- 03 Sep, 2020 11 commits
-
-
Pierre-Louis Bossart authored
Detect cases where the clock is assumed to be stopped but the IP is not in the relevant state. There is no real way to recover here, but adding an error log can help detect bad programming sequences or race conditions. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200901150556.19432-9-yung-chuan.liao@linux.intel.comSigned-off-by:
Vinod Koul <vkoul@kernel.org>
-
Pierre-Louis Bossart authored
Use platform-specific information to decide when to use hw_sync, not only a number of links > 1. Signed-off-by:
-
Pierre-Louis Bossart authored
set the flags as required by hardware implementation Signed-off-by:
-
Pierre-Louis Bossart authored
Hardware-based synchronization is typically required when the bus->multi_link flag is set. On Intel platforms, when the Cadence IP is configured in 'Multi Master Mode', the hardware synchronization is required even when a stream only uses a single segment. The existing code only deal with hardware synchronization when a stream uses more than one segment so to remain backwards compatible we add a configuration threshold. For Intel cases this threshold will be set to one, other platforms may be able to use the SSP-based sync in those cases. Signed-off-by:
-
Pierre-Louis Bossart authored
Deal with the BUS_RESET case, which is the default. The only change is to add support for the exit sequence using the syncArm/syncGo mode for the exit reset sequence. Signed-off-by:
-
Pierre-Louis Bossart authored
The multi-link support is enabled with a hardware gsync signal connecting all links. All commands and operations which typically are handled on an SSP boundary will be deferred further and enabled across all links with the 'syncGo' sequence. Signed-off-by:
-
Pierre-Louis Bossart authored
with multiple links synchronized in hardware, retrying commands in software is not recommended. Signed-off-by:
-
Pierre-Louis Bossart authored
If we enabled the clock stop mode and suspend, we need to disable the shim wake. We do so only if the parent is pm_runtime active due to power rail dependencies. GitHub issue: https://github.com/thesofproject/linux/issues/1678Signed-off-by:
-
Pierre-Louis Bossart authored
The existing code allocates memory for the total number of ports. This only works if the ports are contiguous, but will break if e.g. a Devices uses port0, 1, and 14. The port_ready[] array would contain 3 elements, which would lead to an out-of-bounds access. Conversely in other cases, the wrong port index would be used leading to timeouts on prepare. This can be fixed by allocating for the worst-case of 15 ports (DP0..DP14). In addition since the number is now fixed, we can use an array instead of a dynamic allocation. Signed-off-by:
Rander Wang <rander.wang@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20200831134318.11443-4-yung-chuan.liao@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
A Device may have at most 15 physical ports (DP0, DP1..DP14). Signed-off-by:
-
Pierre-Louis Bossart authored
port_ready will be changed to a fixed array in sdw.h and all initialization work will be done at soundwire side in the following patch. So remove them from codec drivers. Signed-off-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200831134318.11443-2-yung-chuan.liao@linux.intel.comSigned-off-by:
-
- 26 Aug, 2020 1 commit
-
-
Bard Liao authored
When CONFIG_PM_SLEEP is not defined, GCC throws compilation warnings: drivers/soundwire/intel.c:1799:12: warning: ‘intel_resume’ defined but not used [-Wunused-function] static int intel_resume(struct device *dev) ^~~~~~~~~~~~ drivers/soundwire/intel.c:1683:12: warning: ‘intel_suspend’ defined but not used [-Wunused-function] static int intel_suspend(struct device *dev) ^~~~~~~~~~~~~ Fix by using __maybe_unused macro. Suggested-by:
-
- 18 Aug, 2020 12 commits
-
-
Rander Wang authored
When all the links are suspended, the HDaudio controller may suspend and the power rails to the SoundWire IP may be disabled, requiring a complete re-initialization/enumeration on resume. However, if one or more Masters remained active, the HDaudio controller will remain active and the power rails will remain enabled. As a result, during the link resume step we can check if the context was preserved by verifying if the clock was stopped, and avoid doing a complete bus reset and re-enumeration. Signed-off-by:
Rander Wang <rander.wang@intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
In this mode, on restart the bus restarts immediately, the Slaves remain synchronized and all context is kept intact. Signed-off-by:
-
Pierre-Louis Bossart authored
When none of the clock stop quirks is specified, the Master IP will assume the context is preserved and will not reset the Bus and restart enumeration. Due to power rail dependencies, the HDaudio controller needs to remain powered and prevented from executing its pm_runtime suspend routine. This choice of course has a power impact, and this mode should only be selected when latency requirements are critical or the parent device can enter D0ix modes. Signed-off-by:
-
Pierre-Louis Bossart authored
In case the clock needs to keep running, we need to prevent the Master from entering pm_runtime suspend. Signed-off-by:
-
Rander Wang authored
Move existing pm_runtime suspend under the CLK_STOP_TEARDOWN case. In this mode the Master IP will lose all context but in-band wakes are supported. On pm_runtime resume a complete re-enumeration will be performed after a bus reset. Signed-off-by:
-
Pierre-Louis Bossart authored
Now that we have options, add support for TEARDOWN mode (same functionality as existing code) All other modes will be added in follow-up patches. Signed-off-by:
-
Pierre-Louis Bossart authored
Add quirk and pm_runtime idle scheduling to let the Master suspend if no Slaves become attached. This can happen when a link is not marked as disabled and has devices exposed in the DSDT, if the power is controlled by sideband means or the link includes a pluggable connector. Signed-off-by:
-
Bard Liao authored
The .prepare() callback is invoked for normal streaming, underflows or during the system resume transition. In the latter case, the context for the ALH PDIs is lost, and the DSP is not initialized properly either, but the bus parameters don't need to be recomputed. Conversely, when doing a regular .prepare() during an underflow, the ALH/SHIM registers shall not be changed as the hardware cannot be reprogrammed after the DMA started (hardware spec requirement). This patch adds storage of PDI and hw_params in the DAI dma context, and the difference between the types of .prepare() usages is handled via a simple boolean, updated when suspending, and tested for in the .prepare() case. Signed-off-by:
-
Pierre-Louis Bossart authored
This helps make sure they are all UNATTACHED and reset the state machines. At the moment we perform a bus reset both for system resume and pm_runtime resume, this will be modified when clock-stop mode is supported Signed-off-by:
-
Pierre-Louis Bossart authored
Previous patches took care of the case where the master device is pm_runtime 'suspended' when a system suspend occurs. In the case where the master device was not suspended, e.g. if suspend occurred while streaming audio, Intel validation noticed a race condition: the pm_runtime suspend may conflict with the enumeration started by the system resume. This can be simply fixed by updating the status before exiting system resume. GitHub issue: https://github.com/thesofproject/linux/issues/1482Signed-off-by:
-
Pierre-Louis Bossart authored
The system resume does the entire bus re-initialization and brings it to full-power. If the device was pm_runtime suspended, there is no need to run the pm_runtime resume sequence after the system runtime. Follow the documentation from runtime_pm.rst, and conditionally disable, set_active and re-enable the device on system resume. Note that pm_runtime_suspended() is used instead of pm_runtime_status_suspended() so that we can deal with the case where pm_runtime is disabled. Signed-off-by:
-
Pierre-Louis Bossart authored
Add basic hooks in DAI .startup and .shutdown callbacks. The SoundWire IP should be powered between those two calls. The power dependencies between SoundWire and DSP are handled with the parent/child relationship, before the SoundWire master device becomes active the parent device will become active and power-up the shared rails. For now the strategy is to rely on complete enumeration when the device becomes active, so the code is a copy/paste of the sequence for system suspend/resume. In future patches, the strategy will optionally be to rely on clock stop if the enumeration time is prohibitive or when the devices connected to a link can signal a wake. A module parameter is added to make integration of new Slave devices easier, to e.g. keep the device active or prevent clock-stop. Note that we need to we have to disable runtime pm before device unregister, otherwise we will see "Failed to power up link: -11" error on module remove test. Signed-off-by:
-
- 17 Aug, 2020 2 commits
-
-
Pierre-Louis Bossart authored
Implement suspend/resume capabilities (not runtime_pm for now) The resume part is essentially a full-blown re-enumeration. When S0ix is supported, we will select clock stop mode when the ACPI target state is S0, and tear down the link for S3. Signed-off-by:
-
Bard Liao authored
The hierarchy of soundwire devices is platform device -> M device -> S device. A S device is physically attached on the platform device. So the platform device should be resumed when a S device is resumed. As the bridge of platform device and S device, we have to implement runtime pm on M driver. We have set runtime pm ops in M driver already, but still need to enable runtime pm. Signed-off-by:
-
- 16 Aug, 2020 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A few differerent things in here. Seems like syzbot got some more io_uring bits wired up, and we got a handful of reports and the associated fixes are in here. General fixes too, and a lot of them marked for stable. Lastly, a bit of fallout from the async buffered reads, where we now more easily trigger short reads. Some applications don't really like that, so the io_read() code now handles short reads internally, and got a cleanup along the way so that it's now easier to read (and documented). We're now passing tests that failed before" * tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block: io_uring: short circuit -EAGAIN for blocking read attempt io_uring: sanitize double poll handling io_uring: internally retry short reads io_uring: retain iov_iter state over io_read/io_write calls task_work: only grab task signal lock when needed io_uring: enable lookup of links holding inflight files io_uring: fail poll arm on queue proc failure io_uring: hold 'ctx' reference around task_work queue + execute fs: RWF_NOWAIT should imply IOCB_NOIO io_uring: defer file table grabbing request cleanup for locked requests io_uring: add missing REQ_F_COMP_LOCKED for nested requests io_uring: fix recursive completion locking on oveflow flush io_uring: use TWA_SIGNAL for task_work uncondtionally io_uring: account locked memory before potential error case io_uring: set ctx sq/cq entry count earlier io_uring: Fix NULL pointer dereference in loop_rw_iter() io_uring: add comments on how the async buffered read retry works io_uring: io_async_buf_func() need not test page bit
-
Mike Rapoport authored
Commit 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") converted parisc to use generic version of pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for PMD. Restore the original version of pmd_alloc_one() for parisc, just use GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and memset. Fixes: 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") Reported-by:
Meelis Roos <mroos@linux.ee> Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Tested-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.eeSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes on the block side of things: - Discard granularity fix (Coly) - rnbd cleanups (Guoqing) - md error handling fix (Dan) - md sysfs fix (Junxiao) - Fix flush request accounting, which caused an IO slowdown for some configurations (Ming) - Properly propagate loop flag for partition scanning (Lennart)" * tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block: block: fix double account of flush request's driver tag loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE rnbd: no need to set bi_end_io in rnbd_bio_map_kern rnbd: remove rnbd_dev_submit_io md-cluster: Fix potential error pointer dereference in resize_bitmaps() block: check queue's limits.discard_granularity in __blkdev_issue_discard() md: get sysfs entry after redundancy attr group create -
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fix from Palmer Dabbelt: "I collected a single fix during the merge window: we managed to break the early trap setup on !MMU, this fixes it" * tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Setup exception vector for nommu platform
-
git://git.libc.org/linux-shLinus Torvalds authored
Pull arch/sh updates from Rich Felker: "Cleanup, SECCOMP_FILTER support, message printing fixes, and other changes to arch/sh" * tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits) sh: landisk: Add missing initialization of sh_io_port_base sh: bring syscall_set_return_value in line with other architectures sh: Add SECCOMP_FILTER sh: Rearrange blocks in entry-common.S sh: switch to copy_thread_tls() sh: use the generic dma coherent remap allocator sh: don't allow non-coherent DMA for NOMMU dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig sh: unexport register_trapped_io and match_trapped_io_handler sh: don't include <asm/io_trapped.h> in <asm/io.h> sh: move the ioremap implementation out of line sh: move ioremap_fixed details out of <asm/io.h> sh: remove __KERNEL__ ifdefs from non-UAPI headers sh: sort the selects for SUPERH alphabetically sh: remove -Werror from Makefiles sh: Replace HTTP links with HTTPS ones arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA* sh: stacktrace: Remove stacktrace_ops.stack() sh: machvec: Modernize printing of kernel messages sh: pci: Modernize printing of kernel messages ...
-
- 15 Aug, 2020 8 commits
-
-
Jens Axboe authored
One case was missed in the short IO retry handling, and that's hitting -EAGAIN on a blocking attempt read (eg from io-wq context). This is a problem on sockets that are marked as non-blocking when created, they don't carry any REQ_F_NOWAIT information to help us terminate them instead of perpetually retrying. Fixes: 227c0c96 ("io_uring: internally retry short reads") Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
There's a bit of confusion on the matching pairs of poll vs double poll, depending on if the request is a pure poll (IORING_OP_POLL_ADD) or poll driven retry. Add io_poll_get_double() that returns the double poll waitqueue, if any, and io_poll_get_single() that returns the original poll waitqueue. With that, remove the argument to io_poll_remove_double(). Finally ensure that wait->private is cleared once the double poll handler has run, so that remove knows it's already been seen. Cc: stable@vger.kernel.org # v5.8 Reported-by: syzbot+7f617d4a9369028b8a2c@syzkaller.appspotmail.com Fixes: 18bceab1 ("io_uring: allow POLL_ADD with double poll_wait() users") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds authored
Pull more perf tools updates from Arnaldo Carvalho de Melo: "Fixes: - Fixes for 'perf bench numa'. - Always memset source before memcpy in 'perf bench mem'. - Quote CC and CXX for their arguments to fix build in environments using those variables to pass more than just the compiler names. - Fix module symbol processing, addressing regression detected via "perf test". - Allow multiple probes in record+script_probe_vfs_getname.sh 'perf test' entry. Improvements: - Add script to autogenerate socket family name id->string table from copy of kernel header, used so far in 'perf trace'. - 'perf ftrace' improvements to provide similar options for this utility so that one can go from 'perf record', 'perf trace', etc to 'perf ftrace' just by changing the name of the subcommand. - Prefer new "sched:sched_waking" trace event when it exists in 'perf sched' post processing. - Update POWER9 metrics to utilize other metrics. - Fall back to querying debuginfod if debuginfo not found locally. Miscellaneous: - Sync various kvm headers with kernel sources" * tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits) perf ftrace: Make option description initials all capital letters perf build-ids: Fall back to debuginfod query if debuginfo not found perf bench numa: Remove dead code in parse_nodes_opt() perf stat: Update POWER9 metrics to utilize other metrics perf ftrace: Add change log perf: ftrace: Add set_tracing_options() to set all trace options perf ftrace: Add option --tid to filter by thread id perf ftrace: Add option -D/--delay to delay tracing perf: ftrace: Allow set graph depth by '--graph-opts' perf ftrace: Add support for trace option tracing_thresh perf ftrace: Add option 'verbose' to show more info for graph tracer perf ftrace: Add support for tracing option 'irq-info' perf ftrace: Add support for trace option funcgraph-irqs perf ftrace: Add support for trace option sleep-time perf ftrace: Add support for tracing option 'func_stack_trace' perf tools: Add general function to parse sublevel options perf ftrace: Add option '--inherit' to trace children processes perf ftrace: Show trace column header perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size perf ftrace: Factor out function write_tracing_file_int() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes and small updates all around the place: - Fix mitigation state sysfs output - Fix an FPU xstate/sxave code assumption bug triggered by Architectural LBR support - Fix Lightning Mountain SoC TSC frequency enumeration bug - Fix kexec debug output - Fix kexec memory range assumption bug - Fix a boundary condition in the crash kernel code - Optimize porgatory.ro generation a bit - Enable ACRN guests to use X2APIC mode - Reduce a __text_poke() IRQs-off critical section for the benefit of PREEMPT_RT" * tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternatives: Acquire pte lock with interrupts enabled x86/bugs/multihit: Fix mitigation reporting when VMX is not in use x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs x86/purgatory: Don't generate debug info for purgatory.ro x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC kexec_file: Correctly output debugging information for the PT_LOAD ELF header kexec: Improve & fix crash_exclude_mem_range() to handle overlapping ranges x86/crash: Correct the address boundary of function parameters x86/acrn: Remove redundant chars from ACRN signature x86/acrn: Allow ACRN guest to use X2APIC mode -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Two fixes: fix a new tracepoint's output value, and fix the formatting of show-state syslog printouts" * tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Fix the alignment of the show-state debug output sched: Fix use of count for nr_running tracepoint
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Misc fixes, an expansion of perf syscall access to CAP_PERFMON privileged tools, plus a RAPL HW-enablement for Intel SPR platforms" * tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/rapl: Add support for Intel SPR platform perf/x86/rapl: Support multiple RAPL unit quirks perf/x86/rapl: Fix missing psys sysfs attributes hw_breakpoint: Remove unused __register_perf_hw_breakpoint() declaration kprobes: Remove show_registers() function prototype perf/core: Take over CAP_SYS_PTRACE creds to CAP_PERFMON capability
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixlets from Ingo Molnar: "A documentation fix and a 'fallthrough' macro update" * tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Convert to use the preferred 'fallthrough' macro Documentation/locking/locktypes: Fix a typo
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: - some code cleanup - a couple of static analysis fixes - setattr: try to pick a fid associated with the file rather than the dentry, which might sometimes matter * tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux: 9p: Remove unneeded cast from memory allocation 9p: remove unused code in 9p net/9p: Fix sparse endian warning in trans_fd.c 9p: Fix memory leak in v9fs_mount 9p: retrieve fid from file when file instance exist.
-
