- 12 Oct, 2013 5 commits
-
-
Antonio Quartulli authored
In case of a VLAN tagged frame the ethhdr pointer is moved forward by 4 bytes so that the offset of h_proto in struct ethhdr matches the real h_vlan_encapsulated_proto address in the skb. While this trickery is correct it makes the code harder to understand and may lead to bugs in case of re-use of ethhdr for other purposes. This patch introduces a proto variable to make things cleaner and easier to understand. Signed-off-by:
Antonio Quartulli <ordex@autistici.org> Signed-off-by:
Marek Lindner <lindner_marek@yahoo.de>
-
Antonio Quartulli authored
batadv_tt_global_entry_free_ref uses call_rcu to schedule a function which will only free the global entry itself. For this reason call_rcu is useless and kfree_rcu can be used to simplify the code. Signed-off-by:
-
Antonio Quartulli authored
batadv_tt_global_add_orig is neither used nor implemented anymore, therefore it is possible to remove its declaration Signed-off-by:
-
Antonio Quartulli authored
batadv_tt_global_add is not used anymore outside of the TT code thanks to the TVLV implementation. It can therefore be declared as static Last user has been removed by 3de4e64df0f1326db7cc0ef25f5af8522850252d ("batman-adv: tvlv - convert roaming adv packet to use tvlv unicast packets") Moreover make it return bool since its result can be either 0 or 1. Reported-by:Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by:
-
Simon Wunderlich authored
Adding host information for record route is only required for ICMP requests and replys, and should not be added to just any (future?) packet type. Signed-off-by:
Antonio Quartulli <antonio@meshcoding.com>
-
- 11 Oct, 2013 2 commits
-
-
Eric Dumazet authored
1) We need to take a timestamp only for skb that should be cloned. Other skbs are not in write queue and no rtt estimation is done on them. 2) the unlikely() hint is wrong for receivers (they send pure ACK) Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: MF Nowlan <fitz@cs.yale.edu> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-By:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Included changes: - update emails for A. Quartulli and M. Lindner in MAINTAINERS - switch to the next on-the-wire protocol version - introduce the T(ype) V(ersion) L(ength) V(alue) framework - adjust the existing components to make them use the new TVLV code - make the TT component use CRC32 instead of CRC16 - totally remove the VIS functionality (has been moved to userspace) - reorder packet types and flags - add static checks on packet format - remove __packed from batadv_ogm_packet
-
- 10 Oct, 2013 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== This series contains updates to i40e only. Alex provides the majority of the patches against i40e, where he does cleanup of the Tx and RX queues and to align the code with the known good Tx/Rx queue code in the ixgbe driver. Anjali provides an i40e patch to update link events to not print to the log until the device is administratively up. Catherine provides a patch to update the driver version. ==================== Signed-off-by: -
Eric Dumazet authored
In commit 634fb979 ("inet: includes a sock_common in request_sock") I forgot that the two ports in sock_common do not have same byte order : skc_dport is __be16 (network order), but skc_num is __u16 (host order) So sparse complains because ir_loc_port (mapped into skc_num) is considered as __u16 while it should be __be16 Let rename ir_loc_port to ireq->ir_num (analogy with inet->inet_num), and perform appropriate htons/ntohs conversions. Signed-off-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Catherine Sullivan authored
Update the version number of the driver. Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This change brings support for 64 bit netstats to the driver. Previously the stats were 64 bit but highly racy due to the fact that 64 bit transactions are not atomic on 32 bit systems. This change makes is so that the 64 bit byte and packet stats are reliable on all architectures. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Alexander Duyck authored
Allocate the queue pairs individually instead of as a group. This allows for much easier queue management as it is possible to dynamically resize the queues without having to free and allocate the entire block. Ease statistic collection by treating Tx/Rx queue pairs as a single unit. Each pair is allocated together and starts with a Tx queue and ends with an Rx queue. By ordering them this way it is possible to know the Rx offset based on a pointer to the Tx queue. Signed-off-by:
-
Alexander Duyck authored
This replaces the ring container array with a linked list. The idea is to make the logic much easier to deal with since this will allow us to call a simple helper function from the q_vectors to go through the entire list. Signed-off-by:
-
Alexander Duyck authored
Allocate the q_vectors individually. The advantage to this is that it allows for easier freeing and allocation. In addition it makes it so that we could do node specific allocations at some point in the future. Signed-off-by:
-
Alexander Duyck authored
This makes it so that the Tx and Rx byte and packet counts are separated from the rest of the statistics. This allows for better isolation of these stats when we move them into the 64 bit statistics. Simplify things by re-ordering how the stats display in ethtool. Instead of displaying all of the Tx queues as a block, followed by all the Rx queues, the new order is Tx[0], Rx[0], Tx[1], Rx[1], ..., Tx[n], Rx[n]. This reduces the loops and cleans up the display for testing purposes since it is very easy to verify if flow director is doing the right thing as the Tx and Rx queue pair are shown in pairs. Signed-off-by:
-
Alexander Duyck authored
Implement BQL (byte queue limit) support in i40e. Signed-off-by:
-
Alexander Duyck authored
Drop Tx flag and TXSW which is tested but never set. As a result of this change we can drop a complicated check that always resulted in the final result of i40e_tx_csum being equal to the CHECKSUM_PARTIAL value. As such we can replace the entire function call with just a check for skb->summed == CHECKSUM_PARTIAL. Signed-off-by:
-
Alexander Duyck authored
Sync the fast path for i40e_tx_map and i40e_clean_tx_irq so that they are similar to igb and ixgbe. - Only update the Tx descriptor ring in tx_map - Make skb mapping always on the first buffer in the chain - Drop the use of MAPPED_AS_PAGE Tx flag - Only store flags on the first buffer_info structure Signed-off-by:
-
Alexander Duyck authored
Avoid directly incrementing next_to_use for multiple reasons. The main reason being that if we directly increment it then it can attain a state where it is equal to the ring count. Technically this is a state it should not be able to reach but the way this is written it now can. This patch pulls the value off into a register and then increments it and writes back either the value or 0 depending on if the value is equal to the ring count. Signed-off-by:
-
Alexander Duyck authored
- drop the mapped_as_page u8 from the Tx buffer info as it was unused - use the DMA unmap accessors for Tx DMA - replace checks of DMA with checks of the unmap length to verify if an unmap is needed - update the Tx buffer layout to make it consistent with igb, ixgbe Signed-off-by:
-
Eric Dumazet authored
sk_pacing_rate is read by sch_fq packet scheduler at any time, with no synchronization, so make sure we update it in a sensible way. ACCESS_ONCE() is how we instruct compiler to not do stupid things, like using the memory location as a temporary variable. Signed-off-by:
-
Eric Dumazet authored
TCP listener refactoring, part 5 : We want to be able to insert request sockets (SYN_RECV) into main ehash table instead of the per listener hash table to allow RCU lookups and remove listener lock contention. This patch includes the needed struct sock_common in front of struct request_sock This means there is no more inet6_request_sock IPv6 specific structure. Following inet_request_sock fields were renamed as they became macros to reference fields from struct sock_common. Prefix ir_ was chosen to avoid name collisions. loc_port -> ir_loc_port loc_addr -> ir_loc_addr rmt_addr -> ir_rmt_addr rmt_port -> ir_rmt_port iif -> ir_iif Signed-off-by:
-
Eric Dumazet authored
skb_gro_receive() is currently limited to 16 or 17 MSS per GRO skb, typically 24616 bytes, because it fills up to MAX_SKB_FRAGS frags. It's relatively easy to extend the skb using frag_list to allow more frags to be appended into the last sk_buff. This still builds very efficient skbs, and allows reaching 45 MSS per skb. (45 MSS GRO packet uses one skb plus a frag_list containing 2 additional sk_buff) High speed TCP flows benefit from this extension by lowering TCP stack cpu usage (less packets stored in receive queue, less ACK packets processed) Forwarding setups could be hurt, as such skbs will need to be linearized, although its not a new problem, as GRO could already provide skbs with a frag_list. We could make the 65536 bytes threshold a tunable to mitigate this. (First time we need to linearize skb in skb_needs_linearize(), we could lower the tunable to ~16*1460 so that following skb_gro_receive() calls build smaller skbs) Signed-off-by:
-
baker.zhang authored
This is a enhancement. for the first node in fib_trie, newpos is 0, bit is 1. Only for the leaf or node with unmatched key need calc pos. Signed-off-by:
baker.zhang <baker.kernel@gmail.com> Signed-off-by:
-
Gao feng authored
We can only setup multicast address for network device when net_device_ops->ndo_set_rx_mode is not null. Some configurations need to add multicast address for net device, such as netfilter cluster match module. Add a fake ndo_set_rx_mode function to allow this operation. Signed-off-by:
Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by:
-
Alexander Duyck authored
The Tx "completed" stat was part of the original rewrite for detecting Tx hangs. However some time ago in ixgbe I determined that we could just use the packets stat instead. Since then this stat was removed from ixgbe and it serves no purpose in i40e so it can be dropped. Signed-off-by:
-
Anjali Singhai authored
Link events should not print to the log until the device is administratively up. Signed-off-by:
Anjali Singhai <anjali.singhai@intel.com> Signed-off-by:
-
- 09 Oct, 2013 13 commits
-
-
Ajit Khaparde authored
Signed-off-by:
Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by:
-
Ajit Khaparde authored
SkyHawk-R can support RoCE. Add code to display RoCE specific counters maintained in hardware. Signed-off-by:
-
Ajit Khaparde authored
Moving to version 2 of GET_STATS command as SkyHawk-R supports higher number of rings. Signed-off-by:
-
Simon Wunderlich authored
The vis flag is not needed anymore, and since we do a compat bump we can start with the first bit again Signed-off-by:
-
Simon Wunderlich authored
As we decreased the struct size from 26 to 24 byte, we can remove __packed as the compiler will not add any more padding. Signed-off-by:
-
Simon Wunderlich authored
Reordering the packet type numbers allows us to handle unicast packets in a general way - even if we don't know the specific packet type, we can still forward it. There was already code handling this for a couple of unicast packets, and this is the more generalized version to do that. Signed-off-by:
-
Simon Wunderlich authored
Since we removed the __packed from most of the packets, we should make sure that the offset generated by the compiler are correct for sent/received data. Signed-off-by:
-
Simon Wunderlich authored
This is replaced by a userspace program, we don't need this functionality to bloat the kernel. Signed-off-by:
-
Antonio Quartulli authored
Client flags from bit 0 to 7 are sent over the wire. BATADV_TT_CLIENT_TEMP is a local flag and is not supposed to be sent to the network. Therefore it has occupy a higher bit. Signed-off-by:
-
Antonio Quartulli authored
CRC32C has to be preferred to CRC16 because of its possible HW native support and because of the reduced collision probability. With this change the Translation Table component now uses CRC32C to compute the local and global table checksum. Signed-off-by:
-
Marek Lindner authored
Instead of generating roaming specific packets the TVLV unicast API is used to send roaming information. Signed-off-by:
-
Marek Lindner authored
Instead of generating TT specific packets the TVLV unicast API is used to send translation table data. Signed-off-by:
-
Marek Lindner authored
The translation table meta data (version number, crc checksum, etc) as well as the translation table diff propgated within OGMs now uses the newly introduced tvlv infrastructure. Signed-off-by:
-
