- 17 Jul, 2021 1 commit
-
-
Linus Walleij authored
This adds device tree bindings for the Samsung Mobile Displays LMS380KF01 RGB DPI display panel. Cc: devicetree@vger.kernel.org Cc: phone-devel@vger.kernel.org Cc: Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210714225002.1065107-1-linus.walleij@linaro.org
-
- 15 Jul, 2021 9 commits
-
-
Douglas Anderson authored
Even after the DP AUX backlight on my board worked OK after applying the patch ("drm/panel-simple: Power the panel when probing DP AUX backlight") [1], I still noticed some strange timeouts being reported by ti_sn_aux_transfer(). Digging, I realized the problem was this: * Even though `enabled` in `struct dp_aux_backlight` was false, the base backlight structure (`base` in that structure) thought that the backlight was powered on. * If userspace wrote to sysfs in this state then we'd try to enable the backlight. * Unfortunatley, enabling the backlight didn't work because the panel itself wasn't powered. We can only use the backlight if the panel is on and the panel is not officially on when we probe (it's temporarily just on enough for us to talk to it). The important thing we want here is to get `BL_CORE_FBBLANK` set since userspace can't mess with that. This will keep us disabled until drm_panel enables us, which means that the panel is enabled first. Ideally we'd just set this in our `props` before calling devm_backlight_device_register() but the comments in the header file are pretty explicit that we're not supposed to much with the `state` ourselves. Because of this, there may be a small window where the backlight device is registered and someone could try to tweak with the backlight. This isn't likely to happen and even if it did, I don't believe this causes any huge problem. [1] https://lore.kernel.org/lkml/20210714093334.1.Idb41f87e5abae4aee0705db7458b0097fc50e7ab@changeid/Signed-off-by:Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210714101744.1.Ifc22696b27930749915e383f0108b7bcdc015a6e@changeid
-
Douglas Anderson authored
When I tried booting up a device that needed the DP AUX backlight, I found an error in the logs: panel-simple-dp-aux: probe of aux-ti_sn65dsi86.aux.0 failed with error -110 The aux transfers were failing because the panel wasn't powered. Just like when reading the EDID we need to power the panel when trying to talk to it. Add the needed pm_runtime calls. After I do this I can successfully probe the panel and adjust the backlight on my board. Fixes: bfd45140 ("drm/panel-simple: Support DP AUX backlight") Signed-off-by:
-
Steven Price authored
When bailing out due to the sanity check the iterator value needs to be freed because the early return prevents for_each_child_of_node() from doing the dereference itself. Fixes: 65290075 ("drm: of: Add drm_of_lvds_get_dual_link_pixel_order") Signed-off-by:
Steven Price <steven.price@arm.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210714143300.20632-1-steven.price@arm.com
-
Thomas Zimmermann authored
The comment refers to drm_irq_install() et al, which are not used by omapdrm. The functions are part of the DRM IRQ midlayer and shouldn't be used any longer. Remove the comment. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210706073125.7689-1-tzimmermann@suse.de
-
Thomas Zimmermann authored
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. Signed-off-by:
-
Thomas Zimmermann authored
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. Signed-off-by:
-
Maxime Ripard authored
The drm_encoder crtc pointer isn't really fit for an atomic driver, let's rely on the connector state instead. Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Acked-by:
-
Maxime Ripard authored
Our hotplug handler will currently call the drm_kms_helper_hotplug_event every time a hotplug interrupt is called. However, since the device is registered after all the drivers have finished their bind callback, we have a window between when we install our interrupt handler and when drm_dev_register() is eventually called where our handler can run and call drm_kms_helper_hotplug_event but the device hasn't been registered yet, causing a null pointer dereference. Fix this by making sure we only call drm_kms_helper_hotplug_event if our device has been properly registered. Fixes: f4790083 ("drm/vc4: hdmi: Rely on interrupts to handle hotplug") Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210707095112.1469670-4-maxime@cerno.tech
-
Maxime Ripard authored
The hotplugs interrupt handlers are registered through the devm_request_threaded_irq function. However, while free_irq is indeed called properly when the device is unbound or bind fails, it's called after unbind or bind is done. In our particular case, it means that on failure it creates a window where our interrupt handler can be called, but we're freeing every resource (CEC adapter, DRM objects, etc.) it might need. In order to address this, let's switch to the non-devm variant to control better when the handler will be unregistered and allow us to make it safe. Fixes: f4790083 ("drm/vc4: hdmi: Rely on interrupts to handle hotplug") Signed-off-by:
-
- 14 Jul, 2021 2 commits
-
-
Christophe Branchereau authored
Add support for the Innolux/Chimei EJ030NA 3.0" 320x480 TFT panel. This panel can be found in the LDKs, RS97 V2.1 and RG300 (non IPS) handheld gaming consoles. While being 320x480, it is actually a horizontal 4:3 panel with non-square pixels in delta arrangement. Signed-off-by:
Christophe Branchereau <cbranchereau@gmail.com> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Reviewed-by:
-
Paul Cercueil authored
Add binding for the Innolux EJ030NA panel, which is a 320x480 3.0" 4:3 24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit interface. Signed-off-by:
-
- 13 Jul, 2021 7 commits
-
-
Daniel Vetter authored
shmem helpers seem a bit sloppy here by automatically rounding up when actually creating the buffer, which results in under-reporting of what we actually have. Caught by igt/vgem_basic tests. Acked-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210603164113.1433476-4-daniel.vetter@ffwll.ch
-
Douglas Anderson authored
We were getting a depmod error: depmod: ERROR: Cycle detected: drm_kms_helper -> drm -> drm_kms_helper It looks like the rule is that drm_kms_helper can call into drm, but drm can't call into drm_kms_helper. That means we've got to move the DP AUX backlight support into drm_dp_helper. NOTE: as part of this, I didn't try to do any renames of the main registration function. Even though it's in the drm_dp_helper, it still feels very parallel to drm_panel_of_backlight(). Fixes: 10f7b40e ("drm/panel: add basic DP AUX backlight support") Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-by:
Rajeev Nandan <rajeevny@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210712075933.v2.1.I23eb4cc5a680341e7b3e791632a635566fa5806a@changeid
-
Thomas Zimmermann authored
Store the shadow-buffer mapping's address in struct vkms_composer and use the value when composing the output. It's the same value as stored in the GEM SHMEM BO, but frees the composer code from its dependency on GEM SHMEM. Using struct dma_buf_map is how framebuffer access is supposed to be. The long-term plan is to perform all framebuffer access via struct dma_buf_map and avoid the details of accessing I/O and system memory. Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210705074633.9425-5-tzimmermann@suse.de
-
Thomas Zimmermann authored
Replace vkms' prepare_fb and cleanup_fb functions with the generic code for shadow-buffered planes. No functional changes. This change also fixes a problem where IGT kms_flip tests would create a segmentation fault within vkms. The driver's prepare_fb function did not report an error if a BO's vmap operation failed. The kernel later tried to operate on the non-mapped memory areas. The shared shadow-plane helpers handle errors correctly, so that the driver now avoids the segmantation fault. v2: * include paragraph about IGT tests in commit message (Melissa) Signed-off-by:
-
Thomas Zimmermann authored
Subclass struct drm_shadow_plane_state for VKMS planes and update all plane-state callbacks accordingly. Signed-off-by:
-
Thomas Zimmermann authored
Export the implementation of duplicate, destroy and reset helpers for shadow-buffered plane state. Useful for drivers that subclass struct drm_shadow_plane_state. The exported functions are wrappers around plane-state implementation, but using them is the correct thing to do for drivers. Signed-off-by:
-
Thomas Zimmermann authored
Commit 375cca1c ("drm/vgem: Implement mmap as GEM object function") broke several IGT tests in vgem_basic. [1] Attempts to fix the issue have not worked out so far. [2][3] Revert the change for now. Note that there is a patch that converts vgem to shmem helpers. [4] Merging this change would be preferable to modifying vgem's mmap code. v2: * fix spelling error in commit message (Daniel) [1] https://intel-gfx-ci.01.org/tree/drm-tip/igt@vgem_basic@unload.html [2] https://lore.kernel.org/intel-gfx/20210709154256.12005-1-tzimmermann@suse.de/ [3] https://lore.kernel.org/intel-gfx/20210712123321.3658-1-tzimmermann@suse.de/ [4] https://patchwork.freedesktop.org/series/90671/Signed-off-by:
-
- 12 Jul, 2021 3 commits
-
-
Sam Ravnborg authored
drm_bridge_funcs includes several duplicated operations as atomic variants have been added over time. New bridge drivers shall use the atomic variants - mark the deprecated operations to try to avoid usage in new bridge drivers. v2: - Drop out-dated comment about state in mode_set (Laurent) - Added missing "the" in a description Signed-off-by:
-
Julia Lawall authored
There is no need to free a NULL value. Instead, free the object that is leaking due to the iterator. The semantic patch that finds this problem is as follows: // <smpl> @@ expression x,e; identifier f; @@ x = f(...); if (x == NULL) { ... when any when != x = e * of_node_put(x); ... } // </smpl> Fixes: 65290075 ("drm: of: Add drm_of_lvds_get_dual_link_pixel_order") Signed-off-by:Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
-
ChunyouTang authored
The exception_code in register is only 8 bits,So if fault_status in panfrost_gpu_irq_handler() don't (& 0xFF),it can't get correct exception reason. and it's better to show all of the register value to custom,so it's better fault_status don't (& 0xFF). Signed-off-by:
ChunyouTang <tangchunyou@icubecorp.cn> Reviewed-by:
-
- 10 Jul, 2021 1 commit
-
-
Jagan Teki authored
nwl_dsi_plat_clk_config structure added in below commit but not used anywhere in the driver. commit <44cfc623> ("drm/bridge: Add NWL MIPI DSI host controller support") Drop it. Cc: Guido Günther <agx@sigxcpu.org> Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Reviewed-by:
Guido Günther <agx@sigxcpu.org> Signed-off-by:
-
- 09 Jul, 2021 14 commits
-
-
Stefan Riedmueller authored
This patch adds support for the EDT ETM0350G0DH6 3.5" (320x240) lcd panel to DRM simple panel driver. Signed-off-by:
Stefan Riedmueller <s.riedmueller@phytec.de> Signed-off-by:
Yunus Bas <y.bas@phytec.de> Signed-off-by:
-
Stefan Riedmueller authored
This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd panel to DRM simple panel driver. Signed-off-by:
-
Yunus Bas authored
The Emerging Display Technology ETM0350G0DH6 is a 3.5" WVGA TFT panel with capacitive multitouch. Add it to the list of compatibles. Signed-off-by:
-
Yunus Bas authored
The Emerging Display Technology ETMV570G2DHU is a 5.7" VGA TFT panel. Add it to the list of compatibles. Signed-off-by:
-
Jing Xiangfeng authored
psb_user_framebuffer_create() misses to call drm_gem_object_put() in an error path. Add the missed function call to fix it. Signed-off-by:
Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210629115956.15160-1-jingxiangfeng@huawei.com
-
Linus Walleij authored
Improve the bindings and make them more usable: - Pick in spi-cpha and spi-cpol from the SPI node parent, this will specify that we are "type 3" in the device tree rather than hardcoding it in the operating system. - Drop the u32 ref from the SPI frequency: comes in from the SPI host bindings. - Make spi-cpha, spi-cpol and port compulsory. - Update the example with a real-world SPI controller, spi-gpio. Cc: Noralf Trønnes <noralf@tronnes.org> Cc: devicetree@vger.kernel.org Signed-off-by:
-
Rajeev Nandan authored
Add Samsung 13.3" FHD eDP AMOLED panel. Signed-off-by:
-
Rajeev Nandan authored
Add Samsung 13.3" FHD eDP AMOLED panel. Signed-off-by:
-
Rajeev Nandan authored
Do not give a warning for the eDP panels if the "bus_format" is not specified, since most eDP panels can support more than one bus formats and this can be auto-detected. Also, update the check to include bpc=10 for the eDP panel. Signed-off-by:
-
Rajeev Nandan authored
Some panels datasheets may specify a delay between the enable GPIO and the regulator. Support this in panel-simple. Signed-off-by:
-
Rajeev Nandan authored
If there is no backlight specified in the device tree and the panel has access to the DP AUX channel then create a DP AUX backlight if supported by the panel. Signed-off-by:
-
Rajeev Nandan authored
Some panels support backlight control over DP AUX channel using VESA's standard backlight control interface. Using new DRM eDP backlight helpers, add support to create and register a backlight for those panels in drm_panel to simplify the panel drivers. The panel driver with access to "struct drm_dp_aux" can create and register a backlight device using following code snippet in its probe() function: err = drm_panel_dp_aux_backlight(panel, aux); if (err) return err; Then drm_panel will handle backlight_(enable|disable) calls similar to the case when drm_panel_of_backlight() is used. Currently, we are not supporting one feature where the source device can combine the backlight brightness levels set through DP AUX and the BL_PWM_DIM eDP connector pin. Since it's not required for the basic backlight controls, it can be added later. Signed-off-by:
-
Christian König authored
Drivers also need to to sync to the exclusive fence when a shared one is present. Completely untested since the driver won't even compile on !ARM. Signed-off-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210702111642.17259-5-christian.koenig@amd.comReviewed-by:
-
Harshvardhan Jha authored
The list_for_each_entry() iterator, "connector" in this code, can never be NULL. If we exit the loop without finding the correct connector then "connector" points invalid memory that is an offset from the list head. This will eventually lead to memory corruption and presumably a kernel crash. Fixes: 9bd81acd ("gma500: Convert Oaktrail to work with new output handling") Signed-off-by:
Harshvardhan Jha <harshvardhan.jha@oracle.com> Signed-off-by:
-
- 08 Jul, 2021 3 commits
-
-
Beatriz Martins de Carvalho authored
Creating a vkms_config debugfs file in vkms_drv.c to get/track vkms config data, for the long-term plan of making vkms configurable and have multiple different instances. Reviewed-by:
Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com> Signed-off-by:
-
Christian König authored
Drivers also need to to sync to the exclusive fence when a shared one is present. Signed-off-by:
-
Christian König authored
As the name implies if testing all fences is requested we should indeed test all fences and not skip the exclusive one because we see shared ones. v2: fix logic once more Signed-off-by:
-
