- 23 Feb, 2017 40 commits
-
-
Chris Mason authored
commit 570dd450 upstream. btrfs_remove_all_log_ctxs takes a shortcut where it avoids walking the list because it knows all of the waiters are patiently waiting for the commit to finish. But, there's a small race where btrfs_sync_log can remove itself from the list if it finds a log commit is already done. Also, it uses list_del_init() to remove itself from the list, but there's no way to know if btrfs_remove_all_log_ctxs has already run, so we don't know for sure if it is safe to call list_del_init(). This gets rid of all the shortcuts for btrfs_remove_all_log_ctxs(), and just calls it with the proper locking. This is part two of the corruption fixed by cbd60aa7. I should have done this in the first place, but convinced myself the optimizations were safe. A 12 hour run of dbench 2048 will eventually trigger a list debug WARN_ON for the list_del_init() in btrfs_sync_log(). Fixes: d1433debReported-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
John W. Linville authored
commit f1d505bb upstream. Commit 36b701fa ("netfilter: nf_tables: validate maximum value of u32 netlink attributes") introduced nft_parse_u32_check with a return value of "unsigned int", yet on error it returns "-ERANGE". This patch corrects the mismatch by changing the return value to "int", which happens to match the actual users of nft_parse_u32_check already. Found by Coverity, CID 1373930. Note that commit 21a9e0f1 ("netfilter: nft_exthdr: fix error handling in nft_exthdr_init()) attempted to address the issue, but did not address the return type of nft_parse_u32_check. Signed-off-by:
John W. Linville <linville@tuxdriver.com> Cc: Laura Garcia Liebana <nevola@gmail.com> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 36b701fa ("netfilter: nf_tables: validate maximum value...") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Ulrich Weber authored
commit 444f9017 upstream. on SIP requests, so a fragmented TCP SIP packet from an allow header starting with INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE Content-Length: 0 will not bet interpreted as an INVITE request. Also Request-URI must start with an alphabetic character. Confirm with RFC 3261 Request-Line = Method SP Request-URI SP SIP-Version CRLF Fixes: 30f33e6d ("[NETFILTER]: nf_conntrack_sip: support method specific request/response handling") Signed-off-by:
Ulrich Weber <ulrich.weber@riverbed.com> Acked-by:
Marco Angaroni <marcoangaroni@gmail.com> Signed-off-by:
-
Scot Doyle authored
commit 009e39ae upstream. When resizing a vt its selection may exceed the new size, resulting in an invalid memory access [1]. Clear the selection before resizing. [1] http://lkml.kernel.org/r/CACT4Y+acDTwy4umEvf5ROBGiRJNrxHN4Cn5szCXE5Jw-d1B=Xw@mail.gmail.comReported-and-tested-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Scot Doyle <lkml14@scotdoyle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Dmitry Vyukov authored
commit 32b2921e upstream. Size of kmalloc() in vc_do_resize() is controlled by user. Too large kmalloc() size triggers WARNING message on console. Put a reasonable upper bound on terminal size to prevent WARNINGs. Signed-off-by:
-
Jiri Slaby authored
commit 42acfc66 upstream. In csi_J(3), the third parameter of scr_memsetw (vc_screenbuf_size) is divided by 2 inappropriatelly. But scr_memsetw expects size, not count, because it divides the size by 2 on its own before doing actual memset-by-words. So remove the bogus division. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Petr Písař <ppisar@redhat.com> Fixes: f8df13e0 (tty: Clean console safely) Signed-off-by:
-
Marcel Hasler authored
commit bdc3478f upstream. The stk1160 chip needs QUIRK_AUDIO_ALIGN_TRANSFER. This patch resolves the issue reported on the mailing list (http://marc.info/?l=linux-sound&m=139223599126215&w=2) and also fixes bug 180071 (https://bugzilla.kernel.org/show_bug.cgi?id=180071). Signed-off-by:
Marcel Hasler <mahasler@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Ching Huang authored
commit 2bf7dc84 upstream. The arcmsr driver failed to pass SYNCHRONIZE CACHE to controller firmware. Depending on how drive caches are handled internally by controller firmware this could potentially lead to data integrity problems. Ensure that cache flushes are passed to the controller. [mkp: applied by hand and removed unused vars] Signed-off-by:
Ching Huang <ching2048@areca.com.tw> Reported-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Ewan D. Milne authored
commit 4d2b496f upstream. map_storep was not being vfree()'d in the module_exit call. Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
Laurence Oberman <loberman@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit 7dc86ef5 upstream. Consolidate existing quirks. Fixes stability issues on some kickers. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
James Hogan authored
commit e1e575f6 upstream. The advancing of the PC when completing an MMIO load is done before re-entering the guest, i.e. before restoring the guest ASID. However if the load is in a branch delay slot it may need to access guest code to read the prior branch instruction. This isn't safe in TLB mapped code at the moment, nor in the future when we'll access unmapped guest segments using direct user accessors too, as it could read the branch from host user memory instead. Therefore calculate the resume PC in advance while we're still in the right context and save it in the new vcpu->arch.io_pc (replacing the no longer needed vcpu->arch.pending_load_cause), and restore it on MMIO completion. Fixes: e685c689 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> [bwh: Backported to 3.16: adjust filename, context] Signed-off-by:
-
Nicholas Mc Guire authored
commit 5f508c43 upstream. As kvm_mips_complete_mmio_load() did not yet modify PC at this point as James Hogans <james.hogan@imgtec.com> explained the curr_pc variable and the comments along with it can be dropped. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Link: http://lkml.org/lkml/2015/5/8/422 Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9993/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> [bwh: Backported to 3.16: adjust filename] Signed-off-by:
-
James Hogan authored
commit ede5f3e7 upstream. The ERET instruction to return from exception is used for returning from exception level (Status.EXL) and error level (Status.ERL). If both bits are set however we should be returning from ERL first, as ERL can interrupt EXL, for example when an NMI is taken. KVM however checks EXL first. Fix the order of the checks to match the pseudocode in the instruction set manual. Fixes: e685c689 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by:
-
Lucas Stach authored
commit 537b4b46 upstream. The read is taking a considerable amount of time (about 50us on this machine). The register does not ever hold anything other than the ring ID that is updated in this exact function, so there is no need for the read modify write cycle. This chops off a big chunk of the time spent in hardirq disabled context, as this function is called multiple times in the interrupt handler. With this change applied radeon won't show up in the list of the worst IRQ latency offenders anymore, where it was a regular before. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Lucas Stach <dev@lynxeye.de> Signed-off-by:
-
Arnd Bergmann authored
commit 34eee70a upstream. The ad5933_i2c_read function returns an error code to indicate whether it could read data or not. However ad5933_work() ignores this return code and just accesses the data unconditionally, which gets detected by gcc as a possible bug: drivers/staging/iio/impedance-analyzer/ad5933.c: In function 'ad5933_work': drivers/staging/iio/impedance-analyzer/ad5933.c:649:16: warning: 'status' may be used uninitialized in this function [-Wmaybe-uninitialized] This adds minimal error handling so we only evaluate the data if it was correctly read. Link: https://patchwork.kernel.org/patch/8110281/Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Takashi Iwai authored
commit 1a3f0991 upstream. ASRock B150M Pro4/D3 mobo with ALC892 codec doesn't seem to provide proper pins for the surround outputs, hence we need to specify the pincfgs manually with a couple of other corrections. Reported-and-tested-by:
Benjamin Valentin <benpicco@googlemail.com> Signed-off-by:
-
Long Li authored
commit 407a3aee upstream. The host keeps sending heartbeat packets independent of the guest responding to them. Even though we respond to the heartbeat messages at interrupt level, we can have situations where there maybe multiple heartbeat messages pending that have not been responded to. For instance this occurs when the VM is paused and the host continues to send the heartbeat messages. Address this issue by draining and responding to all the heartbeat messages that maybe pending. Signed-off-by:
Long Li <longli@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Kashyap Desai authored
commit 1e793f6f upstream. Commit 02b01e01 ("megaraid_sas: return sync cache call with success") modified the driver to successfully complete SYNCHRONIZE_CACHE commands without passing them to the controller. Disk drive caches are only explicitly managed by controller firmware when operating in RAID mode. So this commit effectively disabled writeback cache flushing for any drives used in JBOD mode, leading to data integrity failures. [mkp: clarified patch description] Fixes: 02b01e01Signed-off-by:
Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by:
Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
-
Alexander Usyskin authored
commit 43605e29 upstream. SEC registers are not accessible when the TXE device is in low power state, hence the SEC interrupt cannot be processed if device is not awake. In some rare cases entrance to low power state (aliveness off) and input ready bits can be signaled at the same time, resulting in communication stall as input ready won't be signaled again after waking up. To resolve this IPC_HHIER_SEC bit in HHISR_REG should not be cleaned if the interrupt is not processed. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
tang.junhui authored
commit dafa724b upstream. dm_get_target_type() was previously called so any error returned from dm_table_add_target() must first call dm_put_target_type(). Otherwise the DM target module's reference count will leak and the associated kernel module will be unable to be removed. Also, leverage the fact that r is already -EINVAL and remove an extra newline. Fixes: 36a0456f ("dm table: add immutable feature") Fixes: cc6cbe14 ("dm table: add always writeable feature") Fixes: 3791e2fc ("dm table: add singleton feature") Signed-off-by:
tang.junhui <tang.junhui@zte.com.cn> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> [bwh: Backported to 3.16: adjuat context] Signed-off-by:
-
Punit Agrawal authored
commit 806487a8 upstream. Although ghes_proc() tests for errors while reading the error status, it always return success (0). Fix this by propagating the return value. Fixes: d334a491 (ACPI, APEI, Generic Hardware Error Source memory error support) Signed-of-by:
Punit Agrawal <punit.agrawa.@arm.com> Tested-by:
Tyler Baicar <tbaicar@codeaurora.org> Reviewed-by:
Borislav Petkov <bp@suse.de> [ rjw: Subject ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
WANG Cong authored
commit 396a30cc upstream. This reverts commit a681574c ("ipv4: disable BH in set_ping_group_range()") because we never read ping_group_range in BH context (unlike local_port_range). Then, since we already have a lock for ping_group_range, those using ip_local_ports.lock for ping_group_range are clearly typos. We might consider to share a same lock for both ping_group_range and local_port_range w.r.t. space saving, but that should be for net-next. Fixes: a681574c ("ipv4: disable BH in set_ping_group_range()") Fixes: ba6b918a ("ping: move ping_group_range out of CONFIG_SYSCTL") Cc: Eric Dumazet <edumazet@google.com> Cc: Eric Salo <salo@google.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: we never applied "ipv4: disable BH in set_ping_group_range()"] Signed-off-by:
-
Segher Boessenkool authored
commit 80f23935 upstream. PowerPC's "cmp" instruction has four operands. Normally people write "cmpw" or "cmpd" for the second cmp operand 0 or 1. But, frequently people forget, and write "cmp" with just three operands. With older binutils this is silently accepted as if this was "cmpw", while often "cmpd" is wanted. With newer binutils GAS will complain about this for 64-bit code. For 32-bit code it still silently assumes "cmpw" is what is meant. In this instance the code comes directly from ISA v2.07, including the cmp, but cmpd is correct. Backport to stable so that new toolchains can build old kernels. Fixes: 948cf67c ("powerpc: Add NAP mode support on Power7 in HV mode") Reviewed-by:
Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by:
Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> [bwh: Backported to 3.16: adjust filename] Signed-off-by:
-
Will Deacon authored
commit 60e21a0e upstream. The WnR bit in the HSR/ESR_EL2 indicates whether a data abort was generated by a read or a write instruction. For stage 2 data aborts generated by a stage 1 translation table walk (i.e. the actual page table access faults at EL2), the WnR bit therefore reports whether the instruction generating the walk was a load or a store, *not* whether the page table walker was reading or writing the entry. For page tables marked as read-only at stage 2 (e.g. due to KSM merging them with the tables from another guest), this could result in livelock, where a page table walk generated by a load instruction attempts to set the access flag in the stage 1 descriptor, but fails to trigger CoW in the host since only a read fault is reported. This patch modifies the arm64 kvm_vcpu_dabt_iswrite function to take into account stage 2 faults in stage 1 walks. Since DBM cannot be disabled at EL2 for CPUs that implement it, we assume that these faults are always causes by writes, avoiding the livelock situation at the expense of occasional, spurious CoWs. We could, in theory, do a bit better by checking the guest TCR configuration and inspecting the page table to see why the PTE faulted. However, I doubt this is measurable in practice, and the threat of livelock is real. Cc: Julien Grall <julien.grall@arm.com> Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> [bwh: Backported to 3.16: - Keep using ESR_EL2_WNR in the first part of the condition - Adjust context] Signed-off-by:
-
Tom St Denis authored
commit fb9a5b0c upstream. Limit clocks on a specific HD86xx part to avoid crashes (while awaiting an appropriate PP fix). Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
-
Johan Hovold authored
commit 126d26f6 upstream. Make sure we have at least one port before attempting to register a console. Currently, at least one driver binds to a "dummy" interface and requests zero ports for it. Should such an interface also lack endpoints, we get a NULL-deref during probe. Fixes: e5b1e206 ("USB: serial: make minor allocation dynamic") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Mathias Nyman authored
commit 346e9973 upstream. If a device is unplugged and replugged during Sx system suspend some Intel xHC hosts will overwrite the CAS (Cold attach status) flag and no device connection is noticed in resume. A device in this state can be identified in resume if its link state is in polling or compliance mode, and the current connect status is 0. A device in this state needs to be warm reset. Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8 Observed on Cherryview and Apollolake as they go into compliance mode if LFPS times out during polling, and re-plugged devices are not discovered at resume. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
commit 4c39135a upstream. xHC in Wildcatpoint-LP PCH is similar to LynxPoint-LP and need the same quirks to prevent machines from spurious restart while shutting them down. Reported-by:
Hasan Mahmood <hasan.mahm@gmail.com> Signed-off-by:
-
Dinesh Israni authored
commit 926317de upstream. This patch addresses a bug where a local EXTENDED_COPY WRITE or READ backend I/O request would always return SAM_STAT_CHECK_CONDITION, even if underlying xcopy_pt_cmd->se_cmd generated a different SCSI status code. ESX host environments expect to hit SAM_STAT_RESERVATION_CONFLICT for certain scenarios, and SAM_STAT_CHECK_CONDITION results in non-retriable status for these cases. Tested on v4.1.y with ESX v5.5u2+ with local IBLOCK backend copy. Reported-by:
Nixon Vincent <nixon.vincent@calsoftinc.com> Tested-by:
Dinesh Israni <ddi@datera.io> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
commit 449a1378 upstream. This patch addresses a bug where EXTENDED_COPY across multiple LUNs results in a CHECK_CONDITION when the source + destination are not located on the same physical node. ESX Host environments expect sense COPY_ABORTED w/ COPY TARGET DEVICE NOT REACHABLE to be returned when this occurs, in order to signal fallback to local copy method. As described in section 6.3.3 of spc4r22: "If it is not possible to complete processing of a segment because the copy manager is unable to establish communications with a copy target device, because the copy target device does not respond to INQUIRY, or because the data returned in response to INQUIRY indicates an unsupported logical unit, then the EXTENDED COPY command shall be terminated with CHECK CONDITION status, with the sense key set to COPY ABORTED, and the additional sense code set to COPY TARGET DEVICE NOT REACHABLE." Tested on v4.1.y with ESX v5.5u2+ with BlockCopy across multiple nodes. Reported-by:
-
Richard Weinberger authored
commit c83ed4c9 upstream. If UBIFS is facing an error while walking a directory, it reports this error and ubifs_readdir() returns the error code. But the VFS readdir logic does not make the getdents system call fail in all cases. When the readdir cursor indicates that more entries are present, the system call will just return and the libc wrapper will try again since it also knows that more entries are present. This causes the libc wrapper to busy loop for ever when a directory is corrupted on UBIFS. A common approach do deal with corrupted directory entries is skipping them by setting the cursor to the next entry. On UBIFS this approach is not possible since we cannot compute the next directory entry cursor position without reading the current entry. So all we can do is setting the cursor to the "no more entries" position and make getdents exit. Signed-off-by:
Richard Weinberger <richard@nod.at> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Richard Weinberger authored
commit 843741c5 upstream. When the operation fails we also have to undo the changes we made to ->xattr_names. Otherwise listxattr() will report wrong lengths. Signed-off-by:
-
Patrick Scheuring authored
commit da25311c upstream. The Schenker XMG C504 is a rebranded Gigabyte P35 v2 laptop. Therefore it also needs a keyboard reset to detect the Elantech touchpad. Otherwise the touchpad appears to be dead. With this patch the touchpad is detected: $ dmesg | grep -E "(i8042|Elantech|elantech)" [ 2.675399] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.680372] i8042: Attempting to reset device connected to KBD port [ 2.789037] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.791586] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.813840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.811431] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f0e) [ 3.825424] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f. [ 3.839424] psmouse serio1: elantech: Elan sample query result 03, 58, 74 [ 3.911349] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 Signed-off-by:
Patrick Scheuring <patrick.scheuring.dev@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Andrew Lutomirski authored
commit 6d4952d9 upstream. hw_random carefully avoids using a stack buffer except in add_early_randomness(). This causes a crash in virtio_rng if CONFIG_VMAP_STACK=y. Reported-by:
Matt Mullins <mmullins@mmlx.us> Tested-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Nikolay Aleksandrov authored
commit 7cb3f921 upstream. Satish reported a problem with the perm multicast router ports not getting reenabled after some series of events, in particular if it happens that the multicast snooping has been disabled and the port goes to disabled state then it will be deleted from the router port list, but if it moves into non-disabled state it will not be re-added because the mcast snooping is still disabled, and enabling snooping later does nothing. Here are the steps to reproduce, setup br0 with snooping enabled and eth1 added as a perm router (multicast_router = 2): 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show <empty> At this point we have mcast enabled and eth1 as a perm router (value = 2) but it is not in the router list which is incorrect. After this change: 1. $ echo 0 > /sys/class/net/br0/bridge/multicast_snooping 2. $ ip l set eth1 down ^ This step deletes the interface from the router list 3. $ ip l set eth1 up ^ This step does not add it again because mcast snooping is disabled 4. $ echo 1 > /sys/class/net/br0/bridge/multicast_snooping 5. $ bridge -d -s mdb show router ports on br0: eth1 Note: we can directly do br_multicast_enable_port for all because the querier timer already has checks for the port state and will simply expire if it's in blocking/disabled. See the comment added by commit 9aa66382 ("bridge: multicast: add a comment to br_port_state_selection about blocking state") Fixes: 561f1103 ("bridge: Add multicast_snooping sysfs toggle") Reported-by:
Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Jan Kara authored
commit a2ed0b39 upstream. When isofs_mount() is called to mount a device read-write, it returns EACCES even before it checks that the device actually contains an isofs filesystem. This may confuse mount(8) which then tries to mount all subsequent filesystem types in read-only mode. Fix the problem by returning EACCES only once we verify that the device indeed contains an iso9660 filesystem. Fixes: 17b7f7cfReported-by:
Kent Overstreet <kent.overstreet@gmail.com> Reported-by:
Karel Zak <kzak@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Ard Biesheuvel authored
commit 3ab7511e upstream. Commit 49d9e77e ("ALSA: hda - Fix system panic when DMA > 40 bits for Nvidia audio controllers") simply disabled any DMA exceeding 32 bits for NVidia devices, even though they are capable of performing DMA up to 40 bits. On some architectures (such as arm64), system memory is not guaranteed to be 32-bit addressable by PCI devices, and so this change prevents NVidia devices from working on platforms such as AMD Seattle. Since the original commit already mentioned that up to 40 bits of DMA is supported, and given that the code has been updated in the meantime to support a 40 bit DMA mask on other devices, revert commit 49d9e77e and explicitly set the DMA mask to 40 bits for NVidia devices. Fixes: 49d9e77e ('ALSA: hda - Fix system panic when DMA > 40 bits...') Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Dan Carpenter authored
commit 09525a09 upstream. We don't want to allow negatives here. Fixes: 36b701fa ('netfilter: nf_tables: validate maximum value of u32 netlink attributes') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Marc Zyngier authored
commit 85054035 upstream. Commit f436b2ac ("arm64: kernel: fix architected PMU registers unconditional access") made sure we wouldn't access unimplemented PMU registers, but also left MDCR_EL2 uninitialized in that case, leading to trap bits being potentially left set. Make sure we always write something in that register. Fixes: f436b2ac ("arm64: kernel: fix architected PMU registers unconditional access") Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Stefan Tauner authored
commit ca006f78 upstream. This adds support to ftdi_sio for the Infineon TriBoard TC2X7 engineering board for first-generation Aurix SoCs with Tricore CPUs. Mere addition of the device IDs does the job. Signed-off-by:
Stefan Tauner <stefan.tauner@technikum-wien.at> Signed-off-by:
-
