During initialisation DAPM tries to read the state of the MUX
being connected, resulting in this error log:
input-mux: ASoC: error at soc_component_read_no_lock on input-mux: -5

Provide a read function which allows DAPM to read the state of the
MUX.
Signed-off-by: Maarten Zanders <maarten.zanders@mind.be>
Link: https://lore.kernel.org/r/20221028191303.166115-1-maarten.zanders@mind.beSigned-off-by: Mark Brown <broonie@kernel.org>

Switch the driver from legacy gpio API that is deprecated to the newer
gpiod API that respects line polarities described in ACPI/DT.

The driver still tries to support shared reset lines, by first trying to
allocate the reset GPIO normally, and then non-exclusively, although the
utility of such support is questionable, toggling reset line from one
driver/instance will result in all chips being reset, potentially at an
inopportune moment.

Note that this change depends on commit fbbbcd17 ("gpiolib: of: add
quirk for locating reset lines with legacy bindings") to translate
request for "reset" GPIO to the legacy name "gpio-reset" in case when
proper name is not used.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20221102232004.1721864-3-dmitry.torokhov@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20221102232004.1721864-2-dmitry.torokhov@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

As of 0426370b ("ARM: dts: omap2420-n810: Correct the audio codec
(tlv320aic33) node") the DTS properly specifies reset GPIO, and the
device name in auxdata lookup table does not even match the one in
device tree anymore, so stop instantiating it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221102232004.1721864-1-dmitry.torokhov@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

If snd_hdac_device_register() fails, 'codec' and name allocated in
dev_set_name() called in snd_hdac_device_init() are leaked. Fix this
by calling put_device(), so they can be freed in snd_hda_codec_dev_release()
and kobject_cleanup().

Fixes: 829c6731 ("ASoC: SOF: Intel: Introduce HDA codec init and exit routines")
Fixes: dfe66a18 ("ALSA: hdac_ext: add extended HDA bus")
Suggested-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221021123849.456857-2-yangyingliang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

If snd_hdac_device_register() fails, 'codec' and name allocated in
dev_set_name() called in snd_hdac_device_init() are leaked. Fix this
by calling put_device(), so they can be freed in snd_hda_codec_dev_release()
and kobject_cleanup().

Fixes: e4746d94 ("ASoC: Intel: Skylake: Introduce HDA codec init and exit routines")
Fixes: dfe66a18 ("ALSA: hdac_ext: add extended HDA bus")
Suggested-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221021123849.456857-1-yangyingliang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Chancel Liu <chancel.liu@nxp.com>:

This patchset supports MICFIL on i.MX93 platform.

On i.MX93 platform MICFIL uses eDMA. The maxburst should be set to the
number of channels in eDMA multiple FIFO mode.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20221028082750.991822-4-chancel.liu@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add compatible string and specific soc data to support MICFIL on i.MX93
platform.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20221028082750.991822-3-chancel.liu@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add compatible string "fsl,imx93-micfil" for i.MX93 platform
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221028082750.991822-2-chancel.liu@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

When trying to connect the device with the driver through
device-tree it is not working. The of_device_id is defined in
cs42xx8.c but is not correctly included in cs42xx8-i2c.c.

Move of_device_id table to cs42xx8-i2c.c. Get cs42xx8_driver_data
in cs42xx8_i2c_probe() and pass as argument to cs42xx8_probe(). Move
error check if no driver data found to cs42xx8_i2c_probe().
Signed-off-by: Peter Bergin <peter@berginkonsult.se>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221031203723.168177-1-peter@berginkonsult.seSigned-off-by: Mark Brown <broonie@kernel.org>

Replace them with read8/write8 to avoid compilation issue on ARM. In
hindsight this is more consistent with the read64/write64 helpers
already used in SOF.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/alsa-devel/Y1rTFrohLqaiZAy%2F@dev-arch.thelio-3990X/Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221031195340.249868-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Aidan MacDonald <aidanmacdonald.0x0@gmail.com>:

A quick series to get rid of .set_sysclk() from jz4740-i2s.
It wasn't used in practice so this shouldn't be troublesome for anyone,
and fortunately there aren't any backward compatibility concerns.

The actual rationale for removing it, as opposed to fixing the
issues of the current DT bindings and implementation, is provided
in the dt-bindings patch.

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

The probes (the ability of probing the audio data from firmware processing
points or to receive stream of debug/trace information) is supported by IPC4
as well, but due to the differences between the two IPC version the low level
setup and information we need for probing is different.

This series will extend the existing probes support for IPC3 with IPC4 'backend'

snd_soc_util_exit() is called in __init snd_soc_init() for cleanup.
Remove the __exit annotation for it to fix the build warning:

WARNING: modpost: sound/soc/snd-soc-core.o: section mismatch in reference: init_module (section: .init.text) -> snd_soc_util_exit (section: .exit.text)

Fixes: 6ec27c53 ("ASoC: core: Fix use-after-free in snd_soc_exit()")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221031134031.256511-1-chenzhongjin@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Implement IPC operations for IPC4 messaging and add doxygen
documentation for the functions.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221031105141.19037-6-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add sof_client_ipc4_find_module() for calling
sof_ipc4_find_module_by_uuid() in sof client code.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221031105141.19037-5-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

No need to duplicate set_get_data msg handling in clients.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221031105141.19037-4-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Declare an IPC ops struct for probes client device and move IPC3
functions behind it.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221031105141.19037-3-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Replace probes related [0] arrays, all found within unions, with
DECLARE_FLEX_ARRAY() declarations.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221031105141.19037-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The AIC needs only the first two clocks: "aic" is a gate that's used
for gating the I2S controller when it's suspended, and "i2s" is the
system clock, from which the bit and frame clocks are derived. Both
clocks are therefore reasonably part of the AIC and should be passed
to the OS.

But the "ext" and "pll half" clocks are a little more questionable.
It appears these bindings were introduced when the schema was first
converted to YAML, but weren't present in the original .txt binding.
They are intended to be the possible parent clocks of "i2s".

The JZ4770 actually has three parents for its "i2s" clock, named
"ext", "pll0", and "pll1" in the Linux driver. The JZ4780 has two
parents but it doesn't have a "pll half" clock, instead it has an
"i2s_pll" clock which behaves much differently to the actual
"pll half" clock found on the JZ4740 & JZ4760. And there are other
Ingenic SoCs that share the JZ4780's clock layout, eg, the X1000.

Therefore, the bindings aren't really adequate for the JZ4770 and
a bit misleading for the JZ4780. Either we should fix the bindings,
or remove them entirely.

This patch opts to remove the bindings. There is a good case to be
made that "ext" and "pll half" don't belong here because they aren't
directly used by the AIC. They are only used to set the parent of
the "i2s" clock; they have no other effect on the AIC.

A good way to think of it is in terms of how the AIC constrains
clocks. The AIC can only generate the bit & frame clocks from the
system clock in certain ratios. Setting the sample rate effectively
constrains the frame clock, which, because of the clock dividers
controlled by the AIC, translates to constraints on the "i2s" clock.
Nothing in the AIC imposes a direct constraint on the parents of
the "i2s" clock, and the AIC does not need to enable or disable
the parents directly, so in principle the AIC doesn't need to be
aware of the parent clocks at all.

The choice of parent clock is still important, but the AIC doesn't
have enough information to apply such constraints itself. The sound
card does have that information because it knows how the AIC is
connected to other components. We need to use other DT mechanisms
to communicate those constraints at the sound card level, instead
of passing the clocks through to the AIC, and inventing ad-hoc ways
to plumb the constraints around behind the scenes.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221028103418.17578-2-aidanmacdonald.0x0@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

.set_sysclk() is effectively unused here. No machine drivers use
jz4740-i2s; and JZ4740_I2S_CLKSRC_EXT is the only selectable clock
source with simple-card, but that is also the default source and
has a fixed frequency, so configuring it would be redundant.

simple-card ignores -ENOTSUPP error codes when setting the sysclock,
so any device trees that do set the sysclock for some reason should
still work.

It's still possible to configure the clock parent manually in the
device tree and control frequency using other simple-card options,
so at the end of the day there's no real loss in functionality.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221028103418.17578-4-aidanmacdonald.0x0@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:

This patchset adds support to multi-port connections between AudioReach Modules
which is required for sophisticated graphs like ECNS or Speaker Protection.
Also as part of ECNS testing new module support for SAL and MFC are added.

Tested on SM8450 with ECNS.

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

Existing HDaudio controllers expose an HDAudio DMA which is used to
interface with HDaudio codecs. All other interfaces supported by Intel
(SoundWire, SSP, DMIC) rely for data transfers on another GP-DMA
managed by the DSP firmware - the HDaudio DMA is only used for
memory-to-DSP transfers.

New HDaudio extensions will enable the use of this HDaudio DMA for all
of SoundWire, SSP, DMIC. These extensions will be backwards-compatible
for HDaudio and iDISP codecs, but will require new programming
sequences and DAI callbacks for SoundWire, SSP and DMIC.

Before we add support for 'extended audio links' and the programming
sequences for the DMA, we need to refactor the code. All HDaudio codec
support needs to be well identified in a separate file, and likewise
all the 'multi-link' handling needs to be better split.

This patchset removes a number of 'old' Kconfig dependencies and
options, adds helpers with a fallback to remove IS_ENABLED checks in
the code and tries to simplify programming sequences when possible.

One indirect benefit from this refactoring is that developers can
switch with a kernel parameter from HDaudio support to a variant of
'nocodec' support. This proves extremely useful to test on existing
Intel RVPs and Up boards, where the same build can be used to check 3
interfaces (HDaudio, SSP, DMIC) by just removing modules, setting the
kernel parameter and reloading modules.

Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:

Goal of the series is implementation of suspend/resume operations for a
PCM stream along with all the collaterals connected to the subject.

Start with splitting avs_dai_fe_hw_free() as ideally we would like to
reuse as much of existing code as possible but snd_pcm_lib_free_pages()
is not desired part of the function when speaking of suspend operation.

The actual implementation of suspend/resume() for component drivers
follows. For most scenarios, the PM flow is similar to standard
streaming one, except for the part where the position register are being
saved and the lack of PCM pages freeing. To reduce code duplication, all
avs_dai_suspend_XXX() and avs_dai_resume_XXX() functions reuse their
non-PM equivalents.
Order of operations is affected by the fact that path binding/unbinding
happens only in FE part of the stream.

Above essentially unlocks SX+streaming scenarios i.e.: power transitions
with an ongoing stream.

As some streams are allowed to run in low power state, support is
provided for S0iX state. The handlers check ACPI capabilities and the
number of active low-power paths before deciding between SX and S0iX
flows.

The last portion of the patchset is addition of power/clock gating
overrides. There is no single set of registers that ensures AudioDSP
firmware loads 100% of time on every single configuration. By having
them exposed, user can have the loading procedure behavior adjusted for
their configuration without having to recompile the kernel.

Add support to enable Module command which is required for logging
module to be able to debug.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221027102710.21407-10-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add support to enable and configure Media Format Converter (MFC) Module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221027102710.21407-9-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add support to Simple Accumulator-Limiter module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221027102710.21407-8-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

AudioReach Modules can connect to other modules using source and
destination port, and each module in theory can support up to 255 port
connections. But in practice this limit is at max 8 ports at a time.
So add support for allowing multiple port connections.

This support is needed for more detailed graphs like ECNS, speaker
protection and so.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221027102710.21407-7-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Simplify module_list size calculation by doing inside modules loop.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221027102710.21407-6-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Current AudioReach design of connecting FE and BE graph is very complicated
and not reliable. Instead used the virtual damp widgets private data to help
identify the modules that needs connection at runtime. Also maintain a
inter-graph connection info in the graph info, which can be used to both
determine if the graphs are connected and at graph build time.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221027102710.21407-5-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Update kcontrol private date to include more information like graph id
and module instance id which its connected to. Also maintain this virtual
dapm mixer widget in a list so that we could lookup while FE and BE connection
are added.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221027102710.21407-4-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Remove unused connection_list parameter.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221027102710.21407-3-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

SubGraph and Module Instance ids take 32 bits, so use idr_alloc_u32
instead of idr_alloc to able to accommodate valid ranges.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221027102710.21407-2-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Chancel Liu <chancel.liu@nxp.com>:

This patchset supports SAI on i.MX93 platform.

The existing NOCODEC mode enforces a build-time mutual exclusion with
the HDaudio link support, mostly to avoid any dependency on the
snd_hdac library and references to HDAudio codec/i915 stuff.

This is very useful to track dependencies and test a minimal
configuration, but very painful for developers and CI: a recompilation
and reinstall of the kernel modules is required.

This patch suggests an alternate middle ground where the selection of
the machine driver and all codec-related actions are bypassed at
run-time, contingent on a kernel module parameter being set.

For example setting BIT(10) with
'options snd_sof sof_debug=0x401'
is enough to switch from an HDaudio card to a nocodec one.

This new DEBUG_NOCODEC mode is not suitable for distributions and
end-users. It's not even recommended on all platforms, i.e. the
NOCODEC mode is known not to work on specific devices where the BIOS
did not configure support for I2S/DMIC interfaces. The usual
development devices such as Chromebooks, Up boards and Intel RVP are
the only recommended platforms where this mode can be supported.

Note that the dynamic switch between HDaudio and nocodec may not
always possible depending on hardware layout, pin-mux options, and
BIOS settings. The audio subsustems on Intel platforms has to support
4 types of interfaces and pin-mux can be complicated.

Reviewers might ask: why didn't we do this earlier? The main reason is
that all the codec-related configurations were not cleanly separated
out in the sof/intel directory. With all the cleanups done recently,
adding this opt-in behavior is relatively straightforward.

Tested on UpExtreme (WHL) and UpExtreme i11 (TGL).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-22-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

All the HDAudio codec handling is completely specific to Linux and
completely dependency on GPL2.0 code, specifically the snd_hdac_
library.

There was no intention to have a dual-license for this code, this was
an oversight that needs to be corrected. Update the SPDX and
EXPORT_SYMBOL information, no functionality change otherwise.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-21-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Since we've moved to the same flows for HDaudio and iDISP codecs, we
need to be more consistent about dependencies.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-20-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add helper matching allocation done in hda_bus_ml_get_capabilities().

No functionality change, just clearer code partitioning.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-19-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

No functionality change, just move the code in hda-mlink.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221027193540.259520-18-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>