Skip to content

L
linux
Switch branch/tag
  1. 13 Aug, 2017 5 commits
    • Xin Long's avatar
      ipv6: set rt6i_protocol properly in the route when it is installed · f725c587
      Xin Long authored 
      
[ Upstream commit b91d5329 ]

After commit c2ed1880 ("net: ipv6: check route protocol when
deleting routes"), ipv6 route checks rt protocol when trying to
remove a rt entry.

It introduced a side effect causing 'ip -6 route flush cache' not
to work well. When flushing caches with iproute, all route caches
get dumped from kernel then removed one by one by sending DELROUTE
requests to kernel for each cache.

The thing is iproute sends the request with the cache whose proto
is set with RTPROT_REDIRECT by rt6_fill_node() when kernel dumps
it. But in kernel the rt_cache protocol is still 0, which causes
the cache not to be matched and removed.

So the real reason is rt6i_protocol in the route is not set when
it is allocated. As David Ahern's suggestion, this patch is to
set rt6i_protocol properly in the route when it is installed and
remove the codes setting rtm_protocol according to rt6i_flags in
rt6_fill_node.

This is also an improvement to keep rt6i_protocol consistent with
rtm_protocol.

Fixes: c2ed1880 ("net: ipv6: check route protocol when deleting routes")
Reported-by: default avatarJianlin Shi <jishi@redhat.com>
Suggested-by: default avatarDavid Ahern <dsahern@gmail.com>
Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f725c587
    • Eric Dumazet's avatar
      net: fix keepalive code vs TCP_FASTOPEN_CONNECT · 963f8fb6
      Eric Dumazet authored 
      
[ Upstream commit 2dda6400 ]

syzkaller was able to trigger a divide by 0 in TCP stack [1]

Issue here is that keepalive timer needs to be updated to not attempt
to send a probe if the connection setup was deferred using
TCP_FASTOPEN_CONNECT socket option added in linux-4.11

[1]
 divide error: 0000 [#1] SMP
 CPU: 18 PID: 0 Comm: swapper/18 Not tainted
 task: ffff986f62f4b040 ti: ffff986f62fa2000 task.ti: ffff986f62fa2000
 RIP: 0010:[<ffffffff8409cc0d>]  [<ffffffff8409cc0d>] __tcp_select_window+0x8d/0x160
 Call Trace:
  <IRQ>
  [<ffffffff8409d951>] tcp_transmit_skb+0x11/0x20
  [<ffffffff8409da21>] tcp_xmit_probe_skb+0xc1/0xe0
  [<ffffffff840a0ee8>] tcp_write_wakeup+0x68/0x160
  [<ffffffff840a151b>] tcp_keepalive_timer+0x17b/0x230
  [<ffffffff83b3f799>] call_timer_fn+0x39/0xf0
  [<ffffffff83b40797>] run_timer_softirq+0x1d7/0x280
  [<ffffffff83a04ddb>] __do_softirq+0xcb/0x257
  [<ffffffff83ae03ac>] irq_exit+0x9c/0xb0
  [<ffffffff83a04c1a>] smp_apic_timer_interrupt+0x6a/0x80
  [<ffffffff83a03eaf>] apic_timer_interrupt+0x7f/0x90
  <EOI>
  [<ffffffff83fed2ea>] ? cpuidle_enter_state+0x13a/0x3b0
  [<ffffffff83fed2cd>] ? cpuidle_enter_state+0x11d/0x3b0

Tested:

Following packetdrill no longer crashes the kernel

`echo 0 >/proc/sys/net/ipv4/tcp_timestamps`

// Cache warmup: send a Fast Open cookie request
    0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
   +0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
   +0 setsockopt(3, SOL_TCP, TCP_FASTOPEN_CONNECT, [1], 4) = 0
   +0 connect(3, ..., ...) = -1 EINPROGRESS (Operation is now in progress)
   +0 > S 0:0(0) <mss 1460,nop,nop,sackOK,nop,wscale 8,FO,nop,nop>
 +.01 < S. 123:123(0) ack 1 win 14600 <mss 1460,nop,nop,sackOK,nop,wscale 6,FO abcd1234,nop,nop>
   +0 > . 1:1(0) ack 1
   +0 close(3) = 0
   +0 > F. 1:1(0) ack 1
   +0 < F. 1:1(0) ack 2 win 92
   +0 > .  2:2(0) ack 2

   +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 4
   +0 fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0
   +0 setsockopt(4, SOL_TCP, TCP_FASTOPEN_CONNECT, [1], 4) = 0
   +0 setsockopt(4, SOL_SOCKET, SO_KEEPALIVE, [1], 4) = 0
 +.01 connect(4, ..., ...) = 0
   +0 setsockopt(4, SOL_TCP, TCP_KEEPIDLE, [5], 4) = 0
   +10 close(4) = 0

`echo 1 >/proc/sys/net/ipv4/tcp_timestamps`

Fixes: 19f6d3f3 ("net/tcp-fastopen: Add new API support")
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Reported-by: default avatarDmitry Vyukov <dvyukov@google.com>
Cc: Wei Wang <weiwan@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      963f8fb6
    • Yuchung Cheng's avatar
      tcp: avoid setting cwnd to invalid ssthresh after cwnd reduction states · 4fe36242
      Yuchung Cheng authored 
      
[ Upstream commit ed254971 ]

If the sender switches the congestion control during ECN-triggered
cwnd-reduction state (CA_CWR), upon exiting recovery cwnd is set to
the ssthresh value calculated by the previous congestion control. If
the previous congestion control is BBR that always keep ssthresh
to TCP_INIFINITE_SSTHRESH, cwnd ends up being infinite. The safe
step is to avoid assigning invalid ssthresh value when recovery ends.
Signed-off-by: default avatarYuchung Cheng <ycheng@google.com>
Signed-off-by: default avatarNeal Cardwell <ncardwell@google.com>
Acked-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4fe36242
    • Guillaume Nault's avatar
      ppp: fix xmit recursion detection on ppp channels · 5028e6c9
      Guillaume Nault authored 
      
[ Upstream commit 0a0e1a85 ]

Commit e5dadc65 ("ppp: Fix false xmit recursion detect with two ppp
devices") dropped the xmit_recursion counter incrementation in
ppp_channel_push() and relied on ppp_xmit_process() for this task.
But __ppp_channel_push() can also send packets directly (using the
.start_xmit() channel callback), in which case the xmit_recursion
counter isn't incremented anymore. If such packets get routed back to
the parent ppp unit, ppp_xmit_process() won't notice the recursion and
will call ppp_channel_push() on the same channel, effectively creating
the deadlock situation that the xmit_recursion mechanism was supposed
to prevent.

This patch re-introduces the xmit_recursion counter incrementation in
ppp_channel_push(). Since the xmit_recursion variable is now part of
the parent ppp unit, incrementation is skipped if the channel doesn't
have any. This is fine because only packets routed through the parent
unit may enter the channel recursively.

Finally, we have to ensure that pch->ppp is not going to be modified
while executing ppp_channel_push(). Instead of taking this lock only
while calling ppp_xmit_process(), we now have to hold it for the full
ppp_channel_push() execution. This respects the ppp locks ordering
which requires locking ->upl before ->downl.

Fixes: e5dadc65 ("ppp: Fix false xmit recursion detect with two ppp devices")
Signed-off-by: default avatarGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5028e6c9
    • Gao Feng's avatar
      ppp: Fix false xmit recursion detect with two ppp devices · 67410cd2
      Gao Feng authored 
      
[ Upstream commit e5dadc65 ]

The global percpu variable ppp_xmit_recursion is used to detect the ppp
xmit recursion to avoid the deadlock, which is caused by one CPU tries to
lock the xmit lock twice. But it would report false recursion when one CPU
wants to send the skb from two different PPP devices, like one L2TP on the
PPPoE. It is a normal case actually.

Now use one percpu member of struct ppp instead of the gloable variable to
detect the xmit recursion of one ppp device.

Fixes: 55454a56 ("ppp: avoid dealock on recursive xmit")
Signed-off-by: default avatarGao Feng <gfree.wind@vip.163.com>
Signed-off-by: default avatarLiu Jianying <jianying.liu@ikuai8.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      67410cd2
  3. 11 Aug, 2017 35 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7