- 09 Jul, 2013 38 commits
-
-
Wanpeng Li authored
The default zonelist order selecter will select "node" order if any nodes DMA zone comprises greater than 70% of its local memory instead of 60%, according to default_zonelist_order::low_kmem_size > total * 70/100. Signed-off-by:
Wanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Wanpeng Li authored
After commit 839a8e86 ("writeback: replace custom worker pool implementation with unbound workqueue"), there is no bdi forker thread any more. However, WB_REASON_FORKER_THREAD is still used due to it is TPs userland visible and we won't be exposing exactly the same information with just a different name. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Wanpeng Li authored
After commit 839a8e86 ("writeback: replace custom worker pool implementation with unbound workqueue"), bdi_writeback_workfn runs off bdi_writeback->dwork, on each execution, it processes bdi->work_list and reschedules if there are more things to do instead of flush any work that race with us existing. It is unecessary to check force_wait in wb_do_writeback since it is always 0 after the mentioned commit. This patch remove the force_wait in wb_do_writeback. Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Wanpeng Li authored
wb_reason_name is not used any more - remove it. Signed-off-by:
-
Haicheng Li authored
It's not used globally and could be static. Signed-off-by:
Haicheng Li <haicheng.li@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Zhang Yanfei authored
With CONFIG_MEMORY_HOTREMOVE unset, there is a compile warning: mm/sparse.c:755: warning: `clear_hwpoisoned_pages' defined but not used And Bisecting it ended up pointing to 4edd7cef ("mm, hotplug: avoid compiling memory hotremove functions when disabled"). This is because the commit above put sparse_remove_one_section() within the protection of CONFIG_MEMORY_HOTREMOVE but the only user of clear_hwpoisoned_pages() is sparse_remove_one_section(), and it is not within the protection of CONFIG_MEMORY_HOTREMOVE. So put clear_hwpoisoned_pages within CONFIG_MEMORY_HOTREMOVE should fix the warning. Signed-off-by:
Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Acked-by:
Toshi Kani <toshi.kani@hp.com> Signed-off-by:
-
Zhang Yanfei authored
This function is nowhere used, and it has a confusing name with put_page in mm/swap.c. So better to remove it. Signed-off-by:
-
Oleg Nesterov authored
vfree() only needs schedule_work(&p->wq) if p->list was empty, otherwise vfree_deferred->wq is already pending or it is running and didn't do llist_del_all() yet. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Zhang Yanfei authored
In __rmqueue_fallback(), current_order loops down from MAX_ORDER - 1 to the order passed. MAX_ORDER is typically 11 and pageblock_order is typically 9 on x86. Integer division truncates, so pageblock_order / 2 is 4. For the first eight iterations, it's guaranteed that current_order >= pageblock_order / 2 if it even gets that far! So just remove the unlikely(), it's completely bogus. Signed-off-by:
David Rientjes <rientjes@google.com> Acked-by:
-
Zhang Yanfei authored
These functions are nowhere used, so remove them. Signed-off-by:
-
Zhang Yanfei authored
The callers of build_zonelists_node always pass MAX_NR_ZONES -1 as the zone_type argument, so we can directly use the value in build_zonelists_node and remove zone_type argument. Signed-off-by:
-
Seth Jennings authored
Add maintainer information for zswap and zbud into the MAINTAINERS file. Signed-off-by:
Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by:
-
Zhang Yanfei authored
0xc just means MOVABLE + DMA32, which results in zone DMA32. Signed-off-by:
-
Glauber Costa authored
The memory we used to hold the memcg arrays is currently accounted to the current memcg. But that creates a problem, because that memory can only be freed after the last user is gone. Our only way to know which is the last user, is to hook up to freeing time, but the fact that we still have some in flight kmallocs will prevent freeing to happen. I believe therefore to be just easier to account this memory as global overhead. Signed-off-by:
Glauber Costa <glommer@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Glauber Costa authored
The memory we used to hold the memcg arrays is currently accounted to the current memcg. But that creates a problem, because that memory can only be freed after the last user is gone. Our only way to know which is the last user, is to hook up to freeing time, but the fact that we still have some in flight kmallocs will prevent freeing to happen. I believe therefore to be just easier to account this memory as global overhead. This patch (of 2): Disabling accounting is only relevant for some specific memcg internal allocations. Therefore we would initially not have such check at memcg_kmem_newpage_charge, since direct calls to the page allocator that are marked with GFP_KMEMCG only happen outside memcg core. We are mostly concerned with cache allocations and by having this test at memcg_kmem_get_cache we are already able to relay the allocation to the root cache and bypass the memcg caches altogether. There is one exception, though: the SLUB allocator does not create large order caches, but rather service large kmallocs directly from the page allocator. Therefore, the following sequence, when backed by the SLUB allocator: memcg_stop_kmem_account(); kmalloc(<large_number>) memcg_resume_kmem_account(); would effectively ignore the fact that we should skip accounting, since it will drive us directly to this function without passing through the cache selector memcg_kmem_get_cache. Such large allocations are extremely rare but can happen, for instance, for the cache arrays. This was never a problem in practice, because we weren't skipping accounting for the cache arrays. All the allocations we were skipping were fairly small. However, the fact that we were not skipping those allocations are a problem and can prevent the memcgs from going away. As we fix that, we need to make sure that the fix will also work with the SLUB allocator. Signed-off-by:
Michal Hocko <mhocko@suze.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Zhang Yanfei authored
We should check the VM_UNITIALIZED flag in s_show(). If this flag is set, that said, the vm_struct is not fully initialized. So it is unnecessary to try to show the information contained in vm_struct. We checked this flag in show_numa_info(), but I think it's better to check it earlier. Signed-off-by:
-
Zhang Yanfei authored
VM_UNLIST was used to indicate that the vm_struct is not listed in vmlist. But after commit 4341fa45 ("mm, vmalloc: remove list management of vmlist after initializing vmalloc"), the meaning of this flag changed. It now means the vm_struct is not fully initialized. So renaming it to VM_UNINITIALIZED seems more reasonable. Also change clear_vm_unlist to clear_vm_uninitialized_flag. Signed-off-by:
-
Zhang Yanfei authored
Use goto to jump to the fail label to give a failure message before returning NULL. This makes the failure handling in this function consistent. Signed-off-by:
-
Zhang Yanfei authored
As we have removed the dead code in the vb_alloc, it seems there is no place to use the alloc_map. So there is no reason to maintain the alloc_map in vmap_block. Signed-off-by:
-
Zhang Yanfei authored
This function is nowhere used now, so remove it. Signed-off-by:
-
Zhang Yanfei authored
Space in a vmap block that was once allocated is considered dirty and not made available for allocation again before the whole block is recycled. The result is that free space within a vmap block is always contiguous. So if a vmap block has enough free space for allocation, the allocation is impossible to fail. Thus, the fragmented block purging was never invoked from vb_alloc(). So remove this dead code. [ Same patches also sent by: Chanho Min <chanho.min@lge.com> Johannes Weiner <hannes@cmpxchg.org> but git doesn't do "multiple authors" ] Signed-off-by: -
Dan Carpenter authored
There is an extra semi-colon so the function always returns. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Zhang Yanfei authored
When calculating pages in a node, for each zone in that node, we will have zone_spanned_pages_in_node --> get_pfn_range_for_nid zone_absent_pages_in_node --> get_pfn_range_for_nid That is to say, we call the get_pfn_range_for_nid to get start_pfn and end_pfn of the node for MAX_NR_ZONES * 2 times. And this is totally unnecessary if we call the get_pfn_range_for_nid before zone_*_pages_in_node add two extra arguments node_start_pfn and node_end_pfn for zone_*_pages_in_node, then we can remove the get_pfn_range_in_node in zone_*_pages_in_node. [akpm@linux-foundation.org: make definitions more readable] Signed-off-by: -
Johannes Weiner authored
A few remaining architectures directly kill the page faulting task in an out of memory situation. This is usually not a good idea since that task might not even use a significant amount of memory and so may not be the optimal victim to resolve the situation. Since 2.6.29's 1c0fe6e3 ("mm: invoke oom-killer from page fault") there is a hook that architecture page fault handlers are supposed to call to invoke the OOM killer and let it pick the right task to kill. Convert the remaining architectures over to this hook. To have the previous behavior of simply taking out the faulting task the vm.oom_kill_allocating_task sysctl can be set to 1. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
-
Johannes Weiner authored
Remove struct mem_cgroup_lru_info and fold its single member, the variably sized nodeinfo[0], directly into struct mem_cgroup. This should make it more obvious why it has to be the last member there. Also move the comment that's above that special last member below it, so it is more visible to somebody that considers appending to the struct mem_cgroup. Signed-off-by:
-
Rasmus Villemoes authored
This patch is very similar to commit 84d96d89 ("mm: madvise: complete input validation before taking lock"): perform some basic validation of the input to mremap() before taking the ¤t->mm->mmap_sem lock. This also makes the MREMAP_FIXED => MREMAP_MAYMOVE dependency slightly more explicit. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
Libo Chen authored
Fix two obvious problems: 1. We have registered msm_iommu_driver first, and need unregister it when registered msm_iommu_ctx_driver fail 2. We don't need to kfree drvdata before kzalloc was successful. [akpm@linux-foundation.org: remove now-unneeded initialization of ctx_drvdata, remove unneeded braces] Signed-off-by:
Libo Chen <libo.chen@huawei.com> Acked-by:
David Brown <davidb@codeaurora.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
Lino Sanfilippo authored
There have been changes in the locking scheme of fsnotify but the comments in the source code have not been updated yet. This patch corrects this. Signed-off-by:
Lino Sanfilippo <LinoSanfilippo@gmx.de> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Lino Sanfilippo authored
In inotify_new_watch() the number of watches for a group is compared against the max number of allowed watches and increased afterwards. The check and incrementation is not done atomically, so it is possible for multiple concurrent threads to pass the check and increment the number of marks above the allowed max. This patch uses an inotify groups mark_lock to ensure that both check and incrementation are done atomic. Furthermore we dont have to worry about the race that allows a concurrent thread to add a watch just after inotify_update_existing_watch() returned with -ENOENT anymore, since this is also synchronized by the groups mark mutex now. Signed-off-by:
-
Lino Sanfilippo authored
There is no need to use a special mutex to protect against the fcntl/close race (see dnotify.c for a description of this race). Instead the dnotify_groups mark mutex can be used. Signed-off-by:
-
Lino Sanfilippo authored
The code under the groups mark_mutex in fanotify_add_inode_mark() and fanotify_add_vfsmount_mark() is almost identical. So put it into a seperate function. Signed-off-by:
-
Lino Sanfilippo authored
For both adding an event to an existing mark and destroying a mark we first have to find it via fsnotify_find_[inode|vfsmount]_mark(). But getting the mark and adding an event (or destroying it) is not done atomically. This opens a race where a thread is about to destroy a mark while another thread still finds the same mark and adds an event to its mask although it will be destroyed. Another race exists concerning the excess of a groups number of marks limit: When a mark is added the number of group marks is checked against the max number of marks per group and increased afterwards. Since check and increment is also not done atomically, this may result in 2 or more processes passing the check at the same time and increasing the number of group marks above the allowed limit. With this patch both races are avoided by doing the concerning operations with the groups mark mutex locked. Signed-off-by:
-
Dan Carpenter authored
The ->reserved field isn't cleared so we leak one byte of stack information to userspace. Signed-off-by:
-
Michal Simek authored
Use proper decimal type for comparison with u32. Compilation warning was introduced by 780a7654 ("audit: Make testing for a valid loginuid explicit.") kernel/auditfilter.c: In function 'audit_data_to_entry': kernel/auditfilter.c:426:3: warning: this decimal constant is unsigned only in ISO C90 [enabled by default] if ((f->type == AUDIT_LOGINUID) && (f->val == 4294967295)) { Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Chen Gang authored
If both 'tree' and 'watch' are valid we must call audit_put_tree(), just like the preceding code within audit_add_rule(). Signed-off-by:
Chen Gang <gang.chen@asianux.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Signed-off-by:
-
Raphael S. Carvalho authored
kernel/auditfilter.c:426: warning: this decimal constant is unsigned only in ISO C90 Signed-off-by:
Raphael S. Carvalho <raphael.scarv@gmail.com> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jeff Layton authored
The old audit PATH records for mq_open looked like this: type=PATH msg=audit(1366282323.982:869): item=1 name=(null) inode=6777 dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282323.982:869): item=0 name="test_mq" inode=26732 dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023 ...with the audit related changes that went into 3.7, they now look like this: type=PATH msg=audit(1366282236.776:3606): item=2 name=(null) inode=66655 dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282236.776:3606): item=1 name=(null) inode=6926 dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282236.776:3606): item=0 name="test_mq" Both of these look wrong to me. As Steve Grubb pointed out: "What we need is 1 PATH record that identifies the MQ. The other PATH records probably should not be there." Fix it to record the mq root as a parent, and flag it such that it should be hidden from view when the names are logged, since the root of the mq filesystem isn't terribly interesting. With this change, we get a single PATH record that looks more like this: type=PATH msg=audit(1368021604.836:484): item=0 name="test_mq" inode=16914 dev=00:0c mode=0100644 ouid=0 ogid=0 rdev=00:00 obj=unconfined_u:object_r:user_tmpfs_t:s0 In order to do this, a new audit_inode_parent_hidden() function is added. If we do it this way, then we avoid having the existing callers of audit_inode needing to do any sort of flag conversion if auditing is inactive. Signed-off-by:
Jeff Layton <jlayton@redhat.com> Reported-by:
Jiri Jaburek <jjaburek@redhat.com> Cc: Steve Grubb <sgrubb@redhat.com> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Olof Johansson authored
The recent "drivers/dma: remove unused support for MEMSET operations" change has fallout from lack of build testing by the author. This fixes: drivers/dma/iop-adma.c:1020:13: warning: unused variable 'dma_addr' [-Wunused-variable] drivers/dma/iop-adma.c:1519:2: warning: format '%s' expects a matching 'char *' argument [-Wformat=] Signed-off-by:
Olof Johansson <olof@lixom.net> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by:
-
- 07 Jul, 2013 2 commits
-
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave-dmaengine updates from Vinod Koul: "Once you have some time from extended weekend celebrations please consider pulling the following to get: - Various fixes and PCI driver for dw_dmac by Andy - DT binding for imx-dma by Markus & imx-sdma by Shawn - DT fixes for dmaengine by Lars - jz4740 dmac driver by Lars - and various fixes across the drivers" What "extended weekend celebrations"? I'm in the merge window, who has time for extended celebrations.. * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (40 commits) DMA: shdma: add DT support DMA: shdma: shdma_chan_filter() has to be in shdma-base.h DMA: shdma: (cosmetic) don't re-calculate a pointer dmaengine: at_hdmac: prepare clk before calling enable dmaengine/trivial: at_hdmac: add curly brackets to if/else expressions dmaengine: at_hdmac: remove unsuded atc_cleanup_descriptors() dmaengine: at_hdmac: add FIFO configuration parameter to DMA DT binding ARM: at91: dt: add header to define at_hdmac configuration MIPS: jz4740: Correct clock gate bit for DMA controller MIPS: jz4740: Remove custom DMA API MIPS: jz4740: Register jz4740 DMA device dma: Add a jz4740 dmaengine driver MIPS: jz4740: Acquire and enable DMA controller clock dma: mmp_tdma: disable irq when disabling dma channel dmaengine: PL08x: Avoid collisions with get_signal() macro dmaengine: dw: select DW_DMAC_BIG_ENDIAN_IO automagically dma: dw: add PCI part of the driver dma: dw: split driver to library part and platform code dma: move dw_dmac driver to an own directory dw_dmac: don't check resource with devm_ioremap_resource ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linuxLinus Torvalds authored
Pull first stage of __cpuinit removal from Paul Gortmaker: "The two commits here 1) dummy out all the __cpuinit macros so that we no longer generate such sections, and then 2) remove all the section processing that we used to do for those sections. This makes all the __cpuinit and friends no-ops, so that we can remove the use cases of it at our leisure. Expect stage 2, which does the tree wide removal sweep at the end of the merge window." * 'cpuinit-delete' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: modpost: remove all traces of cpuinit/cpuexit sections init.h: remove __cpuinit sections from the kernel
-
