- 12 Feb, 2016 40 commits
-
-
Mike Rapoport authored
Use stratight-forward defintion of PANEL_WINDOW_HEIGHT register fields and use open-coded implementation for register manipulations Signed-off-by:
Mike Rapoport <mike.rapoport@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Rapoport authored
Use stratight-forward defintion of PANEL_WINDOW_WIDTH register fields and use open-coded implementation for register manipulations Signed-off-by:
-
Mike Rapoport authored
Use stratight-forward defintion of PANEL_FB_WIDTH register fields and use open-coded implementation for register manipulations Signed-off-by:
-
Mike Rapoport authored
Use BIT() macro for single-bit fields of PANEL_FB_ADDRESS register and define PANEL_FB_ADDRESS_ADDRESS_MASK for masking the address bits. Signed-off-by:
-
Mike Rapoport authored
Use more straight-forward definitions for multi-bit fields of PANEL_DISPLAY_CTRL register and use open-coded implementation for register manipulation Signed-off-by:
-
Mike Rapoport authored
The PANEL_DISPLAY_CTRL_TFT_DISP definitions artificially encode PANEL_DISPLAY_CTRL_DUAL_DISPLAY and PANEL_DISPLAY_CTRL_DOUBLE_PIXEL bits combinations. Replace the PANEL_DISPLAY_CTRL_TFT_DISP usage with direct use of the bits defined in the datasheet. Signed-off-by:
-
Mike Rapoport authored
Replace complex definition of PANEL_DISPLAY_CTRL register fields with BIT() macro and use open-coded implementation for register manipulations. Signed-off-by:
-
Mike Rapoport authored
pr_debug would be enough Signed-off-by:
-
Mike Rapoport authored
The enable/disbable sequence in setDisplayControl function is duplicated for primary and secondary display controllers. The function can be refactored so that the common part of register access will be shared for both controllers. Signed-off-by:
-
Mike Rapoport authored
Use single mask for reserved bits in PANEL_DISPLAY_CTRL and CRT_DISPLAY_CTRL registers. Signed-off-by:
-
Mike Rapoport authored
The display control registers for primary and secondary display share some of the bits and those bits can be defined in a single place and then used for manipulations of the relevant registers. Signed-off-by:
-
Mike Rapoport authored
Remove HungarianCamelCase notation. Signed-off-by:
-
Mike Rapoport authored
Remove HungarianCamelCase notation. Signed-off-by:
-
Mike Rapoport authored
Use more straight-forward definitions for multi-bit field of VGA_CONFIGURATION register. Signed-off-by:
-
Mike Rapoport authored
Replace complex defintion of VGA_CONFIGURATION register fields with BIT() macro and use open-coded implementation for VGA_CONFIGURATION manipulations. Signed-off-by:
-
Mike Rapoport authored
The PLL_CTRL fields have common defines for several PLL control registers and re-defining the same values per register is not needed. Signed-off-by:
-
Mike Rapoport authored
Use more straight-forward definitions for multi-bit field of PANEL_PLL_CTRL register and use open-coded implementation for register manipulations. Signed-off-by:
-
Mike Rapoport authored
Replace complex defintion of PLL_CTRL fields with BIT() macro and use open-coded implementation for PLL register manipulations. Signed-off-by:
-
Mike Rapoport authored
Use PLL_CTRL_POWER definitions for CRT_PLL_CTRL register access Signed-off-by:
-
Mike Rapoport authored
Several PLL control registers have the same layout and therefore the field definitions may be shared for those registers. Renaming definitions of PANEL_PLL_CTRL_* fields to more generic PLL_CTRL_* will allow reusing these definitions for other PLL control registers. Signed-off-by:
-
Mike Rapoport authored
Fix comment alignment and formatting to follow kernel coding style Signed-off-by:
-
Mike Rapoport authored
Remove HungarianCamelCase notation Signed-off-by:
-
Hari Prasath Gujulan Elango authored
This patch makes use of wait_event_interruptible_timeout to achieve timeout functionality.This is a TODO mentiond in the comment which is also removed.It also aligns with what the function is supposed to do as in the comments. Signed-off-by:
Hari Prasath Gujulan Elango <hgujulan@visteon.com> Signed-off-by:
-
Janani Ravichandran authored
Aligning the constants in the macros improves code readability. Signed-off-by:
Janani Ravichandran <janani.rvchndrn@gmail.com> Signed-off-by:
-
Janani Ravichandran authored
Remove unneeded parentheses around the right hand side of assignments as they are not needed. Semantic patch: @@ expression a, b, c; @@ ( a = (b == c) | a = - ( b - ) ) Signed-off-by:
-
Bhumika Goyal authored
This patch removes unnecessary blank lines after { and before }. Found using checkpatch.pl. Signed-off-by:Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Bhumika Goyal authored
This patch removes unnecessary space after type casts. Found using checkpatch.pl. Signed-off-by:
-
Aybuke Ozdemir authored
Replace all instances of bit shifting on 1 with the BIT(x) macro. In addition, convert other non-1 shift operations with the equivalent BIT(x) macro for uniformity. Issue pointed out by checkpatch. CHECK: Prefer using the BIT macro Signed-off-by:
Aybuke Ozdemir <aybuke.147@gmail.com> Signed-off-by:
-
Janani Ravichandran authored
Use ARRAY_SIZE to calculate the size of an array to make code concise. The semantic patch used can be found here: https://github.com/coccinelle/coccinellery/commit/9cbab452a3a2e18439e8386d6c4a68ee42c3ee2bSigned-off-by:
-
Ian Abbott authored
The macros `SDF_MODE0`, `SDF_MODE1`, `SDF_MODE2`, `SDF_MODE3`, and `SDF_MODE4` are COMEDI subdevice flags originally associated with the obsolete (and no longer present) COMEDI "trigger" functionality. They have been of no use since COMEDI release 0.7.61 back in November 2001. Since they were going spare, a couple of them have been aliased as `SDF_PWM_COUNTER` and `SDF_PWM_HBRIDGE` to mean other things. Remove the obsolete macros and redefine `SDF_PWM_COUNTER` and `SDF_PWM_HBRIDGE` as equivalent numeric values. Some code distributed with the userspace COMEDILIB library uses the `SDF_MODE0` etc. flags to display the fact that they are set, but COMEDILIB uses and installs its own, compatible version of "comedi.h" anyway so isn't affected by their removal from the kernel copy. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
Remove `struct comedi_trig` and some associated macros, `TRIG_DITHER`, `TRIG_DEGLITCH`, `TRIG_CONFIG`, and ioctl code `COMEDI_TRIG`. These have been obsolete since COMEDI release 0.7.61 back in November 2001. The userspace COMEDILIB library still has some deprecated code that may attempt to use these, but it uses its own, compatible version of "comedi.h", so isn't affected by their removal from the kernel copy. Signed-off-by:
-
Ian Abbott authored
Add "kernel-doc"-formatted comments to the COMEDI `struct` declarations used with ioctls. Don't bother documenting `struct comedi_trig` as it is obsolete and not supported. Signed-off-by:
-
Ian Abbott authored
Add "kernel-doc"-formatted comments to COMEDI's general-purpose `enum` type declarations. Don't bother documenting the low-level driver-specific ones for now. Move the declaration of `enum comedi_counter_status_flags` next to the other general-purpose `enum` types. Signed-off-by:
-
Ian Abbott authored
The wording at the start of the header comment is a bit misleading, particularly the part in parentheses: "(installed as /usr/include/comedi.h)". This version of "comedi.h" certainly won't be installed as that pathname. Fix it. Signed-off-by:
-
Aaro Koskinen authored
Refactor RGMII 10 Mbps preamble error checking. The current implementation does not work correctly in phydev mode since only the link status changes trigger the callback, and if we stay on 10 Mbps operation the periodic checks for error counters are never done. Provide a periodic worker also during the phydev operation, and notify the link status changes through the phydev instead of the inband status change interrupt. This also has the benefit that we don't need to use legacy CVMX MDIO calls to check the PHY state, and we can avoid races that trigger bogus "Using 10Mbps with software preamble removal" logs when interfaces are being bringed up. It also avoids some corner-case crashes when the in-band interrupt triggers while the interface is being taken down. Tested on EdgeRouter Lite & D-Link DSR-1000N. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Janani Ravichandran authored
Remove parentheses around the right hand side of assignments as they are not needed. Semantic patch used: @@ expression a, b, c; @@ ( a = (b == c) | a = - ( b - ) ) Signed-off-by:
-
Janani Ravichandran authored
Add spaces around operators for better readability. Change suggested by checkpatch. Signed-off-by:
-
Sudip Mukherjee authored
We were returning ENOMEM on all types of errors. Lets return the actual error code. At the same time remove the label which became unused as a result of this patch. Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
Sudip Mukherjee authored
On error we were returning retval, but retval is not having the error value. We will get the error value using PTR_ERR. Signed-off-by:
-
Janani Ravichandran authored
Boolean variables should be assigned true/false rather than 1/0. This patch makes a correction on such a variable which has boolean values assigned in all other places within the file. Signed-off-by:
-
