Add support for deduplication split BTFs. When deduplicating split BTF, base
BTF is considered to be immutable and can't be modified or adjusted. 99% of
BTF deduplication logic is left intact (module some type numbering adjustments).
There are only two differences.

First, each type in base BTF gets hashed (expect VAR and DATASEC, of course,
those are always considered to be self-canonical instances) and added into
a table of canonical table candidates. Hashing is a shallow, fast operation,
so mostly eliminates the overhead of having entire base BTF to be a part of
BTF dedup.

Second difference is very critical and subtle. While deduplicating split BTF
types, it is possible to discover that one of immutable base BTF BTF_KIND_FWD
types can and should be resolved to a full STRUCT/UNION type from the split
BTF part.  This is, obviously, can't happen because we can't modify the base
BTF types anymore. So because of that, any type in split BTF that directly or
indirectly references that newly-to-be-resolved FWD type can't be considered
to be equivalent to the corresponding canonical types in base BTF, because
that would result in a loss of type resolution information. So in such case,
split BTF types will be deduplicated separately and will cause some
duplication of type information, which is unavoidable.

With those two changes, the rest of the algorithm manages to deduplicate split
BTF correctly, pointing all the duplicates to their canonical counter-parts in
base BTF, but also is deduplicating whatever unique types are present in split
BTF on their own.

Also, theoretically, split BTF after deduplication could end up with either
empty type section or empty string section. This is handled by libbpf
correctly in one of previous patches in the series.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-9-andrii@kernel.org

Make data section layout checks stricter, disallowing overlap of types and
strings data.

Additionally, allow BTFs with no type data. There is nothing inherently wrong
with having BTF with no types (put potentially with some strings). This could
be a situation with kernel module BTFs, if module doesn't introduce any new
type information.

Also fix invalid offset alignment check for btf->hdr->type_off.

Fixes: 8a138aed ("bpf: btf: Add BTF support to libbpf")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-8-andrii@kernel.org

Add re-usable btf_helpers.{c,h} to provide BTF-related testing routines. Start
with adding a raw BTF dumping helpers.

Raw BTF dump is the most succinct and at the same time a very human-friendly
way to validate exact contents of BTF types. Cross-validate raw BTF dump and
writable BTF in a single selftest. Raw type dump checks also serve as a good
self-documentation.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-7-andrii@kernel.org

Add selftest validating ability to programmatically generate and then dump
split BTF.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-6-andrii@kernel.org

Support split BTF operation, in which one BTF (base BTF) provides basic set of
types and strings, while another one (split BTF) builds on top of base's types
and strings and adds its own new types and strings. From API standpoint, the
fact that the split BTF is built on top of the base BTF is transparent.

Type numeration is transparent. If the base BTF had last type ID #N, then all
types in the split BTF start at type ID N+1. Any type in split BTF can
reference base BTF types, but not vice versa. Programmatically construction of
a split BTF on top of a base BTF is supported: one can create an empty split
BTF with btf__new_empty_split() and pass base BTF as an input, or pass raw
binary data to btf__new_split(), or use btf__parse_xxx_split() variants to get
initial set of split types/strings from the ELF file with .BTF section.

String offsets are similarly transparent and are a logical continuation of
base BTF's strings. When building BTF programmatically and adding a new string
(explicitly with btf__add_str() or implicitly through appending new
types/members), string-to-be-added would first be looked up from the base
BTF's string section and re-used if it's there. If not, it will be looked up
and/or added to the split BTF string section. Similarly to type IDs, types in
split BTF can refer to strings from base BTF absolutely transparently (but not
vice versa, of course, because base BTF doesn't "know" about existence of
split BTF).

Internal type index is slightly adjusted to be zero-indexed, ignoring a fake
[0] VOID type. This allows to handle split/base BTF type lookups transparently
by using btf->start_id type ID offset, which is always 1 for base/non-split
BTF and equals btf__get_nr_types(base_btf) + 1 for the split BTF.

BTF deduplication is not yet supported for split BTF and support for it will
be added in separate patch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-5-andrii@kernel.org

Revamp BTF dedup's string deduplication to match the approach of writable BTF
string management. This allows to transfer deduplicated strings index back to
BTF object after deduplication without expensive extra memory copying and hash
map re-construction. It also simplifies the code and speeds it up, because
hashmap-based string deduplication is faster than sort + unique approach.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-4-andrii@kernel.org

Remove the requirement of a strictly exact string section contents. This used
to be true when string deduplication was done through sorting, but with string
dedup done through hash table, it's no longer true. So relax test harness to
relax strings checks and, consequently, type checks, which now don't have to
have exactly the same string offsets.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-3-andrii@kernel.org

Factor out commiting of appended type data. Also extract fetching the very
last type in the BTF (to append members to). These two operations are common
across many APIs and will be easier to refactor with split BTF, if they are
extracted into a single place.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-2-andrii@kernel.org

Alexander Duyck says:

====================
Move the test functionality from test_tcpbpf_user into the test_progs
framework so that it will be run any time the test_progs framework is run.
This will help to prevent future test escapes as the individual tests, such
as test_tcpbpf_user, are less likely to be run by developers and CI
tests.

As a part of moving it over the series goes through and updates the code to
make use of the existing APIs included in the test_progs framework. This is
meant to simplify and streamline the test code and avoid duplication of
effort.

v2: Dropped test_tcpbpf_user from .gitignore
    Replaced CHECK_FAIL calls with CHECK calls
    Minimized changes in patch 1 when moving the file
    Updated stg mail command line to display renames in submission
    Added shutdown logic to end of run_test function to guarantee close
    Added patch that replaces the two maps with use of global variables
v3: Left err at -1 while we are performing send/recv calls w/ data
    Drop extra labels from test_tcpbpf_user in favor of keeping err label
    Dropped redundant zero init for tcpbpf_globals result and key
    Dropped replacing of "printf(" with "fprintf(stderr, "
    Fixed error in use of ASSERT_OK_PTR which was skipping of run_test
    Replaced "{ 0 }" with "{}" in init of global in test_tcpbpf_kern.c
    Added "Acked-by" from Martin KaiFai Lau and Andrii Nakryiko
====================
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Use global variables instead of global_map and sockopt_results_map to track
test data. Doing this greatly simplifies the code as there is not need to
take the extra steps of updating the maps or looking up elements.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/160443931900.1086697.6588858453575682351.stgit@localhost.localdomain

Update tcpbpf_user.c to make use of the BPF skeleton. Doing this we can
simplify test_tcpbpf_user and reduce the overhead involved in setting up
the test.

In addition we can clean up the remaining bits such as the one remaining
CHECK_FAIL at the end of test_tcpbpf_user so that the function only makes
use of CHECK as needed.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/160443931155.1086697.17869006617113525162.stgit@localhost.localdomain

There is already logic in test_progs.h for asserting that a value is
expected to be another value. So instead of reinventing it we should just
make use of ASSERT_EQ in tcpbpf_user.c. This will allow for better
debugging and integrates much more closely with the test_progs framework.

In addition we can refactor the code a bit to merge together the two
verify functions and tie them together into a single function. Doing this
helps to clean the code up a bit and makes it more readable as all the
verification is now done in one function.

Lastly we can relocate the verification to the end of the run_test since it
is logically part of the test itself. With this we can drop the need for a
return value from run_test since verification becomes the last step of the
call and then immediately following is the tear down of the test setup.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/160443930408.1086697.16101205859962113000.stgit@localhost.localdomain

Drop the tcp_client/server.py files in favor of using a client and server
thread within the test case. Specifically we spawn a new thread to play the
role of the server, and the main testing thread plays the role of client.

Add logic to the end of the run_test function to guarantee that the sockets
are closed when we begin verifying results.

Doing this we are able to reduce overhead since we don't have two python
workers possibly floating around. In addition we don't have to worry about
synchronization issues and as such the retry loop waiting for the threads
to close the sockets can be dropped as we will have already closed the
sockets in the local executable and synchronized the server thread.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/160443929638.1086697.2430242340980315521.stgit@localhost.localdomain

Recently a bug was missed due to the fact that test_tcpbpf_user is not a
part of test_progs. In order to prevent similar issues in the future move
the test functionality into test_progs. By doing this we can make certain
that it is a part of standard testing and will not be overlooked.

As a part of moving the functionality into test_progs it is necessary to
integrate with the test_progs framework and to drop any redundant code.
This patch:
1. Cleans up the include headers
2. Dropped a duplicate definition of bpf_find_map
3. Switched over to using test_progs specific cgroup functions
4. Renamed main to test_tcpbpf_user
5. Dropped return value in favor of CHECK_FAIL to check for errors

The general idea is that I wanted to keep the changes as small as possible
while moving the file into the test_progs framework. The follow-on patches
are meant to clean up the remaining issues such as the use of CHECK_FAIL.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/160443928881.1086697.17661359319919165370.stgit@localhost.localdomain

syzbot was able to trigger a use-after-free in htab_map_alloc() [1]

htab_map_alloc() lacks a call to lockdep_unregister_key() in its error path.

lockdep_register_key() and lockdep_unregister_key() can not fail,
it seems better to use them right after htab allocation and before
htab freeing, avoiding more goto/labels in htab_map_alloc()

[1]
BUG: KASAN: use-after-free in lockdep_register_key+0x356/0x3e0 kernel/locking/lockdep.c:1182
Read of size 8 at addr ffff88805fa67ad8 by task syz-executor.3/2356

CPU: 1 PID: 2356 Comm: syz-executor.3 Not tainted 5.9.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x107/0x163 lib/dump_stack.c:118
 print_address_description.constprop.0.cold+0xae/0x4c8 mm/kasan/report.c:385
 __kasan_report mm/kasan/report.c:545 [inline]
 kasan_report.cold+0x1f/0x37 mm/kasan/report.c:562
 lockdep_register_key+0x356/0x3e0 kernel/locking/lockdep.c:1182
 htab_init_buckets kernel/bpf/hashtab.c:144 [inline]
 htab_map_alloc+0x6c5/0x14a0 kernel/bpf/hashtab.c:521
 find_and_alloc_map kernel/bpf/syscall.c:122 [inline]
 map_create kernel/bpf/syscall.c:825 [inline]
 __do_sys_bpf+0xa80/0x5180 kernel/bpf/syscall.c:4381
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45deb9
Code: 0d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f0eafee1c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000141
RAX: ffffffffffffffda RBX: 0000000000001a00 RCX: 000000000045deb9
RDX: 0000000000000040 RSI: 0000000020000040 RDI: 405a020000000000
RBP: 000000000118bf60 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118bf2c
R13: 00007ffd3cf9eabf R14: 00007f0eafee29c0 R15: 000000000118bf2c

Allocated by task 2053:
 kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
 kasan_set_track mm/kasan/common.c:56 [inline]
 __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:461
 kmalloc include/linux/slab.h:554 [inline]
 kzalloc include/linux/slab.h:666 [inline]
 htab_map_alloc+0xdf/0x14a0 kernel/bpf/hashtab.c:454
 find_and_alloc_map kernel/bpf/syscall.c:122 [inline]
 map_create kernel/bpf/syscall.c:825 [inline]
 __do_sys_bpf+0xa80/0x5180 kernel/bpf/syscall.c:4381
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 2053:
 kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56
 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355
 __kasan_slab_free+0x102/0x140 mm/kasan/common.c:422
 slab_free_hook mm/slub.c:1544 [inline]
 slab_free_freelist_hook+0x5d/0x150 mm/slub.c:1577
 slab_free mm/slub.c:3142 [inline]
 kfree+0xdb/0x360 mm/slub.c:4124
 htab_map_alloc+0x3f9/0x14a0 kernel/bpf/hashtab.c:549
 find_and_alloc_map kernel/bpf/syscall.c:122 [inline]
 map_create kernel/bpf/syscall.c:825 [inline]
 __do_sys_bpf+0xa80/0x5180 kernel/bpf/syscall.c:4381
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

The buggy address belongs to the object at ffff88805fa67800
 which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 728 bytes inside of
 1024-byte region [ffff88805fa67800, ffff88805fa67c00)
The buggy address belongs to the page:
page:000000003c5582c4 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5fa60
head:000000003c5582c4 order:3 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head)
raw: 00fff00000010200 ffffea0000bc1200 0000000200000002 ffff888010041140
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88805fa67980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88805fa67a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                    ^
 ffff88805fa67b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88805fa67b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: c50eb518 ("bpf: Use separate lockdep class for each hashtab")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201102114100.3103180-1-eric.dumazet@gmail.com

Song Liu says:

====================
LOCKDEP NMI warning highlighted potential deadlock of hashtab in NMI
context:

[   74.828971] ================================
[   74.828972] WARNING: inconsistent lock state
[   74.828973] 5.9.0-rc8+ #275 Not tainted
[   74.828974] --------------------------------
[   74.828975] inconsistent {INITIAL USE} -> {IN-NMI} usage.
[   74.828976] taskset/1174 [HC2[2]:SC0[0]:HE0:SE1] takes:
[...]
[   74.828999]  Possible unsafe locking scenario:
[   74.828999]
[   74.829000]        CPU0
[   74.829001]        ----
[   74.829001]   lock(&htab->buckets[i].raw_lock);
[   74.829003]   <Interrupt>
[   74.829004]     lock(&htab->buckets[i].raw_lock);

Please refer to patch 1/2 for full trace.

This warning is a false alert, as "INITIAL USE" and "IN-NMI" in the tests
are from different hashtab. On the other hand, in theory, it is possible
to deadlock when a hashtab is access from both non-NMI and NMI context.
Patch 1/2 fixes this false alert by assigning separate lockdep class to
each hashtab. Patch 2/2 introduces map_locked counters, which is similar to
bpf_prog_active counter, to avoid hashtab deadlock in NMI context.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

If a hashtab is accessed in both non-NMI and NMI context, the system may
deadlock on bucket->lock. Fix this issue with percpu counter map_locked.
map_locked rejects concurrent access to the same bucket from the same CPU.
To reduce memory overhead, map_locked is not added per bucket. Instead,
8 percpu counters are added to each hashtab. buckets are assigned to these
counters based on the lower bits of its hash.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201029071925.3103400-3-songliubraving@fb.com

If a hashtab is accessed in both NMI and non-NMI contexts, it may cause
deadlock in bucket->lock. LOCKDEP NMI warning highlighted this issue:

./test_progs -t stacktrace

[   74.828970]
[   74.828971] ================================
[   74.828972] WARNING: inconsistent lock state
[   74.828973] 5.9.0-rc8+ #275 Not tainted
[   74.828974] --------------------------------
[   74.828975] inconsistent {INITIAL USE} -> {IN-NMI} usage.
[   74.828976] taskset/1174 [HC2[2]:SC0[0]:HE0:SE1] takes:
[   74.828977] ffffc90000ee96b0 (&htab->buckets[i].raw_lock){....}-{2:2}, at: htab_map_update_elem+0x271/0x5a0
[   74.828981] {INITIAL USE} state was registered at:
[   74.828982]   lock_acquire+0x137/0x510
[   74.828983]   _raw_spin_lock_irqsave+0x43/0x90
[   74.828984]   htab_map_update_elem+0x271/0x5a0
[   74.828984]   0xffffffffa0040b34
[   74.828985]   trace_call_bpf+0x159/0x310
[   74.828986]   perf_trace_run_bpf_submit+0x5f/0xd0
[   74.828987]   perf_trace_urandom_read+0x1be/0x220
[   74.828988]   urandom_read_nowarn.isra.0+0x26f/0x380
[   74.828989]   vfs_read+0xf8/0x280
[   74.828989]   ksys_read+0xc9/0x160
[   74.828990]   do_syscall_64+0x33/0x40
[   74.828991]   entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   74.828992] irq event stamp: 1766
[   74.828993] hardirqs last  enabled at (1765): [<ffffffff82800ace>] asm_exc_page_fault+0x1e/0x30
[   74.828994] hardirqs last disabled at (1766): [<ffffffff8267df87>] irqentry_enter+0x37/0x60
[   74.828995] softirqs last  enabled at (856): [<ffffffff81043e7c>] fpu__clear+0xac/0x120
[   74.828996] softirqs last disabled at (854): [<ffffffff81043df0>] fpu__clear+0x20/0x120
[   74.828997]
[   74.828998] other info that might help us debug this:
[   74.828999]  Possible unsafe locking scenario:
[   74.828999]
[   74.829000]        CPU0
[   74.829001]        ----
[   74.829001]   lock(&htab->buckets[i].raw_lock);
[   74.829003]   <Interrupt>
[   74.829004]     lock(&htab->buckets[i].raw_lock);
[   74.829006]
[   74.829006]  *** DEADLOCK ***
[   74.829007]
[   74.829008] 1 lock held by taskset/1174:
[   74.829008]  #0: ffff8883ec3fd020 (&cpuctx_lock){-...}-{2:2}, at: perf_event_task_tick+0x101/0x650
[   74.829012]
[   74.829013] stack backtrace:
[   74.829014] CPU: 0 PID: 1174 Comm: taskset Not tainted 5.9.0-rc8+ #275
[   74.829015] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
[   74.829016] Call Trace:
[   74.829016]  <NMI>
[   74.829017]  dump_stack+0x9a/0xd0
[   74.829018]  lock_acquire+0x461/0x510
[   74.829019]  ? lock_release+0x6b0/0x6b0
[   74.829020]  ? stack_map_get_build_id_offset+0x45e/0x800
[   74.829021]  ? htab_map_update_elem+0x271/0x5a0
[   74.829022]  ? rcu_read_lock_held_common+0x1a/0x50
[   74.829022]  ? rcu_read_lock_held+0x5f/0xb0
[   74.829023]  _raw_spin_lock_irqsave+0x43/0x90
[   74.829024]  ? htab_map_update_elem+0x271/0x5a0
[   74.829025]  htab_map_update_elem+0x271/0x5a0
[   74.829026]  bpf_prog_1fd9e30e1438d3c5_oncpu+0x9c/0xe88
[   74.829027]  bpf_overflow_handler+0x127/0x320
[   74.829028]  ? perf_event_text_poke_output+0x4d0/0x4d0
[   74.829029]  ? sched_clock_cpu+0x18/0x130
[   74.829030]  __perf_event_overflow+0xae/0x190
[   74.829030]  handle_pmi_common+0x34c/0x470
[   74.829031]  ? intel_pmu_save_and_restart+0x90/0x90
[   74.829032]  ? lock_acquire+0x3f8/0x510
[   74.829033]  ? lock_release+0x6b0/0x6b0
[   74.829034]  intel_pmu_handle_irq+0x11e/0x240
[   74.829034]  perf_event_nmi_handler+0x40/0x60
[   74.829035]  nmi_handle+0x110/0x360
[   74.829036]  ? __intel_pmu_enable_all.constprop.0+0x72/0xf0
[   74.829037]  default_do_nmi+0x6b/0x170
[   74.829038]  exc_nmi+0x106/0x130
[   74.829038]  end_repeat_nmi+0x16/0x55
[   74.829039] RIP: 0010:__intel_pmu_enable_all.constprop.0+0x72/0xf0
[   74.829042] Code: 2f 1f 03 48 8d bb b8 0c 00 00 e8 29 09 41 00 48 ...
[   74.829043] RSP: 0000:ffff8880a604fc90 EFLAGS: 00000002
[   74.829044] RAX: 000000070000000f RBX: ffff8883ec2195a0 RCX: 000000000000038f
[   74.829045] RDX: 0000000000000007 RSI: ffffffff82e72c20 RDI: ffff8883ec21a258
[   74.829046] RBP: 000000070000000f R08: ffffffff8101b013 R09: fffffbfff0a7982d
[   74.829047] R10: ffffffff853cc167 R11: fffffbfff0a7982c R12: 0000000000000000
[   74.829049] R13: ffff8883ec3f0af0 R14: ffff8883ec3fd120 R15: ffff8883e9c92098
[   74.829049]  ? intel_pmu_lbr_enable_all+0x43/0x240
[   74.829050]  ? __intel_pmu_enable_all.constprop.0+0x72/0xf0
[   74.829051]  ? __intel_pmu_enable_all.constprop.0+0x72/0xf0
[   74.829052]  </NMI>
[   74.829053]  perf_event_task_tick+0x48d/0x650
[   74.829054]  scheduler_tick+0x129/0x210
[   74.829054]  update_process_times+0x37/0x70
[   74.829055]  tick_sched_handle.isra.0+0x35/0x90
[   74.829056]  tick_sched_timer+0x8f/0xb0
[   74.829057]  __hrtimer_run_queues+0x364/0x7d0
[   74.829058]  ? tick_sched_do_timer+0xa0/0xa0
[   74.829058]  ? enqueue_hrtimer+0x1e0/0x1e0
[   74.829059]  ? recalibrate_cpu_khz+0x10/0x10
[   74.829060]  ? ktime_get_update_offsets_now+0x1a3/0x360
[   74.829061]  hrtimer_interrupt+0x1bb/0x360
[   74.829062]  ? rcu_read_lock_sched_held+0xa1/0xd0
[   74.829063]  __sysvec_apic_timer_interrupt+0xed/0x3d0
[   74.829064]  sysvec_apic_timer_interrupt+0x3f/0xd0
[   74.829064]  ? asm_sysvec_apic_timer_interrupt+0xa/0x20
[   74.829065]  asm_sysvec_apic_timer_interrupt+0x12/0x20
[   74.829066] RIP: 0033:0x7fba18d579b4
[   74.829068] Code: 74 54 44 0f b6 4a 04 41 83 e1 0f 41 80 f9 ...
[   74.829069] RSP: 002b:00007ffc9ba69570 EFLAGS: 00000206
[   74.829071] RAX: 00007fba192084c0 RBX: 00007fba18c24d28 RCX: 00000000000007a4
[   74.829072] RDX: 00007fba18c30488 RSI: 0000000000000000 RDI: 000000000000037b
[   74.829073] RBP: 00007fba18ca5760 R08: 00007fba18c248fc R09: 00007fba18c94c30
[   74.829074] R10: 000000000000002f R11: 0000000000073c30 R12: 00007ffc9ba695e0
[   74.829075] R13: 00000000000003f3 R14: 00007fba18c21ac8 R15: 00000000000058d6

However, such warning should not apply across multiple hashtabs. The
system will not deadlock if one hashtab is used in NMI, while another
hashtab is used in non-NMI.

Use separate lockdep class for each hashtab, so that we don't get this
false alert.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201029071925.3103400-2-songliubraving@fb.com

Commit e679654a ("bpf: Fix a rcu_sched stall issue with
bpf task/task_file iterator") tries to fix rcu stalls warning
which is caused by bpf task_file iterator when running
"bpftool prog".

      rcu: INFO: rcu_sched self-detected stall on CPU
      rcu: \x097-....: (20999 ticks this GP) idle=302/1/0x4000000000000000 softirq=1508852/1508852 fqs=4913
      \x09(t=21031 jiffies g=2534773 q=179750)
      NMI backtrace for cpu 7
      CPU: 7 PID: 184195 Comm: bpftool Kdump: loaded Tainted: G        W         5.8.0-00004-g68bfc7f8c1b4 #6
      Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A17 05/03/2019
      Call Trace:
      <IRQ>
      dump_stack+0x57/0x70
      nmi_cpu_backtrace.cold+0x14/0x53
      ? lapic_can_unplug_cpu.cold+0x39/0x39
      nmi_trigger_cpumask_backtrace+0xb7/0xc7
      rcu_dump_cpu_stacks+0xa2/0xd0
      rcu_sched_clock_irq.cold+0x1ff/0x3d9
      ? tick_nohz_handler+0x100/0x100
      update_process_times+0x5b/0x90
      tick_sched_timer+0x5e/0xf0
      __hrtimer_run_queues+0x12a/0x2a0
      hrtimer_interrupt+0x10e/0x280
      __sysvec_apic_timer_interrupt+0x51/0xe0
      asm_call_on_stack+0xf/0x20
      </IRQ>
      sysvec_apic_timer_interrupt+0x6f/0x80
      ...
      task_file_seq_next+0x52/0xa0
      bpf_seq_read+0xb9/0x320
      vfs_read+0x9d/0x180
      ksys_read+0x5f/0xe0
      do_syscall_64+0x38/0x60
      entry_SYSCALL_64_after_hwframe+0x44/0xa9

The fix is to limit the number of bpf program runs to be
one million. This fixed the program in most cases. But
we also found under heavy load, which can increase the wallclock
time for bpf_seq_read(), the warning may still be possible.

For example, calling bpf_delay() in the "while" loop of
bpf_seq_read(), which will introduce artificial delay,
the warning will show up in my qemu run.

  static unsigned q;
  volatile unsigned *p = &q;
  volatile unsigned long long ll;
  static void bpf_delay(void)
  {
         int i, j;

         for (i = 0; i < 10000; i++)
                 for (j = 0; j < 10000; j++)
                         ll += *p;
  }

There are two ways to fix this issue. One is to reduce the above
one million threshold to say 100,000 and hopefully rcu warning will
not show up any more. Another is to introduce a target feature
which enables bpf_seq_read() calling cond_resched().

This patch took second approach as the first approach may cause
more -EAGAIN failures for read() syscalls. Note that not all bpf_iter
targets can permit cond_resched() in bpf_seq_read() as some, e.g.,
netlink seq iterator, rcu read lock critical section spans through
seq_ops->next() -> seq_ops->show() -> seq_ops->next().

For the kernel code with the above hack, "bpftool p" roughly takes
38 seconds to finish on my VM with 184 bpf program runs.
Using the following command, I am able to collect the number of
context switches:
   perf stat -e context-switches -- ./bpftool p >& log
Without this patch,
   69      context-switches
With this patch,
   75      context-switches
This patch added additional 6 context switches, roughly every 6 seconds
to reschedule, to avoid lengthy no-rescheduling which may cause the
above RCU warnings.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201028061054.1411116-1-yhs@fb.com

Pull networking fixes from Jakub Kicinski:
 "Cross-tree/merge window issues:

   - rtl8150: don't incorrectly assign random MAC addresses; fix late in
     the 5.9 cycle started depending on a return code from a function
     which changed with the 5.10 PR from the usb subsystem

  Current release regressions:

   - Revert "virtio-net: ethtool configurable RXCSUM", it was causing
     crashes at probe when control vq was not negotiated/available

  Previous release regressions:

   - ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
     bus, only first device would be probed correctly

   - nexthop: Fix performance regression in nexthop deletion by
     effectively switching from recently added synchronize_rcu() to
     synchronize_rcu_expedited()

   - netsec: ignore 'phy-mode' device property on ACPI systems; the
     property is not populated correctly by the firmware, but firmware
     configures the PHY so just keep boot settings

  Previous releases - always broken:

   - tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
     bulk transfers getting "stuck"

   - icmp: randomize the global rate limiter to prevent attackers from
     getting useful signal

   - r8169: fix operation under forced interrupt threading, make the
     driver always use hard irqs, even on RT, given the handler is light
     and only wants to schedule napi (and do so through a _irqoff()
     variant, preferably)

   - bpf: Enforce pointer id generation for all may-be-null register
     type to avoid pointers erroneously getting marked as null-checked

   - tipc: re-configure queue limit for broadcast link

   - net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
     tunnels

   - fix various issues in chelsio inline tls driver

  Misc:

   - bpf: improve just-added bpf_redirect_neigh() helper api to support
     supplying nexthop by the caller - in case BPF program has already
     done a lookup we can avoid doing another one

   - remove unnecessary break statements

   - make MCTCP not select IPV6, but rather depend on it"

* tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
  tcp: fix to update snd_wl1 in bulk receiver fast path
  net: Properly typecast int values to set sk_max_pacing_rate
  netfilter: nf_fwd_netdev: clear timestamp in forwarding path
  ibmvnic: save changed mac address to adapter->mac_addr
  selftests: mptcp: depends on built-in IPv6
  Revert "virtio-net: ethtool configurable RXCSUM"
  rtnetlink: fix data overflow in rtnl_calcit()
  net: ethernet: mtk-star-emac: select REGMAP_MMIO
  net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup
  net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device
  bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static
  bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh()
  bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop
  mptcp: depends on IPV6 but not as a module
  sfc: move initialisation of efx->filter_sem to efx_init_struct()
  mpls: load mpls_gso after mpls_iptunnel
  net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels
  net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action()
  net: dsa: bcm_sf2: make const array static, makes object smaller
  mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it
  ...

Pull gfs2 updates from Andreas Gruenbacher:

 - Use iomap for non-journaled buffered I/O. This largely eliminates
   buffer heads on filesystems where the block size matches the page
   size. Many thanks to Christoph Hellwig for this patch!

 - Fixes for some more journaled data filesystem bugs, found by running
   xfstests with data journaling on for all files (chattr +j $MNT) (Bob
   Peterson)

 - gfs2_evict_inode refactoring (Bob Peterson)

 - Use the statfs data in the journal during recovery instead of reading
   it in from the local statfs inodes (Abhi Das)

 - Several other minor fixes by various people

* tag 'gfs2-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (30 commits)
  gfs2: Recover statfs info in journal head
  gfs2: lookup local statfs inodes prior to journal recovery
  gfs2: Add fields for statfs info in struct gfs2_log_header_host
  gfs2: Ignore subsequent errors after withdraw in rgrp_go_sync
  gfs2: Eliminate gl_vm
  gfs2: Only access gl_delete for iopen glocks
  gfs2: Fix comments to glock_hash_walk
  gfs2: eliminate GLF_QUEUED flag in favor of list_empty(gl_holders)
  gfs2: Ignore journal log writes for jdata holes
  gfs2: simplify gfs2_block_map
  gfs2: Only set PageChecked if we have a transaction
  gfs2: don't lock sd_ail_lock in gfs2_releasepage
  gfs2: make gfs2_ail1_empty_one return the count of active items
  gfs2: Wipe jdata and ail1 in gfs2_journal_wipe, formerly gfs2_meta_wipe
  gfs2: enhance log_blocks trace point to show log blocks free
  gfs2: add missing log_blocks trace points in gfs2_write_revokes
  gfs2: rename gfs2_write_full_page to gfs2_write_jdata_page, remove parm
  gfs2: add validation checks for size of superblock
  gfs2: use-after-free in sysfs deregistration
  gfs2: Fix NULL pointer dereference in gfs2_rgrp_dump
  ...

Pull cifs updates from Steve French:

 - add support for recognizing special file types (char/block/fifo/
   symlink) for files created by Linux on WSL (a format we plan to move
   to as the default for creating special files on Linux, as it has
   advantages over the other current option, the SFU format) in readdir.

 - fix double queries to root directory when directory leases not
   supported (e.g. Samba)

 - fix querying mode bits (modefromsid mount option) for special file
   types

 - stronger encryption (gcm256), disabled by default until tested more
   broadly

 - allow querying owner when server reports 'well known SID' on query
   dir with SMB3.1.1 POSIX extensions

* tag '5.10-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (30 commits)
  SMB3: add support for recognizing WSL reparse tags
  cifs: remove bogus debug code
  smb3.1.1: fix typo in compression flag
  cifs: move smb version mount options into fs_context.c
  cifs: move cache mount options to fs_context.ch
  cifs: move security mount options into fs_context.ch
  cifs: add files to host new mount api
  smb3: do not try to cache root directory if dir leases not supported
  smb3: fix stat when special device file and mounted with modefromsid
  cifs: Print the address and port we are connecting to in generic_ip_connect()
  SMB3: Resolve data corruption of TCP server info fields
  cifs: make const array static, makes object smaller
  SMB3.1.1: Fix ids returned in POSIX query dir
  smb3: add dynamic trace point to trace when credits obtained
  smb3.1.1: do not fail if no encryption required but server doesn't support it
  cifs: Return the error from crypt_message when enc/dec key not found.
  smb3.1.1: set gcm256 when requested
  smb3.1.1: rename nonces used for GCM and CCM encryption
  smb3.1.1: print warning if server does not support requested encryption type
  smb3.1.1: add new module load parm enable_gcm_256
  ...

Pull clone/dedupe/remap code refactoring from Darrick Wong:
 "Move the generic file range remap (aka reflink and dedupe) functions
  out of mm/filemap.c and fs/read_write.c and into fs/remap_range.c to
  reduce clutter in the first two files"

* tag 'vfs-5.10-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  vfs: move the generic write and copy checks out of mm
  vfs: move the remap range helpers to remap_range.c
  vfs: move generic_remap_checks out of mm

Pull KVM updates from Paolo Bonzini:
 "For x86, there is a new alternative and (in the future) more scalable
  implementation of extended page tables that does not need a reverse
  map from guest physical addresses to host physical addresses.

  For now it is disabled by default because it is still lacking a few of
  the existing MMU's bells and whistles. However it is a very solid
  piece of work and it is already available for people to hammer on it.

  Other updates:

  ARM:
   - New page table code for both hypervisor and guest stage-2
   - Introduction of a new EL2-private host context
   - Allow EL2 to have its own private per-CPU variables
   - Support of PMU event filtering
   - Complete rework of the Spectre mitigation

  PPC:
   - Fix for running nested guests with in-kernel IRQ chip
   - Fix race condition causing occasional host hard lockup
   - Minor cleanups and bugfixes

  x86:
   - allow trapping unknown MSRs to userspace
   - allow userspace to force #GP on specific MSRs
   - INVPCID support on AMD
   - nested AMD cleanup, on demand allocation of nested SVM state
   - hide PV MSRs and hypercalls for features not enabled in CPUID
   - new test for MSR_IA32_TSC writes from host and guest
   - cleanups: MMU, CPUID, shared MSRs
   - LAPIC latency optimizations ad bugfixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits)
  kvm: x86/mmu: NX largepage recovery for TDP MMU
  kvm: x86/mmu: Don't clear write flooding count for direct roots
  kvm: x86/mmu: Support MMIO in the TDP MMU
  kvm: x86/mmu: Support write protection for nesting in tdp MMU
  kvm: x86/mmu: Support disabling dirty logging for the tdp MMU
  kvm: x86/mmu: Support dirty logging for the TDP MMU
  kvm: x86/mmu: Support changed pte notifier in tdp MMU
  kvm: x86/mmu: Add access tracking for tdp_mmu
  kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU
  kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU
  kvm: x86/mmu: Add TDP MMU PF handler
  kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg
  kvm: x86/mmu: Support zapping SPTEs in the TDP MMU
  KVM: Cache as_id in kvm_memory_slot
  kvm: x86/mmu: Add functions to handle changed TDP SPTEs
  kvm: x86/mmu: Allocate and free TDP MMU roots
  kvm: x86/mmu: Init / Uninit the TDP MMU
  kvm: x86/mmu: Introduce tdp_iter
  KVM: mmu: extract spte.h and spte.c
  KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp
  ...

Pull virtio updates from Michael Tsirkin:
 "vhost, vdpa, and virtio cleanups and fixes

  A very quiet cycle, no new features"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  MAINTAINERS: add URL for virtio-mem
  vhost_vdpa: remove unnecessary spin_lock in vhost_vring_call
  vringh: fix __vringh_iov() when riov and wiov are different
  vdpa/mlx5: Setup driver only if VIRTIO_CONFIG_S_DRIVER_OK
  s390: virtio: PV needs VIRTIO I/O device protection
  virtio: let arch advertise guest's memory access restrictions
  vhost_vdpa: Fix duplicate included kernel.h
  vhost: reduce stack usage in log_used
  virtio-mem: Constify mem_id_table
  virtio_input: Constify id_table
  virtio-balloon: Constify id_table
  vdpa/mlx5: Fix failure to bring link up
  vdpa/mlx5: Make use of a specific 16 bit endianness API

Merge tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:
 "cros-ec:
   - Error code cleanup across cros-ec by Guenter
   - Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status

  cros_ec_typec:
   - Landed initial USB4 support in typec connector class driver for
     cros_ec
   - Role switch bugfix on disconnect, and reordering configuration
     steps

  cros_ec_lightbar:
   - Fix buffer outsize and result for get_lightbar_version

  misc:
   - Remove config MFD_CROS_EC, now that transition from MFD is complete
   - Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard
     keymap"

* tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA
  platform/chrome: Use kobj_to_dev() instead of container_of()
  platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer()
  platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites
  platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config
  platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command
  platform/chrome: cros_ec_trace: Add fields to command traces
  platform/chrome: cros_ec_typec: Re-order connector configuration steps
  platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect
  platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role()
  platform/chrome: cros_ec_typec: USB4 support
  pwm: cros-ec: Simplify EC error handling
  platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes
  platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT
  pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status
  platform/chrome: cros_ec_sysfs: Report range of error codes from EC
  cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status
  iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code

Pull arch task_work cleanups from Jens Axboe:
 "Two cleanups that don't fit other categories:

   - Finally get the task_work_add() cleanup done properly, so we don't
     have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates
     all callers, and also fixes up the documentation for
     task_work_add().

   - While working on some TIF related changes for 5.11, this
     TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch
     duplication for how that is handled"

* tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block:
  task_work: cleanup notification modes
  tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()

Pull ARC fix from Vineet Gupta:
 "I found a snafu in perf driver which made it into 5.9-rc4 and the fix
  should go in now than wait"

* tag 'arc-5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: perf: redo the pct irq missing in device-tree handling

Pull more arm64 updates from Will Deacon:
 "A small selection of further arm64 fixes and updates. Most of these
  are fixes that came in during the merge window, with the exception of
  the HAVE_MOVE_PMD mremap() speed-up which we discussed back in 2018
  and somehow forgot to enable upstream.

   - Improve performance of Spectre-v2 mitigation on Falkor CPUs (if
     you're lucky enough to have one)

   - Select HAVE_MOVE_PMD. This has been shown to improve mremap()
     performance, which is used heavily by the Android runtime GC, and
     it seems we forgot to enable this upstream back in 2018.

   - Ensure linker flags are consistent between LLVM and BFD

   - Fix stale comment in Spectre mitigation rework

   - Fix broken copyright header

   - Fix KASLR randomisation of the linear map

   - Prevent arm64-specific prctl()s from compat tasks (return -EINVAL)"

Link: https://lore.kernel.org/kvmarm/20181108181201.88826-3-joelaf@google.com/

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: proton-pack: Update comment to reflect new function name
  arm64: spectre-v2: Favour CPU-specific mitigation at EL2
  arm64: link with -z norelro regardless of CONFIG_RELOCATABLE
  arm64: Fix a broken copyright header in gen_vdso_offsets.sh
  arm64: mremap speedup - Enable HAVE_MOVE_PMD
  arm64: mm: use single quantity to represent the PA to VA translation
  arm64: reject prctl(PR_PAC_RESET_KEYS) on compat tasks

Apply the outstanding statfs changes in the journal head to the
master statfs file. Zero out the local statfs file for good measure.

Previously, statfs updates would be read in from the local statfs inode and
synced to the master statfs inode during recovery.

We now use the statfs updates in the journal head to update the master statfs
inode instead of reading in from the local statfs inode. To preserve backward
compatibility with kernels that can't do this, we still need to keep the
local statfs inode up to date by writing changes to it. At some point in the
future, we can do away with the local statfs inodes altogether and keep the
statfs changes solely in the journal.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

We need to lookup the master statfs inode and the local statfs
inodes earlier in the mount process (in init_journal) so journal
recovery can use them when it attempts to recover the statfs info.
We lookup all the local statfs inodes and store them in a linked
list to allow a node to recover statfs info for other nodes in the
cluster.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

When KVM maps a largepage backed region at a lower level in order to
make it executable (i.e. NX large page shattering), it reduces the TLB
performance of that region. In order to avoid making this degradation
permanent, KVM must periodically reclaim shattered NX largepages by
zapping them and allowing them to be rebuilt in the page fault handler.

With this patch, the TDP MMU does not respect KVM's rate limiting on
reclaim. It traverses the entire TDP structure every time. This will be
addressed in a future patch.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-21-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Direct roots don't have a write flooding count because the guest can't
affect that paging structure. Thus there's no need to clear the write
flooding count on a fast CR3 switch for direct roots.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-20-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In order to support MMIO, KVM must be able to walk the TDP paging
structures to find mappings for a given GFN. Support this walk for
the TDP MMU.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538

v2: Thanks to Dan Carpenter and kernel test robot for finding that root
was used uninitialized in get_mmio_spte.
Signed-off-by: Ben Gardon <bgardon@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <20201014182700.2888246-19-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

To support nested virtualization, KVM will sometimes need to write
protect pages which are part of a shadowed paging structure or are not
writable in the shadowed paging structure. Add a function to write
protect GFN mappings for this purpose.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-18-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Dirty logging ultimately breaks down MMU mappings to 4k granularity.
When dirty logging is no longer needed, these granaular mappings
represent a useless performance penalty. When dirty logging is disabled,
search the paging structure for mappings that could be re-constituted
into a large page mapping. Zap those mappings so that they can be
faulted in again at a higher mapping level.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-17-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Dirty logging is a key feature of the KVM MMU and must be supported by
the TDP MMU. Add support for both the write protection and PML dirty
logging modes.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-16-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In order to interoperate correctly with the rest of KVM and other Linux
subsystems, the TDP MMU must correctly handle various MMU notifiers. Add
a hook and handle the change_pte MMU notifier.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-15-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In order to interoperate correctly with the rest of KVM and other Linux
subsystems, the TDP MMU must correctly handle various MMU notifiers. The
main Linux MM uses the access tracking MMU notifiers for swap and other
features. Add hooks to handle the test/flush HVA (range) family of
MMU notifiers.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-14-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In order to interoperate correctly with the rest of KVM and other Linux
subsystems, the TDP MMU must correctly handle various MMU notifiers. Add
hooks to handle the invalidate range family of MMU notifiers.

Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.

This series can be viewed in Gerrit at:
	https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-13-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>