- 15 Jun, 2023 40 commits
-
-
Christian König authored
Instead of using the VRAM lost counter add a 64bit token which indicates if a context or job is still valid to use. Should the VRAM be lost or the page tables need re-creation the token will change indicating that userspace needs to act and re-create the contexts and re-submit the work. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Luben Tuikov <luben.tuikov@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
When some problem with the updates of page tables is detected reset the state machine of the VM and re-create all page tables from scratch. Signed-off-by:
-
Christian König authored
Forward errors from previous submissions to this one. Signed-off-by:
-
Christian König authored
Set the fence error code before trying to soft-recover it. It gets overwritten when a hard recovery is required. Signed-off-by:
-
Christian König authored
When we force complete fences we should mark them as canceled. Signed-off-by:
-
Christian König authored
This allows us to insert some error codes into the bottom of the pipeline on an engine. Signed-off-by:
-
Alex Deucher authored
Mark as experimental for now until we get closer to production to avoid possible undesireable behavior when mixing newer boards with older kernels. Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Lijo Lazar authored
Use PSP firmware interface for switching compute partitions. Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Le Ma <le.ma@amd.com> Acked-by:
-
Lijo Lazar authored
PARTITION_MODE field in PARTITION_COMPUTE_STATUS register is defined as below by firmware. SPX = 0, DPX = 1, TPX = 2, QPX = 3, CPX = 4 Change driver definition accordingly. Signed-off-by:
-
Christian König authored
It's perfectly possible that the BO is about to be destroyed and doesn't have a backing store associated with it. Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Tested-by:
Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by:
-
Christian König authored
We need to grab the lock of the BO or otherwise can run into a crash when we try to inspect the current location. Signed-off-by:
-
Stanley.Yang authored
Do not compare injection address with mc_vram_size if mc_vram_size is zero. Signed-off-by:
Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
Stanley.Yang authored
Using "is_app_apu" to identify device in the native APU mode or carveout mode. Signed-off-by:
-
Candice Li authored
Add disabled channel number to ras init flags. Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
-
Candice Li authored
Update total channel number for umc v8_10. Signed-off-by:
-
Candice Li authored
Update eccinfo table structure according to smu v13_0_0 interface. v2: Calculate array size instead of using macro definition. Signed-off-by:
-
Srinivasan Shanmugam authored
Fixes the following gcc with W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:3483: warning: Cannot understand * ******************************************************************************* drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4204: warning: Cannot understand * ******************************************************************************* Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Jonathan Kim authored
Queue count should decrement on queue destruction regardless of HWS support type. Signed-off-by:
Jonathan Kim <jonathan.kim@amd.com> Reviewed-by:
Felix Kuehling <felix.kuehling@amd.com> Signed-off-by:
-
Tim Huang authored
This patch enables following UMD stable Pstates profile levels for power_dpm_force_performance_level interface. - profile_peak - profile_min_sclk - profile_standard Signed-off-by:
Tim Huang <Tim.Huang@amd.com> Acked-by:
Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Fixes the following gcc with W=1: drivers/gpu/drm/radeon/radeon_atpx_handler.c:64:6: warning: no previous prototype for ‘radeon_has_atpx’ [-Wmissing-prototypes] 64 | bool 4(void) { | ^~~~~~~~~~~~~~~ drivers/gpu/drm/radeon/radeon_atpx_handler.c:68:6: warning: no previous prototype for ‘radeon_has_atpx_dgpu_power_cntl’ [-Wmissing-prototypes] 68 | bool radeon_has_atpx_dgpu_power_cntl(void) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/radeon/radeon_atpx_handler.c:72:6: warning: no previous prototype for ‘radeon_is_atpx_hybrid’ [-Wmissing-prototypes] 72 | bool radeon_is_atpx_hybrid(void) { | ^~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/radeon/radeon_atpx_handler.c:77:6: warning: no previous prototype for ‘radeon_atpx_dgpu_req_power_for_displays’ [-Wmissing-prototypes] 77 | bool radeon_atpx_dgpu_req_power_for_displays(void) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/radeon/radeon_atpx_handler.c:596:6: warning: no previous prototype for ‘radeon_register_atpx_handler’ [-Wmissing-prototypes] 596 | void radeon_register_atpx_handler(void) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/radeon/radeon_atpx_handler.c:614:6: warning: no previous prototype for ‘radeon_unregister_atpx_handler’ [-Wmissing-prototypes] 614 | void radeon_unregister_atpx_handler(void) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/radeon/radeon_atpx_handler.c:159: warning: expecting prototype for radeon_atpx_validate_functions(). Prototype was for radeon_atpx_validate() instead Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: -
Luben Tuikov authored
The fixed commit listed in the Fixes tag below, introduced a bug in amdgpu_ras.c::amdgpu_reserve_page_direct(), in that when introducing the new amdgpu_umc_fill_error_record() and internally in that new function the physical address (argument "uint64_t retired_page"--wrong name) is right-shifted by AMDGPU_GPU_PAGE_SHIFT. Thus, in amdgpu_reserve_page_direct() when we pass "address" to that new function, we should NOT right-shift it, since this results, erroneously, in the page address to be 0 for first 2^(2*AMDGPU_GPU_PAGE_SHIFT) memory addresses. This commit fixes this bug. Cc: Tao Zhou <tao.zhou1@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Fixes: 400013b2 ("drm/amdgpu: add umc_fill_error_record to make code more simple") Signed-off-by:
-
Alex Deucher authored
The wptr needs to be incremented at at least 64 dword intervals, use 256 to align with windows. This should fix potential hangs with unaligned updates. Reviewed-by:
Aaron Liu <aaron.liu@amd.com> Reviewed-by:
-
Luben Tuikov authored
Report the number of records stored in the RAS EEPROM table in debugfs. This can be used by user-space to calculate the capacity of the RAS EEPROM table since "bad_page_cnt_threshold" is also reported in the same place in debugfs. See commit 7fb64071 ("drm/amdgpu: Add bad_page_cnt_threshold to debugfs"). ras_num_recs can already be inferred by dumping the RAS EEPROM table, also in the same debugfs location, see commit reference c65b0805 (drm/amdgpu: RAS EEPROM table is now in debugfs, 2021-04-08). This commit makes it an integer value easily shown in a single file. Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Tao Zhou <tao.zhou1@amd.com> Cc: Stanley Yang <Stanley.Yang@amd.com> Cc: John Clements <john.clements@amd.com> Signed-off-by:
-
Mukul Joshi authored
Remove DUMMY_VRAM_SIZE as it is not needed and can result in reporting incorrect memory size. Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Acked-by:
-
Lijo Lazar authored
Release ECC irq only if irq is enabled - only when RAS feature is enabled ECC irq gets enabled. Signed-off-by:
-
Likun Gao authored
Spirom update typically requires extremely long duration for command execution, and special helper function to wait for it completion. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
-
Srinivasan Shanmugam authored
Fixes the following W=1 kernel build warning: display/dc/dcn10/dcn10_optc.c:45: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * apply_front_porch_workaround TODO FPGA still need? display/dc/dcn10/dcn10_optc.c:136: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * program_timing_generator used by mode timing set display/dc/dcn10/dcn10_optc.c:391: warning: Function parameter or member 'optc' not described in 'optc1_set_timing_double_buffer' display/dc/dcn10/dcn10_optc.c:391: warning: Function parameter or member 'enable' not described in 'optc1_set_timing_double_buffer' display/dc/dcn10/dcn10_optc.c:404: warning: Function parameter or member 'optc' not described in 'optc1_unblank_crtc' display/dc/dcn10/dcn10_optc.c:404: warning: expecting prototype for unblank_crtc(). Prototype was for optc1_unblank_crtc() instead display/dc/dcn10/dcn10_optc.c:427: warning: Function parameter or member 'optc' not described in 'optc1_blank_crtc' display/dc/dcn10/dcn10_optc.c:427: warning: expecting prototype for blank_crtc(). Prototype was for optc1_blank_crtc() instead display/dc/dcn10/dcn10_optc.c:496: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Enable CRTC display/dc/dcn10/dcn10_optc.c:895: warning: Cannot understand ***************************************************************************** on line 895 - I thought it was a doc line Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Fixes the following gcc with W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:285: warning: Function parameter or member 'dc' not described in 'dcn32_determine_det_override' drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:285: warning: Function parameter or member 'context' not described in 'dcn32_determine_det_override' drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:285: warning: Function parameter or member 'pipes' not described in 'dcn32_determine_det_override' drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:624: warning: Cannot understand * ***************************************************************** drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:676: warning: Cannot understand * ***************************************************************** Cc: Alvin Lee <alvin.lee2@amd.com> Cc: Stylon Wang <stylon.wang@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
Alvin Lee <alvin.lee2@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_optc.c:109: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Enable CRTC Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Fixes the following gcc with W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:872: warning: Excess function parameter 'drr_pipe' description in 'subvp_drr_schedulable' drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:1030: warning: Cannot understand * **************************************************** Cc: Stylon Wang <stylon.wang@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Fixes the following W=1 kernel build warning: display/dc/dcn10/dcn10_opp.c:52: warning: Function parameter or member 'oppn10' not described in 'opp1_set_truncation' display/dc/dcn10/dcn10_opp.c:52: warning: Function parameter or member 'params' not described in 'opp1_set_truncation' display/dc/dcn10/dcn10_opp.c:52: warning: expecting prototype for set_truncation(). Prototype was for opp1_set_truncation() instead display/dc/dcn10/dcn10_opp.c:161: warning: Function parameter or member 'oppn10' not described in 'opp1_set_pixel_encoding' display/dc/dcn10/dcn10_opp.c:161: warning: Function parameter or member 'params' not described in 'opp1_set_pixel_encoding' display/dc/dcn10/dcn10_opp.c:161: warning: expecting prototype for set_pixel_encoding(). Prototype was for opp1_set_pixel_encoding() instead display/dc/dcn10/dcn10_opp.c:183: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Set Clamping Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
drm/amdgpu: Add missing function parameter 'optc' & 'enable' to kdoc in optc3_set_timing_double_buffer() Fixes the following gcc with W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_optc.c:285: warning: Function parameter or member 'optc' not described in 'optc3_set_timing_double_buffer' drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_optc.c:285: warning: Function parameter or member 'enable' not described in 'optc3_set_timing_double_buffer' Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
Ma Jun authored
Modify the debug information and print the clien id for these interrupts as well. Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Reviewed-by:
-
Ruili Ji authored
Flag trap_en should be enabled for trap handler. Signed-off-by:
Ruili Ji <ruiliji2@amd.com> Signed-off-by:
-
Alex Deucher authored
Don't free the memory if we are hitting this as part of suspend. This way we don't free any memory during suspend; see amdgpu_bo_free_kernel(). The memory will be freed in the first non-suspend modeset or when the driver is torn down. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2568Acked-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
-
Alex Deucher authored
This reverts commit 58e67bb3. This patch was reverted, but came back again as commit 58e67bb3 ("drm/amd/display: fix dpms_off issue when disabling bios mode") Revert it again as it breaks Asus G513QY / 6800M laptops. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2259 Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Zhongwei <Zhongwei.Zhang@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Mike Lothian <mike@fireburn.co.uk> Reviewed-by:
-
Jonathan Kim authored
Null check should be done on queue struct itself and not on the process queue list node. Signed-off-by:
-
Tim Huang authored
Add the ability to control the vclk and dclk frequency by power_dpm_force_performance_level interface. Signed-off-by:
-
Srinivasan Shanmugam authored
Fixes the following gcc with W=1: In file included from ./include/linux/string.h:253, from ./include/linux/bitmap.h:11, from ./include/linux/cpumask.h:12, from ./arch/x86/include/asm/cpumask.h:5, from ./arch/x86/include/asm/msr.h:11, from ./arch/x86/include/asm/processor.h:22, from ./arch/x86/include/asm/cpufeature.h:5, from ./arch/x86/include/asm/thread_info.h:53, from ./include/linux/thread_info.h:60, from ./arch/x86/include/asm/preempt.h:7, from ./include/linux/preempt.h:78, from ./include/linux/spinlock.h:56, from ./include/linux/mmzone.h:8, from ./include/linux/gfp.h:7, from ./include/linux/firmware.h:7, from drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/sienna_cichlid_ppt.c:26: In function ‘fortify_memcpy_chk’, inlined from ‘sienna_cichlid_append_powerplay_table’ at drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/sienna_cichlid_ppt.c:444:2, inlined from ‘sienna_cichlid_setup_pptable’ at drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/sienna_cichlid_ppt.c:506:8, inlined from ‘sienna_cichlid_setup_pptable’ at drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/sienna_cichlid_ppt.c:494:12: ./include/linux/fortify-string.h:413:4: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 413 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ the compiler complains about the size calculation in the memcpy() - "sizeof(*smc_dpm_table) - sizeof(smc_dpm_table->table_header)" is much larger than what fits into table_member. Hence, reuse 'smu_memcpy_trailing' for nv1x Fixes: 7077b19a ("drm/amd/pm: use macro to get pptable members") Suggested-by:Evan Quan <Evan.Quan@amd.com> Cc: Evan Quan <Evan.Quan@amd.com> Cc: Chengming Gui <Jack.Gui@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Tim Huang authored
PMFW use the left-shifted 16 bits argument to set the VCLK DPM frequency for SMU v13.0.5. Signed-off-by:
-
