- 12 Jan, 2021 12 commits
-
-
Jacopo Mondi authored
Rename __sensor_init() function to ov5647_set_mode() as the function is a regular one and the double underscores prefix shall be removed, and then move it to program the mode at s_stream(1) time, not at sensor power up. Break out from __sensor_init() the stream_off() operation call at sensor power up to coax the lanes in LP-11 state. Signed-off-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Jacopo Mondi authored
The ov5647_read()/ov5647_write() return in case of success the number of bytes read or written respectively. This requires callers to check if the return value is less than zero to detect an error. Unfortunately, in several places, callers directly return the result of a read/write call, causing issues when the returned valued is checked to be different from zero to detect an error. Fix this by returning zero if i2c_master_send() and i2c_master_read() return a positive value (the number of bytes written or read). Signed-off-by:
-
Jacopo Mondi authored
Replace the boilerplate license text with the SPDX identifier. Signed-off-by:
-
Jacopo Mondi authored
The driver has some obvious style issues which are worth fixing before expanding the driver capabilities. Fix: - Variable declaration order - Function parameters alignment - Multi-line comments and spurious line breaks - Use lowercase for hexadecimal values - > 80 cols lines Cosmetic change, no functional changes intended. Signed-off-by:
-
Jacopo Mondi authored
The driver currently support a single format. Fix its initialization to use the only supported resolution. Signed-off-by:
-
Dave Stevenson authored
There's no way to query the subdevice for the supported resolutions. Add set_fmt and get_fmt implementations. Since there's only one format supported set_fmt does nothing and get returns single format. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by:
Roman Kovalivskyi <roman.kovalivskyi@globallogic.com> Signed-off-by:
-
Dave Stevenson authored
Add support for optional non-continuous clock mode to the ov5647 sensor driver. Non-continuous clock saves a small amount of power and on some SoCs is easier to interface with. Signed-off-by:
-
Dave Stevenson authored
Add support for an optional GPIO connected to PWDN on the sensor. This allows the use of hardware standby mode where internal device clock and circuit activities are halted. Please note that power is off when PWDN is high. Signed-off-by:
-
Jacopo Mondi authored
Rename 'ov5647.yaml' as 'ovti,ov5647.yaml' and update the MAINTAINERS file entry accordingly. Signed-off-by:
-
Hans Verkuil authored
These two functions did not take the imx219->mutex lock, but imx219_get_format_code checks that a lock is taken, so it issues a warning: [ 8.738717] WARNING: CPU: 2 PID: 60 at drivers/media/i2c/imx219.c:653 imx219_get_format_code+0xac/0xc0 [ 8.748113] Modules linked in: [ 8.751214] CPU: 2 PID: 60 Comm: kworker/2:1 Tainted: G W 5.8.0-rc1-arm64 #148 [ 8.759821] Hardware name: NVIDIA Jetson TX1 Developer Kit (DT) [ 8.765806] Workqueue: events deferred_probe_work_func [ 8.771003] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) [ 8.776635] pc : imx219_get_format_code+0xac/0xc0 [ 8.781390] lr : imx219_get_format_code+0xa8/0xc0 [ 8.786143] sp : ffff800012a538f0 [ 8.789495] x29: ffff800012a538f0 x28: ffff800012838e90 [ 8.794867] x27: ffff0000f28c5800 x26: ffff800011161c68 [ 8.800237] x25: ffff0000f2a5a3f8 x24: 0000000000000018 [ 8.805605] x23: ffff0000f284ef18 x22: ffff0000f2a5a080 [ 8.810974] x21: ffff0000f284ff00 x20: ffff0000f2a5a080 [ 8.816343] x19: 000000000000300f x18: 00000000ffffffff [ 8.821712] x17: ffff800011c77268 x16: 00000000000040d7 [ 8.827081] x15: 00000000000040d8 x14: 0000000000000000 [ 8.832451] x13: 00000000000040d4 x12: ffff800011d19300 [ 8.837819] x11: 00000000000208c0 x10: 0000000000000004 [ 8.843188] x9 : 000000003baa2ecd x8 : 000000008b3f9c73 [ 8.848558] x7 : 0000000000000008 x6 : 0000000000000034 [ 8.853929] x5 : 0000000000000000 x4 : 0000000000000001 [ 8.859297] x3 : ffff800010a2a8a8 x2 : ffff0000f84a8000 [ 8.864666] x1 : 0000000000000000 x0 : 0000000000000000 [ 8.870034] Call trace: [ 8.872515] imx219_get_format_code+0xac/0xc0 [ 8.876921] imx219_enum_mbus_code+0x38/0x60 [ 8.881241] call_enum_mbus_code+0x50/0x70 [ 8.885387] tegra_vi_graph_notify_complete+0x290/0x5e8 [ 8.890670] v4l2_async_notifier_try_complete.part.0+0x48/0x68 [ 8.896563] v4l2_async_register_subdev+0x100/0x1c0 [ 8.901497] v4l2_async_register_subdev_sensor_common+0x70/0xf0 [ 8.907477] imx219_probe+0x590/0x728 [ 8.911184] i2c_device_probe+0xe4/0x2b0 [ 8.915151] really_probe+0xd8/0x330 [ 8.918768] driver_probe_device+0x58/0xb8 [ 8.922909] __device_attach_driver+0x84/0xc8 [ 8.927315] bus_for_each_drv+0x78/0xc8 [ 8.931193] __device_attach+0xe4/0x140 [ 8.935072] device_initial_probe+0x14/0x20 [ 8.939301] bus_probe_device+0x9c/0xa8 [ 8.943179] deferred_probe_work_func+0x74/0xb0 [ 8.947759] process_one_work+0x2c4/0x740 [ 8.951813] worker_thread+0x4c/0x430 [ 8.955518] kthread+0x158/0x178 [ 8.958786] ret_from_fork+0x10/0x1c [ 8.962401] irq event stamp: 63536 [ 8.965846] hardirqs last enabled at (63535): [<ffff800010082398>] el1_irq+0xd8/0x180 [ 8.973846] hardirqs last disabled at (63536): [<ffff8000100a6484>] do_debug_exception+0x16c/0x258 [ 8.982895] softirqs last enabled at (63534): [<ffff800010080d4c>] _stext+0x54c/0x594 [ 8.990896] softirqs last disabled at (63525): [<ffff8000100c8350>] irq_exit+0x100/0x138 [ 8.999066] ---[ end trace ebfbcd84b75ef921 ]--- [ 9.004354] ------------[ cut here ]------------ Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by:
-
Sakari Ailus authored
The link_validate pad op will only be called on sink pads. Document this. Signed-off-by:
-
Sakari Ailus authored
We no longer have format related callbacks in video ops. Remove the reference to them. Signed-off-by:
-
- 04 Jan, 2021 28 commits
-
-
Michael Tretter authored
The dst_handle field in the PUT_STREAM_BUFFER and ENCODE_FRAME_RESPONSE is used to retrieve the V4L2 CAPTURE buffer. Calling it stream_id is confusing. Call it dst_handle inspired by src_handle for the OUTPUT buffer. Signed-off-by:
Michael Tretter <m.tretter@pengutronix.de> Signed-off-by:
-
Michael Tretter authored
The v4l2-m2m has various helpers for correctly handle the draining. Drop the driver specific state machine and use the m2m helper functions. Signed-off-by:
-
Michael Tretter authored
Convert the Allegro DVT video IP codec text binding to Yaml. Add the converted binding to the MAINTAINERS file. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Michael Tretter authored
The stateful encoder API was finalized. Nothing is blocking the driver from being moved out of staging. Signed-off-by:
-
Dan Carpenter authored
The "channel" is added to the "dev->channels" but then if v4l2_m2m_ctx_init() fails then we free "channel" but it's still on the list so it could lead to a use after free. Let's not add it to the list until after v4l2_m2m_ctx_init() succeeds. Fixes: cc62c747 ("media: allegro: add missed checks in allegro_open()") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Hans Verkuil authored
If the CEC device was unregistered, then add EPOLLPRI to the poll() mask. Otherwise a select() that only waits for exceptions will not wake up. A select() that waits for read and/or write events *will* wake up on an EPOLLERR, but not (for some reason) if it just waits for exceptions. Strangly the epoll functionality will wakeup on EPOLLERR if you just wait for an exception, so in this respect select() and epoll differ. In the end it doesn't really matter, what matters is that polling file handles are woken up on device unregistration. Signed-off-by:
-
Hans Verkuil authored
If the V4L2 device was unregistered, then add EPOLLPRI to the poll mask. Otherwise a select() that only waits for exceptions will not wake up. A select() that waits for read and/or write events *will* wake up on an EPOLLERR, but not (for some reason) if it just waits for exceptions. Strangly the epoll functionality will wakeup on EPOLLERR if you just wait for an exception, so in this respect select() and epoll differ. In the end it doesn't really matter, what matters is that polling file handles are woken up on device unregistration. It also improves the code a bit if vdev->fops->poll is NULL: this didn't check for device unregistration. Signed-off-by:
-
Hans Verkuil authored
When the disconnect error injection control is set, then besides faking unregistering the device nodes, also call v4l2_event_wake_all() to ensure any userspace applications will wake up as per a 'normal' unregister. Signed-off-by:
-
Hans Verkuil authored
When unregistering a V4L2 device node, make sure any filehandles that are waiting for an event are woken up. Add v4l2_event_wake_all() to v4l2-event.c and call it from video_unregister_device(). Otherwise userspace might never know that a device node was removed. [hverkuil: checkpatch: replaced 'if (vdev == NULL)' by 'if (!vdev)'] Signed-off-by:
-
Alexandre Courbot authored
do_poll()/do_select() seem to set the _qproc member of poll_table to NULL the first time they are called on a given table, making subsequent calls of poll_wait() on that table no-ops. This is a problem for mem2mem which calls poll_wait() on the V4L2 queues' waitqueues only when a queue-related event is requested, which may not necessarily be the case during the first poll. For instance, a stateful decoder is typically only interested in EPOLLPRI events when it starts, and will switch to listening to both EPOLLPRI and EPOLLIN after receiving the initial resolution change event and configuring the CAPTURE queue. However by the time that switch happens and v4l2_m2m_poll_for_data() is called for the first time, poll_wait() has become a no-op and the V4L2 queues waitqueues thus cannot be registered. Fix this by moving the registration to v4l2_m2m_poll() and do it whether or not one of the queue-related events are requested. Signed-off-by:
Alexandre Courbot <gnurou@gmail.com> Signed-off-by:
-
Alexandre Courbot authored
do_poll()/do_select() seem to set the _qproc member of poll_table to NULL the first time they are called on a given table, making subsequent calls of poll_wait() on that table no-ops. This is a problem for vb2 which calls poll_wait() on the V4L2 queues' waitqueues only when a queue-related event is requested, which may not necessarily be the case during the first poll. Fix this by making the call to poll_wait() happen first thing and unconditionally in vb2_core_poll(). Signed-off-by:
-
Sowjanya Komatineni authored
This patch adds custom V4L2 control for syncpt timeout retry to continue capture on error for specified retries count through this control. This is useful for HDMI-to-CSI bridge debug purposes like for hotplug scenarios or for ignoring captures till HDMI input is stabilized. Signed-off-by:
Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by:
-
Sowjanya Komatineni authored
Tegra VI/CSI hardware don't have native 8 lane capture support. Each CSI port has max 4 lanes only. So for x8 captures, consecutive ports are ganged up for left half and right half captures on to each x4 ports with buffer offsets based on source image split width to align side-by-side. All ports in gang are configured together during the corresponding video device node streaming for x8 captures. x8 capture with gang ports are supported with HDMI-to-CSI bridges where they split 4K image into left half onto one x4 port and right half onto second x4 port. Signed-off-by:
-
Sowjanya Komatineni authored
Tegra VI/CSI hardware don't have native 8 lane CSI RX port. But x8 capture can be supported by using consecutive x4 ports simultaneously with HDMI-to-CSI bridges where source image is split on to two x4 ports. This patch updates dt-bindings for csi endpoint data-lane property with maximum of 8 lanes. Acked-by:
-
Sowjanya Komatineni authored
Some CSI2 receivers support 8 data lanes. So, this patch updates CSI2 maximum data lanes to be 8. Acked-by:
-
Sowjanya Komatineni authored
Implement V4L2 device notify callback to handle V4L2_EVENT_SOURCE_CHANGE event from subdevices. HDMI-to-CSI bridge drivers trigger V4L2_EVENT_SOURCE_CHANGE when source DV timing changes are detected or when HDMI hotplug happens. Runtime source parameter changes during active streaming is not allowed and Tegra video driver calls vb2_queue_error to signal a fatal error if a notification of this event happens during an active streaming. Signed-off-by:
-
Sowjanya Komatineni authored
Current implementation uses v4l2_ctrl_subscribe_event() and this does not handle V4L2_EVENT_SOURCE_CHANGE. So, update driver to handle V4L2_EVENT_SOURCE_CHANGE. Signed-off-by:
-
Sowjanya Komatineni authored
This patch adds support for log_status ioctl. Signed-off-by:
-
Sowjanya Komatineni authored
This patch adds support for EDID get and set v4l2 ioctl ops to use with HDMI to CSI bridges. Signed-off-by:
-
Sowjanya Komatineni authored
This patch adds below v4l2 DV timing ioctls to support HDMI-to-CSI bridges. Signed-off-by:
-
Sowjanya Komatineni authored
NV16 are two-plane versions of YUV422 format. VI/CSI surface0 registers corresponds to first Y plane and surface1 registers corresponds to seconds UV plane. This patch updates image size for NV16 format to include both planes and programs VI/CSI surface1 registers for UV plane capture. Signed-off-by:
-
Sowjanya Komatineni authored
V4L2 pixel format is incorrect for RGB and YUV formats. This patch fixes it. Signed-off-by:
-
Sowjanya Komatineni authored
VI Pixel transforms converts source pixel data to selected destination pixel formats in memory and aligns properly. YUV and RGB formats need this pixel transform to be enabled. RAW formats use T_R16_I destination pixel format in memory and does not need pixel transform as they support direct write to memory. So, this patch enables pixel transform for YUV and RGB and keeps it bypass for RAW formats. Signed-off-by:
-
Sowjanya Komatineni authored
Currently try format implementation doesn't check if subdevice has get_selection ops implemented and returns -EINVAL on error from direct v4l2_subdev_call of get_selection. Selection API's are not mandatory for all V4L2 subdevices. This patch fixes it by adding v4l2_subdev_has_ops check prior to calling get_selection ops and continues with try or set format with zero crop settings for subdevices that don't have get_selection and returns -EINVAL only for subdevices that has get_selection ops. Signed-off-by:
-
Laurent Pinchart authored
Rework the context API exposed to cal-video.c to simplify it. The configuration and enable steps are all grouped in a single cal_ctx_start() function, and the DMA stop and IRQ disable are similarly groupd in cal_ctx_stop(). The cal_ctx_wr_dma_addr() function is renamed to cal_ctx_set_dma_addr() for consistency with the cal_ctx_ prefix of the start and stop functions. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Benoit Parrot <bparrot@ti.com> Signed-off-by:
-
Laurent Pinchart authored
dma_addr_t is the correct type to store DMA addresses. Replace incorrect usage of unsigned long and unsigned int. Signed-off-by:
-
Laurent Pinchart authored
When a pending buffer becomes active, the cal_dmaqueue.active field is updated, but the pending field keeps the same value until a new buffer becomes pending. This requires handling the special case of pending == active in different places. Simplify the code by setting the pending field to NULL when the pending buffer becomes active. Buffers are now simply moved from queue to pending and from pending to active. Signed-off-by:
-
Laurent Pinchart authored
The cal_dmaqueue structure only contains the list of queued buffers. Move the other fields that are logically related to the DMA queue (current and next buffer points, state, wait queue and lock) from cal_ctx to cal_dmaqueue. Take this as an opportunity to document the fields usage and to give them more appropriate names. The 'active' field stored the list of all queued buffers, not the active buffers, so rename it to 'queue'. The 'cur_frm' and 'next_frm' are respectively renamed to 'active' and 'pending' to better explain their purpose. The 'dma_state' and 'dma_wait' fields are stripped of their 'dma_' prefix as they're now part of cal_dmaqueue. Finally, 'slock' is renamed to 'lock'. Signed-off-by:
-
