Skip to content

L
linux
Switch branch/tag
  1. 22 Aug, 2022 13 commits
    • Roi Dayan's avatar
      net/mlx5e: TC, Add missing policer validation · f7a4e867
      Roi Dayan authored 
      There is a missing policer validation when offloading police action
with tc action api. Add it.

Fixes: 7d1a5ce4 ("net/mlx5e: TC, Support tc action api for police")
Signed-off-by: default avatarRoi Dayan <roid@nvidia.com>
Reviewed-by: default avatarMaor Dickman <maord@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      f7a4e867
    • Aya Levin's avatar
      net/mlx5e: Fix wrong application of the LRO state · 7b3707fc
      Aya Levin authored 
      Driver caches packet merge type in mlx5e_params instance which must be
in perfect sync with the netdev_feature's bit.
Prior to this patch, in certain conditions (*) LRO state was set in
mlx5e_params, while netdev_feature's bit was off. Causing the LRO to
be applied on the RQs (HW level).

(*) This can happen only on profile init (mlx5e_build_nic_params()),
when RQ expect non-linear SKB and PCI is fast enough in comparison to
link width.

Solution: remove setting of packet merge type from
mlx5e_build_nic_params() as netdev features are not updated.

Fixes: 619a8f2a ("net/mlx5e: Use linear SKB in Striding RQ")
Signed-off-by: default avatarAya Levin <ayal@nvidia.com>
Reviewed-by: default avatarTariq Toukan <tariqt@nvidia.com>
Reviewed-by: default avatarMaxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      7b3707fc
    • Moshe Shemesh's avatar
      net/mlx5: Avoid false positive lockdep warning by adding lock_class_key · d59b73a6
      Moshe Shemesh authored 
      Add a lock_class_key per mlx5 device to avoid a false positive
"possible circular locking dependency" warning by lockdep, on flows
which lock more than one mlx5 device, such as adding SF.

kernel log:
 ======================================================
 WARNING: possible circular locking dependency detected
 5.19.0-rc8+ #2 Not tainted
 ------------------------------------------------------
 kworker/u20:0/8 is trying to acquire lock:
 ffff88812dfe0d98 (&dev->intf_state_mutex){+.+.}-{3:3}, at: mlx5_init_one+0x2e/0x490 [mlx5_core]

 but task is already holding lock:
 ffff888101aa7898 (&(&notifier->n_head)->rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x5a/0x130

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&(&notifier->n_head)->rwsem){++++}-{3:3}:
        down_write+0x90/0x150
        blocking_notifier_chain_register+0x53/0xa0
        mlx5_sf_table_init+0x369/0x4a0 [mlx5_core]
        mlx5_init_one+0x261/0x490 [mlx5_core]
        probe_one+0x430/0x680 [mlx5_core]
        local_pci_probe+0xd6/0x170
        work_for_cpu_fn+0x4e/0xa0
        process_one_work+0x7c2/0x1340
        worker_thread+0x6f6/0xec0
        kthread+0x28f/0x330
        ret_from_fork+0x1f/0x30

 -> #0 (&dev->intf_state_mutex){+.+.}-{3:3}:
        __lock_acquire+0x2fc7/0x6720
        lock_acquire+0x1c1/0x550
        __mutex_lock+0x12c/0x14b0
        mlx5_init_one+0x2e/0x490 [mlx5_core]
        mlx5_sf_dev_probe+0x29c/0x370 [mlx5_core]
        auxiliary_bus_probe+0x9d/0xe0
        really_probe+0x1e0/0xaa0
        __driver_probe_device+0x219/0x480
        driver_probe_device+0x49/0x130
        __device_attach_driver+0x1b8/0x280
        bus_for_each_drv+0x123/0x1a0
        __device_attach+0x1a3/0x460
        bus_probe_device+0x1a2/0x260
        device_add+0x9b1/0x1b40
        __auxiliary_device_add+0x88/0xc0
        mlx5_sf_dev_state_change_handler+0x67e/0x9d0 [mlx5_core]
        blocking_notifier_call_chain+0xd5/0x130
        mlx5_vhca_state_work_handler+0x2b0/0x3f0 [mlx5_core]
        process_one_work+0x7c2/0x1340
        worker_thread+0x59d/0xec0
        kthread+0x28f/0x330
        ret_from_fork+0x1f/0x30

  other info that might help us debug this:

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&(&notifier->n_head)->rwsem);
                                lock(&dev->intf_state_mutex);
                                lock(&(&notifier->n_head)->rwsem);
   lock(&dev->intf_state_mutex);

  *** DEADLOCK ***

 4 locks held by kworker/u20:0/8:
  #0: ffff888150612938 ((wq_completion)mlx5_events){+.+.}-{0:0}, at: process_one_work+0x6e2/0x1340
  #1: ffff888100cafdb8 ((work_completion)(&work->work)#3){+.+.}-{0:0}, at: process_one_work+0x70f/0x1340
  #2: ffff888101aa7898 (&(&notifier->n_head)->rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x5a/0x130
  #3: ffff88813682d0e8 (&dev->mutex){....}-{3:3}, at:__device_attach+0x76/0x460

 stack backtrace:
 CPU: 6 PID: 8 Comm: kworker/u20:0 Not tainted 5.19.0-rc8+
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 Workqueue: mlx5_events mlx5_vhca_state_work_handler [mlx5_core]
 Call Trace:
  <TASK>
  dump_stack_lvl+0x57/0x7d
  check_noncircular+0x278/0x300
  ? print_circular_bug+0x460/0x460
  ? lock_chain_count+0x20/0x20
  ? register_lock_class+0x1880/0x1880
  __lock_acquire+0x2fc7/0x6720
  ? register_lock_class+0x1880/0x1880
  ? register_lock_class+0x1880/0x1880
  lock_acquire+0x1c1/0x550
  ? mlx5_init_one+0x2e/0x490 [mlx5_core]
  ? lockdep_hardirqs_on_prepare+0x400/0x400
  __mutex_lock+0x12c/0x14b0
  ? mlx5_init_one+0x2e/0x490 [mlx5_core]
  ? mlx5_init_one+0x2e/0x490 [mlx5_core]
  ? _raw_read_unlock+0x1f/0x30
  ? mutex_lock_io_nested+0x1320/0x1320
  ? __ioremap_caller.constprop.0+0x306/0x490
  ? mlx5_sf_dev_probe+0x269/0x370 [mlx5_core]
  ? iounmap+0x160/0x160
  mlx5_init_one+0x2e/0x490 [mlx5_core]
  mlx5_sf_dev_probe+0x29c/0x370 [mlx5_core]
  ? mlx5_sf_dev_remove+0x130/0x130 [mlx5_core]
  auxiliary_bus_probe+0x9d/0xe0
  really_probe+0x1e0/0xaa0
  __driver_probe_device+0x219/0x480
  ? auxiliary_match_id+0xe9/0x140
  driver_probe_device+0x49/0x130
  __device_attach_driver+0x1b8/0x280
  ? driver_allows_async_probing+0x140/0x140
  bus_for_each_drv+0x123/0x1a0
  ? bus_for_each_dev+0x1a0/0x1a0
  ? lockdep_hardirqs_on_prepare+0x286/0x400
  ? trace_hardirqs_on+0x2d/0x100
  __device_attach+0x1a3/0x460
  ? device_driver_attach+0x1e0/0x1e0
  ? kobject_uevent_env+0x22d/0xf10
  bus_probe_device+0x1a2/0x260
  device_add+0x9b1/0x1b40
  ? dev_set_name+0xab/0xe0
  ? __fw_devlink_link_to_suppliers+0x260/0x260
  ? memset+0x20/0x40
  ? lockdep_init_map_type+0x21a/0x7d0
  __auxiliary_device_add+0x88/0xc0
  ? auxiliary_device_init+0x86/0xa0
  mlx5_sf_dev_state_change_handler+0x67e/0x9d0 [mlx5_core]
  blocking_notifier_call_chain+0xd5/0x130
  mlx5_vhca_state_work_handler+0x2b0/0x3f0 [mlx5_core]
  ? mlx5_vhca_event_arm+0x100/0x100 [mlx5_core]
  ? lock_downgrade+0x6e0/0x6e0
  ? lockdep_hardirqs_on_prepare+0x286/0x400
  process_one_work+0x7c2/0x1340
  ? lockdep_hardirqs_on_prepare+0x400/0x400
  ? pwq_dec_nr_in_flight+0x230/0x230
  ? rwlock_bug.part.0+0x90/0x90
  worker_thread+0x59d/0xec0
  ? process_one_work+0x1340/0x1340
  kthread+0x28f/0x330
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x1f/0x30
  </TASK>

Fixes: 6a327321 ("net/mlx5: SF, Port function state change support")
Signed-off-by: default avatarMoshe Shemesh <moshe@nvidia.com>
Reviewed-by: default avatarShay Drory <shayd@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      d59b73a6
    • Roy Novich's avatar
      net/mlx5: Fix cmd error logging for manage pages cmd · 090f3e4f
      Roy Novich authored 
      When the driver unloads, give/reclaim_pages may fail as PF driver in
teardown flow, current code will lead to the following kernel log print
'failed reclaiming pages: err 0'.

Fix it to get same behavior as before the cited commits,
by calling mlx5_cmd_check before handling error state.
mlx5_cmd_check will verify if the returned error is an actual error
needed to be handled by the driver or not and will return an
appropriate value.

Fixes: 8d564292 ("net/mlx5: Remove redundant error on reclaim pages")
Fixes: 4dac2f10 ("net/mlx5: Remove redundant notify fail on give pages")
Signed-off-by: default avatarRoy Novich <royno@nvidia.com>
Reviewed-by: default avatarMoshe Shemesh <moshe@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      090f3e4f
    • Vlad Buslov's avatar
      net/mlx5: Disable irq when locking lag_lock · 8e93f294
      Vlad Buslov authored 
      The lag_lock is taken from both process and softirq contexts which results
lockdep warning[0] about potential deadlock. However, just disabling
softirqs by using *_bh spinlock API is not enough since it will cause
warning in some contexts where the lock is obtained with hard irqs
disabled. To fix the issue save current irq state, disable them before
obtaining the lock an re-enable irqs from saved state after releasing it.

[0]:

[Sun Aug  7 13:12:29 2022] ================================
[Sun Aug  7 13:12:29 2022] WARNING: inconsistent lock state
[Sun Aug  7 13:12:29 2022] 5.19.0_for_upstream_debug_2022_08_04_16_06 #1 Not tainted
[Sun Aug  7 13:12:29 2022] --------------------------------
[Sun Aug  7 13:12:29 2022] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[Sun Aug  7 13:12:29 2022] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[Sun Aug  7 13:12:29 2022] ffffffffa06dc0d8 (lag_lock){+.?.}-{2:2}, at: mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core]
[Sun Aug  7 13:12:29 2022] {SOFTIRQ-ON-W} state was registered at:
[Sun Aug  7 13:12:29 2022]   lock_acquire+0x1c1/0x550
[Sun Aug  7 13:12:29 2022]   _raw_spin_lock+0x2c/0x40
[Sun Aug  7 13:12:29 2022]   mlx5_lag_add_netdev+0x13b/0x480 [mlx5_core]
[Sun Aug  7 13:12:29 2022]   mlx5e_nic_enable+0x114/0x470 [mlx5_core]
[Sun Aug  7 13:12:29 2022]   mlx5e_attach_netdev+0x30e/0x6a0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]   mlx5e_resume+0x105/0x160 [mlx5_core]
[Sun Aug  7 13:12:29 2022]   mlx5e_probe+0xac3/0x14f0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]   auxiliary_bus_probe+0x9d/0xe0
[Sun Aug  7 13:12:29 2022]   really_probe+0x1e0/0xaa0
[Sun Aug  7 13:12:29 2022]   __driver_probe_device+0x219/0x480
[Sun Aug  7 13:12:29 2022]   driver_probe_device+0x49/0x130
[Sun Aug  7 13:12:29 2022]   __driver_attach+0x1e4/0x4d0
[Sun Aug  7 13:12:29 2022]   bus_for_each_dev+0x11e/0x1a0
[Sun Aug  7 13:12:29 2022]   bus_add_driver+0x3f4/0x5a0
[Sun Aug  7 13:12:29 2022]   driver_register+0x20f/0x390
[Sun Aug  7 13:12:29 2022]   __auxiliary_driver_register+0x14e/0x260
[Sun Aug  7 13:12:29 2022]   mlx5e_init+0x38/0x90 [mlx5_core]
[Sun Aug  7 13:12:29 2022]   vhost_iotlb_itree_augment_rotate+0xcb/0x180 [vhost_iotlb]
[Sun Aug  7 13:12:29 2022]   do_one_initcall+0xc4/0x400
[Sun Aug  7 13:12:29 2022]   do_init_module+0x18a/0x620
[Sun Aug  7 13:12:29 2022]   load_module+0x563a/0x7040
[Sun Aug  7 13:12:29 2022]   __do_sys_finit_module+0x122/0x1d0
[Sun Aug  7 13:12:29 2022]   do_syscall_64+0x3d/0x90
[Sun Aug  7 13:12:29 2022]   entry_SYSCALL_64_after_hwframe+0x46/0xb0
[Sun Aug  7 13:12:29 2022] irq event stamp: 3596508
[Sun Aug  7 13:12:29 2022] hardirqs last  enabled at (3596508): [<ffffffff813687c2>] __local_bh_enable_ip+0xa2/0x100
[Sun Aug  7 13:12:29 2022] hardirqs last disabled at (3596507): [<ffffffff813687da>] __local_bh_enable_ip+0xba/0x100
[Sun Aug  7 13:12:29 2022] softirqs last  enabled at (3596488): [<ffffffff81368a2a>] irq_exit_rcu+0x11a/0x170
[Sun Aug  7 13:12:29 2022] softirqs last disabled at (3596495): [<ffffffff81368a2a>] irq_exit_rcu+0x11a/0x170
[Sun Aug  7 13:12:29 2022]
                           other info that might help us debug this:
[Sun Aug  7 13:12:29 2022]  Possible unsafe locking scenario:

[Sun Aug  7 13:12:29 2022]        CPU0
[Sun Aug  7 13:12:29 2022]        ----
[Sun Aug  7 13:12:29 2022]   lock(lag_lock);
[Sun Aug  7 13:12:29 2022]   <Interrupt>
[Sun Aug  7 13:12:29 2022]     lock(lag_lock);
[Sun Aug  7 13:12:29 2022]
                            *** DEADLOCK ***

[Sun Aug  7 13:12:29 2022] 4 locks held by swapper/0/0:
[Sun Aug  7 13:12:29 2022]  #0: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: mlx5e_napi_poll+0x43/0x20a0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  #1: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: netif_receive_skb_list_internal+0x2d7/0xd60
[Sun Aug  7 13:12:29 2022]  #2: ffff888144a18b58 (&br->hash_lock){+.-.}-{2:2}, at: br_fdb_update+0x301/0x570
[Sun Aug  7 13:12:29 2022]  #3: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: atomic_notifier_call_chain+0x5/0x1d0
[Sun Aug  7 13:12:29 2022]
                           stack backtrace:
[Sun Aug  7 13:12:29 2022] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0_for_upstream_debug_2022_08_04_16_06 #1
[Sun Aug  7 13:12:29 2022] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[Sun Aug  7 13:12:29 2022] Call Trace:
[Sun Aug  7 13:12:29 2022]  <IRQ>
[Sun Aug  7 13:12:29 2022]  dump_stack_lvl+0x57/0x7d
[Sun Aug  7 13:12:29 2022]  mark_lock.part.0.cold+0x5f/0x92
[Sun Aug  7 13:12:29 2022]  ? lock_chain_count+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? unwind_next_frame+0x1c4/0x1b50
[Sun Aug  7 13:12:29 2022]  ? secondary_startup_64_no_verify+0xcd/0xdb
[Sun Aug  7 13:12:29 2022]  ? mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? stack_access_ok+0x1d0/0x1d0
[Sun Aug  7 13:12:29 2022]  ? start_kernel+0x3a7/0x3c5
[Sun Aug  7 13:12:29 2022]  __lock_acquire+0x1260/0x6720
[Sun Aug  7 13:12:29 2022]  ? lock_chain_count+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? lock_chain_count+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? register_lock_class+0x1880/0x1880
[Sun Aug  7 13:12:29 2022]  ? mark_lock.part.0+0xed/0x3060
[Sun Aug  7 13:12:29 2022]  ? stack_trace_save+0x91/0xc0
[Sun Aug  7 13:12:29 2022]  lock_acquire+0x1c1/0x550
[Sun Aug  7 13:12:29 2022]  ? mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? lockdep_hardirqs_on_prepare+0x400/0x400
[Sun Aug  7 13:12:29 2022]  ? __lock_acquire+0xd6f/0x6720
[Sun Aug  7 13:12:29 2022]  _raw_spin_lock+0x2c/0x40
[Sun Aug  7 13:12:29 2022]  ? mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  mlx5_esw_bridge_rep_vport_num_vhca_id_get+0x1a0/0x600 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? mlx5_esw_bridge_update_work+0x90/0x90 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? lock_acquire+0x1c1/0x550
[Sun Aug  7 13:12:29 2022]  mlx5_esw_bridge_switchdev_event+0x185/0x8f0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? mlx5_esw_bridge_port_obj_attr_set+0x3e0/0x3e0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? check_chain_key+0x24a/0x580
[Sun Aug  7 13:12:29 2022]  atomic_notifier_call_chain+0xd7/0x1d0
[Sun Aug  7 13:12:29 2022]  br_switchdev_fdb_notify+0xea/0x100
[Sun Aug  7 13:12:29 2022]  ? br_switchdev_set_port_flag+0x310/0x310
[Sun Aug  7 13:12:29 2022]  fdb_notify+0x11b/0x150
[Sun Aug  7 13:12:29 2022]  br_fdb_update+0x34c/0x570
[Sun Aug  7 13:12:29 2022]  ? lock_chain_count+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? br_fdb_add_local+0x50/0x50
[Sun Aug  7 13:12:29 2022]  ? br_allowed_ingress+0x5f/0x1070
[Sun Aug  7 13:12:29 2022]  ? check_chain_key+0x24a/0x580
[Sun Aug  7 13:12:29 2022]  br_handle_frame_finish+0x786/0x18e0
[Sun Aug  7 13:12:29 2022]  ? check_chain_key+0x24a/0x580
[Sun Aug  7 13:12:29 2022]  ? br_handle_local_finish+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? __lock_acquire+0xd6f/0x6720
[Sun Aug  7 13:12:29 2022]  ? sctp_inet_bind_verify+0x4d/0x190
[Sun Aug  7 13:12:29 2022]  ? xlog_unpack_data+0x2e0/0x310
[Sun Aug  7 13:12:29 2022]  ? br_handle_local_finish+0x20/0x20
[Sun Aug  7 13:12:29 2022]  br_nf_hook_thresh+0x227/0x380 [br_netfilter]
[Sun Aug  7 13:12:29 2022]  ? setup_pre_routing+0x460/0x460 [br_netfilter]
[Sun Aug  7 13:12:29 2022]  ? br_handle_local_finish+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? br_nf_pre_routing_ipv6+0x48b/0x69c [br_netfilter]
[Sun Aug  7 13:12:29 2022]  br_nf_pre_routing_finish_ipv6+0x5c2/0xbf0 [br_netfilter]
[Sun Aug  7 13:12:29 2022]  ? br_handle_local_finish+0x20/0x20
[Sun Aug  7 13:12:29 2022]  br_nf_pre_routing_ipv6+0x4c6/0x69c [br_netfilter]
[Sun Aug  7 13:12:29 2022]  ? br_validate_ipv6+0x9e0/0x9e0 [br_netfilter]
[Sun Aug  7 13:12:29 2022]  ? br_nf_forward_arp+0xb70/0xb70 [br_netfilter]
[Sun Aug  7 13:12:29 2022]  ? br_nf_pre_routing+0xacf/0x1160 [br_netfilter]
[Sun Aug  7 13:12:29 2022]  br_handle_frame+0x8a9/0x1270
[Sun Aug  7 13:12:29 2022]  ? br_handle_frame_finish+0x18e0/0x18e0
[Sun Aug  7 13:12:29 2022]  ? register_lock_class+0x1880/0x1880
[Sun Aug  7 13:12:29 2022]  ? br_handle_local_finish+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? bond_handle_frame+0xf9/0xac0 [bonding]
[Sun Aug  7 13:12:29 2022]  ? br_handle_frame_finish+0x18e0/0x18e0
[Sun Aug  7 13:12:29 2022]  __netif_receive_skb_core+0x7c0/0x2c70
[Sun Aug  7 13:12:29 2022]  ? check_chain_key+0x24a/0x580
[Sun Aug  7 13:12:29 2022]  ? generic_xdp_tx+0x5b0/0x5b0
[Sun Aug  7 13:12:29 2022]  ? __lock_acquire+0xd6f/0x6720
[Sun Aug  7 13:12:29 2022]  ? register_lock_class+0x1880/0x1880
[Sun Aug  7 13:12:29 2022]  ? check_chain_key+0x24a/0x580
[Sun Aug  7 13:12:29 2022]  __netif_receive_skb_list_core+0x2d7/0x8a0
[Sun Aug  7 13:12:29 2022]  ? lock_acquire+0x1c1/0x550
[Sun Aug  7 13:12:29 2022]  ? process_backlog+0x960/0x960
[Sun Aug  7 13:12:29 2022]  ? lockdep_hardirqs_on_prepare+0x129/0x400
[Sun Aug  7 13:12:29 2022]  ? kvm_clock_get_cycles+0x14/0x20
[Sun Aug  7 13:12:29 2022]  netif_receive_skb_list_internal+0x5f4/0xd60
[Sun Aug  7 13:12:29 2022]  ? do_xdp_generic+0x150/0x150
[Sun Aug  7 13:12:29 2022]  ? mlx5e_poll_rx_cq+0xf6b/0x2960 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? mlx5e_poll_ico_cq+0x3d/0x1590 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  napi_complete_done+0x188/0x710
[Sun Aug  7 13:12:29 2022]  mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? __queue_work+0x53c/0xeb0
[Sun Aug  7 13:12:29 2022]  __napi_poll+0x9f/0x540
[Sun Aug  7 13:12:29 2022]  net_rx_action+0x420/0xb70
[Sun Aug  7 13:12:29 2022]  ? napi_threaded_poll+0x470/0x470
[Sun Aug  7 13:12:29 2022]  ? __common_interrupt+0x79/0x1a0
[Sun Aug  7 13:12:29 2022]  __do_softirq+0x271/0x92c
[Sun Aug  7 13:12:29 2022]  irq_exit_rcu+0x11a/0x170
[Sun Aug  7 13:12:29 2022]  common_interrupt+0x7d/0xa0
[Sun Aug  7 13:12:29 2022]  </IRQ>
[Sun Aug  7 13:12:29 2022]  <TASK>
[Sun Aug  7 13:12:29 2022]  asm_common_interrupt+0x22/0x40
[Sun Aug  7 13:12:29 2022] RIP: 0010:default_idle+0x42/0x60
[Sun Aug  7 13:12:29 2022] Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 0f b6 14 11 38 d0 7c 04 84 d2 75 14 8b 05 6b f1 22 02 85 c0 7e 07 0f 00 2d 80 3b 4a 00 fb f4 <c3> 48 c7 c7 e0 07 7e 85 e8 21 bd 40 fe eb de 66 66 2e 0f 1f 84 00
[Sun Aug  7 13:12:29 2022] RSP: 0018:ffffffff84407e18 EFLAGS: 00000242
[Sun Aug  7 13:12:29 2022] RAX: 0000000000000001 RBX: ffffffff84ec4a68 RCX: 1ffffffff0afc0fc
[Sun Aug  7 13:12:29 2022] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff835b1fac
[Sun Aug  7 13:12:29 2022] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff8884d2c44ac3
[Sun Aug  7 13:12:29 2022] R10: ffffed109a588958 R11: 00000000ffffffff R12: 0000000000000000
[Sun Aug  7 13:12:29 2022] R13: ffffffff84efac20 R14: 0000000000000000 R15: dffffc0000000000
[Sun Aug  7 13:12:29 2022]  ? default_idle_call+0xcc/0x460
[Sun Aug  7 13:12:29 2022]  default_idle_call+0xec/0x460
[Sun Aug  7 13:12:29 2022]  do_idle+0x394/0x450
[Sun Aug  7 13:12:29 2022]  ? arch_cpu_idle_exit+0x40/0x40
[Sun Aug  7 13:12:29 2022]  cpu_startup_entry+0x19/0x20
[Sun Aug  7 13:12:29 2022]  rest_init+0x156/0x250
[Sun Aug  7 13:12:29 2022]  arch_call_rest_init+0xf/0x15
[Sun Aug  7 13:12:29 2022]  start_kernel+0x3a7/0x3c5
[Sun Aug  7 13:12:29 2022]  secondary_startup_64_no_verify+0xcd/0xdb
[Sun Aug  7 13:12:29 2022]  </TASK>

Fixes: ff9b7521 ("net/mlx5: Bridge, support LAG")
Signed-off-by: default avatarVlad Buslov <vladbu@nvidia.com>
Reviewed-by: default avatarMark Bloch <mbloch@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      8e93f294
    • Eli Cohen's avatar
      net/mlx5: Eswitch, Fix forwarding decision to uplink · 942fca7e
      Eli Cohen authored 
      Make sure to modify the rule for uplink forwarding only for the case
where destination vport number is MLX5_VPORT_UPLINK.

Fixes: 94db3317 ("net/mlx5: Support multiport eswitch mode")
Signed-off-by: default avatarEli Cohen <elic@nvidia.com>
Reviewed-by: default avatarMaor Dickman <maord@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      942fca7e
    • Eli Cohen's avatar
      net/mlx5: LAG, fix logic over MLX5_LAG_FLAG_NDEVS_READY · a6e675a6
      Eli Cohen authored 
      Only set MLX5_LAG_FLAG_NDEVS_READY if both netdevices are registered.
Doing so guarantees that both ldev->pf[MLX5_LAG_P0].dev and
ldev->pf[MLX5_LAG_P1].dev have valid pointers when
MLX5_LAG_FLAG_NDEVS_READY is set.

The core issue is asymmetry in setting MLX5_LAG_FLAG_NDEVS_READY and
clearing it. Setting it is done wrongly when both
ldev->pf[MLX5_LAG_P0].dev and ldev->pf[MLX5_LAG_P1].dev are set;
clearing it is done right when either of ldev->pf[i].netdev is cleared.

Consider the following scenario:
1. PF0 loads and sets ldev->pf[MLX5_LAG_P0].dev to a valid pointer
2. PF1 loads and sets both ldev->pf[MLX5_LAG_P1].dev and
   ldev->pf[MLX5_LAG_P1].netdev with valid pointers. This results in
   MLX5_LAG_FLAG_NDEVS_READY is set.
3. PF0 is unloaded before setting dev->pf[MLX5_LAG_P0].netdev.
   MLX5_LAG_FLAG_NDEVS_READY remains set.

Further execution of mlx5_do_bond() will result in null pointer
dereference when calling mlx5_lag_is_multipath()

This patch fixes the following call trace actually encountered:

[ 1293.475195] BUG: kernel NULL pointer dereference, address: 00000000000009a8
[ 1293.478756] #PF: supervisor read access in kernel mode
[ 1293.481320] #PF: error_code(0x0000) - not-present page
[ 1293.483686] PGD 0 P4D 0
[ 1293.484434] Oops: 0000 [#1] SMP PTI
[ 1293.485377] CPU: 1 PID: 23690 Comm: kworker/u16:2 Not tainted 5.18.0-rc5_for_upstream_min_debug_2022_05_05_10_13 #1
[ 1293.488039] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 1293.490836] Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core]
[ 1293.492448] RIP: 0010:mlx5_lag_is_multipath+0x5/0x50 [mlx5_core]
[ 1293.494044] Code: e8 70 40 ff e0 48 8b 14 24 48 83 05 5c 1a 1b 00 01 e9 19 ff ff ff 48 83 05 47 1a 1b 00 01 eb d7 0f 1f 44 00 00 0f 1f 44 00 00 <48> 8b 87 a8 09 00 00 48 85 c0 74 26 48 83 05 a7 1b 1b 00 01 41 b8
[ 1293.498673] RSP: 0018:ffff88811b2fbe40 EFLAGS: 00010202
[ 1293.500152] RAX: ffff88818a94e1c0 RBX: ffff888165eca6c0 RCX: 0000000000000000
[ 1293.501841] RDX: 0000000000000001 RSI: ffff88818a94e1c0 RDI: 0000000000000000
[ 1293.503585] RBP: 0000000000000000 R08: ffff888119886740 R09: ffff888165eca73c
[ 1293.505286] R10: 0000000000000018 R11: 0000000000000018 R12: ffff88818a94e1c0
[ 1293.506979] R13: ffff888112729800 R14: 0000000000000000 R15: ffff888112729858
[ 1293.508753] FS:  0000000000000000(0000) GS:ffff88852cc40000(0000) knlGS:0000000000000000
[ 1293.510782] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1293.512265] CR2: 00000000000009a8 CR3: 00000001032d4002 CR4: 0000000000370ea0
[ 1293.514001] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1293.515806] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 8a66e458 ("net/mlx5: Change ownership model for lag")
Signed-off-by: default avatarEli Cohen <elic@nvidia.com>
Reviewed-by: default avatarMaor Dickman <maord@nvidia.com>
Reviewed-by: default avatarMark Bloch <mbloch@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      a6e675a6
    • Vlad Buslov's avatar
      net/mlx5e: Properly disable vlan strip on non-UL reps · f37044fd
      Vlad Buslov authored 
      When querying mlx5 non-uplink representors capabilities with ethtool
rx-vlan-offload is marked as "off [fixed]". However, it is actually always
enabled because mlx5e_params->vlan_strip_disable is 0 by default when
initializing struct mlx5e_params instance. Fix the issue by explicitly
setting the vlan_strip_disable to 'true' for non-uplink representors.

Fixes: cb67b832 ("net/mlx5e: Introduce SRIOV VF representors")
Signed-off-by: default avatarVlad Buslov <vladbu@nvidia.com>
Reviewed-by: default avatarRoi Dayan <roid@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      f37044fd
    • Duoming Zhou's avatar
      nfc: pn533: Fix use-after-free bugs caused by pn532_cmd_timeout · f1e941db
      Duoming Zhou authored 
      When the pn532 uart device is detaching, the pn532_uart_remove()
is called. But there are no functions in pn532_uart_remove() that
could delete the cmd_timeout timer, which will cause use-after-free
bugs. The process is shown below:

    (thread 1)                  |        (thread 2)
                                |  pn532_uart_send_frame
pn532_uart_remove               |    mod_timer(&pn532->cmd_timeout,...)
  ...                           |    (wait a time)
  kfree(pn532) //FREE           |    pn532_cmd_timeout
                                |      pn532_uart_send_frame
                                |        pn532->... //USE

This patch adds del_timer_sync() in pn532_uart_remove() in order to
prevent the use-after-free bugs. What's more, the pn53x_unregister_nfc()
is well synchronized, it sets nfc_dev->shutting_down to true and there
are no syscalls could restart the cmd_timeout timer.

Fixes: c656aa4c ("nfc: pn533: add UART phy driver")
Signed-off-by: default avatarDuoming Zhou <duoming@zju.edu.cn>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f1e941db
    • David S. Miller's avatar
      Merge branch 'r8152-fixes' · 6e10001c
      David S. Miller authored 
      Hayes Wang says:

====================
r8152: fix flow control settings

These patches fix the settings of RX FIFO about flow control.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6e10001c
    • Hayes Wang's avatar
      r8152: fix the RX FIFO settings when suspending · b75d6120
      Hayes Wang authored 
      The RX FIFO would be changed when suspending, so the related settings
have to be modified, too. Otherwise, the flow control would work
abnormally.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216333Reported-by: default avatarMark Blakeney <mark.blakeney@bullet-systems.net>
Fixes: cdf0b86b ("r8152: fix a WOL issue")
Signed-off-by: default avatarHayes Wang <hayeswang@realtek.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b75d6120
    • Hayes Wang's avatar
      r8152: fix the units of some registers for RTL8156A · 6dc4df12
      Hayes Wang authored 
      The units of PLA_RX_FIFO_FULL and PLA_RX_FIFO_EMPTY are 16 bytes.

Fixes: 195aae32 ("r8152: support new chips")
Signed-off-by: default avatarHayes Wang <hayeswang@realtek.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6dc4df12
    • Bernard Pidoux's avatar
      rose: check NULL rose_loopback_neigh->loopback · 3c53cd65
      Bernard Pidoux authored 
      Commit 3b3fd068 added NULL check for
`rose_loopback_neigh->dev` in rose_loopback_timer() but omitted to
check rose_loopback_neigh->loopback.

It thus prevents *all* rose connect.

The reason is that a special rose_neigh loopback has a NULL device.

/proc/net/rose_neigh illustrates it via rose_neigh_show() function :
[...]
seq_printf(seq, "%05d %-9s %-4s   %3d %3d  %3s     %3s %3lu %3lu",
	   rose_neigh->number,
	   (rose_neigh->loopback) ? "RSLOOP-0" : ax2asc(buf, &rose_neigh->callsign),
	   rose_neigh->dev ? rose_neigh->dev->name : "???",
	   rose_neigh->count,

/proc/net/rose_neigh displays special rose_loopback_neigh->loopback as
callsign RSLOOP-0:

addr  callsign  dev  count use mode restart  t0  tf digipeaters
00001 RSLOOP-0  ???      1   2  DCE     yes   0   0

By checking rose_loopback_neigh->loopback, rose_rx_call_request() is called
even in case rose_loopback_neigh->dev is NULL. This repairs rose connections.

Verification with rose client application FPAC:

FPAC-Node v 4.1.3 (built Aug  5 2022) for LINUX (help = h)
F6BVP-4 (Commands = ?) : u
Users - AX.25 Level 2 sessions :
Port   Callsign     Callsign  AX.25 state  ROSE state  NetRom status
axudp  F6BVP-5   -> F6BVP-9   Connected    Connected   ---------

Fixes: 3b3fd068 ("rose: Fix Null pointer dereference in rose_send_frame()")
Signed-off-by: default avatarBernard Pidoux <f6bvp@free.fr>
Suggested-by: default avatarFrancois Romieu <romieu@fr.zoreil.com>
Cc: Thomas DL9SAU Osterried <thomas@osterried.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3c53cd65
  3. 19 Aug, 2022 5 commits
    • Sabrina Dubroca's avatar
      Revert "net: macsec: update SCI upon MAC address change." · e82c649e
      Sabrina Dubroca authored 
      This reverts commit 6fc498bc.

Commit 6fc498bc states:

    SCI should be updated, because it contains MAC in its first 6
    octets.

That's not entirely correct. The SCI can be based on the MAC address,
but doesn't have to be. We can also use any 64-bit number as the
SCI. When the SCI based on the MAC address, it uses a 16-bit "port
number" provided by userspace, which commit 6fc498bc overwrites
with 1.

In addition, changing the SCI after macsec has been setup can just
confuse the receiver. If we configure the RXSC on the peer based on
the original SCI, we should keep the same SCI on TX.

When the macsec device is being managed by a userspace key negotiation
daemon such as wpa_supplicant, commit 6fc498bc would also
overwrite the SCI defined by userspace.

Fixes: 6fc498bc ("net: macsec: update SCI upon MAC address change.")
Signed-off-by: default avatarSabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/9b1a9d28327e7eb54550a92eebda45d25e54dd0d.1660667033.git.sd@queasysnail.netSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      e82c649e
    • Sean Anderson's avatar
      net: dpaa: Fix <1G ethernet on LS1046ARDB · 9dbdfd4a
      Sean Anderson authored 
      As discussed in commit 73a21fa8 ("dpaa_eth: support all modes with
rate adapting PHYs"), we must add a workaround for Aquantia phys with
in-tree support in order to keep 1G support working. Update this
workaround for the AQR113C phy found on revision C LS1046ARDB boards.

Fixes: 12cf1b89 ("net: phy: Add support for AQR113C EPHY")
Signed-off-by: default avatarSean Anderson <sean.anderson@seco.com>
Acked-by: default avatarCamelia Groza <camelia.groza@nxp.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220818164029.2063293-1-sean.anderson@seco.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      9dbdfd4a
    • Linus Torvalds's avatar
      Merge tag 'net-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 4c2d0b03
      Linus Torvalds authored 
      Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter.

  Current release - regressions:

   - tcp: fix cleanup and leaks in tcp_read_skb() (the new way BPF
     socket maps get data out of the TCP stack)

   - tls: rx: react to strparser initialization errors

   - netfilter: nf_tables: fix scheduling-while-atomic splat

   - net: fix suspicious RCU usage in bpf_sk_reuseport_detach()

  Current release - new code bugs:

   - mlxsw: ptp: fix a couple of races, static checker warnings and
     error handling

  Previous releases - regressions:

   - netfilter:
      - nf_tables: fix possible module reference underflow in error path
      - make conntrack helpers deal with BIG TCP (skbs > 64kB)
      - nfnetlink: re-enable conntrack expectation events

   - net: fix potential refcount leak in ndisc_router_discovery()

  Previous releases - always broken:

   - sched: cls_route: disallow handle of 0

   - neigh: fix possible local DoS due to net iface start/stop loop

   - rtnetlink: fix module refcount leak in rtnetlink_rcv_msg

   - sched: fix adding qlen to qcpu->backlog in gnet_stats_add_queue_cpu

   - virtio_net: fix endian-ness for RSS

   - dsa: mv88e6060: prevent crash on an unused port

   - fec: fix timer capture timing in `fec_ptp_enable_pps()`

   - ocelot: stats: fix races, integer wrapping and reading incorrect
     registers (the change of register definitions here accounts for
     bulk of the changed LoC in this PR)"

* tag 'net-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
  net: moxa: MAC address reading, generating, validity checking
  tcp: handle pure FIN case correctly
  tcp: refactor tcp_read_skb() a bit
  tcp: fix tcp_cleanup_rbuf() for tcp_read_skb()
  tcp: fix sock skb accounting in tcp_read_skb()
  igb: Add lock to avoid data race
  dt-bindings: Fix incorrect "the the" corrections
  net: genl: fix error path memory leak in policy dumping
  stmmac: intel: Add a missing clk_disable_unprepare() call in intel_eth_pci_remove()
  net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_xdp_run
  net/mlx5e: Allocate flow steering storage during uplink initialization
  net: mscc: ocelot: report ndo_get_stats64 from the wraparound-resistant ocelot->stats
  net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset
  net: mscc: ocelot: make struct ocelot_stat_layout array indexable
  net: mscc: ocelot: fix race between ndo_get_stats64 and ocelot_check_stats_work
  net: mscc: ocelot: turn stats_lock into a spinlock
  net: mscc: ocelot: fix address of SYS_COUNT_TX_AGING counter
  net: mscc: ocelot: fix incorrect ndo_get_stats64 packet counters
  net: dsa: felix: fix ethtool 256-511 and 512-1023 TX packet counters
  net: dsa: don't warn in dsa_port_set_state_now() when driver doesn't support it
  ...
      4c2d0b03
    • Linus Torvalds's avatar
      Merge tag 'linux-kselftest-next-6.0-rc2' of... · 90b6b686
      Linus Torvalds authored 
      Merge tag 'linux-kselftest-next-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fix from Shuah Khan:

 - fix landlock test build regression

* tag 'linux-kselftest-next-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/landlock: fix broken include of linux/landlock.h
      90b6b686
    • Linus Torvalds's avatar
      Merge tag 'trace-rtla-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace · 0de277d4
      Linus Torvalds authored 
      Pull rtla tool fixes from Steven Rostedt:
 "Fixes for the Real-Time Linux Analysis tooling:

   - Fix tracer name in comments and prints

   - Fix setting up symlinks

   - Allow extra flags to be set in build

   - Consolidate and show all necessary libraries not found in build
     error"

* tag 'trace-rtla-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  rtla: Consolidate and show all necessary libraries that failed for building
  tools/rtla: Build with EXTRA_{C,LD}FLAGS
  tools/rtla: Fix command symlinks
  rtla: Fix tracer name
      0de277d4
  5. 18 Aug, 2022 22 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7