The thmc50 driver is the last user of I2C_CLIENT_MODULE_PARM, and I
would like to get rid of that macro.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Krzysztof Helt <krzysztof.h1@wp.pl>

This driver provides support for the ADC integrated into the
Freescale MC13783 PMIC.
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

The w83791d driver has been in the kernel for a while now,
time to remove the EXPERIMENTAL dependency.
Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Corentin Labbe <corentin.labbe@geomatys.fr>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Juerg Haefliger <juergh@gmail.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Acked-by: "Hans J. Koch" <hjk@linutronix.de>
Cc: Rudolf Marek <r.marek@assembler.cz>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Marc Hulsman <m.hulsman@tudelft.nl>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Andre Prendel <andre.prendel@gmx.de>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

The National Semiconductor LM73 is a single temperature sensor, much
like the famous LM75.
Signed-off-by: Adrien Demarez <adrien.demarez@bolloretelecom.eu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Stop using global variables REG and VAL for I/O port numbers. This is
ugly and unsafe.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Rodolfo Giometti <giometti@linux.it>

This module parameter is there to workaround broken BIOS. I'm not even
sure if it was used in the past 5 years, and it gets in the way of
converting the driver to the MFD infrastructure. So tell the users how
they can do the same from user-space.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Rodolfo Giometti <giometti@linux.it>

The fan2 and fan3 input and output pins can be used as GPIOs. Check
their function before exposing their sysfs attributes and accessing
their registers.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

The VID input pins can alternatively be used as GPIOs. Make sure we
have at least 4 pins used for VID, otherwise don't bother reading and
exposing VID.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Adam Nielsen <a.nielsen@shikadi.net>

Document the case of hybrid automatic fan speed control
implementations, where trip points are associated to both PWM output
channels and temperature input channels.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Add missing documentation and header files to the hardware monitoring
subsystem section.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

The previous patch, commit be4c23c9 was
from the wrong tree and thus broke the current build which had the
channel configuration name changed.

Fix the following build errors:

drivers/hwmon/s3c-hwmon.c: In function 's3c_hwmon_probe':
drivers/hwmon/s3c-hwmon.c:326: warning: initialization from incompatible pointer type
drivers/hwmon/s3c-hwmon.c:331: error: dereferencing pointer to incomplete type
drivers/hwmon/s3c-hwmon.c:336: error: dereferencing pointer to incomplete type
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Merge branches 'timers-for-linus-ntp' and 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus-ntp' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ntp: Provide compability defines (You say MOD_NANO, I say ADJ_NANO)

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: do not execute DEBUG_SHIRQ when irq setup failed

Merge branch 'timers-for-linus-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimer: Fix /proc/timer_list regression
  itimers: Fix racy writes to cpu_itimer fields
  timekeeping: Fix clock_gettime vsyscall time warp

* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timers, init: Limit the number of per cpu calibration bootup messages
  posix-cpu-timers: optimize and document timer_create callback
  clockevents: Add missing include to pacify sparse
  x86: vmiclock: Fix printk format
  x86: Fix printk format due to variable type change
  sparc: fix printk for change of variable type
  clocksource/events: Fix fallout of generic code changes
  nohz: Allow 32-bit machines to sleep for more than 2.15 seconds
  nohz: Track last do_timer() cpu
  nohz: Prevent clocksource wrapping during idle
  nohz: Type cast printk argument
  mips: Use generic mult/shift factor calculation for clocks
  clocksource: Provide a generic mult/shift factor calculation
  clockevents: Use u32 for mult and shift factors
  nohz: Introduce arch_needs_cpu
  nohz: Reuse ktime in sub-functions of tick_check_idle.
  time: Remove xtime_cache
  time: Implement logarithmic time accumulation

Merge branch 'timers-for-linus-hpet' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus-hpet' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: hpet: Make WARN_ON understandable
  x86: arch specific support for remapping HPET MSIs
  intr-remap: generic support for remapping HPET MSIs
  x86, hpet: Simplify the HPET code
  x86, hpet: Disable per-cpu hpet timer if ARAT is supported

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  hwrng: core - Prevent too-small buffer sizes
  hwrng: virtio-rng - Convert to new API
  hwrng: core - Replace u32 in driver API with byte array
  crypto: ansi_cprng - Move FIPS functions under CONFIG_CRYPTO_FIPS
  crypto: testmgr - Add ghash algorithm test before provide to users
  crypto: ghash-clmulni-intel - Put proper .data section in place
  crypto: ghash-clmulni-intel - Use gas macro for PCLMULQDQ-NI and PSHUFB
  crypto: aesni-intel - Use gas macro for AES-NI instructions
  x86: Generate .byte code for some new instructions via gas macro
  crypto: ghash-intel - Fix irq_fpu_usable usage
  crypto: ghash-intel - Add PSHUFB macros
  crypto: ghash-intel - Hard-code pshufb
  crypto: ghash-intel - Fix building failure on x86_32
  crypto: testmgr - Fix warning
  crypto: ansi_cprng - Fix test in get_prng_bytes
  crypto: hash - Remove cra_u.{digest,hash}
  crypto: api - Remove digest case from procfs show handler
  crypto: hash - Remove legacy hash/digest code
  crypto: ansi_cprng - Add FIPS wrapper
  crypto: ghash - Add PCLMULQDQ accelerated implementation

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] iTCO_wdt.c - cleanup chipset documentation
  [WATCHDOG] iTCO_wdt: Add support for Intel Ibex Peak
  [WATCHDOG] CPUFREQ: S3C24XX Watchdog frequency scaling support.

* 'x86-xen-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  cpumask: Use modern cpumask style in Xen

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: UV RTC: Always enable RTC clocksource
  x86: UV RTC: Rename generic_interrupt to x86_platform_ipi
  x86: UV RTC: Clean up error handling
  x86: UV RTC: Add clocksource only boot option
  x86: UV RTC: Fix early expiry handling

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mce: don't restart timer if disabled
  x86: Use -maccumulate-outgoing-args for sane mcount prologues
  x86: Prevent GCC 4.4.x (pentium-mmx et al) function prologue wreckage
  x86: AMD Northbridge: Verify NB's node is online
  x86 VSDO: Fix Kconfig help
  x86: Fix typo in Intel CPU cache size descriptor
  x86: Add new Intel CPU cache size descriptors

Merge branch 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  vgacon: Add support for setting the default cursor state
  vc: Add support for hiding the cursor when creating VTs
  x86, setup: Store the boot cursor state

Merge branch 'x86-reboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-reboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/reboot: Add pci_dev_put in reboot_fixup_32.c for consistency

Merge branch 'x86-process-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-process-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-64: merge the standard and compat start_thread() functions
  x86-64: make compat_start_thread() match start_thread()

* 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: pat: Remove ioremap_default()
  x86: pat: Clean up req_type special case for reserve_memtype()
  x86: Relegate CONFIG_PAT and CONFIG_MTRR configurability to EMBEDDED

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (36 commits)
  x86, mm: Correct the implementation of is_untracked_pat_range()
  x86/pat: Trivial: don't create debugfs for memtype if pat is disabled
  x86, mtrr: Fix sorting of mtrr after subtracting
  x86: Move find_smp_config() earlier and avoid bootmem usage
  x86, platform: Change is_untracked_pat_range() to bool; cleanup init
  x86: Change is_ISA_range() into an inline function
  x86, mm: is_untracked_pat_range() takes a normal semiclosed range
  x86, mm: Call is_untracked_pat_range() rather than is_ISA_range()
  x86: UV SGI: Don't track GRU space in PAT
  x86: SGI UV: Fix BAU initialization
  x86, numa: Use near(er) online node instead of roundrobin for NUMA
  x86, numa, bootmem: Only free bootmem on NUMA failure path
  x86: Change crash kernel to reserve via reserve_early()
  x86: Eliminate redundant/contradicting cache line size config options
  x86: When cleaning MTRRs, do not fold WP into UC
  x86: remove "extern" from function prototypes in <asm/proto.h>
  x86, mm: Report state of NX protections during boot
  x86, mm: Clean up and simplify NX enablement
  x86, pageattr: Make set_memory_(x|nx) aware of NX support
  x86, sleep: Always save the value of EFER
  ...

Fix up conflicts (added both iommu_shutdown and is_untracked_pat_range)
to 'struct x86_platform_ops') in
	arch/x86/include/asm/x86_init.h
	arch/x86/kernel/x86_init.c

Merge branch 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: ucode-amd: Move family check to microcde_amd.c's init function
  x86, ucode-amd: Ensure ucode update on suspend/resume after CPU off/online cycle
  x86: ucode-amd: Convert printk(KERN_*...) to pr_*(...)
  x86: ucode-amd: Don't warn when no ucode is available for a CPU revision
  x86: ucode-amd: Load ucode-patches once and not separately of each CPU
  x86, amd-ucode: Remove needless log messages

Merge branch 'x86-entry-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-entry-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  core: Clean up user return notifers use of per_cpu

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Greg KH <gregkh@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>