- 02 May, 2020 9 commits
-
-
Gal Pressman authored
Add a new stat that counts admin commands failures, which might help when debugging different issues. Link: https://lore.kernel.org/r/20200420062213.44577-4-galpress@amazon.comReviewed-by:
Daniel Kranzdorf <dkkranzd@amazon.com> Reviewed-by:
Yossi Leybovich <sleybo@amazon.com> Signed-off-by:
Gal Pressman <galpress@amazon.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Gal Pressman authored
Add a new stat that counts mmap failures, which might help when debugging different issues. Link: https://lore.kernel.org/r/20200420062213.44577-3-galpress@amazon.comReviewed-by:
Firas JahJah <firasj@amazon.com> Reviewed-by:
-
Gal Pressman authored
Create CQ errors are already being counted, report them along all other counters. Link: https://lore.kernel.org/r/20200420062213.44577-2-galpress@amazon.comReviewed-by:
-
Maor Gottlieb authored
The patch sets the lag tx affinity of the data QPs and the GSI QPs according to the LAG xmit slave. For GSI QPs, in case the link layer is Ethenet (RoCE) we create two GSI QPs, one for each physical port. When the driver selects the GSI QP, it will consider the port affinity result. For connected QPs, the driver sets the affinity of the xmit slave. The above, ensures that RC QP and it's corresponding GSI QP will transmit from the same physical port. Link: https://lore.kernel.org/r/20200430192146.12863-17-maorg@mellanox.comSigned-off-by:
Maor Gottlieb <maorg@mellanox.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Maor Gottlieb authored
Move affinity related code in modify qp to function. It's a preparation for next patch the extend the affinity calculation to consider the xmit slave. Link: https://lore.kernel.org/r/20200430192146.12863-16-maorg@mellanox.comSigned-off-by:
-
Maor Gottlieb authored
Add a call to rdma_lag_get_ah_roce_slave() when the address handle is created. Lower driver can use it to select the QP's affinity port. Link: https://lore.kernel.org/r/20200430192146.12863-15-maorg@mellanox.comSigned-off-by:
-
Maor Gottlieb authored
Add support to get the RoCE LAG xmit slave by building skb of the RoCE packet and call to master_get_xmit_slave. If driver wants to get the slave assume all slaves are available, then need to set RDMA_LAG_FLAGS_HASH_ALL_SLAVES in flags. Link: https://lore.kernel.org/r/20200430192146.12863-14-maorg@mellanox.comSigned-off-by:
-
Maor Gottlieb authored
Following patch adds additional argument to the create AH function, so it make sense to group ah_attr and flags arguments in struct. Link: https://lore.kernel.org/r/20200430192146.12863-13-maorg@mellanox.comSigned-off-by:
Devesh Sharma <devesh.sharma@broadcom.com> Acked-by:
Weihang Li <liweihang@huawei.com> Reviewed-by:
-
Jason Gunthorpe authored
From the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Required for dependencies in following patches * mellanox/mlx5-next: net/mlx5: Add support to get lag physical port net/mlx5: Change lag mutex lock to spin lock bonding: Implement ndo_get_xmit_slave bonding: Add array of all slaves bonding: Add function to get the xmit slave in active-backup mode bonding: Add helper function to get the xmit slave in rr mode bonding: Add helper function to get the xmit slave based on hash bonding/alb: Add helper functions to get the xmit slave bonding: Rename slave_arr to usable_slaves bonding: Export skip slave logic to function net/core: Introduce netdev_get_xmit_slave
-
- 01 May, 2020 11 commits
-
-
Maor Gottlieb authored
Add function to get the device physical port of the lag slave. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Maor Gottlieb authored
The lag lock could be a spin lock, the critical section is short and there is no need that the thread will sleep. Change the lock that protects the LAG structure from mutex to spin lock. It is required for next patch that need to access this structure from context that we can't sleep. In addition there is no need to hold this lock when query the congestion counters. Signed-off-by:
-
Maor Gottlieb authored
Add implementation of ndo_get_xmit_slave. Find the slave by using the helper function according to the bond mode. If the caller set all_slaves to true, then it assumes that all slaves are available to transmit. Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Acked-by:
-
Maor Gottlieb authored
Keep all slaves in array so it could be used to get the xmit slave assume all the slaves are active. The logic to add slave to the array is like the usable slaves, except that we also add slaves that currently can't transmit - not up or active. Signed-off-by:
-
Maor Gottlieb authored
Add helper function to get the xmit slave in active-backup mode. It's only one line function that return the curr_active_slave, but it will used both in the xmit flow and by the new .ndo to get the xmit slave. Signed-off-by:
-
Maor Gottlieb authored
Add helper function to get the xmit slave when bond is in round robin mode. Change bond_xmit_slave_id to bond_get_slave_by_id, then the logic for find the next slave for transmit could be used both by the xmit flow and the .ndo to get the xmit slave. Signed-off-by:
-
Maor Gottlieb authored
Both xor and 802.3ad modes use bond_xmit_hash to get the xmit slave. Export the logic to helper function so it could be used in the following patches by the .ndo to get the xmit slave. Signed-off-by:
-
Maor Gottlieb authored
Add two helper functions to get the xmit slave of bond in alb or tlb mode. Extract the logic of find the xmit slave from the xmit flow to function. Xmit flow will xmit through this slave and in the following patches the new .ndo will call to the helper function to return the xmit slave. Signed-off-by:
-
Maor Gottlieb authored
Rename slave_arr to usable_slaves, since we will have two arrays, one for the usable slaves and the other to all slaves. Signed-off-by:
-
Maor Gottlieb authored
As a preparation for following change that add array of all slaves, extract code that skip slave to function. Signed-off-by:
-
Maor Gottlieb authored
Add new ndo to get the xmit slave of master device. The reference counters are not incremented so the caller must be careful with locks. User can ask to get the xmit slave assume all the slaves can transmit by set all_slaves arg to true. Signed-off-by:
David Ahern <dsahern@gmail.com> Acked-by:
-
- 30 Apr, 2020 18 commits
-
-
Aharon Landau authored
RAW packet QP and underlay QP must be created with either RQ or SQ, check that. Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Link: https://lore.kernel.org/r/20200427154636.381474-37-leon@kernel.orgSigned-off-by:
Aharon Landau <aharonl@mellanox.com> Reviewed-by:
-
Leon Romanovsky authored
Finish separation to blocks of mlx5_ib_create_qp() functions, so all internal create QP implementation are located in one place. Link: https://lore.kernel.org/r/20200427154636.381474-36-leon@kernel.orgReviewed-by:
-
Leon Romanovsky authored
After major refactoring in create QP flow, it is no needed to call to destroy QP in XRC_TGT flow. Link: https://lore.kernel.org/r/20200427154636.381474-35-leon@kernel.orgReviewed-by:
-
Leon Romanovsky authored
Update all the places in create QP flows to copy response to the user in one place. Link: https://lore.kernel.org/r/20200427154636.381474-34-leon@kernel.orgReviewed-by:
-
Leon Romanovsky authored
Place in one function all udata size checks. This will allow us move ib_copy_to_udata() in general place and ensure that it will be performed after call to the FW. Link: https://lore.kernel.org/r/20200427154636.381474-33-leon@kernel.orgReviewed-by:
-
Leon Romanovsky authored
Move check that user didn't supplied RSS RAW QP unsupported command flags to the function that checks all such flags. Link: https://lore.kernel.org/r/20200427154636.381474-32-leon@kernel.orgReviewed-by:
-
Leon Romanovsky authored
The amount of parameters passed in and out between internal mlx5 create QP functions is too large to easily follow the flow. Change it by grouping all create QP parameter into one structure. Link: https://lore.kernel.org/r/20200427154636.381474-31-leon@kernel.orgReviewed-by:
-
Leon Romanovsky authored
Delete both PD argument and checks if udata was provided, in favour of unified destroy QP functions. Link: https://lore.kernel.org/r/20200427154636.381474-30-leon@kernel.orgReviewed-by:
-
Leon Romanovsky authored
The kernel and user create QP flows have very little common code, separate them to simplify the future work of creating per-type create_*_qp() functions. Link: https://lore.kernel.org/r/20200427154636.381474-29-leon@kernel.orgReviewed-by:
-
Leon Romanovsky authored
XRC_TGT QP doesn't fail into kernel or user flow separation. It is initiated by the user, but is created through in-kernel verbs flow and doesn't have PD and udata in similar way to kernel QPs. So let's separate creation of that QP type from the common flow. Link: https://lore.kernel.org/r/20200427154636.381474-28-leon@kernel.orgReviewed-by:
-
Leon Romanovsky authored
Remove duplication in parsing of DEVX UID. Link: https://lore.kernel.org/r/20200427154636.381474-27-leon@kernel.orgReviewed-by:
-
Leon Romanovsky authored
The inlen is set to be above zero in all flows before and can't be negative at this stage. Link: https://lore.kernel.org/r/20200427154636.381474-26-leon@kernel.orgReviewed-by:
-
Leon Romanovsky authored
Instead of keeping special field to separate kernel/user create/destroy flows, rely on existence of udata pointer. All allocation flows are using kzalloc() and leave uninitialized pointers as NULL which makes MLX5_QP_EMPTY and MLX5_QP_KERNEL flows to be the same. Link: https://lore.kernel.org/r/20200427154636.381474-25-leon@kernel.orgReviewed-by:
-
Leon Romanovsky authored
Combine copy_from_user() from create_user_qp() and general code. Link: https://lore.kernel.org/r/20200427154636.381474-24-leon@kernel.orgReviewed-by:
-
Leon Romanovsky authored
Change the create QP flow to handle all copy_from_user() operations in one place. Link: https://lore.kernel.org/r/20200427154636.381474-23-leon@kernel.orgReviewed-by:
-
Leon Romanovsky authored
Perform check of attributes of RAW PACKET QP in separate function. Link: https://lore.kernel.org/r/20200427154636.381474-22-leon@kernel.orgReviewed-by:
-
Leon Romanovsky authored
QP type is stored in the IB/core QP struct, but it doesn't have all the needed information, like internal QP type used in the driver itself. Update mlx5_ib to have cached QP type which includes both IBTA and Mellanox specific one. Such change allows us to make even further cleanup of QP creation flow. Link: https://lore.kernel.org/r/20200427154636.381474-21-leon@kernel.orgReviewed-by:
-
Leon Romanovsky authored
There is no need to explicitly check unsupported QP types, rely on "default" keyword in switch-case to catch them. Link: https://lore.kernel.org/r/20200427154636.381474-20-leon@kernel.orgReviewed-by:
-
- 29 Apr, 2020 1 commit
-
-
Jason Gunthorpe authored
Leon Romanovsky says: ==================== This is first part of series which tries to return some sanity to mlx5_ib_create_qp() function. Such refactoring is required to make extension of that function with less worries of breaking driver. Extra goal of such refactoring is to ensure that QP is allocated at the beginning of function and released at the end. It will allow us to move QP allocation to be under IB/core responsibility. ==================== Based on the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Due to dependencies * branch 'mlx5_ib_qp_refactor_1': (66 commits) RDMA/mlx5: Process all vendor flags in one place RDMA/mlx5: Return all configured create flags through query QP RDMA/mlx5: Change scatter CQE flag to be set like other vendor flags RDMA/mlx5: Use flags_en mechanism to mark QP created with WQE signature RDMA/mlx5: Process create QP flags in one place RDMA/mlx5: Delete create QP flags obfuscation RDMA/mlx5: Initial separation of RAW_PACKET QP from common flow RDMA/mlx5: Remove second copy from user for non RSS RAW QPs RDMA/mlx5: Move DRIVER QP flags check into separate function RDMA/mlx5: Update all DRIVER QP places to use QP subtype RDMA/mlx5: Split scatter CQE configuration for DCT QP RDMA/mlx5: Separate create QP flows to be based on type RDMA/mlx5: Set QP subtype immediately when it is known RDMA/mlx5: Avoid setting redundant NULL for XRC QPs RDMA/mlx5: Prepare QP allocation for future removal RDMA/mlx5: Perform check if QP creation flow is valid RDMA/mlx5: Delete impossible GSI port check RDMA/mlx5: Organize QP types checks in one place Signed-off-by:
-
- 28 Apr, 2020 1 commit
-
-
Leon Romanovsky authored
Check that vendor flags provided through ucmd are valid. Link: https://lore.kernel.org/r/20200427154636.381474-19-leon@kernel.orgReviewed-by:
-
