- 08 Aug, 2011 40 commits
-
-
Felix Fietkau authored
Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
Currently ath9k presents the internal calibrated noise floor as channel noise measurement, however this results in highly chip specific values that are only useful as relative measurements but do not resemble any real channel noise values. In order to give a much better approximation of the real channel noise, add the difference between the measured noise floor and the nominal chip specific noise floor to the default minimum channel noise value, which is currently used to calculate the signal strength from the RSSI value. This may not be 100% accurate, but it's much better than what's there before. Signed-off-by:
-
Baruch Siach authored
Make mesh_preq_queue_lock locking consistent with mesh_queue_preq() using spin_lock_bh(). Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
Javier Cardona <javier@cozybit.com> Signed-off-by:
-
Daniel Drake authored
OLPC power management code has recently gone upstream. This piece completes the puzzle for libertas_usb, which now programs the OLPC EC for wlan wakeups when they have been requested. Signed-off-by:
Daniel Drake <dsd@laptop.org> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Felix Fietkau authored
When testing for tx power, bypass the default limits. Signed-off-by:
-
Felix Fietkau authored
Use the previously calculated maximum of all rates instead of just the one from the lowest rate of the selected PHY mode. Signed-off-by:
-
Felix Fietkau authored
It is always 0 Signed-off-by:
-
Pavel Roskin authored
Signed-off-by:
Pavel Roskin <proski@gnu.org> Signed-off-by:
-
Pavel Roskin authored
Remove unnecessary includes from base.h. Add includes to other files as necessary. Don't include base.h unless needed. Move declarations for functions in base.c from ath5k.h to base.h. Use a better named define to protect base.h against double inclusion. Signed-off-by:
-
Pavel Roskin authored
Signed-off-by:
-
Pavel Roskin authored
Without CONFIG_HERMES_PRISM, only match cards that have "Version 01.01" as the third product ID. Those have Agere firmware. With CONFIG_HERMES_PRISM, match all 0x0156:0x0002 cards. Signed-off-by:
-
Pavel Roskin authored
Cards with numeric ID 0x0156:0x0002 and third ID "Version 01.02" can be assumed to have Intersil firmware. Cards with Agere firmware use "Version 01.01". Signed-off-by:
-
Pavel Roskin authored
This is needed to match wireless cards with Intersil firmware that have ID 0x0156:0x0002 and the third ID "Version 01.02". Such cards are currently matched by orinoco_cs, which doesn't support WPA. They should be matched by hostap_cs. The first and the second product ID vary widely, so there are few users with some particular IDs. Of those, very few can submit a patch for hostap_cs or write a useful bugreport. It's still important to support their hardware properly. With PCMCIA_DEVICE_MANF_CARD_PROD_ID3, it should be possible to cover the remaining Intersil based designs that kept the numeric ID and the "version" of the reference design. Signed-off-by:
-
Pavel Roskin authored
Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Helmut Schaa authored
According to 802.11-2007, 7.3.1.14 it is compliant to use a buf_size of 0 in ADDBA requests. But some devices (AVM Fritz Stick N) arn't able to handle that correctly and will reply with an ADDBA reponse with a buf_size of 0 which in turn will disallow BA sessions for these devices. To work around this problem, initialize hw.max_tx_aggregation_subframes to the maximum AMPDU buffer size 0x40. Using 0 as default for the bufsize was introduced in commit 5dd36bc9 (mac80211: allow advertising correct maximum aggregate size). Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Helmut Schaa authored
If we receive an ADDBA response with status code 0 and a buf_size of 0 we should stop the TX BA session as otherwise we'll end up queuing frames in ieee80211_tx_prep_agg forever instead of sending them out as non AMPDUs. This fixes a problem with AVM Fritz Stick N wireless devices where frames to this device are not transmitted anymore by mac80211. Signed-off-by:
-
Pavel Roskin authored
Devices supported by b43legacy don't support 64-bit DMA. Signed-off-by:
-
Wey-Yi Guy authored
Add support for v2 of enhanced sensitivity table for 2000 series products Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Wey-Yi Guy authored
Update the default sensitivity value for both 5000 and 6000 series devices Signed-off-by:
-
Johannes Berg authored
For iwlwifi, I decided not to use this API since it just increased the complexity for little gain. Since nobody else intends to use it, let's kill it again. If anybody later needs to have it, we can always revive it then. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
The previous P2P implementation turned out to not work well and new uCode capabilities were added to support P2P. Modify the driver to take advantage of those, and also discover P2P support automatically based on a uCode flag instead of having a Kconfig symbol for P2P. Signed-off-by:
-
Johannes Berg authored
The availability of contexts depends on the firmware capabilities. Currently only the presence of the second context depends on it, but soon P2P support will also be different. Move the context initialisation code to the firmware-dependent setup before registering with mac80211 to make it easier to handle. Signed-off-by:
-
Johannes Berg authored
We're working on improvements for the firmware for some devices, and need to bump the API for those since they won't be backward compatible completely (the earlier patch reserving queue 10 for P2P). Bump the API version to 6 for those devices but don't warn users of version 5 yet. Signed-off-by:
-
Johannes Berg authored
We sometimes need to support new firmware API for a while before we can publish them since testing them fully takes a long time. We could keep all the new code private, but that causes plenty of problems and sometimes we can give a pre-release version of firmware to people who need to test. However, when we just bump the API version, the driver will warn everybody that their firmware is outdated, when in fact it isn't. (Currently our case for this doesn't really change the API but bumping the API version is necessary because the firmware isn't fully backward compatible) In order to handle this in the future, add a new "api_ok" version; only below this will the driver warn that the uCode is too old. Signed-off-by:
-
Wey-Yi Guy authored
For _bgn device, remove ht40 support for 5.2GHz, it is probably ok since the "band" is not support but just feel strange. Signed-off-by:
-
Wey-Yi Guy authored
1000 series are 1x2 devices, the old default using static smps which only use single antenna for rx, set the default to dynamic smps. Signed-off-by:
-
Johannes Berg authored
New uCode images will use queue 10 for TX during scan (for P2P offchannel operation scan). We'll bump the API version of those, but before we need to reserve queue 10 and stop using it for aggregation. To simplify the code, always reserve it, we could continue using it on older uCode images but that'd be rather complicated. Also, we'll set it up to map to the right FIFO as needed later, but as we don't use the queue now that doesn't hurt. Signed-off-by:
-
Pavel Roskin authored
When checking for the band, use channel->band. Change ath5k_hw_nic_wakeup() and ath5k_channel_ok() to take ieee80211_channel. Change ath5k_hw_radio_revision() to take ieee80211_band. Signed-off-by:
Sedat Dilek <sedat.dilek@gmail.com> Acked-by:
Nick Kossifidis <mickflemm@gmail.com> Signed-off-by:
-
Pavel Roskin authored
XR is a proprietary feature of the chipset. It's not supported and should not be supported. Signed-off-by:
-
Pavel Roskin authored
struct ath5k_avg_val is unused. In struct ath5k_hw, lladdr, ah_radar and ah_mac_revision are write-only, rxbufsize is unused, ah_phy is write-only and referenced by unused macros. In struct ath5k_vif, lladdr is write-only. Remove AR5K_TUNE_RADAR_ALERT, which has no effect. Signed-off-by:
-
Pavel Roskin authored
Signed-off-by:
-
Hauke Mehrtens authored
Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Acked-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Hauke Mehrtens authored
This patch add support for the bcma bus. Broadcom uses only Mips 74K CPUs on the new SoC and on the old ons using ssb bus there are no Mips 74K CPUs. Signed-off-by:
-
Hauke Mehrtens authored
Signed-off-by:
-
Hauke Mehrtens authored
Prepare bcm47xx to support different System buses. Before adding support for bcma it should be possible to build bcm47xx without the need of ssb. With this patch bcm47xx does not directly contain a ssb_bus, but a union contain all the supported system buses. As a SoC just uses one system bus a union is a good choice. Signed-off-by:
-
Hauke Mehrtens authored
Add method to return the clock of the CPU. This is needed by the arch code to calculate the mips_hpt_frequency. Signed-off-by:
-
Hauke Mehrtens authored
This adds support for serial console to bcma, when operating on an SoC. Signed-off-by:
-
Hauke Mehrtens authored
This adds a mips driver to bcma. This is only found on embedded devices. For now the driver just initializes the irqs used on this system. Signed-off-by:
-
Hauke Mehrtens authored
This patch adds support for using bcma on a Broadcom SoC as the system bus. An SoC like the bcm4716 could register this bus and use it to searches for the bcma cores and register the devices on this bus. BCMA_HOSTTYPE_NONE was intended for SoCs at first but BCMA_HOSTTYPE_SOC is a better name. Acked-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Hauke Mehrtens authored
The chip common and mips core have to be setup early in the boot process to get the cpu clock. bcma_bus_early_register() gets pointers to some space to store the core data and searches for the chip common and mips core and initializes chip common. After that was done and the kernel is out of early boot we just have to run bcma_bus_register() and it will search for the other cores, initialize and register them. The cores are getting the same numbers as before. Acked-by:
-
