CRIS can use asm-generic's cmpxchg.h
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>

CRIS can use asm-generic's atomic.h.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>

The generic atomic bitops are the same as the CRIS-specific ones.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>

All of these are either unused or already provided by other headers, so
they can be removed.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>

The CRIS SMP code cannot be built since there is no (and appears to
never have been) a CONFIG_SMP Kconfig option in arch/cris/.  Remove it.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>

INIT_THREAD enables interrupts in the thread_struct's saved flags.  This
means that interrupts get enabled in the middle of context_switch()
while switching to new tasks that get forked off the init task during
boot.  Don't do this.

Fixes the following splat on boot with spinlock debugging on:

  BUG: spinlock cpu recursion on CPU#0, swapper/2
   lock: runqueues+0x0/0x47c, .magic: dead4ead, .owner: swapper/0,
  .owner_cpu: 0
  CPU: 0 PID: 2 Comm: swapper Not tainted 3.19.0-08796-ga747b55 #285

  Call Trace:
  [<c0032b80>] spin_bug+0x2a/0x36
  [<c0032c98>] do_raw_spin_lock+0xa2/0x126
  [<c01964b0>] _raw_spin_lock+0x20/0x2a
  [<c00286c8>] scheduler_tick+0x22/0x76
  [<c003db2c>] update_process_times+0x5e/0x72
  [<c0007a94>] timer_interrupt+0x4e/0x6a
  [<c00378d6>] handle_irq_event_percpu+0x54/0xf2
  [<c00379c4>] handle_irq_event+0x50/0x74
  [<c003988e>] handle_simple_irq+0x6c/0xbe
  [<c0037270>] generic_handle_irq+0x2a/0x36
  [<c0004c40>] do_IRQ+0x38/0x84
  [<c000662e>] crisv32_do_IRQ+0x54/0x60
  [<c0006204>] IRQ0x4b_interrupt+0x34/0x3c
  [<c0192baa>] __schedule+0x24a/0x532
  [<c00056b4>] ret_from_kernel_thread+0x0/0x14
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>

Al Viro noted that CRIS fails to handle multiple signals.

This fixes the problem for CRISv32 by making it use a C work_pending
handling loop similar to the ARM implementation in 0a267fa6
("ARM: 7472/1: pull all work_pending logics into C function").

This also happens to fixes the warnings which currently trigger on
CRISv32 due to do_signal() being called with interrupts disabled.

Test case (should die of the SIGSEGV which gets raised when setting up
the stack for SIGALRM, but instead reaches and executes the _exit(1)):

  #include <unistd.h>
  #include <signal.h>
  #include <sys/time.h>
  #include <err.h>

  static void handler(int sig) { }

  int main(int argc, char *argv[])
  {
  	int ret;
  	struct itimerval t1 = { .it_value = {1} };
  	stack_t ss = {
  		.ss_sp = NULL,
  		.ss_size = SIGSTKSZ,
  	};
  	struct sigaction action = {
  		.sa_handler = handler,
  		.sa_flags = SA_ONSTACK,
  	};

  	ret = sigaltstack(&ss, NULL);
  	if (ret < 0)
  		err(1, "sigaltstack");

  	sigaction(SIGALRM, &action, NULL);
   	setitimer(ITIMER_REAL, &t1, NULL);

  	pause();

  	_exit(1);

  	return 0;
  }
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Link: http://lkml.kernel.org/r/20121208074429.GC4939@ZenIV.linux.org.ukSigned-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>

Al Viro noted that CRIS is vulnerable to bogus restarts on sigreturn.

The fixes CRISv32 by using regs->exs as an additional indicator to
whether we should attempt to restart the syscall or not.  EXS is only
used in the sigtrap handling, and in that path we already have r9 (the
other indicator, which indicates if we're in a syscall or not) cleared.

Test case, a port of Al's ARM version from 653d48b2 ("arm: fix
really nasty sigreturn bug"):

  #include <unistd.h>
  #include <signal.h>
  #include <stdlib.h>
  #include <sys/time.h>
  #include <errno.h>

  void f(int n)
  {
  	register int r10 asm ("r10") = n;

          __asm__ __volatile__(
  		"ba	1f	\n"
  		"nop		\n"
  		"break	8	\n"
  		"1: ba	.	\n"
  		"nop		\n"
  		:
  		: "r" (r10)
  		: "memory");
  }

  void handler1(int sig) { }
  void handler2(int sig) { raise(1); }
  void handler3(int sig) { exit(0); }

  int main(int argc, char *argv[])
  {
          struct sigaction s = {.sa_handler = handler2};
          struct itimerval t1 = { .it_value = {1} };
          struct itimerval t2 = { .it_value = {2} };

          signal(1, handler1);

          sigemptyset(&s.sa_mask);
          sigaddset(&s.sa_mask, 1);
          sigaction(SIGALRM, &s, NULL);

          signal(SIGVTALRM, handler3);

          setitimer(ITIMER_REAL, &t1, NULL);
          setitimer(ITIMER_VIRTUAL, &t2, NULL);

          f(-513); /* -ERESTARTNOINTR */

          return 0;
  }
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Link: http://lkml.kernel.org/r/20121208074429.GC4939@ZenIV.linux.org.ukSigned-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>

r9 is used to determine whether syscall restarting must be performed or
not.  Unfortunately, r9 is never set to zero in the non-syscall path,
and r9 is on top of that a callee-saved register which can be set to
non-zero by the C functions that are called during IRQ handling.

This means that if r10 (used for the syscall return value) is one of the
-ERESTART* values when a hardware interrupt occurs which leads to a
signal being delivered to the process, the kernel will "restart" a
syscall which never occurred.  This will lead to the PC being moved back
by 2 on return to user space.

Fix the problem by setting r9 to zero in the interrupt path.

Test case (should loop forever but ends up executing the break 8 trap
instruction):

  #include <signal.h>
  #include <stdlib.h>
  #include <sys/time.h>

  void f(int n)
  {
  	register int r9 asm ("r9") = 1;
  	register int r10 asm ("r10") = n;

          __asm__ __volatile__(
  		"ba	1f	\n"
  		"nop		\n"
  		"break	8	\n"
  		"1: ba	.	\n"
  		"nop		\n"
  		:
  		: "r" (r9), "r" (r10)
  		: "memory");
  }

  void handler1(int sig) { }

  int main(int argc, char *argv[])
  {
          struct itimerval t1 = { .it_value = {1} };

          signal(SIGALRM, handler1);
          setitimer(ITIMER_REAL, &t1, NULL);

          f(-513); /* -ERESTARTNOINTR */

          return 0;
  }
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>

Only includes the devboard 88 (CRISv32) at the moment.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

Add a minimal device tree for the ETRAX FS SoC and the Axis 88 developer
board.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>

Add support for booting CRISv32 with a built-in device tree.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

Add support for IRQ domains to the CRISv32 interrupt controller.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

Enable GPIOLIB on CRIS so that we can use the generic GPIO APIs.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

Pull networking fixes from David Miller:

 1) Validate iov ranges before feeding them into iov_iter_init(), from
    Al Viro.

 2) We changed copy_from_msghdr_from_user() to zero out the msg_namelen
    is a NULL pointer is given for the msg_name.  Do the same in the
    compat code too.  From Catalin Marinas.

 3) Fix partially initialized tuples in netfilter conntrack helper, from
    Ian Wilson.

 4) Missing continue; statement in nft_hash walker can lead to crashes,
    from Herbert Xu.

 5) tproxy_tg6_check looks for IP6T_INV_PROTO in ->flags instead of
    ->invflags, fix from Pablo Neira Ayuso.

 6) Incorrect memory account of TCP FINs can result in negative socket
    memory accounting values.  Fix from Josh Hunt.

 7) Don't allow virtual functions to enable VLAN promiscuous mode in
    be2net driver, from Vasundhara Volam.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  netfilter: nft_compat: set IP6T_F_PROTO flag if protocol is set
  cx82310_eth: wait for firmware to become ready
  net: validate the range we feed to iov_iter_init() in sys_sendto/sys_recvfrom
  net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour
  be2net: use PCI MMIO read instead of config read for errors
  be2net: restrict MODIFY_EQ_DELAY cmd to a max of 8 EQs
  be2net: Prevent VFs from enabling VLAN promiscuous mode
  tcp: fix tcp fin memory accounting
  ipv6: fix backtracking for throw routes
  net: ethernet: pcnet32: Setup the SRAM and NOUFLO on Am79C97{3, 5}
  ipv6: call ipv6_proxy_select_ident instead of ipv6_select_ident in udp6_ufo_fragment
  netfilter: xt_TPROXY: fix invflags check in tproxy_tg6_check()
  netfilter: restore rule tracing via nfnetlink_log
  netfilter: nf_tables: allow to change chain policy without hook if it exists
  netfilter: Fix potential crash in nft_hash walker
  netfilter: Zero the tuple in nfnl_cthelper_parse_tuple()

Pull sparc fixes from David Miller:
 "Some perf bug fixes from David Ahern, and the fix for that nasty
  memmove() bug"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix several bugs in memmove().
  sparc: Touch NMI watchdog when walking cpus and calling printk
  sparc: perf: Add support M7 processor
  sparc: perf: Make counting mode actually work
  sparc: perf: Remove redundant perf_pmu_{en|dis}able calls

Firstly, handle zero length calls properly.  Believe it or not there
are a few of these happening during early boot.

Next, we can't just drop to a memcpy() call in the forward copy case
where dst <= src.  The reason is that the cache initializing stores
used in the Niagara memcpy() implementations can end up clearing out
cache lines before we've sourced their original contents completely.

For example, considering NG4memcpy, the main unrolled loop begins like
this:

     load   src + 0x00
     load   src + 0x08
     load   src + 0x10
     load   src + 0x18
     load   src + 0x20
     store  dst + 0x00

Assume dst is 64 byte aligned and let's say that dst is src - 8 for
this memcpy() call.  That store at the end there is the one to the
first line in the cache line, thus clearing the whole line, which thus
clobbers "src + 0x28" before it even gets loaded.

To avoid this, just fall through to a simple copy only mildly
optimized for the case where src and dst are 8 byte aligned and the
length is a multiple of 8 as well.  We could get fancy and call
GENmemcpy() but this is good enough for how this thing is actually
used.
Reported-by: David Ahern <david.ahern@oracle.com>
Reported-by: Bob Picco <bpicco@meloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull bugfix for md from Neil Brown:
 "One fix for md in 4.0-rc4

  Regression in recent patch causes crash on error path"

* tag 'md/4.0-rc4-fix' of git://neil.brown.name/md:
  md: fix problems with freeing private data after ->run failure.

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree,
they are:

1) Fix missing initialization of tuple structure in nfnetlink_cthelper
   to avoid mismatches when looking up to attach userspace helpers to
   flows, from Ian Wilson.

2) Fix potential crash in nft_hash when we hit -EAGAIN in
   nft_hash_walk(), from Herbert Xu.

3) We don't need to indicate the hook information to update the
   basechain default policy in nf_tables.

4) Restore tracing over nfnetlink_log due to recent rework to
   accomodate logging infrastructure into nf_tables.

5) Fix wrong IP6T_INV_PROTO check in xt_TPROXY.

6) Set IP6T_F_PROTO flag in nft_compat so we can use SYNPROXY6 and
   REJECT6 from xt over nftables.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull driver core fixes from Greg KH:
 "Here are two bugfixes for things reported.  One regression in kernfs,
  and another issue fixed in the LZ4 code that was fixed in the
  "upstream" codebase that solves a reported kernel crash

  Both have been in linux-next for a while"

* tag 'driver-core-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  LZ4 : fix the data abort issue
  kernfs: handle poll correctly on 'direct_read' files.

Pull char/misc fixes from Greg KH:
 "Here are three fixes for 4.0-rc5 that revert 3 PCMCIA patches that
  were merged in 4.0-rc1 that cause regressions.  So let's revert them
  for now and they will be reworked and resent sometime in the future.

  All have been tested in linux-next for a while"

* tag 'char-misc-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Revert "pcmcia: add a new resource manager for non ISA systems"
  Revert "pcmcia: fix incorrect bracketing on a test"
  Revert "pcmcia: add missing include for new pci resource handler"

Pull staging driver fixes from Greg KH:
 "Here are four small staging driver fixes, all for the vt6656 and
  vt6655 drivers, that resolve some reported issues with them.

  All of these patches have been in linux next for a while"

* tag 'staging-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  vt6655: Fix late setting of byRFType.
  vt6655: RFbSetPower fix missing rate RATE_12M
  staging: vt6656: vnt_rf_setpower: fix missing rate RATE_12M
  staging: vt6655: vnt_tx_packet fix dma_idx selection.

Pull tty/serial driver fix from Greg KH:
 "Here's a single 8250 serial driver that fixes a reported deadlock with
  the serial console and the tty driver.

  It's been in linux-next for a while now"

* tag 'tty-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_dw: Fix deadlock in LCR workaround

Pull USB / PHY driver fixes from Greg KH:
 "Here's a number of USB and PHY driver fixes for 4.0-rc5.

  The largest thing here is a revert of a gadget function driver patch
  that removes 500 lines of code.  Other than that, it's a number of
  reported bugs fixes and new quirk/id entries.

  All have been in linux-next for a while"

* tag 'usb-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
  usb: common: otg-fsm: only signal connect after switching to peripheral
  uas: Add US_FL_NO_ATA_1X for Initio Corporation controllers / devices
  USB: ehci-atmel: rework clk handling
  MAINTAINERS: add entry for USB OTG FSM
  usb: chipidea: otg: add a_alt_hnp_support response for B device
  phy: omap-usb2: Fix missing clk_prepare call when using old dt name
  phy: ti/omap: Fix modalias
  phy: core: Fixup return value of phy_exit when !pm_runtime_enabled
  phy: miphy28lp: Convert to devm_kcalloc and fix wrong sizof
  phy: miphy365x: Convert to devm_kcalloc and fix wrong sizeof
  phy: twl4030-usb: Remove redundant assignment for twl->linkstat
  phy: exynos5-usbdrd: Fix off-by-one valid value checking for args->args[0]
  phy: Find the right match in devm_phy_destroy()
  phy: rockchip-usb: Fixup rockchip_usb_phy_power_on failure path
  phy: ti-pipe3: Simplify ti_pipe3_dpll_wait_lock implementation
  phy: samsung-usb2: Remove NULL terminating entry from phys array
  phy: hix5hd2-sata: Check return value of platform_get_resource
  phy: exynos-dp-video: Kill exynos_dp_video_phy_pwr_isol function
  Revert "usb: gadget: zero: Add support for interrupt EP"
  Revert "xhci: Clear the host side toggle manually when endpoint is 'soft reset'"
  ...

ip6tables extensions check for this flag to restrict match/target to a
given protocol. Without this flag set, SYNPROXY6 returns an error.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Patrick McHardy <kaber@trash.net>

When the device is powered up, some (older) firmware versions fail to work
properly if we send commands before the boot is complete (everything is OK
when the device is hot-plugged). The firmware indicates its ready status by
putting the link up.
Newer firmwares delay the first command so they don't suffer from this problem.
They also report the link being always up.

Wait for firmware to become ready (link up) before sending any commands and/or
data.

This also allows lowering CMD_TIMEOUT value to a reasonable time.

Tested with 4.1.0.9 (old) and 4.1.0.30 (new) firmware versions.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull slave dmaengine fixes from Vinod Koul:
 "Four fixes for dw, pl08x, imx-sdma and at_hdmac driver.  Nothing
  unusual here, simple fixes to these drivers"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: pl08x: Define capabilities for generic capabilities reporting
  dmaengine: dw: append MODULE_ALIAS for platform driver
  dmaengine: imx-sdma: switch to dynamic context mode after script loaded
  dmaengine: at_hdmac: Fix calculation of the residual bytes

Pull power management and ACPI fixes from Rafael Wysocki:
 "These are fixes for recent regressions (PCI/ACPI resources and at91
  RTC locking), a stable-candidate powercap RAPL driver fix and two ARM
  cpuidle fixes (one stable-candidate too).

  Specifics:

   - Revert a recent PCI commit related to IRQ resources management that
     introduced a regression for drivers attempting to bind to devices
     whose previous drivers did not balance pci_enable_device() and
     pci_disable_device() as expected (Rafael J Wysocki).

   - Fix a deadlock in at91_rtc_interrupt() introduced by a typo in a
     recent commit related to wakeup interrupt handling (Dan Carpenter).

   - Allow the power capping RAPL (Running-Average Power Limit) driver
     to use different energy units for domains within one CPU package
     which is necessary to handle Intel Haswell EP processors correctly
     (Jacob Pan).

   - Improve the cpuidle mvebu driver's handling of Armada XP SoCs by
     updating the target residency and exit latency numbers for those
     chips (Sebastien Rannou).

   - Prevent the cpuidle mvebu driver from calling cpu_pm_enter() twice
     in a row before cpu_pm_exit() is called on the same CPU which
     breaks the core's assumptions regarding the usage of those
     functions (Gregory Clement)"

* tag 'pm+acpi-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "x86/PCI: Refine the way to release PCI IRQ resources"
  rtc: at91rm9200: double locking bug in at91_rtc_interrupt()
  powercap / RAPL: handle domains with different energy units
  cpuidle: mvebu: Update cpuidle thresholds for Armada XP SOCs
  cpuidle: mvebu: Fix the CPU PM notifier usage

Pull drm updates from Dave Airlie:
 "A bunch of fixes across drivers:

  radeon:
     disable two ended allocation for now, it breaks some stuff

  amdkfd:
     misc fixes

  nouveau:
     fix irq loop problem, add basic support for GM206 (new hw)

  i915:
     fix some WARNs people were seeing

  exynos:
     fix some iommu interactions causing boot failures"

* git://people.freedesktop.org/~airlied/linux:
  drm/radeon: drop ttm two ended allocation
  drm/exynos: fix the initialization order in FIMD
  drm/exynos: fix typo config name correctly.
  drm/exynos: Check for NULL dereference of crtc
  drm/exynos: IS_ERR() vs NULL bug
  drm/exynos: remove unused files
  drm/i915: Make sure the primary plane is enabled before reading out the fb state
  drm/nouveau/bios: fix i2c table parsing for dcb 4.1
  drm/nouveau/device/gm100: Basic GM206 bring up (as copy of GM204)
  drm/nouveau/device: post write to NV_PMC_BOOT_1 when flipping endian switch
  drm/nouveau/gr/gf100: fix some accidental or'ing of buffer addresses
  drm/nouveau/fifo/nv04: remove the loop from the interrupt handler
  drm/radeon: Changing number of compute pipe lines
  drm/amdkfd: Fix SDMA queue init. in non-HWS mode
  drm/amdkfd: destroy mqd when destroying kernel queue
  drm/i915: Ensure plane->state->fb stays in sync with plane->fb

Merge tag 'devicetree-fixes-for-4.0-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull more DeviceTree fixes vfom Rob Herring:

 - revert setting stdout-path as preferred console.  This caused
   regressions in PowerMACs and other systems.

 - yet another fix for stdout-path option parsing.

 - fix error path handling in of_irq_parse_one

* tag 'devicetree-fixes-for-4.0-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  Revert "of: Fix premature bootconsole disable with 'stdout-path'"
  of: handle both '/' and ':' in path strings
  of: unittest: Add option string test case with longer path
  of/irq: Fix of_irq_parse_one() returned error codes

Pull SCSI target fixes from Nicholas Bellinger:
 "Here are current target-pending fixes for v4.0-rc5 code that have made
  their way into the queue over the last weeks.

  The fixes this round include:

   - Fix long-standing iser-target logout bug related to early
     conn_logout_comp completion, resulting in iscsi_conn use-after-tree
     OOpsen.  (Sagi + nab)

   - Fix long-standing tcm_fc bug in ft_invl_hw_context() failure
     handing for DDP hw offload.  (DanC)

   - Fix incorrect use of unprotected __transport_register_session() in
     tcm_qla2xxx + other single local se_node_acl fabrics.  (Bart)

   - Fix reference leak in target_submit_cmd() -> target_get_sess_cmd()
     for ack_kref=1 failure path.  (Bart)

   - Fix pSCSI backend ->get_device_type() statistics OOPs with
     un-configured device.  (Olaf + nab)

   - Fix virtual LUN=0 target_configure_device failure OOPs at modprobe
     time.  (Claudio + nab)

   - Fix FUA write false positive failure regression in v4.0-rc1 code.
     (Christophe Vu-Brugier + HCH)"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: do not reject FUA CDBs when write cache is enabled but emulate_write_cache is 0
  target: Fix virtual LUN=0 target_configure_device failure OOPs
  target/pscsi: Fix NULL pointer dereference in get_device_type
  tcm_fc: missing curly braces in ft_invl_hw_context()
  target: Fix reference leak in target_get_sess_cmd() error path
  loop/usb/vhost-scsi/xen-scsiback: Fix use of __transport_register_session
  tcm_qla2xxx: Fix incorrect use of __transport_register_session
  iscsi-target: Avoid early conn_logout_comp for iser connections
  Revert "iscsi-target: Avoid IN_LOGOUT failure case for iser-target"
  target: Disallow changing of WRITE cache/FUA attrs after export

Pull devicemapper fixes from Mike Snitzer:
 "A handful of stable fixes for DM:
   - fix thin target to always zero-fill reads to unprovisioned blocks
   - fix to interlock device destruction's suspend from internal
     suspends
   - fix 2 snapshot exception store handover bugs
   - fix dm-io to cope with DISCARD and WRITE_SAME capabilities changing"

* tag 'dm-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm io: deal with wandering queue limits when handling REQ_DISCARD and REQ_WRITE_SAME
  dm snapshot: suspend merging snapshot when doing exception handover
  dm snapshot: suspend origin when doing exception handover
  dm: hold suspend_lock while suspending device during device deletion
  dm thin: fix to consistently zero-fill reads to unprovisioned blocks

Pull btrfs fixes from Chris Mason:
 "Most of these are fixing extent reservation accounting, or corners
  with tree writeback during commit.

  Josef's set does add a test, which isn't strictly a fix, but it'll
  keep us from making this same mistake again"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix outstanding_extents accounting in DIO
  Btrfs: add sanity test for outstanding_extents accounting
  Btrfs: just free dummy extent buffers
  Btrfs: account merges/splits properly
  Btrfs: prepare block group cache before writing
  Btrfs: fix ASSERT(list_empty(&cur_trans->dirty_bgs_list)
  Btrfs: account for the correct number of extents for delalloc reservations
  Btrfs: fix merge delalloc logic
  Btrfs: fix comp_oper to get right order
  Btrfs: catch transaction abortion after waiting for it
  btrfs: fix sizeof format specifier in btrfs_check_super_valid()

Pull nfsd bufix from Bruce Fields:
 "This is a fix for a crash easily triggered by 4.1 activity to a server
  built with CONFIG_NFSD_PNFS.

  There are some more bugfixes queued up that I intend to pass along
  next week, but this is the most critical"

* 'for-4.0' of git://linux-nfs.org/~bfields/linux:
  Subject: nfsd: don't recursively call nfsd4_cb_layout_fail

Pull UBI fix from Artem Bityutskiy:
 "This fixes a bug introduced during the v4.0 merge window where we
  forgot to put braces where they should be"

* tag 'upstream-4.0-rc5' of git://git.infradead.org/linux-ubifs:
  UBI: fix missing brace control flow

Pull arm64 fixes from Catalin Marinas:

 - mm switching fix where the kernel pgd ends up in the user TTBR0 after
   returning from an EFI run-time services call

 - fix __GFP_ZERO handling for atomic pool and CMA DMA allocations (the
   generic code does get the gfp flags, so it's left with the arch code
   to memzero accordingly)

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Honor __GFP_ZERO in dma allocations
  arm64: efi: don't restore TTBR0 if active_mm points at init_mm

Pull ARM fixes from Russell King:
 "Another few ARM fixes.  Fabrice fixed the L2 cache DT parsing to allow
  prefetch configuration to be specified even when the cache size
  parsing fails.

  Laura noticed that the setting of page attributes wasn't working for
  modules due to is_module_addr() always returning false.

  Marc Gonzalez (aka Mason) noticed a potential latent bug with the way
  we read one of the CPUID registers (where we could attempt to read a
  non-present CPUID register which may fault.)

  I've fixed an issue where 32-bit DMA masks were failing with memory
  which extended to the top of physical address space, and I've also
  added debugging output of the page tables when we hit a data access
  exception which we don't specifically handle - prompted by the lack of
  information in a bug report"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8313/1: Use read_cpuid_ext() macro instead of inline asm
  ARM: 8311/1: Don't use is_module_addr in setting page attributes
  ARM: 8310/1: l2c: Fix prefetch settings dt parsing
  ARM: dump pgd, pmd and pte states on unhandled data abort faults
  ARM: dma-api: fix off-by-one error in __dma_supported()

* pm-cpuidle:
  cpuidle: mvebu: Update cpuidle thresholds for Armada XP SOCs
  cpuidle: mvebu: Fix the CPU PM notifier usage

* powercap:
  powercap / RAPL: handle domains with different energy units

* irq-pm:
  rtc: at91rm9200: double locking bug in at91_rtc_interrupt()

* acpi-resources:
  Revert "x86/PCI: Refine the way to release PCI IRQ resources"

If ->run() fails, it can either free the data structures it
allocated, or leave that task to ->free() which will be called
on failures.

However:
  md.c calls ->free() even if ->private_data is NULL, which
     causes problems in some personalities.
  raid0.c frees the data, but doesn't clear ->private_data,
     which will become a problem when we fix md.c

So better fix both these issues at once.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Fixes: 5aa61f42
URL: https://bugzilla.kernel.org/show_bug.cgi?id=94381Signed-off-by: NeilBrown <neilb@suse.de>