- 11 May, 2016 15 commits
-
-
Andrew Lunn authored
A switch can export an attached EEPROM using the standard ethtool API. However the switch itself cannot determine the size of the EEPROM, and multiple sizes are allowed. Thus a device tree property is supported to indicate the length of the EEPROM. Parse this property during device probe, and implement a callback function to retrieve it. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
The dsa_switch structure contains a dsa_chip_data member called pd. However in the rest of the code, pd is used for dsa_platform_data. This is confusing. Rename it cd, which is already often used in dsa.c and slave.c for this data type. Signed-off-by:
-
Andrew Lunn authored
The switch drivers only use the master_dev member for dev_info() messages. Now that the device is passed to the old style probe, and new style drivers are probed as true linux drivers, this is no longer needed. Signed-off-by:
-
Andrew Lunn authored
Resetting the switch is something the driver does, not the framework. So move the parsing of this property into the driver. There are no in kernel users of this property, so moving it does not break anything. There is however a board which will make use of this property making its way into the kernel. Signed-off-by:
-
Andrew Lunn authored
Allow Marvell switches to be mdio devices. Currently the driver just allocate the private structure and detects what device is on the bus. Later patches will make them register with the DSA framework. Signed-off-by:
-
Andrew Lunn authored
All other DSA drivers use _drv_ in there DSA probe function name, thus allowing for a true linux driver probe function to use the conventional name. Make mv88e6xxx fit this pattern. Signed-off-by:
-
Andrew Lunn authored
By initialising immediately it, we don't run the danger of using it before it is initialised. Signed-off-by:
-
Vivien Didelot authored
Some switch models have a STU (per VLAN port state database). Add a new capability flag to switches info, instead of checking their family. Also if the 6165 family has an STU, it must have a VTU, so add the MV88E6XXX_FLAG_VTU to its family flags. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
-
Vivien Didelot authored
Both VTU and STU operations use the same routine to access their (common) data registers, with a different offset. Add VTU and STU specific read and write functions to the data registers to abstract the required offset. Signed-off-by:
-
David S. Miller authored
David Ahern says: ==================== net: vrf: Fixup PKTINFO to return enslaved device index Applications such as OSPF and BFD need the original ingress device not the VRF device; the latter can be derived from the former. To that end move the packet intercept from an rx handler that is invoked by __netif_receive_skb_core to the ipv4 and ipv6 receive processing. IPv6 already saves the skb_iif to the control buffer in ipv6_rcv. Since the skb->dev has not been switched the cb has the enslaved device. Make the same happen for IPv4 by adding the skb_iif to inet_skb_parm and set it in ipv4 code after clearing the skb control buffer similar to IPv6. From there the pktinfo can just pull it from cb with the PKTINFO_SKB_CB cast. ==================== Signed-off-by: -
David Ahern authored
Applications such as OSPF and BFD need the original ingress device not the VRF device; the latter can be derived from the former. To that end add the skb_iif to inet_skb_parm and set it in ipv4 code after clearing the skb control buffer similar to IPv6. From there the pktinfo can just pull it from cb with the PKTINFO_SKB_CB cast. The previous patch moving the skb->dev change to L3 means nothing else is needed for IPv6; it just works. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David Ahern authored
Currently the VRF driver uses the rx_handler to switch the skb device to the VRF device. Switching the dev prior to the ip / ipv6 layer means the VRF driver has to duplicate IP/IPv6 processing which adds overhead and makes features such as retaining the ingress device index more complicated than necessary. This patch moves the hook to the L3 layer just after the first NF_HOOK for PRE_ROUTING. This location makes exposing the original ingress device trivial (next patch) and allows adding other NF_HOOKs to the VRF driver in the future. dev_queue_xmit_nit is exported so that the VRF driver can cycle the skb with the switched device through the packet taps to maintain current behavior (tcpdump can be used on either the vrf device or the enslaved devices). Signed-off-by:
-
Nicolas Dichtel authored
Protocol for 4in6 tunnel is IPPROTO_IPIP. This was wrongly changed by the last cleanup. CC: Tom Herbert <tom@herbertland.com> Fixes: 0d3c703a ("ipv6: Cleanup IPv6 tunnel receive path") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Lawrence Brakmo authored
Replace 2 arguments (cnt and rtt) in the congestion control modules' pkts_acked() function with a struct. This will allow adding more information without having to modify existing congestion control modules (tcp_nv in particular needs bytes in flight when packet was sent). As proposed by Neal Cardwell in his comments to the tcp_nv patch. Signed-off-by:
Lawrence Brakmo <brakmo@fb.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Antonio Quartulli says: ==================== Included changes: - remove useless skb size check in batadv_interface_rx - basic netns support introduced by Andrew Lunn: - prevent virtual interface from changing netns by setting NETIF_F_NETNS_LOCAL - create virtual interface within the netns of the first hard-interface - introduce detection of complex bridge loops and report event to the user (via udev) when the Bridge Loop Avoidance mechanism can't prevent them - minor reference counting bugfixes for the hard_iface object that couldn't make it via the net tree - use kref_get() instead of kref_get_unless_zero() to make reference counting bug more visible - use batadv_compare_eth() all over the code when possible instead of plain memcmp() - minor code cleanup and style adjustments ==================== Signed-off-by:
-
- 10 May, 2016 25 commits
-
-
Sowmini Varadhan authored
There are two instances of an unused variable, `doff' added by commit 6fa01ccd ("skbuff: Add pskb_extract() helper function") in pskb_carve_inside_header() and pskb_carve_inside_nonlinear(). Remove these instances, they are not used. Reported by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
Tom Herbert authored
The handler 'ila_fill_encap_info' adds two attributes: ILA_ATTR_LOCATOR and ILA_ATTR_CSUM_MODE. nla_total_size_64bit() must be use for ILA_ATTR_LOCATOR. Also, do nla_put_u8 instead of nla_put_u64 for ILA_ATTR_CSUM_MODE. Fixes: f13a82d8 ("ipv6: use nla_put_u64_64bit()") Fixes: 90bfe662 ("ila: add checksum neutral ILA translations") Reported-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
Pablo Neira authored
The GTPv1 header flags indicate the presence of optional extensions after this header. Refresh the pointer to the GTPv1 header as skb->head might have be reallocated via pskb_may_pull(). Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Nicolas Dichtel authored
The attribute 0 is never used in drbd, so let's use it as pad attribute in netlink messages. This minimizes the patch. Note that this patch is only compile-tested. Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
-
David S. Miller authored
Philippe Reynes says: ==================== net: phy: add phy_ethtool_{get|set}_link_ksettings Ethtool callbacks {get|set}_link_ksettings may be the same for many drivers. So we add two generics callbacks phy_ethtool_{get|set}_link_ksettings. To use those generics callbacks, the ethernet driver must use the pointer phydev contained in struct net_device, and not use a private structure to store this pointer. Changelog: v3: - rename function to phy_ethtool_{get|set}_link_ksettings - move code to net/phy/phy.c This feedback were provided by David Decotigny v2: - use generic function instead of macro - ethernet driver use the pointer phydev provided by struct net_device Those idea were provided by Ben Hutchings, and Florian Fainelli acknowledge them. ==================== Signed-off-by: -
Philippe Reynes authored
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by:Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
-
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
-
Philippe Reynes authored
Ethtool callbacks {get|set}_link_ksettings are often the same, so we add two generics functions phy_ethtool_{get|set}_link_ksettings to avoid writing severals times the same function. Signed-off-by:David Decotigny <decot@googlers.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-next-for-4.7-20160509' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2016-05-09 this is a pull request of 12 patches for net-next/master. Alexander Gerasiov and Nikita Edward Baruzdin each contribute a patch improving the sja1000 driver. Amitoj Kaur Chawla's patch converts the mcp251x driver to alloc_workqueue(). A patch by Oliver Hartkopp fixes the handling of CAN config options. Andreas Gröger improves the error handling in the janz-ican3 driver. The patch by Maximilian Schneider for the gs_usb improves probing of the USB driver. Finally there are 6 improvement patches by Marek Vasut for the ifi CAN driver. ==================== Signed-off-by:
-
Pablo Neira authored
This is an initial implementation of a netdev driver for GTP datapath (GTP-U) v0 and v1, according to the GSM TS 09.60 and 3GPP TS 29.060 standards. This tunneling protocol is used to prevent subscribers from accessing mobile carrier core network infrastructure. This implementation requires a GGSN userspace daemon that implements the signaling protocol (GTP-C), such as OpenGGSN [1]. This userspace daemon updates the PDP context database that represents active subscriber sessions through a genetlink interface. For more context on this tunneling protocol, you can check the slides that were presented during the NetDev 1.1 [2]. Only IPv4 is supported at this time. [1] http://git.osmocom.org/openggsn/ [2] http://www.netdevconf.org/1.1/proceedings/slides/schultz-welte-osmocom-gtp.pdfSigned-off-by:
-
Antonio Quartulli authored
When comparing Ethernet address it is better to use the more generic batadv_compare_eth. The latter is also optimised for architectures having a fast unaligned access. Signed-off-by:
Antonio Quartulli <a@unstable.cc> [sven@narfation.org: fix conflicts with current version] Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch>
-
Marek Lindner authored
Signed-off-by:
-
Sven Eckelmann authored
It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by:
Nicholas Krause <xerofoify@gmail.com> Signed-off-by:
-
Sven Eckelmann authored
_batadv_update_route requires that the caller already has a valid reference for neigh_node. It is therefore not possible that it has an reference counter of 0 and was still given to this function The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by:
-
Sven Eckelmann authored
The callers of the functions using batadv_hard_iface objects already make sure that they hold a valid reference. The subfunctions don't have to check whether the reference counter is > 0 because this was checked by the callers. The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by:
-
Sven Eckelmann authored
batadv_gw_node_add requires that the caller already has a valid reference for orig_node. It is therefore not possible that it has an reference counter of 0 and was still given to this function The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by:
-
Sven Eckelmann authored
batadv_gw_select requires that the caller already has a valid reference for new_gw_node. It is therefore not possible that it has an reference counter of 0 and was still given to this function The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by:
-
Sven Eckelmann authored
batadv_nc_get_nc_node requires that the caller already has a valid reference for orig_neigh_node. It is therefore not possible that it has an reference counter of 0 and was still given to this function The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by:
-
Sven Eckelmann authored
batadv_tvlv_container_get requires that tvlv.container_list_lock is held by the caller. It is therefore not possible that an item in tvlv.container_list has an reference counter of 0 and is still in the list The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by:
-
Sven Eckelmann authored
The hard_iface is referenced in the packet_type for batman-adv. Increase the refcounter of the hard_interface for it to have an explicit reference for it in case this functionality gets refactorted and the currently used implicit reference for it will be removed. Signed-off-by:
-
Sven Eckelmann authored
The receive function may start processing an incoming packet while the hard_iface is shut down in a different context. All called functions called with the batadv_hard_iface object belonging to the incoming interface would have to check whether the reference counter is still > 0. This is rather error-prone because this check can be forgotten easily. Instead check the reference counter when receiving the object to make sure that all called functions have a valid reference. Signed-off-by:
-
Sven Eckelmann authored
The batadv_hardif_list list is checked in many situations and the items in this list are given to specialized functions to modify the routing behavior. At the moment each of these called functions has to check itself whether the received batadv_hard_iface has a refcount > 0 before it can increase the reference counter and use it in other objects. This can easily lead to problems because it is not easily visible where all callers of a function got the batadv_hard_iface object from and whether they already hold a valid reference. Checking the reference counter directly before calling a subfunction with a pointer from the batadv_hardif_list avoids this problem. Signed-off-by:
-
Simon Wunderlich authored
There are network setups where the current bridge loop avoidance can't detect bridge loops. The minimal setup affected would consist of two LANs and two separate meshes, connected in a ring like that: A...(mesh1)...B | | (LAN1) (LAN2) | | C...(mesh2)...D Since both the meshes and backbones are separate, the bridge loop avoidance has not enough information to detect and avoid the loop in this case. Even if these scenarios can't be fixed easily, these kind of loops can be detected. This patch implements a periodic check (running every 60 seconds for now) which sends a broadcast frame with a random MAC address on each backbone VLAN. If a broadcast frame with the same MAC address is received shortly after on the mesh, we know that there must be a loop and report that incident as well as throw an uevent to let others handle that problem. Signed-off-by:
Simon Wunderlich <simon.wunderlich@open-mesh.com> [sven@narfation.org: fix conflicts with current version] Signed-off-by:
-
Andrew Lunn authored
When creating a soft interface, create it in the same netns as the hard interface. Replace all references to init_net with the correct name space for the interface being manipulated. Suggested-by:
Daniel Ehlers <danielehlers@mindeye.net> Signed-off-by:
-
Andrew Lunn authored
The batX soft interface should not be moved between network name spaces. This is similar to bridges, bonds, tunnels, which are not allowed to move between network namespaces. Suggested-by:
-
