- 21 Jul, 2021 5 commits
-
-
Martin K. Petersen authored
It is useful for testing purposes to be able to inject errors by writing bad protection information to media with checking disabled and then attempting to read it back. Extend scsi_debug's PI verification logic to give the driver feature parity with commercially available drives. Almost all devices with PI capability support RDPROTECT and WRPROTECT values of 0, 1, and 3. Link: https://lore.kernel.org/r/20210609033929.3815-10-martin.petersen@oracle.comReviewed-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Message-Id: <20210609033929.3815-10-martin.petersen@oracle.com>
-
Martin K. Petersen authored
The function used to dump sectors containing protection information errors was useful during initial development over a decade ago. However, dump_sector() substantially slows down the system during testing due to writing an entire sector's worth of data to syslog on every error. We now log plenty of information about the nature of detected protection information errors throughout the stack. Dumping the entire contents of an offending sector is no longer needed. Link: https://lore.kernel.org/r/20210609033929.3815-9-martin.petersen@oracle.comReviewed-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
-
Martin K. Petersen authored
Use scsi_prot_ref_tag() and scsi_prot_interval() instead scsi_get_lba() and sector_size. Link: https://lore.kernel.org/r/20210609033929.3815-7-martin.petersen@oracle.comReviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
-
Martin K. Petersen authored
Use the SCSI midlayer interfaces to query protection interval, reference tag, and per-command DIX flags. Link: https://lore.kernel.org/r/20210609033929.3815-4-martin.petersen@oracle.comReviewed-by:
Arun Easi <aeasi@marvell.com> Signed-off-by:
-
Martin K. Petersen authored
We are about to remove the request pointer from struct scsi_cmnd and that will complicate getting to the ref_tag via t10_pi_ref_tag() in the various drivers. Introduce a helper function to retrieve the reference tag so drivers will not have to worry about the details. Link: https://lore.kernel.org/r/20210609033929.3815-2-martin.petersen@oracle.comReviewed-by:
-
- 20 Jul, 2021 9 commits
-
-
Don Brace authored
Link: https://lore.kernel.org/r/20210714182847.50360-10-don.brace@microchip.comReviewed-by:
Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by:
Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by:
Scott Benesh <scott.benesh@microchip.com> Reviewed-by:
Scott Teel <scott.teel@microchip.com> Reviewed-by:
Gerry Morong <gerry.morong@microchip.com> Signed-off-by:
Don Brace <don.brace@microchip.com> Signed-off-by:
-
Mike McGowen authored
Correct driver's ISR accessing a data structure member that has not been fully initialized during driver initialization. The pqi queue groups can have uninitialized members when an interrupt fires. This has not resulted in any driver crashes. This was found during our own internal testing. No bugs were ever filed. Link: https://lore.kernel.org/r/20210714182847.50360-9-don.brace@microchip.comReviewed-by:
-
Balsundar P authored
Add support for ZTE RM241-18i 2G device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_5445 Add support for ZTE RM242-18i 4G device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_5446 Add support for ZTE RM243-18i device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_5447 Add support for ZTE SDPSA/B-18i 4G device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_0B27 Add support for ZTE SDPSA/B_I-18i device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_0B29 Add support for ZTE SDPSA/B_L-18i 2G device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_0B45 Link: https://lore.kernel.org/r/20210714182847.50360-8-don.brace@microchip.comReviewed-by:Balsundar P <balsundar.p@microchip.com> Signed-off-by:
-
Mike McGowen authored
Add support for Norsi ntcom Raid-24i controller: VID_0x9005, DID_0x028f, SVID_0x1dfc, SDID_0x3161 Link: https://lore.kernel.org/r/20210714182847.50360-7-don.brace@microchip.comReviewed-by: -
Murthy Bhat authored
Report on SCSI command that has triggered the reset. Also add check for NULL SCSI commands resulting from issuing sg_reset when there is no outstanding commands. Example: sg_reset -d /dev/sgXY smartpqi 0000:39:00.0: resetting scsi 4:0:1:0 due to cmd 0x12 Link: https://lore.kernel.org/r/20210714182847.50360-6-don.brace@microchip.comReviewed-by:
Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by:
-
Don Brace authored
Change Microsemi to Microchip. Link: https://lore.kernel.org/r/20210714182847.50360-5-don.brace@microchip.comReviewed-by:
Justin Lindley <Justin.lindley@microchip.com> Signed-off-by:
-
Don Brace authored
Change driver module macros to reflect copyright changes: Microsemi to Microchip. Link: https://lore.kernel.org/r/20210714182847.50360-4-don.brace@microchip.comReviewed-by:
-
Kevin Barnett authored
Updated copyright notices and company name strings to reflect Microchip ownership. Link: https://lore.kernel.org/r/20210714182847.50360-3-don.brace@microchip.comReviewed-by:
-
Mahesh Rajashekhara authored
Add support for H3C P4408-Ma-8i-2GB device ID: VID_9005, DID_028F, SVID_193D and SDID_1108 VID_9005, DID_028F, SVID_193D and SDID_1109 Link: https://lore.kernel.org/r/20210714182847.50360-2-don.brace@microchip.comReviewed-by:Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Signed-off-by:
-
- 19 Jul, 2021 23 commits
-
-
James Smart authored
Update copyrights for files modified by the 12.8.0.11 patch set. Link: https://lore.kernel.org/r/20210707184351.67872-21-jsmart2021@gmail.comCo-developed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
James Smart authored
Update lpfc version to 12.8.0.11. Link: https://lore.kernel.org/r/20210707184351.67872-20-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
When a node moves to NPR state due to a device recovery event, the nlp_fc4_types in the node are cleared. An ADISC received for a node in the NPR state triggers an ADISC. Without fc4 types being known, the calls to register with the transport are no-op'd, thus no additional references are placed on the node by transport re-registrations. A subsequent RSCN could trigger another unregister request, which will decrement the reference counts, leading to the ref count hitting zero and the node being freed while futher discovery on the node is being attempted by the RSCN event handling. Fix by skipping the trigger of an ADISC when in NPR state. The normal ADISC process will kick off in the regular discovery path after receiving a response from name server. Link: https://lore.kernel.org/r/20210707184351.67872-19-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
During RSCN storms, some instances of LIP on SLI-3 adapters lead to a situation where FLOGIs keep failing with firmware indicating an illegal command error code. This situation was preceded by an ADISC completion that was processed while the link was down. This path on SLI-3 performs a CLEAR_LA and attempts to activate a VPI with REG_VPI. Later, as the FLOGI completes, it's no longer in sync with the VPI state. In SLI-3 it is illegal to have an active VPI during FLOGI. Resolve by circumventing the SLI-3 path that performs the CLEAR_LA and REG_VPI. The path will be taken after the FLOGI after the next Link Up. Link: https://lore.kernel.org/r/20210707184351.67872-18-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
In the PLOGI and ADISC completion handling, the device removal event could be skipped during some link errors. This could leave a stale node in UNUSED state. Driver unload would hang for a long time waiting for this node to be freed. Resolve by taking the following steps: - Always post ADISC completion events to discovery state machine upon ADISC completion. - In case of a completion error for PLOGI/ADISC, ensure that init refcount is dropped if not registered with transport. Link: https://lore.kernel.org/r/20210707184351.67872-17-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
On an RSCN event, the nodes specified in RSCN payload and in MAPPED state are moved to NPR state in order to revalidate the login. This triggers an immediate unregister from SCSI/NVMe backend. The assumption is that the node may be missing. The re-registration with the backend happens after either relogin (PLOGI/PRLI; if ADISC is disabled or login truly lost) or when ADISC completes successfully (rediscover with ADISC enabled). However, the NVMe-FC standard provides for an RSCN to be triggered when the remote port supports a discovery controller and there was a change of discovery log content. As the remote port typically also supports storage subsystems, this unregister causes all storage controller connections to fail and require reconnect. Correct by reworking the code to ensure that the unregistration only occurs when a login state is truly terminated, thereby leaving the NVMe storage controllers in place. The changes made are: - Retain node state in ADISC_ISSUE when scheduling ADISC ELS retry. - Do not clear wwpn/wwnn values upon ADISC failure. - Move MAPPED nodes to NPR during RSCN processing, but do not unregister with transport. On GIDFT completion, identify missing nodes (not marked NLP_NPR_2B_DISC) and unregister them. - Perform unregistration for nodes that will go through ADISC processing if ADISC completion fails. - Successful ADISC completion will move node back to MAPPED state. Link: https://lore.kernel.org/r/20210707184351.67872-16-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Assign a default value of 1 to driver module parameter lpfc_use_adisc. Link: https://lore.kernel.org/r/20210707184351.67872-15-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
The SLI4 interface changed the manner used to indicate PBDE support. Rework the driver to check for PBDE support via the PBDE feature bit in COMMON_GET_SLI4_PARAMETERS. Link: https://lore.kernel.org/r/20210707184351.67872-14-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Mailbox commands sent via ioctl/bsg from user applications may be interrupted from processing by a concurrently triggered PCI function reset. The command will not generate a completion due to the reset. This results in a user application hang waiting for the mailbox command to complete. Resolve by changing the function reset handler to detect that there was an outstanding mailbox command and simulate a mailbox completion. Add some additional debug when a mailbox command times out. Link: https://lore.kernel.org/r/20210707184351.67872-13-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
In lpfc_offline_prep() an RPI is freed and nlp_rpi set to 0xFFFF before calling lpfc_unreg_rpi(). Unfortunately, lpfc_unreg_rpi() uses nlp_rpi to index the sli4_hba.rpi_ids[] array. In lpfc_offline_prep(), unreg rpi before freeing the rpi. Link: https://lore.kernel.org/r/20210707184351.67872-12-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Since the REG_LOGIN to the fabric controller happens in parallel with SCR, it may or may not be completed by the time RDF is sent. RDF and SCR are sent to the fabric in parallel, so checking for a completed REG_LOGIN in the RDF submit path is not needed. Remove the REG_LOGI check from the RDF submission path. Link: https://lore.kernel.org/r/20210707184351.67872-11-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
The ELS job request structure, that is allocated while issuing ELS RDF/SCR request path, is not being released in an error path causing a memory leak message on driver unload. Free the ELS job structure in the error paths. Link: https://lore.kernel.org/r/20210707184351.67872-10-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
RDF ELS handling for NPIV ports may result in an incorrect NDLP reference count. In the event of a persistent link down, this may lead to premature release of an NDLP structure and subsequent NULL ptr dereference panic. Remove extraneous lpfc_nlp_put() call in NPIV port RDF processing. Link: https://lore.kernel.org/r/20210707184351.67872-9-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
In the routine that generically cleans up an ELS after completion, the NDLP put is done prior to the freeing of the IOCB. The IOCB may reference the NDLP. Move the lpfc_nlp_put() after freeing the IOCB. Link: https://lore.kernel.org/r/20210707184351.67872-8-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Previous logic accidentally overrides the status variable to FAILURE when target reset status is SUCCESS. Refactor the non-SUCCESS logic of lpfc_vmid_vport_cleanup(), which resolves the false override. Link: https://lore.kernel.org/r/20210707184351.67872-7-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
If a LOGO is received for a node that is in the NPR state, post a DEVICE_RM event to allow clean up of the logged out node. Clearing the NLP_NPR_2B_DISC flag upon receipt of a LOGO ACC may cause skipping of processing outstanding PLOGIs triggered by parallel RSCN events. If an outstanding PLOGI is being retried and receipt of a LOGO ACC occurs, then allow the discovery state machine's PLOGI completion to clean up the node. Link: https://lore.kernel.org/r/20210707184351.67872-6-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Update comment headers for functions lpfc_vmid_cmd and lpfc_vmid_poll. Link: https://lore.kernel.org/r/20210707184351.67872-5-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Define additional status fields in mailbox commands to help provide additional information when downloading new firmware. Link: https://lore.kernel.org/r/20210707184351.67872-4-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
There are instances when trace event logs are triggered from an interrupt context. The trace event log may attempt to alloc memory causing scheduling while atomic bug call traces. Remove the need for the kmalloc'ed vport array when checking the log_verbose flag, which eliminates the need for any allocation. Link: https://lore.kernel.org/r/20210707184351.67872-3-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
The NVMe support indicator in log message 6422 is displaying a field that was initialized but never set to indicate NVMe support. Remove obsolete nvme_support element from the lpfc_hba structure and change log message to display NVMe support status as reported in SLI4 Config Parameters mailbox command. Link: https://lore.kernel.org/r/20210707184351.67872-2-jsmart2021@gmail.comCo-developed-by:
-
Christoph Hellwig authored
flush_kernel_dcache_page() is not used by aacraid, and this header already comes in through the scatterlist/block headers anyway. Link: https://lore.kernel.org/r/20210712060928.4161649-6-hch@lst.deSigned-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Colin Ian King authored
The continue statement at the end of the for-loop is redundant, remove it. Link: https://lore.kernel.org/r/20210702131542.19880-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Mike Christie authored
This fixes a bug found by Lv Yunlong where, because beiscsi_exec_nemb_cmd() frees memory for the be_dma_mem cmd(), we can access freed memory when beiscsi_if_clr_ip()/beiscsi_if_set_ip()'s call to beiscsi_exec_nemb_cmd() fails and we access the freed req. This fixes the issue by having the caller free the cmd's memory. Link: https://lore.kernel.org/r/20210701190840.175120-1-michael.christie@oracle.comReported-by:
Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
-
- 18 Jul, 2021 3 commits
-
-
Keoseong Park authored
Simplify if-else statement to return statement and remove code related to CONFIG_SCSI_UFS_DWC that is not in use. Link: https://lore.kernel.org/r/1891546521.01624860001810.JavaMail.epsvc@epcpadp3 Cc: Joao Pinto <jpinto@synopsys.com> Reviewed-by:
Bean Huo <beanhuo@micron.com> Reviewed-by:
Keoseong Park <keosung.park@samsung.com> Signed-off-by:
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Skip invalid hybrid PMU on hybrid systems when the atom (little) CPUs are offlined. - Fix 'perf test' problems related to the recently added hybrid (BIG/little) code. - Split ARM's coresight (hw tracing) decode by aux records to avoid fatal decoding errors. - Fix add event failure in 'perf probe' when running 32-bit perf in a 64-bit kernel. - Fix 'perf sched record' failure when CONFIG_SCHEDSTATS is not set. - Fix memory and refcount leaks detected by ASAn when running 'perf test', should be clean of warnings now. - Remove broken definition of __LITTLE_ENDIAN from tools' linux/kconfig.h, which was breaking the build in some systems. - Cast PTHREAD_STACK_MIN to int as it may turn into 'long sysconf(__SC_THREAD_STACK_MIN_VALUE), breaking the build in some systems. - Fix libperf build error with LIBPFM4=1. - Sync UAPI files changed by the memfd_secret new syscall. * tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (35 commits) perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernel perf data: Close all files in close_dir() perf probe-file: Delete namelist in del_events() on the error path perf test bpf: Free obj_buf perf trace: Free strings in trace__parse_events_option() perf trace: Free syscall tp fields in evsel->priv perf trace: Free syscall->arg_fmt perf trace: Free malloc'd trace fields on exit perf lzma: Close lzma stream on exit perf script: Fix memory 'threads' and 'cpus' leaks on exit perf script: Release zstd data perf session: Cleanup trace_event perf inject: Close inject.output on exit perf report: Free generated help strings for sort option perf env: Fix memory leak of cpu_pmu_caps perf test maps__merge_in: Fix memory leak of maps perf dso: Fix memory leak in dso__new_map() perf test event_update: Fix memory leak of unit perf test event_update: Fix memory leak of evlist ...
-
