- 30 May, 2012 4 commits
-
-
Tej Parkash authored
change_queue_depth will adjust device queuedepth upon receiving "SAM_STAT_TASK_SET_FULL" scsi status from the target. Also added ql4xqfulltracking command line param to enable or disable queuefull tracking. One can disabling queuefull tracking to ensure user set scsi device queuedepth is not altered. Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Manish Rangankar authored
Allow ddb state to change to DDB_DS_NO_CONNECTION_ACTIVE or DDB_DS_SESSION_FAILED before issuing clear ddb mailbox cmd, because clear ddb mailbox cmd fails if the ddb state is not equal to DDB_DS_NO_CONNECTION_ACTIVE or DDB_DS_SESSION_FAILED. Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Manish Rangankar authored
Update the session and connection parameter before sending connection logged in event to iscsiadm because in some scenario logout may come in just after we send the logged in event to user, which free up session, connection and ddb, but DPC is still updating session and connect parameter which can lead to panic. Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Lalit Chandivade authored
Check for Firmware Hang (AF_FW_RECOVERY) after mailbox command has gained access to ensure that the mailbox command does not wait un-necessarily during a firmware recovery and prevent premature mailbox timeout which will lead to back to back reset's. Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
- 23 May, 2012 6 commits
-
-
Robert Love authored
This patch has the SW FCoE driver and the bnx2fc driver make use of the new fcoe_sysfs API added earlier in this patch series. After this patch a fcoe_ctlr_device is allocated with private data in this order. +------------------+ +------------------+ | fcoe_ctlr_device | | fcoe_ctlr_device | +------------------+ +------------------+ | fcoe_ctlr | | fcoe_ctlr | +------------------+ +------------------+ | fcoe_interface | | bnx2fc_interface | +------------------+ +------------------+ libfcoe also takes part in this new model since it discovers and manages fcoe_fcf instances. The memory allocation is different for FCFs. I didn't want to impact libfcoe's fcoe_fcf processing, so this patch creates fcoe_fcf_device instances for each discovered fcoe_fcf. The two are paired using a (void * priv) member of the fcoe_ctlr_device. This allows libfcoe to continue maintaining its list of fcoe_fcf instances and simply attaches and detaches them from existing or new fcoe_fcf_device instances. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Robert Love authored
This patch adds a 'fcoe bus' infrastructure to the kernel that is driven by changes to libfcoe which allow LLDs to present FIP (FCoE Initialization Protocol) discovered entities and their attributes to user space via sysfs. This patch adds the following APIs- fcoe_ctlr_device_add fcoe_ctlr_device_delete fcoe_fcf_device_add fcoe_fcf_device_delete They allow the LLD to expose the FCoE ENode Controller and any discovered FCFs (Fibre Channel Forwarders, e.g. FCoE switches) to the user. Each of these new devices has their own bus_type so that they are grouped together for easy lookup from a user space application. Each new class has an attribute_group to expose attributes for any created instances. The attributes are- fcoe_ctlr_device * fcf_dev_loss_tmo * lesb_link_fail * lesb_vlink_fail * lesb_miss_fka * lesb_symb_err * lesb_err_block * lesb_fcs_error fcoe_fcf_device * fabric_name * switch_name * priority * selected * fc_map * vfid * mac * fka_peroid * fabric_state * dev_loss_tmo A device loss infrastructre similar to the FC Transport's is also added by this patch. It is nice to have so that a link flapping adapter doesn't continually advance the count used to identify the discovered FCF. FCFs will exist in a "Disconnected" state until either the timer expires or the FCF is rediscovered and becomes "Connected." This patch generates a few checkpatch.pl WARNINGS that I'm not sure what to do about. They're macros modeled around the FC Transport attribute building macros, which have the same 'feature' where the caller can ommit a cast in the argument list and no cast occurs in the code. I'm not sure how to keep the code condensed while keeping the macros. Any advice would be appreciated. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Robert Love authored
Currently the fcoe_ctlr associated with an interface is allocated as a member of struct bnx2fc_interface. This causes problems when when later patches attempt to use the new fcoe_sysfs APIs which allow us to allocate the bnx2fc_interface as private data to a fcoe_ctlr_device instance. The problem is that libfcoe wants to be able use pointer math to find a fcoe_ctlr's fcoe_ctlr_device as well as finding a fcoe_ctlr_device's assocated fcoe_ctlr. To do this we need to allocate the fcoe_ctlr_device, with private data for the LLD. The private data will contain the fcoe_ctlr and its private data will be the bnx2fc_interface. +-------------------+ | fcoe_ctlr_device | +-------------------+ | fcoe_ctlr | +-------------------+ | bnx2fc_interface | +-------------------+ This prep work will allow us to go from a fcoe_ctlr_device instance to its fcoe_ctlr as well as from a fcoe_ctlr to its fcoe_ctlr_device once the fcoe_sysfs API is in use (later patches in this series). Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Robert Love authored
Currently the fcoe_ctlr associated with an interface is allocated as a member of struct fcoe_interface. This causes problems when attempting to use the new fcoe_sysfs APIs which allow us to allocate the fcoe_interface as private data to the fcoe_ctlr_device instance. The problem is that libfcoe wants to be able use pointer math to find a fcoe_ctlr's fcoe_ctlr_device as well as finding a fcoe_ctlr_device's assocated fcoe_ctlr. To do this we need to allocate the fcoe_ctlr_device, with private data for the LLD. The private data contains the fcoe_ctlr and its private data is the fcoe_interface. This patch only allocates the fcoe_interface with the fcoe_ctlr, the fcoe_ctlr_device will be added in a later patch, which will complete the below diagram- +------------------+ | fcoe_ctlr_device | +------------------+ | fcoe_ctlr | +------------------+ | fcoe_interface | +------------------+ This prep work will allow us to go from a fcoe_ctlr_device instance to its fcoe_ctlr as well as from a fcoe_ctlr to its fcoe_ctlr_device once the fcoe_sysfs API is in use (later patches in this series). Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Jun'ichi Nomura authored
block congestion control doesn't have any concept of fairness across multiple queues. This means that if SCSI reports the host as busy in the queue congestion control it can result in an unfair starvation situation in dm-mp if there are multiple multipath devices on the same host. For example: http://www.redhat.com/archives/dm-devel/2012-May/msg00123.html The fix for this is to report only the sdev busy state (and ignore the host busy state) in the block congestion control call back. The host is still congested, but the SCSI subsystem will sort out the congestion in a fair way because it knows the relation between the queues and the host. [jejb: fixed up trailing whitespace] Reported-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de> Tested-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Namjae Jeon authored
Avoid dereferencing a NULL pointer if scsi_host_alloc is failed. Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
- 22 May, 2012 30 commits
-
-
Dan Carpenter authored
In the original code, if dma_pool_alloc() fails then we call dma_pool_free(). It causes an error, possibly a NULL dereference. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Carpenter authored
We introduced a new return here and forgot to unlock the mutex. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: "Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Nicholas Bellinger authored
This patch adds support for tcm_qla2xxx fabric module for target-core using the new qla_target.c LLD logic. This includes support for explict NodeACLs via configfs using tcm_qla2xxx_setup_nacl_from_rport() from libfc struct fc_host->rports, and demo-mode support for virtual LUN=0 access. This patch also adds support for using tcm_qla2xxx_lport->lport_fcport_map and ->lport_loopid_map of btree_head32 to track struct se_node_acl pointers for individual 24-bit Port ID and 16-bit Loop ID values w/ qla_target_template ->find_sess_by_s_id() and ->find_sess_by_loop_id() used in a number of locations into the primary I/O dispatch logic in qla_target.c LLD code. The main piece for FC Nexus setup is in tcm_qla2xxx_check_initiator_node_acl(), which calls tcm_qla2xxx_set_sess_by_[s_id,loop_id]() to setup our lport->lport_fcport_map and lport_loopid_map pointers respectively, and register the new nexus with TCM via __transport_register_session(). (nab: Add qla_tgt_mgmt_cmd usage with TARGET_SCF_ACK_KREF during TMRs + change tcm_qla2xxx_nacl->nport_id to u32 (DanC)) (danc: tcm_qla2xxx: checking for NULL instead of IS_ERR()) (roland: Fix up v3.5 breakage for removal of transport_do_task_sg_chain + Add hook so qla_target code can shutdown sessions) (steveh: Convert FC address map from flat array to btree) (randy: fix qla2xxx printk format warnings for size_t) (joern: Make most of tcm_qla2xxx static + remove unnecessary workqueue_struct prototypes + use WWN_SIZE instead of hard-coded constants) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Nicholas Bellinger authored
Add LLD target mode for >= 24xx series HW. This code was originally based on external qla2x00t module based on 8.02.01-k4, and has been refactored to push the bulk of code into mainline qla2xxx.ko LLD -> qla_target.c. The implementation uses internal workqueues for I/O context submission into tcm_qla2xxx code, and includes the struct qla_tgt_func_tmpl API for external interaction to allow qla2xxx LDD to function without direct target-core dependencies: It also enables qla_target.c usage within existing qla2xxx LLD code. This includes: *) Addition of target mode specific members to existing data structures in qla_def.h and struct qla_hw_data->tgt_ops using qla_target.h:struct qla_tgt_func_tmpl *) Addition of struct qla_tgt_func_tmpl and direct calls into qla_target.c logic w/ qlt_* prefixed functions. *) Addition of qla_iocb.c:qla2x00_req_pkt() for ring processing, and qla2x00_issue_marker() for handling request/response queue processing for target mode operation *) Addition of various qla_tgt_mode_enabled() logic checks in qla24xx_nvram_config(), qla2x00_initialize_adapter(), qla2x00_rff_id(), qla2x00_abort_isp(), qla24xx_modify_vp_config(), and qla2x00_vp_abort_isp(). By default the new qlini_mode module parameter is setting initiator-mode to 'enabled' in order for 'modprobe qla2xxx' to continue to function as expected in initiator only mode. Enabling target-mode operation will currently require a: modprobe qla2xxx qlini_mode="disabled" in order to explictly disabled initiator mode and allow target-mode to be enabled via tcm_qla2xxx configfs fabric callers. (nab: Convert to qlini_mode='enabled' by default in qla_target.c) (joern: Remove loop_id from qla_tgt_make_local_sess() arguments + Remove unused s_id + fix s_id endianness bug + simplify qla_tgt_abort_work) (gerard: fix section __exit mismatch in qla_tgt_exit) (arun: Capture ATIO queue during firmware dump + Send SCR in target mode + Target mode review comments) (roland: Don't create duplicate target sessions to address tearing down ACLs with IO in flight + Add missing call to qlt_fc_port_deleted call during qla2x00_schedule_rport_del timeout) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Chad Dupuis authored
commit 491118df Author: Saurav Kashyap <saurav.kashyap@qlogic.com> Date: Tue Aug 16 11:31:50 2011 -0700 [SCSI] qla2xxx: During loopdown perform Diagnostic loopback. The LOOP_DOWN test is not needed. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Giridhar Malavali authored
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Giridhar Malavali authored
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Joe Carnuccio authored
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Chad Dupuis authored
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Saurav Kashyap authored
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Joe Carnuccio authored
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Joe Carnuccio authored
The field vp_idx in struct fc_port is a redundant/mirror copy of the same field in struct scsi_qla_host; struct fc_port has a pointer vha to scsi_qla_host which allows the original copy of vp_idx to be readily accessed. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Nigel Kirkland authored
Signed-off-by: Nigel Kirkland <nigel.kirkland@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Giridhar Malavali authored
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Andrew Vasquez authored
Both the target-id and LUN are munged in the original printk(). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Saurav Kashyap authored
Currently stats is part of ha data structure, common for physical and virtual ports. Moved the stats to vha, each port will have its own stat. Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Saurav Kashyap authored
Add an extra layer of logging granularity for messages that are necessary in some circumstances but may flood the kernel log buffer with too many messages otherwise. Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Chad Dupuis authored
If interrupt registration failed we could crash the machine as we were trying to deference some pointers which weren't allocated yet. Move the allocation a little earlier and make some checks to the free resource code to make sure that we don't try to free a resource that was never allocated. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Chad Dupuis authored
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Giridhar Malavali authored
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Chad Dupuis authored
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Masanari Iida authored
Correct spelling "occured" to "occurred" in drivers/scsi/qla2xxx/qla_mbx.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Chetan Loke authored
Optimized queuecommand handler's to eliminate double head-room checks. The checks are moved inside the 1st if-loop otherwise you would end up checking twice when there is enough head room. Signed-off-by: Chetan Loke <loke.chetan@gmail.com> Reviewed-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Reviewed-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Raul Porcel authored
Replace "Inconisistent" with "Inconsistent" in drivers/scsi/qla2xxx/qla_init.c Signed-off-by: Raul Porcel <armin76@gentoo.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Aaron Lu authored
For scsi devices which use scsi bus runtime callback, runtime suspend will call scsi_dev_type_suspend, and if the drv->suspend failed, the device will still be in active state. But since scsi_device_quiesce is called, the device will not be able to respond any more commands. So add a check here to see if err occured, if so, bring the device back to normal state with scsi_device_resume. Signed-off-by: Aaron Lu <aaron.lu@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Krishna Gudipati authored
Made changes to set the fc_host sysfs entries supported_speeds, supported_classes etc., during the vport creation from the FC transport template. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
When the task management IO times out, or a flush operation is performed while task management IO is pending, driver is not cleaning up the IO. This patch cleans up the IO for the above cases. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
When IO abort times out during eh_abort or a flush operation is performed while abort is pending, the driver is not cleaning up the IO and thus not reducing the IO reference count. With this change, as part of explicit logout, the IO is cleaned up. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
Commit 907c07d4 added more cases to do FLOGI retry on receiving bad response. Remove the code that drops the packet and allow the stack to handle bad FLOGI response. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-