* Setup hwif->dev in icside_setup().

* Use hwif->dev instead of state->dev in icside_build_sglist(),
  icside_dma_end(), icside_dma_start() and icside_dma_setup().

* Remove no longer needed 'dev' field from struct icside_state.

Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Setup hwif->dev in au_ide_probe().

* Use hwif->dev instead of ahwif->dev in auide_build_sglist(),
  auide_build_dmatable(), auide_dma_end() and auide_ddma_init().

* Remove no longer needed 'dev' field from _auide_hwif type.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Keep pointer to struct device instead of struct pci_dev in ide_hwif_t.

While on it:
* Use *dev->dma_mask instead of pci_dev->dma_mask in ide_toggle_bounce().

There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Use ide_destroy_dmatable() in:
* ide-dma.c::ide_build_dmatable()
* sgiioc4.c::sgiioc4_build_dma_table()
* pmac.c::pmac_ide_{build,destroy}_dmatable()

There should be no functionality changes caused by this patch.

v2:
* pmac.c build fix from Andrew Morton.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

do_rw_taskfile() has been fixed to check the return value
of ->dma_setup method so this BUG_ON() is no longer needed.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

'hwif->pci_dev && !hwif->pci_dev->vendor' condition is never true,
check for 'hwif->chipset != ide_pci' instead.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add IDE_HFLAG_NO_DSC host flag for hosts that doesn't support DSC overlap.

* Set it in aec62xx (for ATP850UF only) and hpt34x host drivers.

* Convert ide-tape device driver to check for IDE_HFLAG_NO_DSC flag.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Rename 'simplex_stat' variable to 'dma_stat' in ide_get_or_set_dma_base().

* Factor out code for forcing host out of "simplex" mode from
  ide_get_or_set_dma_base() to ide_pci_clear_simplex() helper.

* Add IDE_HFLAG_CLEAR_SIMPLEX host flag and set it in alim15x3 (for M5229),
  amd74xx (for AMD 7409), cmd64x (for CMD643), generic (for Netcell) and
  serverworks (for CSB5) host drivers.

* Make ide_get_or_set_dma_base() test for IDE_HFLAG_CLEAR_SIMPLEX host flag
  instead of checking dev->device (BTW the code was buggy because it didn't
  check for dev->vendor, luckily none of these PCI Device IDs was used by
  some other vendor for PCI IDE controller).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove no longer needed assertion from amd74xx_probe().

* Factor out cable detection for AMD7409 to amd7409_cable_detect() and for
  chipsets >= AMD7411 to amd7411_cable_detect().

* Use dev->vendor and dev->device instead of amd_config->udma_mask when
  selecting cable detection method and checking for broken FIFO support in
  init_chipset_amd74xx().

* Remove no longer needed AMD_BAD_FIFO define.

* Add 'swdma' parameter for setting .swdma_mask to DECLARE_AMD_DEV() macro.

* Add 'udma' parameter for setting .udma_mask to DECLARE_{AMD,NV}_DEV() macro.

* Keep a copy of a current amd74xx_chipsets[] entry in amd74xx_probe()
  in order to fix ->swdma_mask on early AMD7409 revisions and ->udma_mask
  on Serenade mainboards.

* Remove no longer needed fixups from init_chipset_amd74xx()
  and AMD_CHECK_{SWDMA,SERENADE} defines.

* Move printing banner message from init_chipset_amd74xx() to amd74xx_probe(),
  also remove incorrect comment while at it.

* Use hwif->ultra_mask instead of amd_config->udma_mask in amd_set_drive().

* Add 'udma_mask' argument to amd_set_speed() and pass UDMA mask from
  amd_set_drive() instead of using amd_config->udma_mask.

* Move amd_config->base from AMD_* defines to users of these defines and add
  0x40 the defined values.  Then add amd_offset() inline helper for selecting
  offset from 0x40 base (needed for nVidia controllers) and finally use it in
  amd_set_speed(), amd7411_cable_detect() and init_chipset_amd74xx() instead
  of amd_config->base.

* Remove no longer needed AMD_BAD_SWDMA define, ->{swdma,ultra}_mask setup
  from init_hwif_amd74xx(), amd_{config,chipset} variables and amd_ide_chips
  table.

* Fix init_chipset_amd74xx() comment.

* Bump driver version.

There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

According to http://marc.info/?l=linux-ide&m=114346138611631, the drivers must
always register 8 DMA ports with ide_setup_dma(), so its last argument is not
needed. While at it, kill some useless parens in that function...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The TRM-290 chip is *not* SFF-8038i compatible and therefore can *not* call
ide_setup_dma() -- fix this and also cleanup the code a bit...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There should be no functional changes from this.
Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

IDE core supports dumping raw identify data in hdparm friendly format now
so verbose identify dumping in ide-{floppy,tape}.c device drivers (done iff
IDE{FLOPPY,TAPE}_DEBUG_INFO is defined to '1' and it is '0' by default)
is no longer nedeed.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add ide_dump_identify() debug helper for dumping raw identify data in
  the hdparm friendly format (== the identify data can be extracted from
  dmesg output and passed to hdparm --Istdin).

* Dump identify data in ide-probe.c::do_identify() if DEBUG is enabled.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Bump driver version.

* Remove filename and stale TODO from comments.

* Add my copyrights.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add 'rw' parameter to cdrom_read_check_ireason(), make it handle
both read and write checking, rename it to ide_cd_check_ireason(),
finally remove no longer needed cdrom_write_check_ireason().

There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add handling of fs read/write requests to cdrom_nepwc_intr()
and remove no longer needed cdrom_rw_intr().

There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

In cdrom_newpc_intr():
* cleanup variables in the 'transfer data' loop

In cdrom_rw_intr():
* rename 'sectors_to_transfer' to 'thislen'
* rename 'this_transfer' to 'blen'
* keep number of bytes (instead of sectors) in 'thislen' and 'blen'
* call 'xferfunc' only once for 'blen'
* cache 'rq->buffer' in 'ptr' variable
* check for 'rq->bio' before setting 'ptr' and 'blen'
* check for 'ptr' instead of 'rq->current_nr_sectors'

There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Use the fact that for the first loop rq->current_nr_sectors is always
set and unify moving to the next buffer for read/write requests.

There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add handling of read requests to cdrom_start_write(), rename it
to cdrom_start_rw() and remove no longer needed cdrom_start_read().

There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add handling of write requests to cdrom_start_read_continuation(),
  rename it to cdrom_start_rw_cont() and remove no longer needed
  cdrom_start_write_cont().

* Remove redundant '(rq->sector & (sectors_per_frame - 1)' check.

There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add handling of read requests to cdrom_write_intr(), rename it
to cdrom_rw_intr() and remove no longer needed cdrom_read_intr().

There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This is a preparation for cdrom_read_intr() and cdrom_write_intr() merge.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add ide_cd_drain_data() and use it in cdrom_{buffer_sectors,read_intr}()
(as a nice side-effect this cuts 0.5kB of code from ide-cd.o).

There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add REQ_TYPE_{SENSE,ATA_PC} requests handling to cdrom_do_block_pc()
and remove cdrom_do_packet_command().

There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

cdrom_do_pc_continuation() is now identical to cdrom_do_newpc_cont()
so just always use the latter function.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add handling of REQ_TYPE_{SENSE,ATA_PC} requests to cdrom_newpc_intr()
(please note that these requests never have 'bio' attached to them
and they never use DMA), then remove no longer needed cdrom_pc_intr().

There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This is a preparation for cdrom_pc_intr() and cdrom_newpc_intr() merge.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This is a preparation for cdrom_pc_intr() and cdrom_newpc_intr() merge.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There is no need for it anylonger and ide_set_handler() complains
if ->handler is not NULL anyway.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* cdrom_prepare_request() -> ide_cd_init_rq()
* cdrom_queue_packet_command() -> ide_cd_queue_pc()
* cdrom_lockdoor() -> ide_cd_lockdoor()
* cdrom_read_toc() -> ide_cd_read_toc()
* cdrom_get_toc_entry() -> ide_cd_get_toc_entry()

This is a preparation to move code handling cdrom.c IOCTLs out of ide-cd.c.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This is a preparation to move code handling cdrom.c IOCTLs out of ide-cd.c.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move lba_to_msf() and msf_to_lba() to <linux/cdrom.h>
  (use 'u8' type instead of 'byte' while at it).

* Remove msf_to_lba() copy from drivers/cdrom/cdrom.c.
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>