- 04 Nov, 2022 5 commits
-
-
Peng Ju Zhou authored
Remove unnecessary register program in SRIOV Signed-off-by:
Peng Ju Zhou <PengJu.Zhou@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Yiqing Yao authored
[why] Start from soc21, CP does not support MCBP, so disable it. [how] Used amgpu_mcbp flag alone instead of checking if is in SRIOV to enable/disable MCBP. Only set flag to enable on asic_type prior to soc21 in SRIOV. Signed-off-by:
Yiqing Yao <yiqing.yao@amd.com> Reviewed-by:
-
Yiqing Yao authored
Use virt_init_setting instead of per ip version setting. Signed-off-by:
-
Graham Sider authored
Hang on MES timeout if halt_if_hws_hang is set to 1. Signed-off-by:
Graham Sider <Graham.Sider@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Jay Cornwall authored
With corresponding FW change fixes issue where triggering CWSR on a workgroup with waves in s_barrier wouldn't lead to a back-off and therefore cause a hang. Signed-off-by:
Jay Cornwall <jay.cornwall@amd.com> Tested-by:
Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Acked-by:
-
- 01 Nov, 2022 25 commits
-
-
Jiri Slaby (SUSE) authored
rn_vbios_smu_set_dcn_low_power_state() produces a valid warning with gcc-13: drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.c:237:6: error: conflicting types for 'rn_vbios_smu_set_dcn_low_power_state' due to enum/integer mismatch; have 'void(struct clk_mgr_internal *, enum dcn_pwr_state)' drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr_vbios_smu.h:36:6: note: previous declaration of 'rn_vbios_smu_set_dcn_low_power_state' with type 'void(struct clk_mgr_internal *, int)' I.e. the type of the 2nd parameter of rn_vbios_smu_set_dcn_low_power_state() in the declaration is int, while the definition spells enum dcn_pwr_state. Synchronize them to the latter (and add a forward enum declaration). Cc: Martin Liska <mliska@suse.cz> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Jiri Slaby (SUSE) <jirislaby@kernel.org> Signed-off-by:
-
Aric Cyr authored
DC version 3.2.210 brings along the following: - Investigate tool reported FCLK P-state deviations - Fix null pointer issues found in emulation - Add DSC delay factor workaround - Round up DST_after_scaler to nearest int - Use forced DSC bpp in DML - Fix DCN32 DSC delay calculation - Add a debug option HBR2CP2520 over TPS4 - Stop waiting for vblank during pipe programming - Modify checks to enable TPS3 pattern when required - Remove rate check from pixel rate divider update - Check validation passed after applying pipe split changes - Update DML formula - Don't enable ODM + MPO - Include virtual signal to set k1 and k2 values - Reinit DPG when exiting dynamic ODM Acked-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Mark Broadworth <mark.broadworth@amd.com> Signed-off-by:
-
Nevenko Stupar authored
[Why] Fix for some of the tool reported modes for FCLK P-state deviations and UCLK P-state deviations that are coming from DSC terms and/or Scaling terms causing MinActiveFCLKChangeLatencySupported and MaxActiveDRAMClockChangeLatencySupported incorrectly calculated in DML for these configurations. Reviewed-by:
Chaitanya Dhere <Chaitanya.Dhere@amd.com> Acked-by:
Jasdeep Dhillon <jdhillon@amd.com> Acked-by:
Nevenko Stupar <Nevenko.Stupar@amd.com> Tested-by:
-
Charlene Liu authored
[why] fix null point issues found in emulation Reviewed-by:
Chris Park <Chris.Park@amd.com> Acked-by:
Charlene Liu <Charlene.Liu@amd.com> Tested-by:
-
George Shen authored
[Why] Certain 4K high refresh rate modes requiring DSC are exhibiting top of screen underflow corruption. Increasing the DSC delay by a factor of 6 percent stops the underflow for most use cases. [How] Multiply DSC delay requirement in DML by a factor. Add debug option to make this DSC delay factor configurable. Reviewed-by:
Alvin Lee <Alvin.Lee2@amd.com> Acked-by:
George Shen <george.shen@amd.com> Tested-by:
-
George Shen authored
[Why] The DST_after_scaler value that DML spreadsheet outputs is generally the driver value round up to the nearest int. Reviewed-by:
-
George Shen authored
[Why] DSC config is calculated separately from DML calculations. DML should use these separately calculated DSC params. The issue is that the calculated bpp is not properly propagated into DML. [How] Correctly used forced_bpp value in DML. Reviewed-by:
-
George Shen authored
[Why] DCN32 DSC delay calculation had an unintentional integer division, resulting in a mismatch against the DML spreadsheet. [How] Cast numerator to double before performing the division. Reviewed-by:
-
Anthony Koo authored
- Add flag as a status read back that indicates back to back flips detected during psr. Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Tested-by:
-
Leo Chen authored
[Why & How] There are cases when we may need to override the hardcoded TPS4 test pattern. Added parameters and config option to be able to allow this. Reviewed-by:
Leo Chen <sancchen@amd.com> Tested-by:
-
Martin Leung authored
[why and how] This line was originally removed for a compliance issue, but then reverted as it caused a fringe underflow case. However, the addition of this line caused a underflow regression when subVP is on, and it needs to be removed again. We plan to fix subvp underflow and then re-add in this line. After that, we will investigate what to do next for the compliance issue. Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Tested-by:
-
Iswara Nagulendran authored
[HOW&WHY] Checking if both DSC and FEC supported from sink and source before going with TPS3 pattern during link training. Reviewed-by:
Iswara Nagulendran <iswara.nagulendran@amd.com> Tested-by:
-
Taimur Hassan authored
[Why] This check is not needed, and can cause CRC mismatch. [How] Remove check and early exit from divider update. Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Taimur Hassan <Syed.Hassan@amd.com> Tested-by:
-
Dillon Varone authored
[WHY?] Validation can fail for configurations that were previously supported, by only changing parameters such as the DET allocations, which is currently unexpected. [HOW?] Add a check that validation passes after applying pipe split related changes. Reviewed-by:
Dillon Varone <Dillon.Varone@amd.com> Tested-by:
-
Charlene Liu authored
[why] This is to update SW DML implementation. Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by:
Ariel Bernstein <Eric.Bernstein@amd.com> Acked-by:
-
Alvin Lee authored
[Description] Driver doesn't support ODM + MPO Reviewed-by:
-
Eric Bernstein authored
Reviewed-by:
-
Dillon Varone authored
[WHY] DPG must be returned to initialized state when pipe is disabled. [HOW] Reinit DPG on unused pipes when exiting dynamic ODM. Reviewed-by:
-
Hamza Mahfooz authored
As of commit 09a5df6c ("drm/amd/display: Fix multi-display support for idle opt workqueue"), vblank_lock is no longer being used. So, don't init it in amdgpu_dm_init() and remove it from struct amdgpu_display_manager. Reviewed-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Ma Jun authored
kfd_topology_device->cache_count is not used by other fucntions, so remove it. Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Reviewed-by:
-
Yifan Zha authored
[Why] gfxhub_v3_0_3 system aperture registers are removed from RLCG register access range. [How] Skip access gfxhub_v3_0_3 system aperture registers under SRIOV VF. These registers will be programmed on host side. Signed-off-by:
Yifan Zha <Yifan.Zha@amd.com> Acked-by:
-
Yifan Zha authored
[Why] SDMA0_F32_CNTL is a PF_only regitser which will be blocked by L1. RLCG will not program the register as well. [How] Skip to program SDMA0_F32_CNTL under SRIOV VF. Signed-off-by:
-
Yifan Zha authored
[Why] GRBM_CNTL is a PF_only register on gfx_v11. RLCG interface will return "out of range" under SRIOV VF. [How] Skip access GRBM_CNTL under gfx_v11 SRIOV VF. Signed-off-by:
-
Gavin Wan authored
The recent change brought a bug on SRIOV envrionment. It caused unloading amdgpu failed on Guest VM. The reason is that the VF FLR was requested while unloading amdgpu driver, but the VF FLR of SRIOV sequence is wrong while removing PCI device. For SRIOV, the guest driver should not trigger the whole XGMI hive to do the reset. Host driver control how the device been reset. Fixes: f5c7e779 ("drm/amdgpu: Adjust removal control flow for smu v13_0_2") Acked-by:
Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by:
Gavin Wan <Gavin.Wan@amd.com> Signed-off-by:
-
Candice Li authored
v1: Support gfx ras feature enablement for gfx v11_0_3. v2: Update function name and error message. Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
- 27 Oct, 2022 10 commits
-
-
Jiapeng Chong authored
No functional modification involved. drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:615: warning: expecting prototype for setup_subvp_dmub_command(). Prototype was for populate_subvp_cmd_pipe_info() instead. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2587Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Jiapeng Chong authored
This symbol is not used outside of dc_link_dp.c, so marks it static. drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:5230:16: warning: no previous prototype for function 'wake_up_aux_channel'. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2581Reported-by:
-
Mukul Joshi authored
Cleanup kfd_dev struct by removing ddev and pdev as both drm_device and pci_dev can be fetched from amdgpu_device. Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Tested-by:
Amber Lin <Amber.Lin@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Graham Sider authored
Temporary workaround to fix issues observed in some compute applications when GFXOFF is enabled on GFX11. Signed-off-by:
-
Mario Limonciello authored
If a system does not have swap and memory is under 100% usage, amdgpu will fail to evict resources. Currently the suspend carries on proceeding to reset the GPU: ``` [drm] evicting device resources failed [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <vcn_v3_0> failed -12 [drm] free PSP TMR buffer [TTM] Failed allocating page table [drm] evicting device resources failed amdgpu 0000:03:00.0: amdgpu: MODE1 reset amdgpu 0000:03:00.0: amdgpu: GPU mode1 reset amdgpu 0000:03:00.0: amdgpu: GPU smu mode1 reset ``` At this point if the suspend actually succeeded I think that amdgpu would have recovered because the GPU would have power cut off and restored. However the kernel fails to continue the suspend from the memory pressure and amdgpu fails to run the "resume" from the aborted suspend. ``` ACPI: PM: Preparing to enter system sleep state S3 SLUB: Unable to allocate memory on node -1, gfp=0xdc0(GFP_KERNEL|__GFP_ZERO) cache: Acpi-State, object size: 80, buffer size: 80, default order: 0, min order: 0 node 0: slabs: 22, objs: 1122, free: 0 ACPI Error: AE_NO_MEMORY, Could not update object reference count (20210730/utdelete-651) [drm:psp_hw_start [amdgpu]] *ERROR* PSP load kdb failed! [drm:psp_resume [amdgpu]] *ERROR* PSP resume failed [drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* resume of IP block <psp> failed -62 amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_resume failed (-62). PM: dpm_run_callback(): pci_pm_resume+0x0/0x100 returns -62 amdgpu 0000:03:00.0: PM: failed to resume async: error -62 ``` To avoid this series of unfortunate events, fail amdgpu's suspend when the memory eviction fails. This will let the system gracefully recover and the user can try suspend again when the memory pressure is relieved. Reported-by: post@davidak.de Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2223Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
-
Hamza Mahfooz authored
This reverts commit 55eea8ef. This quirk is now handled in the DRM core, so we can drop all of the internal code that was added to handle it. Reviewed-by:
-
Hamza Mahfooz authored
Since, the quirk is handled in the DRM core now, we can use that value instead of the internal value. Reviewed-by:
-
Hamza Mahfooz authored
The LG 27GP950 and LG 27GN950 have visible display corruption when trying to use 10bpc modes. So, to fix this, cap their maximum DSC target bitrate to 15bpp. Suggested-by:
Roman Li <roman.li@amd.com> Reviewed-by:
-
Candice Li authored
1. Update EEPROM_I2C_MADDR_SMU_13_0_0 to EEPROM_I2C_MADDR_54H 2. Add EEPROM I2C address support for smu v13_0_0 and v13_0_10. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
Candice Li authored
Enable RAS EEPROM support for smu v13_0_0 and v13_0_10. Signed-off-by:
-
