Skip to content

L
linux
Switch branch/tag
  1. 21 Apr, 2017 17 commits
    • Jens Axboe's avatar
      Merge branch 'nvme-4.12' of git://git.infradead.org/nvme into for-4.12/block · f8a05a1d
      Jens Axboe authored 
      Christoph writes:

This is the current NVMe pile: virtualization extensions, lots of FC
updates and various misc bits.  There are a few more FC bits that didn't
make the cut, but we'd like to get this request out before the merge
window for sure.
      f8a05a1d
    • Jens Axboe's avatar
      mtip32xx: fix dereference of stack garbage · 95c55ff4
      Jens Axboe authored 
      We need to get the command payload from the request before
we attempt to dereference it.

Fixes: 4dda4735 ("mtip32xx: add a status field to struct mtip_cmd")
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      95c55ff4
    • Junxiong Guan's avatar
      nvme: let dm-mpath distinguish nvme error codes · e02ab023
      Junxiong Guan authored 
      Currently most IOs which return the nvme error codes are retried on
the other path if those IOs returns EIO from NVMe driver. This
patch let Multipath distinguish nvme media error codes and some
generic or cmd-specific nvme error codes so that multipath will
not retry those kinds of IO, to save bandwidth.
Signed-off-by: default avatarJunxiong Guan <guanjunxiong@huawei.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      e02ab023
    • Keith Busch's avatar
      nvme/pci: Poll CQ on timeout · 7776db1c
      Keith Busch authored 
      If an IO timeout occurs, it's helpful to know if the controller did not
post a completion or the driver missed an interrupt. While we never expect
the latter, this patch will make it possible to tell the difference so
we don't have to guess.
Signed-off-by: default avatarKeith Busch <keith.busch@intel.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Tested-by: default avatarJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: default avatarJohannes Thumshirn <jthumshirn@suse.de>
      7776db1c
    • James Smart's avatar
      nvmet_fc: Change traddr field separator to a colon · 43631357
      James Smart authored 
      The FC-NVME spec revised syntax to avoid comma separators.
Sync with the change in the parser for traddr on port attachments.
Signed-off-by: default avatarJames Smart <james.smart@broadcom.com>
Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
      43631357
    • James Smart's avatar
      nvme_fc: Add ls aborts on remote port teardown · 8d64daf7
      James Smart authored 
      remoteport teardown never aborted the LS opertions. Add support.
Signed-off-by: default avatarJames Smart <james.smart@broadcom.com>
Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
      8d64daf7
    • James Smart's avatar
      nvme_fc: Move LS's to rport · c913a8b0
      James Smart authored 
      Link LS's on the remoteport rather than the controller. LS's are
between nport's. Makes more sense, especially on async teardown where
the controller is torn down regardless of the LS (LS is more of a notifier
to the target of the teardown), to have them on the remoteport.

While revising ls send/done routines, issues were seen relative to
refcounting and cleanup, especially in async path. Reworked these code
paths.
Signed-off-by: default avatarJames Smart <james.smart@broadcom.com>
Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
      c913a8b0
    • James Smart's avatar
      nvmet_fc: add missing reference in add_port · 568ad51e
      James Smart authored 
      Add missing reference in add_port
Signed-off-by: default avatarJames Smart <james.smart@broadcom.com>
Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
      568ad51e
    • James Smart's avatar
      nvmet_fc: Rework target side abort handling · a97ec51b
      James Smart authored 
      target transport:
----------------------
There are cases when there is a need to abort in-progress target
operations (writedata) so that controller termination or errors can
clean up. That can't happen currently as the abort is another target
op type, so it can't be used till the running one finishes (and it may
not).  Solve by removing the abort op type and creating a separate
downcall from the transport to the lldd to request an io to be aborted.

The transport will abort ios on queue teardown or io errors. In general
the transport tries to call the lldd abort only when the io state is
idle. Meaning: ops that transmit data (readdata or rsp) will always
finish their transmit (or the lldd will see a state on the
link or initiator port that fails the transmit) and the done call for
the operation will occur. The transport will wait for the op done
upcall before calling the abort function, and as the io is idle, the
io can be cleaned up immediately after the abort call; Similarly, ios
that are not waiting for data or transmitting data must be in the nvmet
layer being processed. The transport will wait for the nvmet layer
completion before calling the abort function, and as the io is idle,
the io can be cleaned up immediately after the abort call; As for ops
that are waiting for data (writedata), they may be outstanding
indefinitely if the lldd doesn't see a condition where the initiatior
port or link is bad. In those cases, the transport will call the abort
function and wait for the lldd's op done upcall for the operation, where
it will then clean up the io.

Additionally, if a lldd receives an ABTS and matches it to an outstanding
request in the transport, A new new transport upcall was created to abort
the outstanding request in the transport. The transport expects any
outstanding op call (readdata or writedata) will completed by the lldd and
the operation upcall made. The transport doesn't act on the reported
abort (e.g. clean up the io) until an op done upcall occurs, a new op is
attempted, or the nvmet layer completes the io processing.

fcloop:
----------------------
Updated to support the new target apis.
On fcp io aborts from the initiator, the loopback context is updated to
NULL out the half that has completed. The initiator side is immediately
called after the abort request with an io completion (abort status).
On fcp io aborts from the target, the io is stopped and the initiator side
sees it as an aborted io. Target side ops, perhaps in progress while the
initiator side is done, continue but noop the data movement as there's no
structure on the initiator side to reference.

patch also contains:
----------------------
Revised lpfc to support the new abort api

commonized rsp buffer syncing and nulling of private data based on
calling paths.

errors in op done calls don't take action on the fod. They're bad
operations which implies the fod may be bad.
Signed-off-by: default avatarJames Smart <james.smart@broadcom.com>
Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
      a97ec51b
    • James Smart's avatar
      nvme_fcloop: split job struct from transport for req_release · ce79bfc2
      James Smart authored 
      Current design has the fcloop job struct, used for both initiator and
target processing, allocated as part of the initiator request structure.
On aborts, the initiator side (based on the request) may terminate, yet
the target side wants to continue processing. the target side can't do
that if the initiator side goes away.
Revise fcloop to allocate an independent target side structure when it
starts an io from the initiator.

Added a lock to the request struct as well to synchronize pointer updates
on abort calls.

Modified target downcalls to recognize conditions where initiator has
aborted the io (thus nulled the pointer between job structs), thus
avoid referencing sgl lists which are gone and no longer making upcalls
to the initiator.

In conditions where the targetport is no longer connected, have the
initiator return an access failure rather than simulating a command
completion.
Signed-off-by: default avatarJames Smart <james.smart@broadcom.com>
Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
      ce79bfc2
    • James Smart's avatar
      nvmet_fc: add req_release to lldd api · 19b58d94
      James Smart authored 
      With the advent of the opdone calls changing context, the lldd can no
longer assume that once the op->done call returns for RSP operations
that the request struct is no longer being accessed.

As such, revise the lldd api for a req_release callback that the
transport will call when the job is complete. This will also be used
with abort cases.

Fixed text in api header for change in io complete semantics.

Revised lpfc to support the new req_release api.
Signed-off-by: default avatarJames Smart <james.smart@broadcom.com>
Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
      19b58d94
    • James Smart's avatar
      nvmet_fc: add target feature flags for upcall isr contexts · 39498fae
      James Smart authored 
      Two new feature flags were added to control whether upcalls to the
transport result in context switches or stay in the calling context.

NVMET_FCTGTFEAT_CMD_IN_ISR:
  By default, if the flag is not set, the transport assumes the
  lldd is in a non-isr context and in the cpu context it should be
  for the io queue. As such, the cmd handler is called directly in the
  calling context.
  If the flag is set, indicating the upcall is an isr context, the
  transport mandates a transition to a workqueue. The workqueue assigned
  to the queue is used for the context.
NVMET_FCTGTFEAT_OPDONE_IN_ISR
  By default, if the flag is not set, the transport assumes the
  lldd is in a non-isr context and in the cpu context it should be
  for the io queue. As such, the fcp operation done callback is called
  directly in the calling context.
  If the flag is set, indicating the upcall is an isr context, the
  transport mandates a transition to a workqueue. The workqueue assigned
  to the queue is used for the context.

Updated lpfc for flags
Signed-off-by: default avatarJames Smart <james.smart@broadcom.com>
Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
      39498fae
    • Logan Gunthorpe's avatar
      nvmet: convert from kmap to nvmet_copy_from_sgl · 1c05cf90
      Logan Gunthorpe authored 
      This is safer as it doesn't rely on the data being stored in
a single page in an sgl.

It also aids our effort to start phasing out users of sg_page. See [1].

For this we kmalloc some memory, copy to it and free at the end. Note:
we can't allocate this memory on the stack as the kbuild test robot
reports some frame size overflows on i386.

[1] https://lwn.net/Articles/720053/Signed-off-by: default avatarLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
      1c05cf90
    • Helen Koike's avatar
      nvme: improve performance for virtual NVMe devices · f9f38e33
      Helen Koike authored 
      This change provides a mechanism to reduce the number of MMIO doorbell
writes for the NVMe driver. When running in a virtualized environment
like QEMU, the cost of an MMIO is quite hefy here. The main idea for
the patch is provide the device two memory location locations:
 1) to store the doorbell values so they can be lookup without the doorbell
    MMIO write
 2) to store an event index.
I believe the doorbell value is obvious, the event index not so much.
Similar to the virtio specification, the virtual device can tell the
driver (guest OS) not to write MMIO unless you are writing past this
value.

FYI: doorbell values are written by the nvme driver (guest OS) and the
event index is written by the virtual device (host OS).

The patch implements a new admin command that will communicate where
these two memory locations reside. If the command fails, the nvme
driver will work as before without any optimizations.

Contributions:
  Eric Northup <digitaleric@google.com>
  Frank Swiderski <fes@google.com>
  Ted Tso <tytso@mit.edu>
  Keith Busch <keith.busch@intel.com>

Just to give an idea on the performance boost with the vendor
extension: Running fio [1], a stock NVMe driver I get about 200K read
IOPs with my vendor patch I get about 1000K read IOPs. This was
running with a null device i.e. the backing device simply returned
success on every read IO request.

[1] Running on a 4 core machine:
  fio --time_based --name=benchmark --runtime=30
  --filename=/dev/nvme0n1 --nrfiles=1 --ioengine=libaio --iodepth=32
  --direct=1 --invalidate=1 --verify=0 --verify_fatal=0 --numjobs=4
  --rw=randread --blocksize=4k --randrepeat=false
Signed-off-by: default avatarRob Nelson <rlnelson@google.com>
[mlin: port for upstream]
Signed-off-by: default avatarMing Lin <mlin@kernel.org>
[koike: updated for upstream]
Signed-off-by: default avatarHelen Koike <helen.koike@collabora.co.uk>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarKeith Busch <keith.busch@intel.com>
      f9f38e33
    • Keith Busch's avatar
      nvme/pci: Don't set reserved SQ create flags · 81c1cd98
      Keith Busch authored 
      The QPRIO field is only valid if weighted round robin arbitration is used,
and this driver doesn't enable that controller configuration option.
Signed-off-by: default avatarKeith Busch <keith.busch@intel.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarSagi Grimberg <sagi@grimberg.me>
      81c1cd98
    • Jens Axboe's avatar
      blk-stat: kill blk_stat_rq_ddir() · 99c749a4
      Jens Axboe authored 
      No point in providing and exporting this helper. There's just
one (real) user of it, just use rq_data_dir().
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      99c749a4
    • Josef Bacik's avatar
      nbd: set the max segments to USHRT_MAX · 1cc1f17a
      Josef Bacik authored 
      I lack the basic understanding of what segments mean, so we were being
limited to 512kib requests even with higher max_sectors sizes set.
Setting the maximum number of segments to unlimited allows us to
actually have arbitrarily large IO's go through NBD.
Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      1cc1f17a
  3. 20 Apr, 2017 23 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7