MT2701, MT7623 and MT7629 device trees currently have the syscon compatible without it being mentioned in the old DT bindings file which introduces dtbs_check errors when converting to DT schema as-is, so mediatek,mt2701-apmixedsys and mediatek,mt7629-apmixedsys are placed in the last items list with the syscon compatible, and syscon is added to the mediatek,mt7623-apmixedsys list. Signed-off-by:
-
Yassine Oudjana authored
Convert topckgen bindings to DT schema format. MT2701, MT7623 and MT7629 device trees currently have the syscon compatible without it being mentioned in the old DT bindings file which introduces dtbs_check errors when converting to DT schema as-is, so mediatek,mt2701-topckgen and mediatek,mt7629-topckgen are placed in the last items list with the syscon compatible, and syscon is added to the mediatek,mt7623-topckgen list. Signed-off-by:
-
Rob Herring authored
Drop a couple of old, empty .txt binding files which are no longer referenced. Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220422191958.2589318-1-robh@kernel.org
-
Gene Chen authored
Add bindings for MT6360 PMIC Signed-off-by:
Gene Chen <gene_chen@richtek.com> Signed-off-by:
-
- 25 Apr, 2022 9 commits
-
-
Tony Lindgren authored
Let's add compatible for ti,am654-timer for TI am64, am65 and j72 SoCs. As the timer hardware is the same between am64, am65 and j72 we use the compatible name for the earliest SoC with this timer. The timer interrupts are not routable for the operating system for some timers on am6. Let's make sure the interrupts are configured for the timers on all other SoCs. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Tony Lindgren authored
Let's update the TI timer binding to use yaml. As this binding is specific to the TI dual-mode timers also known as dm-timers, let's use file name ti,timer-dm.yaml to avoid confusion with other timers. We add checks for the deprecated ti,hwmods property as done for other TI device driver bindings earlier. We also correct the issue with the old binding that was out of date for several properties. The am43 related timers are undocumented, but compatible with the am3 timers. Let's add the am43 timers too. The dm814 and dm816 timers are missing, let's add them. Some timers on some SoCs are dual mapped, like the ABE timers on omap4 and 5. The reg property maxItems must be updated to 2. The timer clocks can be managed by the parent interconnect target module with no clocks assigned for the timer node. And in some cases, the SoC may need to configure additional system clock for the timer in addition to the functional clock. The clock names are optional and not specific to the comptible property. For example, dra7 timers on l3 interconnect do not need clock-names, while the timers on dra7 l4 interconnect need them with both being compatible with ti,omap5430-timer. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by:
-
Biju Das authored
Document the General Timer Module(a.k.a OSTM) found on the RZ/G2UL SoC. OSTM module is identical to one found RZ/G2L SoC. No driver changes are required as generic compatible string "renesas,ostm" will be used as a fallback. Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Michael Walle authored
Convert the fsl,layerscape-dcfg binding to the new YAML format. In the device trees, the device node always have a "syscon" compatible, which wasn't mentioned in the previous binding. One thing added here, compared to the original binding is the clock controller subnode of the LS1028A SoC and its "simple-mfd" compatible as used in arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi as well as the little-endian and big-endian properties. Signed-off-by:
-
Biju Das authored
Document RZ/G2UL I2C bindings. RZ/G2UL I2C is identical to one found on the RZ/G2L SoC. No driver changes are required as RZ/G2L compatible string "renesas,riic-rz" will be used as a fallback. Signed-off-by:
-
Linus Walleij authored
This rewrites the Mediatek GNSS bindings in YAML. Cc: devicetree@vger.kernel.org Cc: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Frank Rowand authored
Fix various kfree() issues related to of_overlay_apply(). - Double kfree() of fdt and tree when init_overlay_changeset() returns an error. - free_overlay_changeset() free the root of the unflattened overlay (variable tree) instead of the memory that contains the unflattened overlay. - For the case of a failure during applying an overlay, move kfree() of new_fdt and overlay_mem into free_overlay_changeset(), which is called by the function that allocated them. - For the case of removing an overlay, the kfree() of new_fdt and overlay_mem remains in free_overlay_changeset(). - Check return value of of_fdt_unflatten_tree() for error instead of checking the returned value of overlay_root. - When storing pointers to allocated objects in ovcs, do so as near to the allocation as possible instead of in deeply layered function. More clearly document policy related to lifetime of pointers into overlay memory. Double kfree() Reported-by:Slawomir Stepien <slawomir.stepien@nokia.com> Signed-off-by:
-
Frank Rowand authored
Variables change name across function calls when there is not a good reason to do so. Fix by changing "fdt" to "new_fdt" and "tree" to "overlay_root". The name disparity was confusing when creating the following commit. The name changes are in this separate commit to make review of the following commmit less complex. Signed-off-by:
-
Nuno Sá authored
We should not break overlay notifications on NOTIFY_{OK|STOP} otherwise we might break on the first fragment. We should only stop notifications if a *real* errno is returned by one of the listeners. Fixes: a1d19bd4 ("of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove") Signed-off-by:Nuno Sá <nuno.sa@analog.com> Signed-off-by:
-
- 19 Apr, 2022 5 commits
-
-
Krzysztof Kozlowski authored
The dtschema uses yamllint, if present, to check the syntax of the files, so document this. Signed-off-by:
-
Bryan O'Donoghue authored
Add compatible msm8936. msm8936 covers both msm8936 and msm8939. The relevant driver already has the compat string but, we haven't documented it. Fixes: d6e52482 ("drivers: soc: Add MSM8936 SMD RPM compatible") Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Acked-by:
-
Stefano Stabellini authored
When the length of the string is zero of_property_read_string should return -ENODATA according to the description of the function. However, of_property_read_string doesn't check prop->length. If prop->length is zero, return -ENODATA. Without this patch the following command in u-boot: fdt set /chosen/node property-name results in of_property_read_string returning -EILSEQ when attempting to read property-name. With this patch, it returns -ENODATA as expected. Signed-off-by:
Stefano Stabellini <stefano.stabellini@xilinx.com> Signed-off-by:
-
Drew Fustini authored
Add documentation for the ti,set-io-isolation DT property on the wkup_m3_ipc node which tells the wkup_m3_ipc driver to use the wkup_m3 to enable IO Isolation during low power mode transitions on am43xx platforms. Signed-off-by:
-
Rob Herring authored
Pick up new meta-schema warning fixes.
-
- 14 Apr, 2022 3 commits
-
-
Rob Herring authored
It's not good practice to define multiple types for the same property, so factor out the type reference making the properties always an uint32-array with a length of 1 or 3 items. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/20220413140016.3131013-1-robh@kernel.org
-
Rob Herring authored
Scalar properties shouldn't have array constraints (minItems, maxItems, items). These constraints can simply be dropped with any constraints under 'items' moved up a level. Cc: Agathe Porte <agathe.porte@nokia.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jean Delvare <jdelvare@suse.com> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org> Cc: Olivier Moysan <olivier.moysan@foss.st.com> Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mark Brown <broonie@kernel.org> Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Cc: Yunfei Dong <yunfei.dong@mediatek.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: linux-hwmon@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-iio@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: linux-remoteproc@vger.kernel.org Cc: linux-spi@vger.kernel.org Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
Mark Brown <broonie@kernel.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220413140121.3132837-1-robh@kernel.org
-
Krzysztof Kozlowski authored
Convert the Qualcomm Shared Memory Point 2 Point bindings to DT Schema. Changes against original bindings: enforce only specific names of child nodes, instead of any names. Signed-off-by:
-
