Skip to content

L
linux
Switch branch/tag
  1. 11 Mar, 2023 12 commits
  3. 10 Mar, 2023 6 commits
  5. 09 Mar, 2023 12 commits
    • Linus Torvalds's avatar
      Merge tag 'net-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 44889ba5
      Linus Torvalds authored 
      Pull networking fixes from Paolo Abeni:
 "Including fixes from netfilter and bpf.

  Current release - regressions:

   - core: avoid skb end_offset change in __skb_unclone_keeptruesize()

   - sched:
      - act_connmark: handle errno on tcf_idr_check_alloc
      - flower: fix fl_change() error recovery path

   - ieee802154: prevent user from crashing the host

  Current release - new code bugs:

   - eth: bnxt_en: fix the double free during device removal

   - tools: ynl:
      - fix enum-as-flags in the generic CLI
      - fully inherit attrs in subsets
      - re-license uniformly under GPL-2.0 or BSD-3-clause

  Previous releases - regressions:

   - core: use indirect calls helpers for sk_exit_memory_pressure()

   - tls:
      - fix return value for async crypto
      - avoid hanging tasks on the tx_lock

   - eth: ice: copy last block omitted in ice_get_module_eeprom()

  Previous releases - always broken:

   - core: avoid double iput when sock_alloc_file fails

   - af_unix: fix struct pid leaks in OOB support

   - tls:
      - fix possible race condition
      - fix device-offloaded sendpage straddling records

   - bpf:
      - sockmap: fix an infinite loop error
      - test_run: fix &xdp_frame misplacement for LIVE_FRAMES
      - fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR

   - netfilter: tproxy: fix deadlock due to missing BH disable

   - phylib: get rid of unnecessary locking

   - eth: bgmac: fix *initial* chip reset to support BCM5358

   - eth: nfp: fix csum for ipsec offload

   - eth: mtk_eth_soc: fix RX data corruption issue

  Misc:

   - usb: qmi_wwan: add telit 0x1080 composition"

* tag 'net-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
  tools: ynl: fix enum-as-flags in the generic CLI
  tools: ynl: move the enum classes to shared code
  net: avoid double iput when sock_alloc_file fails
  af_unix: fix struct pid leaks in OOB support
  eth: fealnx: bring back this old driver
  net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC
  net: microchip: sparx5: fix deletion of existing DSCP mappings
  octeontx2-af: Unlock contexts in the queue context cache in case of fault detection
  net/smc: fix fallback failed while sendmsg with fastopen
  ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause
  mailmap: update entries for Stephen Hemminger
  mailmap: add entry for Maxim Mikityanskiy
  nfc: change order inside nfc_se_io error path
  ethernet: ice: avoid gcc-9 integer overflow warning
  ice: don't ignore return codes in VSI related code
  ice: Fix DSCP PFC TLV creation
  net: usb: qmi_wwan: add Telit 0x1080 composition
  net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990
  netfilter: conntrack: adopt safer max chain length
  net: tls: fix device-offloaded sendpage straddling records
  ...
      44889ba5
    • Linus Torvalds's avatar
      Merge tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid · 2653e3fe
      Linus Torvalds authored 
      Pull HID fixes from Benjamin Tissoires:

 - fix potential out of bound write of zeroes in HID core with a
   specially crafted uhid device (Lee Jones)

 - fix potential use-after-free in work function in intel-ish-hid (Reka
   Norman)

 - selftests config fixes (Benjamin Tissoires)

 - few device small fixes and support

* tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: intel-ish-hid: ipc: Fix potential use-after-free in work function
  HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse
  HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded
  selftest: hid: fix hid_bpf not set in config
  HID: uhid: Over-ride the default maximum data buffer value with our own
  HID: core: Provide new max_buffer_size attribute to over-ride the default
      2653e3fe
    • Linus Torvalds's avatar
      Merge tag 'm68k-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k · c70e9b8e
      Linus Torvalds authored 
      Pull m68k fixes from Geert Uytterhoeven:

 - Fix systems with memory at end of 32-bit address space

 - Fix initrd on systems where memory does not start at address zero

 - Fix 68030 handling of bus errors for addresses in exception tables

* tag 'm68k-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Only force 030 bus error if PC not in exception table
  m68k: mm: Move initrd phys_to_virt handling after paging_init()
  m68k: mm: Fix systems with memory at end of 32-bit address space
      c70e9b8e
    • Al Viro's avatar
      sh: sanitize the flags on sigreturn · 573b22cc
      Al Viro authored 
      We fetch %SR value from sigframe; it might have been modified by signal
handler, so we can't trust it with any bits that are not modifiable in
user mode.
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      573b22cc
    • Paolo Abeni's avatar
      Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue · 67eeadf2
      Paolo Abeni authored 
      Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-03-07 (ice)

This series contains updates to ice driver only.

Dave removes masking from pfcena field as it was incorrectly preventing
valid traffic classes from being enabled.

Michal resolves various smatch issues such as not propagating error
codes and returning 0 explicitly.

Arnd Bergmann resolves gcc-9 warning for integer overflow.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ethernet: ice: avoid gcc-9 integer overflow warning
  ice: don't ignore return codes in VSI related code
  ice: Fix DSCP PFC TLV creation
====================

Link: https://lore.kernel.org/r/20230307220714.3997294-1-anthony.l.nguyen@intel.comSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      67eeadf2
    • Jakub Kicinski's avatar
      Merge branch 'tools-ynl-fix-enum-as-flags-in-the-generic-cli' · 2d8cb0bf
      Jakub Kicinski authored 
      Jakub Kicinski says:

====================
tools: ynl: fix enum-as-flags in the generic CLI

The CLI needs to use proper classes when looking at Enum definitions
rather than interpreting the YAML spec ad-hoc, because we have more
than on format of the definition supported.
====================

Link: https://lore.kernel.org/r/20230308003923.445268-1-kuba@kernel.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      2d8cb0bf
    • Jakub Kicinski's avatar
      tools: ynl: fix enum-as-flags in the generic CLI · c311aaa7
      Jakub Kicinski authored 
      Lorenzo points out that the generic CLI is broken for the netdev
family. When I added the support for documentation of enums
(and sparse enums) the client script was not updated.
It expects the values in enum to be a list of names,
now it can also be a dict (YAML object).
Reported-by: default avatarLorenzo Bianconi <lorenzo@kernel.org>
Fixes: e4b48ed4 ("tools: ynl: add a completely generic client")
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      c311aaa7
    • Jakub Kicinski's avatar
      tools: ynl: move the enum classes to shared code · 6517a60b
      Jakub Kicinski authored 
      Move bulk of the EnumSet and EnumEntry code to shared
code for reuse by cli.
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      6517a60b
    • Thadeu Lima de Souza Cascardo's avatar
      net: avoid double iput when sock_alloc_file fails · 649c15c7
      Thadeu Lima de Souza Cascardo authored 
      When sock_alloc_file fails to allocate a file, it will call sock_release.
__sys_socket_file should then not call sock_release again, otherwise there
will be a double free.

[   89.319884] ------------[ cut here ]------------
[   89.320286] kernel BUG at fs/inode.c:1764!
[   89.320656] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[   89.321051] CPU: 7 PID: 125 Comm: iou-sqp-124 Not tainted 6.2.0+ #361
[   89.321535] RIP: 0010:iput+0x1ff/0x240
[   89.321808] Code: d1 83 e1 03 48 83 f9 02 75 09 48 81 fa 00 10 00 00 77 05 83 e2 01 75 1f 4c 89 ef e8 fb d2 ba 00 e9 80 fe ff ff c3 cc cc cc cc <0f> 0b 0f 0b e9 d0 fe ff ff 0f 0b eb 8d 49 8d b4 24 08 01 00 00 48
[   89.322760] RSP: 0018:ffffbdd60068bd50 EFLAGS: 00010202
[   89.323036] RAX: 0000000000000000 RBX: ffff9d7ad3cacac0 RCX: 0000000000001107
[   89.323412] RDX: 000000000003af00 RSI: 0000000000000000 RDI: ffff9d7ad3cacb40
[   89.323785] RBP: ffffbdd60068bd68 R08: ffffffffffffffff R09: ffffffffab606438
[   89.324157] R10: ffffffffacb3dfa0 R11: 6465686361657256 R12: ffff9d7ad3cacb40
[   89.324529] R13: 0000000080000001 R14: 0000000080000001 R15: 0000000000000002
[   89.324904] FS:  00007f7b28516740(0000) GS:ffff9d7aeb1c0000(0000) knlGS:0000000000000000
[   89.325328] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   89.325629] CR2: 00007f0af52e96c0 CR3: 0000000002a02006 CR4: 0000000000770ee0
[   89.326004] PKRU: 55555554
[   89.326161] Call Trace:
[   89.326298]  <TASK>
[   89.326419]  __sock_release+0xb5/0xc0
[   89.326632]  __sys_socket_file+0xb2/0xd0
[   89.326844]  io_socket+0x88/0x100
[   89.327039]  ? io_issue_sqe+0x6a/0x430
[   89.327258]  io_issue_sqe+0x67/0x430
[   89.327450]  io_submit_sqes+0x1fe/0x670
[   89.327661]  io_sq_thread+0x2e6/0x530
[   89.327859]  ? __pfx_autoremove_wake_function+0x10/0x10
[   89.328145]  ? __pfx_io_sq_thread+0x10/0x10
[   89.328367]  ret_from_fork+0x29/0x50
[   89.328576] RIP: 0033:0x0
[   89.328732] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[   89.329073] RSP: 002b:0000000000000000 EFLAGS: 00000202 ORIG_RAX: 00000000000001a9
[   89.329477] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00007f7b28637a3d
[   89.329845] RDX: 00007fff4e4318a8 RSI: 00007fff4e4318b0 RDI: 0000000000000400
[   89.330216] RBP: 00007fff4e431830 R08: 00007fff4e431711 R09: 00007fff4e4318b0
[   89.330584] R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff4e441b38
[   89.330950] R13: 0000563835e3e725 R14: 0000563835e40d10 R15: 00007f7b28784040
[   89.331318]  </TASK>
[   89.331441] Modules linked in:
[   89.331617] ---[ end trace 0000000000000000 ]---

Fixes: da214a47 ("net: add __sys_socket_file()")
Signed-off-by: default avatarThadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: default avatarJens Axboe <axboe@kernel.dk>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Reviewed-by: default avatarKuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230307173707.468744-1-cascardo@canonical.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      649c15c7
    • Eric Dumazet's avatar
      af_unix: fix struct pid leaks in OOB support · 2aab4b96
      Eric Dumazet authored 
      syzbot reported struct pid leak [1].

Issue is that queue_oob() calls maybe_add_creds() which potentially
holds a reference on a pid.

But skb->destructor is not set (either directly or by calling
unix_scm_to_skb())

This means that subsequent kfree_skb() or consume_skb() would leak
this reference.

In this fix, I chose to fully support scm even for the OOB message.

[1]
BUG: memory leak
unreferenced object 0xffff8881053e7f80 (size 128):
comm "syz-executor242", pid 5066, jiffies 4294946079 (age 13.220s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff812ae26a>] alloc_pid+0x6a/0x560 kernel/pid.c:180
[<ffffffff812718df>] copy_process+0x169f/0x26c0 kernel/fork.c:2285
[<ffffffff81272b37>] kernel_clone+0xf7/0x610 kernel/fork.c:2684
[<ffffffff812730cc>] __do_sys_clone+0x7c/0xb0 kernel/fork.c:2825
[<ffffffff849ad699>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff849ad699>] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
[<ffffffff84a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 314001f0 ("af_unix: Add OOB support")
Reported-by: syzbot+7699d9e5635c10253a27@syzkaller.appspotmail.com
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Cc: Rao Shoaib <rao.shoaib@oracle.com>
Reviewed-by: default avatarKuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230307164530.771896-1-edumazet@google.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      2aab4b96
    • Jakub Kicinski's avatar
      eth: fealnx: bring back this old driver · 8f148208
      Jakub Kicinski authored 
      This reverts commit d5e2d038.

We have a report of this chip being used on a

  SURECOM EP-320X-S 100/10M Ethernet PCI Adapter

which could still have been purchased in some parts
of the world 3 years ago.

Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217151
Fixes: d5e2d038 ("eth: fealnx: delete the driver for Myson MTD-800")
Link: https://lore.kernel.org/r/20230307171930.4008454-1-kuba@kernel.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      8f148208
    • Vladimir Oltean's avatar
      net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC · c8b8a3c6
      Vladimir Oltean authored 
      The MT7530 switch from the MT7621 SoC has 2 ports which can be set up as
internal: port 5 and 6. Arınç reports that the GMAC1 attached to port 5
receives corrupted frames, unless port 6 (attached to GMAC0) has been
brought up by the driver. This is true regardless of whether port 5 is
used as a user port or as a CPU port (carrying DSA tags).

Offline debugging (blind for me) which began in the linked thread showed
experimentally that the configuration done by the driver for port 6
contains a step which is needed by port 5 as well - the write to
CORE_GSWPLL_GRP2 (note that I've no idea as to what it does, apart from
the comment "Set core clock into 500Mhz"). Prints put by Arınç show that
the reset value of CORE_GSWPLL_GRP2 is RG_GSWPLL_POSDIV_500M(1) |
RG_GSWPLL_FBKDIV_500M(40) (0x128), both on the MCM MT7530 from the
MT7621 SoC, as well as on the standalone MT7530 from MT7623NI Bananapi
BPI-R2. Apparently, port 5 on the standalone MT7530 can work under both
values of the register, while on the MT7621 SoC it cannot.

The call path that triggers the register write is:

mt753x_phylink_mac_config() for port 6
-> mt753x_pad_setup()
   -> mt7530_pad_clk_setup()

so this fully explains the behavior noticed by Arınç, that bringing port
6 up is necessary.

The simplest fix for the problem is to extract the register writes which
are needed for both port 5 and 6 into a common mt7530_pll_setup()
function, which is called at mt7530_setup() time, immediately after
switch reset. We can argue that this mirrors the code layout introduced
in mt7531_setup() by commit 42bc4faf ("net: mt7531: only do PLL once
after the reset"), in that the PLL setup has the exact same positioning,
and further work to consolidate the separate setup() functions is not
hindered.

Testing confirms that:

- the slight reordering of writes to MT7530_P6ECR and to
  CORE_GSWPLL_GRP1 / CORE_GSWPLL_GRP2 introduced by this change does not
  appear to cause problems for the operation of port 6 on MT7621 and on
  MT7623 (where port 5 also always worked)

- packets sent through port 5 are not corrupted anymore, regardless of
  whether port 6 is enabled by phylink or not (or even present in the
  device tree)

My algorithm for determining the Fixes: tag is as follows. Testing shows
that some logic from mt7530_pad_clk_setup() is needed even for port 5.
Prior to commit ca366d6c ("net: dsa: mt7530: Convert to PHYLINK
API"), a call did exist for all phy_is_pseudo_fixed_link() ports - so
port 5 included. That commit replaced it with a temporary "Port 5 is not
supported!" comment, and the following commit 38f790a8 ("net: dsa:
mt7530: Add support for port 5") replaced that comment with a
configuration procedure in mt7530_setup_port5() which was insufficient
for port 5 to work. I'm laying the blame on the patch that claimed
support for port 5, although one would have also needed the change from
commit c3b8e079 ("net: dsa: mt7530: setup core clock even in TRGMII
mode") for the write to be performed completely independently from port
6's configuration.

Thanks go to Arınç for describing the problem, for debugging and for
testing.
Reported-by: default avatarArınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/netdev/f297c2c4-6e7c-57ac-2394-f6025d309b9d@arinc9.com/
Fixes: 38f790a8 ("net: dsa: mt7530: Add support for port 5")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: default avatarArınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230307155411.868573-1-vladimir.oltean@nxp.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      c8b8a3c6
  7. 08 Mar, 2023 6 commits
    • Linus Torvalds's avatar
      Merge tag 'fs_for_v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs · 6a98c9ca
      Linus Torvalds authored 
      Pull udf fixes from Jan Kara:
 "Fix bugs in UDF caused by the big pile of changes that went in during
  the merge window"

* tag 'fs_for_v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Warn if block mapping is done for in-ICB files
  udf: Fix reading of in-ICB files
  udf: Fix lost writes in udf_adinicb_writepage()
      6a98c9ca
    • Linus Torvalds's avatar
      Merge tag 'platform-drivers-x86-v6.3-2' of... · 55ee6646
      Linus Torvalds authored 
      Merge tag 'platform-drivers-x86-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "A small set of assorted bug and build/warning fixes"

* tag 'platform-drivers-x86-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform: mellanox: mlx-platform: Initialize shift variable to 0
  platform/x86: int3472: Add GPIOs to Surface Go 3 Board data
  platform/x86: ISST: Fix kernel documentation warnings
  platform: x86: MLX_PLATFORM: select REGMAP instead of depending on it
  platform: mellanox: select REGMAP instead of depending on it
  platform/x86/intel/tpmi: Fix double free reported by Smatch
  platform/x86: ISST: Increase range of valid mail box commands
  platform/x86: dell-ddv: Fix temperature scaling
  platform/x86: dell-ddv: Fix cache invalidation on resume
  platform/x86/amd: pmc: remove CONFIG_SUSPEND checks
      55ee6646
    • Linus Torvalds's avatar
      x86/resctl: fix scheduler confusion with 'current' · 7fef0997
      Linus Torvalds authored 
      The implementation of 'current' on x86 is very intentionally special: it
is a very common thing to look up, and it uses 'this_cpu_read_stable()'
to get the current thread pointer efficiently from per-cpu storage.

And the keyword in there is 'stable': the current thread pointer never
changes as far as a single thread is concerned.  Even if when a thread
is preempted, or moved to another CPU, or even across an explicit call
'schedule()' that thread will still have the same value for 'current'.

It is, after all, the kernel base pointer to thread-local storage.
That's why it's stable to begin with, but it's also why it's important
enough that we have that special 'this_cpu_read_stable()' access for it.

So this is all done very intentionally to allow the compiler to treat
'current' as a value that never visibly changes, so that the compiler
can do CSE and combine multiple different 'current' accesses into one.

However, there is obviously one very special situation when the
currently running thread does actually change: inside the scheduler
itself.

So the scheduler code paths are special, and do not have a 'current'
thread at all.  Instead there are _two_ threads: the previous and the
next thread - typically called 'prev' and 'next' (or prev_p/next_p)
internally.

So this is all actually quite straightforward and simple, and not all
that complicated.

Except for when you then have special code that is run in scheduler
context, that code then has to be aware that 'current' isn't really a
valid thing.  Did you mean 'prev'? Did you mean 'next'?

In fact, even if then look at the code, and you use 'current' after the
new value has been assigned to the percpu variable, we have explicitly
told the compiler that 'current' is magical and always stable.  So the
compiler is quite free to use an older (or newer) value of 'current',
and the actual assignment to the percpu storage is not relevant even if
it might look that way.

Which is exactly what happened in the resctl code, that blithely used
'current' in '__resctrl_sched_in()' when it really wanted the new
process state (as implied by the name: we're scheduling 'into' that new
resctl state).  And clang would end up just using the old thread pointer
value at least in some configurations.

This could have happened with gcc too, and purely depends on random
compiler details.  Clang just seems to have been more aggressive about
moving the read of the per-cpu current_task pointer around.

The fix is trivial: just make the resctl code adhere to the scheduler
rules of using the prev/next thread pointer explicitly, instead of using
'current' in a situation where it just wasn't valid.

That same code is then also used outside of the scheduler context (when
a thread resctl state is explicitly changed), and then we will just pass
in 'current' as that pointer, of course.  There is no ambiguity in that
case.

The fix may be trivial, but noticing and figuring out what went wrong
was not.  The credit for that goes to Stephane Eranian.
Reported-by: default avatarStephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/lkml/20230303231133.1486085-1-eranian@google.com/
Link: https://lore.kernel.org/lkml/alpine.LFD.2.01.0908011214330.3304@localhost.localdomain/Reviewed-by: default avatarNick Desaulniers <ndesaulniers@google.com>
Tested-by: default avatarTony Luck <tony.luck@intel.com>
Tested-by: default avatarStephane Eranian <eranian@google.com>
Tested-by: default avatarBabu Moger <babu.moger@amd.com>
Cc: stable@kernel.org
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      7fef0997
    • Daniel Machon's avatar
      net: microchip: sparx5: fix deletion of existing DSCP mappings · cdd28833
      Daniel Machon authored 
      Fix deletion of existing DSCP mappings in the APP table.

Adding and deleting DSCP entries are replicated per-port, since the
mapping table is global for all ports in the chip. Whenever a mapping
for a DSCP value already exists, the old mapping is deleted first.
However, it is only deleted for the specified port. Fix this by calling
sparx5_dcb_ieee_delapp() instead of dcb_ieee_delapp() as it ought to be.

Reproduce:

// Map and remap DSCP value 63
$ dcb app add dev eth0 dscp-prio 63:1
$ dcb app add dev eth0 dscp-prio 63:2

$ dcb app show dev eth0 dscp-prio
dscp-prio 63:2

$ dcb app show dev eth1 dscp-prio
dscp-prio 63:1 63:2 <-- 63:1 should not be there

Fixes: 8dcf69a6 ("net: microchip: sparx5: add support for offloading dscp table")
Signed-off-by: default avatarDaniel Machon <daniel.machon@microchip.com>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cdd28833
    • Suman Ghosh's avatar
      octeontx2-af: Unlock contexts in the queue context cache in case of fault detection · ea9dd2e5
      Suman Ghosh authored 
      NDC caches contexts of frequently used queue's (Rx and Tx queues)
contexts. Due to a HW errata when NDC detects fault/poision while
accessing contexts it could go into an illegal state where a cache
line could get locked forever. To makesure all cache lines in NDC
are available for optimum performance upon fault/lockerror/posion
errors scan through all cache lines in NDC and clear the lock bit.

Fixes: 4a3581cd ("octeontx2-af: NPA AQ instruction enqueue support")
Signed-off-by: default avatarSuman Ghosh <sumang@marvell.com>
Signed-off-by: default avatarSunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: default avatarSai Krishna <saikrishnag@marvell.com>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ea9dd2e5
    • D. Wythe's avatar
      net/smc: fix fallback failed while sendmsg with fastopen · ce7ca794
      D. Wythe authored 
      Before determining whether the msg has unsupported options, it has been
prematurely terminated by the wrong status check.

For the application, the general usages of MSG_FASTOPEN likes

fd = socket(...)
/* rather than connect */
sendto(fd, data, len, MSG_FASTOPEN)

Hence, We need to check the flag before state check, because the sock
state here is always SMC_INIT when applications tries MSG_FASTOPEN.
Once we found unsupported options, fallback it to TCP.

Fixes: ee9dfbef ("net/smc: handle sockopts forcing fallback")
Signed-off-by: default avatarD. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: default avatarSimon Horman <simon.horman@corigine.com>

v2 -> v1: Optimize code style
Reviewed-by: default avatarTony Lu <tonylu@linux.alibaba.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ce7ca794
  9. 07 Mar, 2023 4 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7