- 15 Sep, 2017 14 commits
-
-
Johan Hovold authored
commit dd5ca753 upstream. Drop erroneous le16_to_cpu when returning the USB device speed which is already in host byte order. Found using sparse: warning: cast to restricted __le16 Fixes: 946b960d ("USB: add driver for iowarrior devices.") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Johan Hovold authored
commit 41318a2b upstream. Add missing endianness conversion when using the USB device-descriptor idProduct field to apply a hardware quirk. Fixes: 1ba47da5 ("uwb: add the i1480 DFU driver") Signed-off-by:
-
Vamsi Krishna Samavedam authored
commit 2f964780 upstream. Format specifier %p can leak kernel addresses while not valuing the kptr_restrict system settings. When kptr_restrict is set to (1), kernel pointers printed using the %pK format specifier will be replaced with Zeros. Debugging Note : &pK prints only Zeros as address. If you need actual address information, write 0 to kptr_restrict. echo 0 > /proc/sys/kernel/kptr_restrict [Found by poking around in a random vendor kernel tree, it would be nice if someone would actually send these types of patches upstream - gkh] Signed-off-by:
Vamsi Krishna Samavedam <vskrishn@codeaurora.org> Signed-off-by:
-
Alan Stern authored
commit 628c2893 upstream. The ene_usb6250 sub-driver in usb-storage does USB I/O to buffers on the stack, which doesn't work with vmapped stacks. This patch fixes the problem by allocating a separate 512-byte buffer at probe time and using it for all of the offending I/O operations. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by:
-
Soheil Hassas Yeganeh authored
commit bafbb9c7 upstream. tcp_ack() can call tcp_fragment() which may dededuct the value tp->fackets_out when MSS changes. When prior_fackets is larger than tp->fackets_out, tcp_clean_rtx_queue() can invoke tcp_update_reordering() with negative values. This results in absurd tp->reodering values higher than sysctl_tcp_max_reordering. Note that tcp_update_reordering indeeds sets tp->reordering to min(sysctl_tcp_max_reordering, metric), but because the comparison is signed, a negative metric always wins. Fixes: c7caf8d3 ("[TCP]: Fix reord detection due to snd_una covered holes") Reported-by:
Rebecca Isaacs <risaacs@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sui Chen authored
commit 8bfd1743 upstream. (Correction in this resend: fixed function name acer_sa5_271_workaround; fixed the always-true condition in the function; fixed description.) On the Acer Switch Alpha 12 (model number: SA5-271), the internal SSD may not get detected because the port_map and CAP.nr_ports combination causes the driver to skip the port that is actually connected to the SSD. More specifically, either all SATA ports are identified as DUMMY, or all ports get ``link down'' and never get up again. This problem occurs occasionally. When this problem occurs, CAP may hold a value of 0xC734FF00 or 0xC734FF01 and port_map may hold a value of 0x00 or 0x01. When this problem does not occur, CAP holds a value of 0xC734FF02 and port_map may hold a value of 0x07. Overriding the CAP value to 0xC734FF02 and port_map to 0x7 significantly reduces the occurrence of this problem. Link: https://bugzilla.kernel.org/attachment.cgi?id=253091Signed-off-by:
Sui Chen <suichen6@gmail.com> Tested-by:
Damian Ivanov <damianatorrpm@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Johan Hovold authored
commit 6aeb75e6 upstream. Fix a division-by-zero in set_termios when debugging is enabled and a high-enough speed has been requested so that the divisor value becomes zero. Instead of just fixing the offending debug statement, cap the baud rate at the base as a zero divisor value also appears to crash the firmware. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
Johan Hovold authored
commit 26cede34 upstream. Drop erroneous cpu_to_le32 when setting the baud rate, something which corrupted the divisor on big-endian hosts. Found using sparse: warning: incorrect type in argument 1 (different base types) expected unsigned int [unsigned] [usertype] val got restricted __le32 [usertype] <noident> Fixes: af2ac1a0 ("USB: serial mct_usb232: move DMA buffers to heap") Reviewed-by:
Pete Zaitcev <zaitcev@yahoo.com> Signed-off-by:
-
Johan Hovold authored
commit ad0ccac7 upstream. Add missing endianness conversion when printing the supported baud rates. Found using sparse: warning: restricted __le16 degrades to integer Fixes: e0d795e4 ("usb: irda: cleanup on ir-usb module") Reviewed-by:
-
Anthony Mallet authored
commit bb246681 upstream. Commit 557aaa7f ("ft232: support the ASYNC_LOW_LATENCY flag") enables unprivileged users to set the FTDI latency timer, but there was a logic flaw that skipped sending the corresponding USB control message to the device. Specifically, the device latency timer would not be updated until next open, something which was later also inadvertently broken by commit c19db4c9 ("USB: ftdi_sio: set device latency timeout at port probe"). A recent commit c6dce262 ("USB: serial: ftdi_sio: fix extreme low-latency setting") disabled the low-latency mode by default so we now need this fix to allow unprivileged users to again enable it. Signed-off-by:
Anthony Mallet <anthony.mallet@laas.fr> [johan: amend commit message] Fixes: 557aaa7f ("ft232: support the ASYNC_LOW_LATENCY flag") Fixes: c19db4c9 ("USB: ftdi_sio: set device latency timeout at port probe"). Signed-off-by:
-
Johan Hovold authored
commit 75cf0679 upstream. Add missing endianness conversion when using the USB device-descriptor bcdDevice field to construct a firmware file name. Fixes: 8ef80aef ("[IRDA]: irda-usb.c: STIR421x cleanups") Cc: Nick Fedchik <nfedchik@atlantic-link.com.ua> Signed-off-by:
-
Yuchung Cheng authored
commit b451e5d2 upstream. This patch fixes a bug in splitting an SKB during SACK processing. Specifically if an skb contains multiple packets and is only partially sacked in the higher sequences, tcp_match_sack_to_skb() splits the skb and marks the second fragment as SACKed. The current code further attempts rounding up the first fragment to MSS boundaries. But it misses a boundary condition when the rounded-up fragment size (pkt_len) is exactly skb size. Spliting such an skb is pointless and causses a kernel warning and aborts the SACK processing. This patch universally checks such over-split before calling tcp_fragment to prevent these unnecessary warnings. Fixes: adb92db8 ("tcp: Make SACK code to split only at mss boundaries") Signed-off-by:
-
Steffen Klassert authored
commit d90c9024 upstream. The sadb_x_sec_len is stored in the unit 'byte divided by eight'. So we have to multiply this value by eight before we can do size checks. Otherwise we may get a slab-out-of-bounds when we memcpy the user sec_ctx. Fixes: df71837d ("[LSM-IPSec]: Security association restriction.") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Sabrina Dubroca authored
commit 9b3eb541 upstream. When CONFIG_XFRM_SUB_POLICY=y, xfrm_dst stores a copy of the flowi for that dst. Unfortunately, the code that allocates and fills this copy doesn't care about what type of flowi (flowi, flowi4, flowi6) gets passed. In multiple code paths (from raw_sendmsg, from TCP when replying to a FIN, in vxlan, geneve, and gre), the flowi that gets passed to xfrm is actually an on-stack flowi4, so we end up reading stuff from the stack past the end of the flowi4 struct. Since xfrm_dst->origin isn't used anywhere following commit ca116922 ("xfrm: Eliminate "fl" and "pol" args to xfrm_bundle_ok()."), just get rid of it. xfrm_dst->partner isn't used either, so get rid of that too. Fixes: 9d6ec938 ("ipv4: Use flowi4 in public route lookup interfaces.") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
- 26 Aug, 2017 26 commits
-
-
Ben Hutchings authored
-
Willem de Bruijn authored
commit c27927e3 upstream. Updates to tp_reserve can race with reads of the field in packet_set_ring. Avoid this by holding the socket lock during updates in setsockopt PACKET_RESERVE. This bug was discovered by syzkaller. Fixes: 8913336a ("packet: add PACKET_RESERVE sockopt") Reported-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Cong Wang authored
commit f991af3d upstream. The retry logic for netlink_attachskb() inside sys_mq_notify() is nasty and vulnerable: 1) The sock refcnt is already released when retry is needed 2) The fd is controllable by user-space because we already release the file refcnt so we when retry but the fd has been just closed by user-space during this small window, we end up calling netlink_detachskb() on the error path which releases the sock again, later when the user-space closes this socket a use-after-free could be triggered. Setting 'sock' to NULL here should be sufficient to fix it. Reported-by:
GeneBlue <geneblue.mail@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: stable@kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Thomas Gleixner authored
commit 1e38da30 upstream. The handling of the might_cancel queueing is not properly protected, so parallel operations on the file descriptor can race with each other and lead to list corruptions or use after free. Protect the context for these operations with a seperate lock. The wait queue lock cannot be reused for this because that would create a lock inversion scenario vs. the cancel lock. Replacing might_cancel with an atomic (atomic_t or atomic bit) does not help either because it still can race vs. the actual list operation. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: "linux-fsdevel@vger.kernel.org" Cc: syzkaller <syzkaller@googlegroups.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1701311521430.3457@nanosSigned-off-by:
-
Sabrina Dubroca authored
commit 6399f1fa upstream. In some cases, offset can overflow and can cause an infinite loop in ip6_find_1stfragopt(). Make it unsigned int to prevent the overflow, and cap it at IPV6_MAXPLEN, since packets larger than that should be invalid. This problem has been here since before the beginning of git history. Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Laura Abbott authored
commit 861ce4a3 upstream. '__vmalloc_start_set' currently only gets set in initmem_init() when !CONFIG_NEED_MULTIPLE_NODES. This breaks detection of vmalloc address with virt_addr_valid() with CONFIG_NEED_MULTIPLE_NODES=y, causing a kernel crash: [mm/usercopy] 517e1fbe: kernel BUG at arch/x86/mm/physaddr.c:78! Set '__vmalloc_start_set' appropriately for that case as well. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Laura Abbott <labbott@redhat.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: dc16ecf7 ("x86-32: use specific __vmalloc_start_set flag in __virt_addr_valid") Link: http://lkml.kernel.org/r/1494278596-30373-1-git-send-email-labbott@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit 34bf129a upstream. While working on another build error, I ran into several variations of this dependency loop: subsection "Kconfig recursive dependency limitations" drivers/input/Kconfig:8: symbol INPUT is selected by VT For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/tty/Kconfig:12: symbol VT is selected by FB_STI For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/video/fbdev/Kconfig:677: symbol FB_STI depends on FB For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/video/fbdev/Kconfig:5: symbol FB is selected by DRM_KMS_FB_HELPER For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/gpu/drm/Kconfig:72: symbol DRM_KMS_FB_HELPER is selected by DRM_KMS_CMA_HELPER For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/gpu/drm/Kconfig:137: symbol DRM_KMS_CMA_HELPER is selected by DRM_HDLCD For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/gpu/drm/arm/Kconfig:6: symbol DRM_HDLCD depends on OF For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/of/Kconfig:4: symbol OF is selected by X86_INTEL_CE For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" arch/x86/Kconfig:523: symbol X86_INTEL_CE depends on X86_IO_APIC For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" arch/x86/Kconfig:1011: symbol X86_IO_APIC depends on X86_LOCAL_APIC For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" arch/x86/Kconfig:1005: symbol X86_LOCAL_APIC depends on X86_UP_APIC For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" arch/x86/Kconfig:980: symbol X86_UP_APIC depends on PCI_MSI For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/pci/Kconfig:11: symbol PCI_MSI is selected by AMD_IOMMU For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/iommu/Kconfig:106: symbol AMD_IOMMU depends on IOMMU_SUPPORT For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/iommu/Kconfig:5: symbol IOMMU_SUPPORT is selected by DRM_ETNAVIV For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/gpu/drm/etnaviv/Kconfig:2: symbol DRM_ETNAVIV depends on THERMAL For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/thermal/Kconfig:5: symbol THERMAL is selected by ACPI_VIDEO For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/acpi/Kconfig:183: symbol ACPI_VIDEO is selected by INPUT This doesn't currently show up as I fixed the 'THERMAL' part of it, but I noticed that the FB_STI dependency should not be there but was introduced by slightly incorrect bug-fix patch that tried to fix a link error. Instead of selecting 'VT' to make us enter the drivers/video/console directory at compile-time, it's sufficient to build the drivers/video/console/sticore.c file by adding its directory to when CONFIG_FB_STI is enabled. Alternatively, we could move the sticore code to another directory that is always built when we have at STI_CONSOLE or FB_STI enabled. Fixes: 17085a93 ("parisc: stifb: should depend on STI_CONSOLE") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by:
-
Richard Weinberger authored
commit 9abc74a2 upstream. This is broken since ever but sadly nobody noticed. Recent versions of GDB set DR_CONTROL unconditionally and UML dies due to a heap corruption. It turns out that the PTRACE_POKEUSER was copy&pasted from i386 and assumes that addresses are 4 bytes long. Fix that by using 8 as address size in the calculation. Reported-by:
jie cao <cj3054@gmail.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Steve French authored
commit 26c9cb66 upstream. Mac requires the unicode flag to be set for cifs, even for the smb echo request (which doesn't have strings). Without this Mac rejects the periodic echo requests (when mounting with cifs) that we use to check if server is down Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit 564277ec upstream. January is month 1. There is no zero-th month. If someone passes a zero month then it means we read from one space before the start of the total_days_of_prev_months[] array. We may as well also be strict about days as well. Fixes: 1bd5bbcb ("[CIFS] Legacy time handling for Win9x and OS/2 part 1") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Eric Dumazet authored
commit a9f11f96 upstream. Be careful when comparing tcp_time_stamp to some u32 quantity, otherwise result can be surprising. Fixes: 7c106d7e ("[TCP]: TCP Low Priority congestion control") Signed-off-by:
-
David S. Miller authored
commit 5b8481fa upstream. Since that change also made the nfrag function not necessary for exports, remove it. Fixes: 89a23c8b ("ip6_tunnel: Fix missing tunnel encapsulation limit option") Signed-off-by:
-
Craig Gallek authored
commit 89a23c8b upstream. The IPv6 tunneling code tries to insert IPV6_TLV_TNL_ENCAP_LIMIT and IPV6_TLV_PADN options when an encapsulation limit is defined (the default is a limit of 4). An MTU adjustment is done to account for these options as well. However, the options are never present in the generated packets. The issue appears to be a subtlety between IPV6_DSTOPTS and IPV6_RTHDRDSTOPTS defined in RFC 3542. When the IPIP tunnel driver was written, the encap limit options were included as IPV6_RTHDRDSTOPTS in dst0opt of struct ipv6_txoptions. Later, ipv6_push_nfrags_opts was (correctly) updated to require IPV6_RTHDR options when IPV6_RTHDRDSTOPTS are to be used. This caused the options to no longer be included in v6 encapsulated packets. The fix is to use IPV6_DSTOPTS (in dst1opt of struct ipv6_txoptions) instead. IPV6_DSTOPTS do not have the additional IPV6_RTHDR requirement. Fixes: 1df64a85: ("[IPV6]: Add ip6ip6 tunnel driver.") Fixes: 333fad53: ("[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542)") Signed-off-by:
Craig Gallek <kraig@google.com> Signed-off-by:
-
Michael Trimarchi authored
commit 633e8799 upstream. This changed is needed to avoid locking problem during boot as shown: <5>[ 8.824096] Registering SWP/SWPB emulation handler <6>[ 8.977294] clock: disabling unused clocks to save power <3>[ 9.108154] BUG: sleeping function called from invalid context at kernel_albert/kernel/mutex.c:269 <3>[ 9.122894] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0 <4>[ 9.130249] 3 locks held by swapper/0/1: <4>[ 9.134613] #0: (&__lockdep_no_validate__){......}, at: [<c0342430>] __driver_attach+0x58/0xa8 <4>[ 9.144500] #1: (&__lockdep_no_validate__){......}, at: [<c0342440>] __driver_attach+0x68/0xa8 <4>[ 9.154357] #2: (&polling_timer){......}, at: [<c0053770>] run_timer_softirq+0x108/0x3ec <4>[ 9.163726] Backtrace: <4>[ 9.166473] [<c001269c>] (dump_backtrace+0x0/0x114) from [<c067e5f0>] (dump_stack+0x20/0x24) <4>[ 9.175811] r6:00203230 r5:0000010d r4:d782e000 r3:60000113 <4>[ 9.182250] [<c067e5d0>] (dump_stack+0x0/0x24) from [<c007441c>] (__might_sleep+0x10c/0x128) <4>[ 9.191650] [<c0074310>] (__might_sleep+0x0/0x128) from [<c0688f60>] (mutex_lock_nested+0x34/0x36c) <4>[ 9.201660] r5:c02d5350 r4:d79a0c64 <4>[ 9.205688] [<c0688f2c>] (mutex_lock_nested+0x0/0x36c) from [<c02d5350>] (regulator_set_current_limit+0x30/0x118) <4>[ 9.217071] [<c02d5320>] (regulator_set_current_limit+0x0/0x118) from [<c0435ce0>] (update_charger+0x84/0xc4) <4>[ 9.228027] r7:d782fb20 r6:00000101 r5:c1767e94 r4:00000000 <4>[ 9.234436] [<c0435c5c>] (update_charger+0x0/0xc4) from [<c0435d40>] (psy_changed+0x20/0x48) <4>[ 9.243804] r5:d782e000 r4:c1767e94 <4>[ 9.247802] [<c0435d20>] (psy_changed+0x0/0x48) from [<c0435dec>] (polling_timer_func+0x84/0xb8) <4>[ 9.257537] r4:c1767e94 r3:00000002 <4>[ 9.261566] [<c0435d68>] (polling_timer_func+0x0/0xb8) from [<c00537e4>] (run_timer_softirq+0x17c/0x3ec) <4>[ 9.272033] r4:c1767eb0 r3:00000000 <4>[ 9.276062] [<c0053668>] (run_timer_softirq+0x0/0x3ec) from [<c004b000>] (__do_softirq+0xf0/0x298) <4>[ 9.286010] [<c004af10>] (__do_softirq+0x0/0x298) from [<c004b650>] (irq_exit+0x98/0xa0) <4>[ 9.295013] [<c004b5b8>] (irq_exit+0x0/0xa0) from [<c000edbc>] (handle_IRQ+0x60/0xc0) <4>[ 9.303680] r4:c1194e98 r3:c00bc778 <4>[ 9.307708] [<c000ed5c>] (handle_IRQ+0x0/0xc0) from [<c0008504>] (gic_handle_irq+0x34/0x68) <4>[ 9.316955] r8:000ac383 r7:d782fc3c r6:d782fc08 r5:c11936c4 r4:e0802100 <4>[ 9.324310] r3:c026ba48 <4>[ 9.327301] [<c00084d0>] (gic_handle_irq+0x0/0x68) from [<c068c2c0>] (__irq_svc+0x40/0x74) <4>[ 9.336456] Exception stack(0xd782fc08 to 0xd782fc50) <4>[ 9.342041] fc00: d6e30e6c ac383627 00000000 ac383417 ea19c000 ea200000 <4>[ 9.351104] fc20: beffffff 00000667 000ac383 d6e30670 d6e3066c d782fc94 d782fbe8 d782fc50 <4>[ 9.360168] fc40: c026ba48 c001d1f0 00000113 ffffffff Fixes: b2998049 ("[BATTERY] pda_power platform driver") Signed-off-by:
Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by:
Anthony Brandon <anthony@amarulasolutions.com> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> [bwh: Backported to 3.2: - Drop changes in otg_handle_notification() - Adjust filename] Signed-off-by:
-
Szymon Janc authored
commit ab89f0bd upstream. Running 32bit userspace on 64bit kernel results in MSG_CMSG_COMPAT being defined as 0x80000000. This results in sendmsg failure if used from 32bit userspace running on 64bit kernel. Fix this by accounting for MSG_CMSG_COMPAT in flags check in hci_sock_sendmsg. Signed-off-by:
Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by:
Marko Kiiskila <marko@runtime.io> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Christophe Leroy authored
commit 8b8642af upstream. Since commit 5093bb96 ("powerpc/QE: switch to the cpm_muram implementation"), muram area is not part of immrbar mapping anymore so immrbar_virt_to_phys() is not usable anymore. Fixes: 5093bb96 ("powerpc/QE: switch to the cpm_muram implementation") Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Acked-by:
Li Yang <pku.leo@gmail.com> Signed-off-by:
Scott Wood <oss@buserror.net> [bwh: Backported to 3.2: adjust filename] Signed-off-by:
-
Christoph Hellwig authored
commit c6ade20f upstream. The WRITE SAME to TRIM translation rewrites the DATA OUT buffer. While the SCSI code accomodates for this by passing a read-writable buffer userspace applications don't cater for this behavior. In fact it can be used to rewrite e.g. a readonly file through mmap and should be considered as a security fix. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Michael J. Ruhl authored
commit 8561eae6 upstream. The Infiniband spec defines "A multicast address is defined by a MGID and a MLID" (section 10.5). Currently the MLID value is not validated. Add check to verify that the MLID value is in the correct address range. Fixes: 0c33aeed ("[IB] Add checks to multicast attach and detach") Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Reviewed-by:
Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> [bwh: Backported to 3.2: use literal number instead of IB_MULTICAST_LID_BASE] Signed-off-by:
-
Michael J. Ruhl authored
commit 20c7840a upstream. A list of MGID/MLID pairs is built when doing a multicast attach. When the multicast detach is called, the list is searched, and regardless of the search outcome, the driver detach is called. If an MGID/MLID pair is not on the list, driver detach should not be called, and an error should be returned. Calling the driver without removing an MGID/MLID pair from the list can leave the core and driver out of sync. Fixes: f4e40156 ("IB/uverbs: track multicast group membership for userspace QPs") Reviewed-by:
-
Alexey Brodkin authored
commit 3d615964 upstream. DWC3 driver uses of_usb_get_phy_mode() which is implemented in drivers/usb/phy/of.c and in bare minimal configuration it might not be pulled in kernel binary. In case of ARC or ARM this could be easily reproduced with "allnodefconfig" +CONFIG_USB=m +CONFIG_USB_DWC3=m. On building all ends-up with: ---------------------->8------------------ Kernel: arch/arm/boot/Image is ready Kernel: arch/arm/boot/zImage is ready Building modules, stage 2. MODPOST 5 modules ERROR: "of_usb_get_phy_mode" [drivers/usb/dwc3/dwc3.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 ---------------------->8------------------ Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Felipe Balbi <balbi@kernel.org> Cc: Felix Fietkau <nbd@nbd.name> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: linux-snps-arc@lists.infradead.org Signed-off-by:
-
Stefan Assmann authored
commit c4e649b0 upstream. The ASUS M2N-LR should not trigger boot interrupt quirks although it carries an Intel 6702PXH. On this board the boot interrupt quirks cause incorrect IRQ assignments and should be disabled. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=43074Tested-by:
Solomon Peachy <pizza@shaftnet.org> Signed-off-by:
Stefan Assmann <sassmann@kpanic.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Liping Zhang authored
commit 53b56da8 upstream. After converting to use rcu for conntrack hash, one CPU may update the ct->status via ctnetlink, while another CPU may process the packets and update the ct->status. So the non-atomic operation "ct->status |= status;" via ctnetlink becomes unsafe, and this may clear the IPS_DYING_BIT bit set by another CPU unexpectedly. For example: CPU0 CPU1 ctnetlink_change_status __nf_conntrack_find_get old = ct->status nf_ct_gc_expired - nf_ct_kill - test_and_set_bit(IPS_DYING_BIT new = old | status; - ct->status = new; <-- oops, _DYING_ is cleared! Now using a series of atomic bit operation to solve the above issue. Also note, user shouldn't set IPS_TEMPLATE, IPS_SEQ_ADJUST directly, so make these two bits be unchangable too. If we set the IPS_TEMPLATE_BIT, ct will be freed by nf_ct_tmpl_free, but actually it is alloced by nf_conntrack_alloc. If we set the IPS_SEQ_ADJUST_BIT, this may cause the NULL pointer deference, as the nfct_seqadj(ct) maybe NULL. Last, add some comments to describe the logic change due to the commit a963d710 ("netfilter: ctnetlink: Fix regression in CTA_STATUS processing"), which makes me feel a little confusing. Fixes: 76507f69 ("[NETFILTER]: nf_conntrack: use RCU for conntrack hash") Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> [bwh: Backported to 3.2: - IPS_UNCHANGEABLE_MASK was not previously defined and ctnetlink_update_status() is not needed - enum ip_conntrack_status only assigns 13 bits - Adjust filename] Signed-off-by:
-
Ashish Kalra authored
commit d594aa02 upstream. The minimum size for a new stack (512 bytes) setup for arch/x86/boot components when the bootloader does not setup/provide a stack for the early boot components is not "enough". The setup code executing as part of early kernel startup code, uses the stack beyond 512 bytes and accidentally overwrites and corrupts part of the BSS section. This is exposed mostly in the early video setup code, where it was corrupting BSS variables like force_x, force_y, which in-turn affected kernel parameters such as screen_info (screen_info.orig_video_cols) and later caused an exception/panic in console_init(). Most recent boot loaders setup the stack for early boot components, so this stack overwriting into BSS section issue has not been exposed. Signed-off-by:
Ashish Kalra <ashish@bluestacks.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170419152015.10011-1-ashishkalra@Ashishs-MacBook-Pro.localSigned-off-by:
-
Peter Chen authored
commit 6fc091fb upstream. Print correct command ring address using 'val_64'. Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Frank Schaefer authored
commit 7f140fc2 upstream. Enabling vflip currently causes wrong colors. It seems that (at least with the current sensor setup) REG04_VFLIP_IMG only changes the vertical readout direction. Because pixels are arranged RGRG... in odd lines and GBGB... in even lines, either a one line shift or even/odd line swap is required, too, but apparently this doesn't happen. I finally figured out that this can be done manually by setting REG04_VREF_EN. Looking at hflip, it turns out that bit REG04_HREF_EN is set there permanetly, but according to my tests has no effect on the pixel readout order. So my conclusion is that the current documentation of sensor register 0x04 is wrong (has changed after preliminary datasheet version 2.2). I'm pretty sure that automatic vertical line shift/switch can be enabled, too, but until anyone finds ot how this works, we have to stick with manual switching. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by:
-
Alyssa Milburn authored
commit 950e252c upstream. Otherwise the i2c transfer functions can read or write beyond the end of stack or heap buffers. Signed-off-by:
Alyssa Milburn <amilburn@zall.org> Signed-off-by:
-
