- 25 Mar, 2023 2 commits
-
-
Rob Clark authored
Avoid allocating memory in job_run() by pre-allocating the hw_fence. Signed-off-by:
Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/527832/ Link: https://lore.kernel.org/r/20230320144356.803762-2-robdclark@gmail.com
-
Arnd Bergmann authored
Selecting CONFIG_PM_GENERIC_DOMAINS causes a build failure when CONFIG_PM is not enabled: WARNING: unmet direct dependencies detected for PM_GENERIC_DOMAINS Depends on [n]: PM [=n] Selected by [m]: - DRM_MSM [=m] && HAS_IOMEM [=y] && DRM [=m] && (ARCH_QCOM [=y] || SOC_IMX5 || COMPILE_TEST [=y]) && COMMON_CLK [=y] && IOMMU_SUPPORT [=y] && (QCOM_OCMEM [=y] || QCOM_OCMEM [=y]=n) && (QCOM_LLCC [=n] || QCOM_LLCC [=n]=n) && (QCOM_COMMAND_DB [=y] || QCOM_COMMAND_DB [=y]=n) && DEVFREQ_GOV_SIMPLE_ONDEMAND [=y] drivers/base/power/domain.c:654:13: error: use of undeclared identifier 'pm_wq' queue_work(pm_wq, &genpd->power_off_work); ^ drivers/base/power/domain.c:853:26: error: no member named 'ignore_children' in 'struct dev_pm_info' if (!dev || dev->power.ignore_children) ~~~~~~~~~~ ^ Fixes: c11fa120 ("drm/msm/a6xx: Use genpd notifier to ensure cx-gdsc collapse") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/528597/ Link: https://lore.kernel.org/r/20230324095502.3289094-1-arnd@kernel.orgSigned-off-by:
-
- 21 Mar, 2023 1 commit
-
-
Rob Clark authored
It's been a bit overdue. Regen headers to pull in a2xx perfcntr updates, etc. Signed-off-by:
-
- 20 Mar, 2023 14 commits
-
-
Rob Clark authored
The next generated header update will drop the _LO/_HI suffix, now that the userspace tooling properly understands 64b vs 32b regs (and the _LO/ _HI workarounds are getting cleaned up). So convert to using the 64b reg helpers in prep. Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/527923/ Link: https://lore.kernel.org/r/20230320185416.938842-1-robdclark@gmail.com
-
Adam Skladowski authored
Downstream driver appears to not support preemption on A510 target, trying to use one make device slow and fill log with rings related errors. Set num_rings to 1 to disable preemption. Suggested-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: e20c9284 ("drm/msm/adreno: Add support for Adreno 510 GPU") Signed-off-by:
Adam Skladowski <a39.skl@gmail.com> Reviewed-by:
-
Abhinav Kumar authored
Update the URI for MSM DRM bugs for users to be able to file bugs at a centralized location. Signed-off-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Acked-by:
Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/525026/ Link: https://lore.kernel.org/r/1677972416-7353-1-git-send-email-quic_abhinavk@quicinc.comSigned-off-by:
-
Johan Hovold authored
Clean up the component ops initialisers which were indented one level too far. Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/524973/ Link: https://lore.kernel.org/r/20230303164807.13124-5-johan+linaro@kernel.orgSigned-off-by:
-
Johan Hovold authored
The runtime PM status can only be updated while runtime PM is disabled. Drop the bogus pm_runtime_set_active() call that was made after enabling runtime PM and which (incidentally but correctly) left the runtime PM status set to 'suspended'. Fixes: 2c087a33 ("drm/msm/adreno: Load the firmware before bringing up the hardware") Signed-off-by:
-
Johan Hovold authored
A recent commit moved enabling of runtime PM to GPU load time (first open()) but failed to update the error paths so that runtime PM is disabled if initialisation of the GPU fails. This would trigger a warning about the unbalanced disable count on the next open() attempt. Note that pm_runtime_put_noidle() is sufficient to balance the usage count when pm_runtime_put_sync() fails (and is chosen over pm_runtime_resume_and_get() for consistency reasons). Fixes: 4b18299b ("drm/msm/adreno: Defer enabling runpm until hw_init()") Cc: stable@vger.kernel.org # 6.0 Signed-off-by:
-
Konrad Dybcio authored
Add the dev_pm_opp_of_find_icc_paths() call to let the OPP framework handle bus voting as part of power level setting. Reviewed-by:
-
Konrad Dybcio authored
Add support for gpu_busy on a4xx, which is required for devfreq support. Reviewed-by:
-
Konrad Dybcio authored
Add support for gpu_busy on a3xx, which is required for devfreq support. Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #ifc6410 Reviewed-by:
-
Konrad Dybcio authored
Some older GPUs (namely a2xx with no opp tables at all and a320 with downstream-remnants gpu pwrlevels) used not to have OPP tables. They both however had just one frequency defined, making it extremely easy to construct such an OPP table from within the driver if need be. Do so and switch all clk_set_rate calls on core_clk to their OPP counterparts. Reviewed-by:
-
Akhil P Oommen authored
As per the recommended recovery sequence of adreno gpu, cx gdsc should collapse at hardware before it is turned back ON. This helps to clear out the stale states in hardware before it is reinitialized. Use the genpd notifier along with the newly introduced dev_pm_genpd_synced_poweroff() api to ensure that cx gdsc has collapsed before we turn it back ON. Signed-off-by:
Akhil P Oommen <quic_akhilpo@quicinc.com> Reviewed-by:
-
Akhil P Oommen authored
Remove the unused 'reset' interface which was supposed to help to ensure that cx gdsc has collapsed during gpu recovery. This is was not enabled so far due to missing gpucc driver support. Similar functionality using genpd framework will be implemented in the upcoming patch. This effectively reverts commit 1f6cca40 ("drm/msm/a6xx: Ensure CX collapse during gpu recovery"). Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Patchwork: https://patchwork.freedesktop.org/patch/516470/ Link: https://lore.kernel.org/r/20230102161757.v5.4.I96e0bf9eaf96dd866111c1eec8a4c9b70fd7cbcb@changeidSigned-off-by:
-
Akhil P Oommen authored
When a device has multiple power domains, dev->power_domain is left empty during probe. That didn't cause any issue so far because we are freeloading on smmu driver's vote on cx gdsc. Instead of that, create a device_link between cx genpd device and gmu device to keep a vote from gpu driver. Before this patch: localhost ~ # cat /sys/kernel/debug/pm_genpd/pm_genpd_summary gx_gdsc on 0 /devices/genpd:1:3d6a000.gmu active 0 cx_gdsc on 0 /devices/platform/soc@0/3da0000.iommu active 0 After this patch: localhost ~ # cat /sys/kernel/debug/pm_genpd/pm_genpd_summary gx_gdsc on 0 /devices/genpd:1:3d6a000.gmu active 0 cx_gdsc on 0 /devices/platform/soc@0/3da0000.iommu active 0 /devices/genpd:0:3d6a000.gmu active 0 Signed-off-by: -
Rob Clark authored
Merge drm-next into msm-next to pick up external clk and PM dependencies for improved a6xx GPU reset sequence. Signed-off-by:
-
- 15 Mar, 2023 1 commit
-
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Cross-subsystem Changes: - MEI patches to fix suspend/resume issues with the i915's PXP. (Alexander) Driver Changes: - Registers helpers and clean-ups. (Lucas) - PXP fixes and clean-ups. (Alan, Alexander) - CDCLK related fixes and w/a (Chaitanya, Stanislav) - Move display code to use RMW whenever possible (Andrzej) - PSR fixes (Jouni, Ville) - Implement async_flip mode per plane tracking (Andrzej) - Remove pre-production Workarounds (Matt) - HDMI related fixes (Ankit) - LVDS cleanup (Ville) - Watermark fixes and cleanups (Ville, Jani, Stanilav) - DMC code related fixes, cleanups and improvements (Jani) - Implement fb_dirty for PSR,FBC,DRRS fixes (Jouni) - Initial DSB improvements targeting LUTs loading (Ville) - HWMON related fixes (Ashutosh) - PCI ID updates (Jonathan, Matt Roper) - Fix leak in scatterlist (Matt Atwood) - Fix eDP+DSI dual panel systems (Ville) - Cast iomem to avoid sparese warnings (Jani) - Set default backlight controller index (Jani) - More MTL enabling (RK) - Conversion of display dev_priv towards i915 (Nirmoy) - Improvements in log/debug messages (Ville) - Increase slice_height for DP VDSC (Suraj) - VBT ports improvements (Ville) - Fix platforms without Display (Imre) - Other generic display code clean-ups (Ville, Jani, Rodrigo) - Add RPL-U sub platform (Chaitanya) - Add inverted backlight quirk for HP 14-r206nv (Mavroudis) - Transcoder timing improvements (Ville) - Track audio state per-transcoder (Ville) - Error/underrun interrupt fixes (Ville) - Update combo PHY init sequence (Matt Roper) - Get HDR DPCD refresh timeout (Ville) - Vblank improvements (Ville) - DSS fixes and cleanups (Jani) - PM code cleanup (Jani) - Split display parts related to RPS (Jani) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZAez4aekcob8fTeh@intel.com
-
- 14 Mar, 2023 1 commit
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v6.4-rc1: Note: Only changes since pull request from 2023-02-23 are included here. UAPI Changes: - Convert rockchip bindings to YAML. - Constify kobj_type structure in dma-buf. - FBDEV cmdline parser fixes, and other small fbdev fixes for mode parsing. Cross-subsystem Changes: - Add Neil Armstrong as linaro maintainer. - Actually signal the private stub dma-fence. Core Changes: - Add function for adding syncobj dep to sched_job and use it in panfrost, v3d. - Improve DisplayID 2.0 topology parsing and EDID parsing in general. - Add a gem eviction function and callback for generic GEM shrinker purposes. - Prepare to convert shmem helper to use the GEM reservation lock instead of own locking. (Actual commit itself got reverted for now) - Move the suballocator from radeon and amdgpu drivers to core in preparation for Xe. - Assorted small fixes and documentation. - Fixes to HPD polling. - Assorted small fixes in simpledrm, bridge, accel, shmem-helper, and the selftest of format-helper. - Remove dummy resource when ttm bo is created, and during pipelined gutting. Fix all drivers to accept a NULL ttm_bo->resource. - Handle pinned BO moving prevention in ttm core. - Set drm panel-bridge orientation before connector is registered. - Remove dumb_destroy callback. - Add documentation to GEM_CLOSE, PRIME_HANDLE_TO_FD, PRIME_FD_TO_HANDLE, GETFB2 ioctl's. - Add atomic enable_plane callback, use it in ast, mgag200, tidss. Driver Changes: - Use drm_gem_objects_lookup in vc4. - Assorted small fixes to virtio, ast, bridge/tc358762, meson, nouveau. - Allow virtio KMS to be disabled and compiled out. - Add Radxa 8/10HD, Samsung AMS495QA01 panels. - Fix ivpu compiler errors. - Assorted fixes to drm/panel, malidp, rockchip, ivpu, amdgpu, vgem, nouveau, vc4. - Assorted cleanups, simplifications and fixes to vmwgfx. Signed-off-by:
-
- 13 Mar, 2023 14 commits
-
-
Vinod Polimera authored
For the PSR to kick in, self_refresh_aware has to be set. Initialize it based on the PSR support for the eDP interface. Signed-off-by:
Vinod Polimera <quic_vpolimer@quicinc.com> Reviewed-by:
-
Vinod Polimera authored
Populate the enocder software structure to reflect the updated crtc appropriately during crtc enable/disable for a new commit while taking care of the self refresh transitions when crtc disable is triggered from the drm self refresh library. Signed-off-by:
-
Vinod Polimera authored
Enable PSR on eDP interface using drm self-refresh librabry. This patch uses a trigger from self-refresh library to enter/exit into PSR, when there are no updates from framework. Signed-off-by:
Kalyan Thota <quic_kalyant@quicinc.com> Signed-off-by:
-
Vinod Polimera authored
Use atomic variants for encoder callback functions such that certain states like self-refresh can be accessed as part of enable/disable sequence. Signed-off-by:
-
Vinod Polimera authored
The eDP and DP interfaces shared the bridge operations and the eDP specific changes were implemented under is_edp check. To add psr support for eDP, we started using a new set of eDP bridge ops. We are moving the eDP specific code in the dp_bridge_mode_valid function to a new eDP function, edp_bridge_mode_valid under the eDP bridge ops. Signed-off-by:
Sankeerth Billakanti <quic_sbillaka@quicinc.com> Signed-off-by:
-
Vinod Polimera authored
Add support for basic panel self refresh (PSR) feature for eDP. Add a new interface to set PSR state in the sink from DPU. Program the eDP controller to issue PSR enter and exit SDP to the sink. Signed-off-by:
-
Vinod Polimera authored
Use atomic variants for DP bridge callback functions so that the atomic state can be accessed in the interface drivers. The atomic state will help the driver find out if the display is in self refresh state. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/524731/ Link: https://lore.kernel.org/r/1677774797-31063-9-git-send-email-quic_vpolimer@quicinc.comSigned-off-by:
-
Vinod Polimera authored
Reset the datapath after disabling the timing gen, such that it can start on a clean slate when the intf is enabled back. This was a recommended sequence from the DPU HW programming guide. Signed-off-by:
-
Vinod Polimera authored
There can be a race between timing gen disable and vblank irq. The wait post timing gen disable may return early but intf disable sequence might not be completed. Ensure that, intf status is disabled before we retire the function. Signed-off-by:
-
Vinod Polimera authored
Recommended way of reading the interface timing gen status is via status register. Timing gen status register will give a reliable status of the interface especially during ON/OFF transitions. This support was added from DPU version 5.0.0. Signed-off-by:
-
Vinod Polimera authored
According to KMS documentation, The driver must not release any shared resources if active is set to false but enable still true. Fixes: ccc862b9 ("drm/msm/dpu: Fix reservation failures in modeset") Signed-off-by:
-
Vinod Polimera authored
This change will handle the psr entry exit cases in the panel bridge atomic callback functions. For example, the panel power should not turn off if the panel is entering psr. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Patchwork: https://patchwork.freedesktop.org/patch/524721/ Link: https://lore.kernel.org/r/1677774797-31063-4-git-send-email-quic_vpolimer@quicinc.comSigned-off-by:
-
Vinod Polimera authored
Use atomic variants for panel bridge callback functions such that certain states like self-refresh can be accessed as part of enable/disable sequence. Signed-off-by:
-
Vinod Polimera authored
Add new helper functions, drm_atomic_get_old_crtc_for_encoder and drm_atomic_get_new_crtc_for_encoder to retrieve the corresponding crtc for the encoder. Signed-off-by:
-
- 12 Mar, 2023 7 commits
-
-
Linus Torvalds authored
-
Hector Martin authored
This reverts part of commit 015b8cc5 ("wifi: cfg80211: Fix use after free for wext") This commit broke WPA offload by unconditionally clearing the crypto modes for non-WEP connections. Drop that part of the patch. Signed-off-by:
Hector Martin <marcan@marcan.st> Reported-by:
Ilya <me@0upti.me> Reported-and-tested-by:
Janne Grunau <j@jannau.net> Reviewed-by:
Eric Curtin <ecurtin@redhat.com> Fixes: 015b8cc5 ("wifi: cfg80211: Fix use after free for wext") Cc: stable@kernel.org Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edfSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmddLinus Torvalds authored
Pull tpm fixes from Jarkko Sakkinen: "Two additional bug fixes for v6.3" * tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm: disable hwrng for fTPM on some AMD designs tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
-
Mario Limonciello authored
AMD has issued an advisory indicating that having fTPM enabled in BIOS can cause "stuttering" in the OS. This issue has been fixed in newer versions of the fTPM firmware, but it's up to system designers to decide whether to distribute it. This issue has existed for a while, but is more prevalent starting with kernel 6.1 because commit b006c439 ("hwrng: core - start hwrng kthread also for untrusted sources") started to use the fTPM for hwrng by default. However, all uses of /dev/hwrng result in unacceptable stuttering. So, simply disable registration of the defective hwrng when detecting these faulty fTPM versions. As this is caused by faulty firmware, it is plausible that such a problem could also be reproduced by other TPM interactions, but this hasn't been shown by any user's testing or reports. It is hypothesized to be triggered more frequently by the use of the RNG because userspace software will fetch random numbers regularly. Intentionally continue to register other TPM functionality so that users that rely upon PCR measurements or any storage of data will still have access to it. If it's found later that another TPM functionality is exacerbating this problem a module parameter it can be turned off entirely and a module parameter can be introduced to allow users who rely upon fTPM functionality to turn it on even though this problem is present. Link: https://www.amd.com/en/support/kb/faq/pa-410 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989 Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/ Fixes: b006c439 ("hwrng: core - start hwrng kthread also for untrusted sources") Cc: stable@vger.kernel.org Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Tested-by: reach622@mailcuk.com Tested-by:
Bell <1138267643@qq.com> Co-developed-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by:
-
Morten Linderud authored
tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI table is found. If the firmware vendor includes an invalid log address we are unable to map from the ACPI memory and tpm_read_log() returns -EIO which would abort discovery of the eventlog. Change the return value from -EIO to -ENODEV when acpi_os_map_iomem() fails to map the event log. The following hardware was used to test this issue: Framework Laptop (Pre-production) BIOS: INSYDE Corp, Revision: 3.2 TPM Device: NTC, Firmware Revision: 7.2 Dump of the faulty ACPI TPM2 table: [000h 0000 4] Signature : "TPM2" [Trusted Platform Module hardware interface Table] [004h 0004 4] Table Length : 0000004C [008h 0008 1] Revision : 04 [009h 0009 1] Checksum : 2B [00Ah 0010 6] Oem ID : "INSYDE" [010h 0016 8] Oem Table ID : "TGL-ULT" [018h 0024 4] Oem Revision : 00000002 [01Ch 0028 4] Asl Compiler ID : "ACPI" [020h 0032 4] Asl Compiler Revision : 00040000 [024h 0036 2] Platform Class : 0000 [026h 0038 2] Reserved : 0000 [028h 0040 8] Control Address : 0000000000000000 [030h 0048 4] Start Method : 06 [Memory Mapped I/O] [034h 0052 12] Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00 [040h 0064 4] Minimum Log Length : 00010000 [044h 0068 8] Log Address : 000000004053D000 Fixes: 0cf577a0 ("tpm: Fix handling of missing event log") Tested-by:Erkki Eilonen <erkki@bearmetal.eu> Signed-off-by:
Morten Linderud <morten@linderud.pw> Reviewed-by:
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: - Fix a crash if mount time quotacheck fails when there are inodes queued for garbage collection. - Fix an off by one error when discarding folios after writeback failure. * tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix off-by-one-block in xfs_discard_folio() xfs: quotacheck failure can race with background inode inactivation
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes and removal from Greg KH: "Here are four small staging driver fixes, and one big staging driver deletion for 6.3-rc2. The fixes are: - rtl8192e driver fixes for where the driver was attempting to execute various programs directly from the disk for unknown reasons - rtl8723bs driver fixes for issues found by Hans in testing The deleted driver is the removal of the r8188eu wireless driver as now in 6.3-rc1 we have a "real" wifi driver for one that includes support for many many more devices than this old driver did. So it's time to remove it as it is no longer needed. The maintainers of this driver all have acked its removal. Many thanks to them over the years for working to clean it up and keep it working while the real driver was being developed. All of these have been in linux-next this week with no reported problems" * tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8188eu: delete driver staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss() staging: rtl8723bs: Fix key-store index handling staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script
-
