- 14 Jun, 2022 6 commits
-
-
Pierre-Louis Bossart authored
We currently log the initiation of an IPC as well at its success. [ 3906.106987] kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: ipc tx: 0x80010000: GLB_DAI_MSG: CONFIG [ 3906.107189] kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: ipc tx succeeded: 0x80010000: GLB_DAI_MSG: CONFIG This is overkill in most cases, we already have a message thrown in case of errors and have tracepoints enabled to check for IPC duration. The only case where this might be useful is to check if there is an interleaved IPC RX. Add a flag and only print those logs if enabled. In addition, the DMA_POSITION_UPDATE for traces brings limited information in most cases and pollutes the logs for no good reason. [ 3906.322256] kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: ipc rx: 0x90020000: GLB_TRACE_MSG: DMA_POSITION [ 3906.322308] kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: ipc rx done: 0x90020000: GLB_TRACE_MSG: DMA_POSITION [ 3906.822261] kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: ipc rx: 0x90020000: GLB_TRACE_MSG: DMA_POSITION [ 3906.822319] kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: ipc rx done: 0x90020000: GLB_TRACE_MSG: DMA_POSITION [ 3907.822261] kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: ipc rx: 0x90020000: GLB_TRACE_MSG: DMA_POSITION [ 3907.822319] kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: ipc rx done: 0x90020000: GLB_TRACE_MSG: DMA_POSITION [ 3908.822251] kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: ipc rx: 0x90020000: GLB_TRACE_MSG: DMA_POSITION [ 3908.822309] kernel: sof-audio-pci-intel-tgl 0000:00:1f.3: ipc rx done: 0x90020000: GLB_TRACE_MSG: DMA_POSITION This information is only helpful when debugging the trace support, not when using the trace. Add a flag to only print DMA position update logs if enabled. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20220610214601.43005-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Shengjiu Wang authored
Add i.MX93 compatible string and specific soc data Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1654840042-7069-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Shengjiu Wang authored
Add compatible string "fsl,imx93-mqs" for i.MX93 platform Signed-off-by:
-
Pierre-Louis Bossart authored
The same message was added twice for dai and link_dma, remove the latter one and add dai name and direction to better understand problematic sequences. Signed-off-by:
-
Charles Keepax authored
Update this driver to the new direct clock producer/consumer defines. It appears this driver was added with the inversion taken account of but still uses the CODEC defines so no inversion of the producer/consumer is necessary. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220613161552.481337-2-ckeepax@opensource.cirrus.comSigned-off-by:
-
Charles Keepax authored
Recent updates accidentally updated the clock producer/consumer specifiers on this device as part of refactoring the CPU side of the DAI links. However, this device sits on the CODEC side and shouldn't have been updated. Partially revert the changes keeping the switch to the new clock terminology but going back to the CODEC defines. Fixes: 7cc3965f ("ASoC: sunxi: Update to use set_fmt_new callback") Reported-by:
Samuel Holland <samuel@sholland.org> Signed-off-by:
-
- 13 Jun, 2022 3 commits
-
-
Yong Zhi authored
Enable on-board rt711 based sound card for MTL RVP. Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
Uday M Bhat <uday.m.bhat@intel.com> Signed-off-by:
-
Mark Brown authored
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>: This set of patches includes changes to add the topology, control and PCM ops for IPC4. It also includes a couple of patches to set the IPC4 BE DAI trigger ops for SSP/DMIC/HDA type DAI's.
-
Mark Brown authored
As part of retiring the old defines used to specify DAI formats update the hdmi_codec driver to use the modern names, including the variables in the struct hdmi_codec_daifmt exported to the DRM drivers. In updating this I did note that the only use of this information in DRM drivers is to reject clock provider settings, thinking about what this hardware is doing I rather suspect that there might not be any hardware out there which needs the configuration so it may be worth considering just having hdmi-codec support only clock consumer. Signed-off-by:
-
- 10 Jun, 2022 31 commits
-
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: The context save functionality with IPC4 is triggered by sending a message to the firmware about the pending power down of the primary core by the host. In order to have this functionality implemented in a clean way we need to introduce a new IPC level PM ops for core state management and use that instead of open coding IPC messages here and there. The first patch updates the ctx store/ctx_restore documentation to clarify that they are optional.
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: This series handles the race which can result missing the first position update after the trace is enabled. In short: the firmware might send the position update (if we have enough trace data generated) after the dma-trace is enabled by the TRACE_DMA_PARAMS_EXT message. Depending on scheduling, load, preemption on Linux side we have seen that occasionally this first position update got missed and we missed reading it out. A new state and more strict handling of host_offset can overcome this issue, making the dtrace more reliable.
-
Mark Brown authored
Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>: Move all the digital and IIR gains form using SX_TLV to S8_TLV, these gains are actually 8 bit gains with 7th signed bit and ranges from -84dB to +40dB Tested on DB410c with Headset playback
-
Mark Brown authored
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>: Our tests platforms do use realtek codecs, while implementing avs driver and machine boards for it, we identified quite a lot of problems with those codec drivers.
-
Pierre-Louis Bossart authored
Use pm_runtime_resume_and_get() to replace the pm_runtime_get_sync() and pm_runtime_put_noidle() pattern. No functional changes. Signed-off-by:
-
Peter Ujfalusi authored
The dmesg log message of "Firmware exception" causes lots of confusion as the snd_sof_handle_fw_exception() is only called in case of an IPC tx timeout, where such a message does not make much sense. To not limit the snd_sof_handle_fw_exception() handler to just one error case, add a parameter to allow the caller to specify a meaningful message to be printed. Signed-off-by:
Yaochun Hung <yc.hung@mediatek.com> Link: https://lore.kernel.org/r/20220610080421.31453-1-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Martin Povišer authored
The new method is called just before the card is registered, providing an opportune time for machine-level drivers to do some final controls amending: deactivating individual controls or obtaining control references for later use. Some controls can be created by DAPM after 'late_probe' has been called, hence the need for this new method. Signed-off-by:
Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220606191910.16580-5-povik+lin@cutebit.orgSigned-off-by:
-
Cezary Rojewski authored
Clean up in order to use and expose .set_jack callback. Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20220609133541.3984886-4-amadeuszx.slawinski@linux.intel.comSigned-off-by:
-
Cezary Rojewski authored
Clean up in order to use and expose .set_jack callback. Signed-off-by:
-
Cezary Rojewski authored
Improves readability by making sure the work is always initialized. Signed-off-by:
-
Srinivas Kandagatla authored
move all the digital gains form using SX_TLV to S8_TLV, these gains are actually 8 bit gains with 7th signed bit and ranges from -84dB to +40dB rest of the Qualcomm wcd codecs uses these properly. Fixes: 8c4f021d ("ASoC: wcd9335: add basic controls") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220609111901.318047-3-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Srinivas Kandagatla authored
move all the digital gains form using SX_TLV to S8_TLV, these gains are actually 8 bit gains with 7th signed bit and ranges from -84dB to +40dB rest of the Qualcomm wcd codecs uses these properly. Fixes: ef8a4757 ("ASoC: msm8916-wcd-digital: Add sidetone support") Fixes: 150db8c5 ("ASoC: codecs: Add msm8916-wcd digital codec") Signed-off-by:
-
Bard Liao authored
Add IPC4 SoundWire blob. It includes a common IPC4 gateway and a multiple ALH configuration struct which is used for storing the aggregated SoundWire stream information. Signed-off-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
-
Ranjani Sridharan authored
Define and set the dai_get_clk_op for IPC4. Signed-off-by:
-
Ranjani Sridharan authored
The copier config for SSP and DMIC type DAI copiers needs to be parsed and matched with the runtime hw_config from the NHLT table. Along with this, also add the change to set the node_id for these copier types. Co-developed-by:
Jaska Uimonen <jaska.uimonen@linux.intel.com> Signed-off-by:
-
Ranjani Sridharan authored
Add a new topology IPC op, parse_manifest. Define and set the op for IPC4 and IPC4. Co-developed-by:
-
Ranjani Sridharan authored
Add a couple of structures for parsing and saving the topology manifest data. Co-developed-by:
-
Ranjani Sridharan authored
Init and save the BIOS NHLT as part of the IPC4 FW data. Add a kernel module param to override the BIOS NHLT with the NHLT from the topology. Also, add the ops_free callback for all HDA platforms to free the NHLT. Co-developed-by:
-
Ranjani Sridharan authored
Add the ops_free callback in struct sof_dev_desc. Signed-off-by:
-
Ranjani Sridharan authored
Add BE DAI drv ops for IPC4 for DMIC, SSP and HDA type DAI's. Signed-off-by:
-
Ranjani Sridharan authored
Expose the sof_ipc4_set_pipeline_state() function as it will be used in the IPC4-specific BE DAI driver ops. Signed-off-by:
-
Ranjani Sridharan authored
Define and set the dai_config op for IPC4. Co-developed-by:
Rander Wang <rander.wang@linux.intel.com> Signed-off-by:
-
Ranjani Sridharan authored
Define and set the route_setup/route_free ops for IPC4. Co-developed-by:
-
Ranjani Sridharan authored
Define and set the widget_setup/widget_free ops for IPC4. Co-developed-by:
-
Ranjani Sridharan authored
Define and set the PCM ops for IPC4. Co-developed-by:
-
Ranjani Sridharan authored
Define the kcontrol IO ops for volume type controls for IPC4. Support for other kcontrol types will be added later. Co-developed-by:
-
Ranjani Sridharan authored
Define the control_setup op for IPC4 topology IPC ops to handle the volume kcontrol types. Support for other kcontrol types will be added in the follow up patches. Co-developed-by:
-
Ranjani Sridharan authored
Add support for parsing and preparing mixer type widgets. Define the token ID's and the associated token arrays needed to parse these widgets. Co-developed-by:
Paul Olaru <paul.olaru@oss.nxp.com> Link: https://lore.kernel.org/r/20220609032643.916882-9-ranjani.sridharan@linux.intel.comSigned-off-by:
-
Ranjani Sridharan authored
Add support for parsing and preparing pga type widgets. Define the token ID's and the associated token arrays needed to parse these widgets. Co-developed-by:
-
Ranjani Sridharan authored
Define the prepare op for the DAI type widgets for IPC4. The prepare op is responsible for choosing the input/output audio formats for these widgets based on the runtime PCM params, assigning the instance ID and updating the total memory usage for the pipelines these widgets belong to. Co-developed-by:
-
Ranjani Sridharan authored
Define the prepare op for the AIF type widgets for IPC4. The prepare op is responsible for choosing the input/output audio formats for these widgets based on the runtime PCM params, assigning the instance ID and updating the total memory usage for the pipelines these widgets belong to. Co-developed-by:
-
