- 26 Jul, 2019 40 commits
-
-
Ard Biesheuvel authored
commit ed527b13 upstream. The CAAM driver currently violates an undocumented and slightly controversial requirement imposed by the crypto stack that a buffer referred to by the request structure via its virtual address may not be modified while any scatterlists passed via the same request structure are mapped for inbound DMA. This may result in errors like alg: aead: decryption failed on test 1 for gcm_base(ctr-aes-caam,ghash-generic): ret=74 alg: aead: Failed to load transform for gcm(aes): -2 on non-cache coherent systems, due to the fact that the GCM driver passes an IV buffer by virtual address which shares a cacheline with the auth_tag buffer passed via a scatterlist, resulting in corruption of the auth_tag when the IV is updated while the DMA mapping is live. Since the IV that is returned to the caller is only valid for CBC mode, and given that the in-kernel users of CBC (such as CTS) don't trigger the same issue as the GCM driver, let's just disable the output IV generation for all modes except CBC for the time being. Fixes: 854b06f7 ("crypto: caam - properly set IV after {en,de}crypt") Cc: Horia Geanta <horia.geanta@nxp.com> Cc: Iuliana Prodan <iuliana.prodan@nxp.com> Reported-by:
Sascha Hauer <s.hauer@pengutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by:
Horia Geanta <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
commit 5c6bc4df upstream. Changing ghash_mod_init() to be subsys_initcall made it start running before the alignment fault handler has been installed on ARM. In kernel builds where the keys in the ghash test vectors happened to be misaligned in the kernel image, this exposed the longstanding bug that ghash_setkey() is incorrectly casting the key buffer (which can have any alignment) to be128 for passing to gf128mul_init_4k_lle(). Fix this by memcpy()ing the key to a temporary buffer. Don't fix it by setting an alignmask on the algorithm instead because that would unnecessarily force alignment of the data too. Fixes: 2cdc6899 ("crypto: ghash - Add GHASH digest algorithm for GCM") Reported-by:
Peter Robinson <pbrobinson@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Eric Biggers <ebiggers@google.com> Tested-by:
-
Finn Thain authored
commit 78ff751f upstream. A system bus error during a PDMA transfer can mess up the calculation of the transfer residual (the PDMA handshaking hardware lacks a byte counter). This results in data corruption. The algorithm in this patch anticipates a bus error by starting each transfer with a MOVE.B instruction. If a bus error is caught the transfer will be retried. If a bus error is caught later in the transfer (for a MOVE.W instruction) the transfer gets failed and subsequent requests for that target will use PIO instead of PDMA. This avoids the "!REQ and !ACK" error so the severity level of that message is reduced to KERN_DEBUG. Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org # v4.14+ Fixes: 3a0f64bf ("mac_scsi: Fix pseudo DMA implementation") Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Reported-by:
Chris Jones <chris@martin-jones.com> Tested-by:
Stan Johnson <userm57@yahoo.com> Tested-by:
Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Finn Thain authored
commit 7398cee4 upstream. Some targets introduce delays when handshaking the response to certain commands. For example, a disk may send a 96-byte response to an INQUIRY command (or a 24-byte response to a MODE SENSE command) too slowly. Apparently the first 12 or 14 bytes are handshaked okay but then the system bus error timeout is reached while transferring the next word. Since the scsi bus phase hasn't changed, the driver then sets the target borken flag to prevent further PDMA transfers. The driver also logs the warning, "switching to slow handshake". Raise the PDMA threshold to 512 bytes so that PIO transfers will be used for these commands. This default is sufficiently low that PDMA will still be used for READ and WRITE commands. The existing threshold (16 bytes) was chosen more or less at random. However, best performance requires the threshold to be as low as possible. Those systems that don't need the PIO workaround at all may benefit from mac_scsi.setup_use_pdma=1 Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: stable@vger.kernel.org # v4.14+ Fixes: 3a0f64bf ("mac_scsi: Fix pseudo DMA implementation") Signed-off-by:
-
Shivasharan S authored
commit c8f96df5 upstream. In megasas_get_target_prop(), driver is incorrectly calculating the target ID for devices with channel 1 and 3. Due to this, firmware will either fail the command (if there is no device with the target id sent from driver) or could return the properties for a target which was not intended. Devices could end up with the wrong queue depth due to this. Fix target id calculation for channel 1 and 3. Fixes: 96188a89 ("scsi: megaraid_sas: NVME interface target prop added") Cc: stable@vger.kernel.org Signed-off-by:
Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by:
-
Benjamin Block authored
commit 106d45f3 upstream. When tracing instances where we open and close WKA ports, we also pass the request-ID of the respective FSF command. But after successfully sending the FSF command we must not use the request-object anymore, as this might result in an use-after-free (see "zfcp: fix request object use-after-free in send path causing seqno errors" ). To fix this add a new variable that caches the request-ID before sending the request. This won't change during the hand-off to the FCP channel, and so it's safe to trace this cached request-ID later, instead of using the request object. Signed-off-by:
Benjamin Block <bblock@linux.ibm.com> Fixes: d27a7cb9 ("zfcp: trace on request for open and close of WKA port") Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by:
Steffen Maier <maier@linux.ibm.com> Reviewed-by:
Jens Remus <jremus@linux.ibm.com> Signed-off-by:
-
Benjamin Block authored
commit b76becde upstream. With a recent change to our send path for FSF commands we introduced a possible use-after-free of request-objects, that might further lead to zfcp crafting bad requests, which the FCP channel correctly complains about with an error (FSF_PROT_SEQ_NUMB_ERROR). This error is then handled by an adapter-wide recovery. The following sequence illustrates the possible use-after-free: Send Path: int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action) { struct zfcp_fsf_req *req; ... spin_lock_irq(&qdio->req_q_lock); // ^^^^^^^^^^^^^^^^ // protects QDIO queue during sending ... req = zfcp_fsf_req_create(qdio, FSF_QTCB_OPEN_PORT_WITH_DID, SBAL_SFLAGS0_TYPE_READ, qdio->adapter->pool.erp_req); // ^^^^^^^^^^^^^^^^^^^ // allocation of the request-object ... retval = zfcp_fsf_req_send(req); ... spin_unlock_irq(&qdio->req_q_lock); return retval; } static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) { struct zfcp_adapter *adapter = req->adapter; struct zfcp_qdio *qdio = adapter->qdio; ... zfcp_reqlist_add(adapter->req_list, req); // ^^^^^^^^^^^^^^^^ // add request to our driver-internal hash-table for tracking // (protected by separate lock req_list->lock) ... if (zfcp_qdio_send(qdio, &req->qdio_req)) { // ^^^^^^^^^^^^^^ // hand-off the request to FCP channel; // the request can complete at any point now ... } /* Don't increase for unsolicited status */ if (!zfcp_fsf_req_is_status_read_buffer(req)) // ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ // possible use-after-free adapter->fsf_req_seq_no++; // ^^^^^^^^^^^^^^^^ // because of the use-after-free we might // miss this accounting, and as follow-up // this results in the FCP channel error // FSF_PROT_SEQ_NUMB_ERROR adapter->req_no++; return 0; } static inline bool zfcp_fsf_req_is_status_read_buffer(struct zfcp_fsf_req *req) { return req->qtcb == NULL; // ^^^^^^^^^ // possible use-after-free } Response Path: void zfcp_fsf_reqid_check(struct zfcp_qdio *qdio, int sbal_idx) { ... struct zfcp_fsf_req *fsf_req; ... for (idx = 0; idx < QDIO_MAX_ELEMENTS_PER_BUFFER; idx++) { ... fsf_req = zfcp_reqlist_find_rm(adapter->req_list, req_id); // ^^^^^^^^^^^^^^^^^^^^ // remove request from our driver-internal // hash-table (lock req_list->lock) ... zfcp_fsf_req_complete(fsf_req); } } static void zfcp_fsf_req_complete(struct zfcp_fsf_req *req) { ... if (likely(req->status & ZFCP_STATUS_FSFREQ_CLEANUP)) zfcp_fsf_req_free(req); // ^^^^^^^^^^^^^^^^^ // free memory for request-object else complete(&req->completion); // ^^^^^^^^ // completion notification for code-paths that wait // synchronous for the completion of the request; in // those the memory is freed separately } The result of the use-after-free only affects the send path, and can not lead to any data corruption. In case we miss the sequence-number accounting, because the memory was already re-purposed, the next FSF command will fail with said FCP channel error, and we will recover the whole adapter. This causes no additional errors, but it slows down traffic. There is a slight chance of the same thing happen again recursively after the adapter recovery, but so far this has not been seen. This was seen under z/VM, where the send path might run on a virtual CPU that gets scheduled away by z/VM, while the return path might still run, and so create the necessary timing. Running with KASAN can also slow down the kernel sufficiently to run into this user-after-free, and then see the report by KASAN. To fix this, simply pull the test for the sequence-number accounting in front of the hand-off to the FCP channel (this information doesn't change during hand-off), but leave the sequence-number accounting itself where it is. To make future regressions of the same kind less likely, add comments to all closely related code-paths. Signed-off-by:
-
Damien Le Moal authored
commit 0cdc5858 upstream. kbuild test robot gets the following compilation warning using gcc 7.4 cross compilation for c6x (GCC_VERSION=7.4.0 make.cross ARCH=c6x). In file included from include/asm-generic/bug.h:18:0, from arch/c6x/include/asm/bug.h:12, from include/linux/bug.h:5, from include/linux/thread_info.h:12, from include/asm-generic/current.h:5, from ./arch/c6x/include/generated/asm/current.h:1, from include/linux/sched.h:12, from include/linux/blkdev.h:5, from drivers//scsi/sd_zbc.c:11: drivers//scsi/sd_zbc.c: In function 'sd_zbc_read_zones': >> include/linux/kernel.h:62:48: warning: 'zone_blocks' may be used uninitialized in this function [-Wmaybe-uninitialized] #define __round_mask(x, y) ((__typeof__(x))((y)-1)) ^ drivers//scsi/sd_zbc.c:464:6: note: 'zone_blocks' was declared here u32 zone_blocks; ^~~~~~~~~~~ This is a false-positive report. The variable zone_blocks is always initialized in sd_zbc_check_zones() before use. It is not initialized only and only if sd_zbc_check_zones() fails. Avoid this warning by initializing the zone_blocks variable to 0. Fixes: 5f832a39 ("scsi: sd_zbc: Fix sd_zbc_check_zones() error checks") Cc: Stable <stable@vger.kernel.org> Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Ming Lei authored
commit f9b0530f upstream. When scsi_init_sense_cache(host) is called concurrently from different hosts, each code path may find that no cache has been created and allocate a new one. The lack of locking can lead to potentially overriding a cache allocated by a different host. Fix the issue by moving 'mutex_lock(&scsi_sense_cache_mutex)' before scsi_select_sense_cache(). Fixes: 0a6ac4ee ("scsi: respect unchecked_isa_dma for blk-mq") Cc: Stable <stable@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
Finn Thain authored
commit 25fcf94a upstream. This reverts commit 4822827a. The purpose of that commit was to suppress a timeout warning message which appeared to be caused by target latency. But suppressing the warning is undesirable as the warning may indicate a messed up transfer count. Another problem with that commit is that 15 ms is too long to keep interrupts disabled as interrupt latency can cause system clock drift and other problems. Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: stable@vger.kernel.org Fixes: 4822827a ("scsi: ncr5380: Increase register polling limit") Signed-off-by:
-
Finn Thain authored
commit f9dfed1c upstream. A PDMA error is handled in the core driver by setting the device's 'borken' flag and aborting the command. Unfortunately, do_abort() is not dependable. Perform a SCSI bus reset instead, to make sure that the command fails and gets retried. Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: stable@vger.kernel.org # v4.20+ Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Finn Thain authored
commit 57f31326 upstream. The reselection interrupt gets disabled during selection and must be re-enabled when hostdata->connected becomes NULL. If it isn't re-enabled a disconnected command may time-out or the target may wedge the bus while trying to reselect the host. This can happen after a command is aborted. Fix this by enabling the reselection interrupt in NCR5380_main() after calls to NCR5380_select() and NCR5380_information_transfer() return. Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: stable@vger.kernel.org # v4.9+ Fixes: 8b00c3d5 ("ncr5380: Implement new eh_abort_handler") Signed-off-by:
-
Juergen Gross authored
commit a1078e82 upstream. Instead of trying to allocate pages with GFP_USER in add_ballooned_pages() check the available free memory via si_mem_available(). GFP_USER is far less limiting memory exhaustion than the test via si_mem_available(). This will avoid dom0 running out of memory due to excessive foreign page mappings especially on ARM and on x86 in PVH mode, as those don't have a pre-ballooned area which can be used for foreign mappings. As the normal ballooning suffers from the same problem don't balloon down more than si_mem_available() pages in one iteration. At the same time limit the default maximum number of retries. This is part of XSA-300. Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Denis Efremov authored
[ Upstream commit da99466a ] This fixes a global out-of-bounds read access in the copy_buffer function of the floppy driver. The FDDEFPRM ioctl allows one to set the geometry of a disk. The sect and head fields (unsigned int) of the floppy_drive structure are used to compute the max_sector (int) in the make_raw_rw_request function. It is possible to overflow the max_sector. Next, max_sector is passed to the copy_buffer function and used in one of the memcpy calls. An unprivileged user could trigger the bug if the device is accessible, but requires a floppy disk to be inserted. The patch adds the check for the .sect * .head multiplication for not overflowing in the set_geometry function. The bug was found by syzkaller. Signed-off-by:
Denis Efremov <efremov@ispras.ru> Tested-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Denis Efremov authored
[ Upstream commit 9b04609b ] This fixes the invalid pointer dereference in the drive_name function of the floppy driver. The native_format field of the struct floppy_drive_params is used as floppy_type array index in the drive_name function. Thus, the field should be checked the same way as the autodetect field. To trigger the bug, one could use a value out of range and set the drive parameters with the FDSETDRVPRM ioctl. Next, FDGETDRVTYP ioctl should be used to call the drive_name. A floppy disk is not required to be inserted. CAP_SYS_ADMIN is required to call FDSETDRVPRM. The patch adds the check for a value of the native_format field to be in the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices. The bug was found by syzkaller. Signed-off-by:
-
Denis Efremov authored
[ Upstream commit 5635f897 ] This fixes a global out-of-bounds read access in the next_valid_format function of the floppy driver. The values from autodetect field of the struct floppy_drive_params are used as indices for the floppy_type array in the next_valid_format function 'floppy_type[DP->autodetect[probed_format]].sect'. To trigger the bug, one could use a value out of range and set the drive parameters with the FDSETDRVPRM ioctl. A floppy disk is not required to be inserted. CAP_SYS_ADMIN is required to call FDSETDRVPRM. The patch adds the check for values of the autodetect field to be in the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices. The bug was found by syzkaller. Signed-off-by:
-
Denis Efremov authored
[ Upstream commit f3554aeb ] This fixes a divide by zero error in the setup_format_params function of the floppy driver. Two consecutive ioctls can trigger the bug: The first one should set the drive geometry with such .sect and .rate values for the F_SECT_PER_TRACK to become zero. Next, the floppy format operation should be called. A floppy disk is not required to be inserted. An unprivileged user could trigger the bug if the device is accessible. The patch checks F_SECT_PER_TRACK for a non-zero value in the set_geometry function. The proper check should involve a reasonable upper limit for the .sect and .rate fields, but it could change the UAPI. The patch also checks F_SECT_PER_TRACK in the setup_format_params, and cancels the formatting operation in case of zero. The bug was found by syzkaller. Signed-off-by:
-
Andrii Nakryiko authored
[ Upstream commit 763ff0e7 ] Similar issue was fixed in cdfc7f88 ("libbpf: fix GCC8 warning for strncpy") already. This one was missed. Fixing now. Cc: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Acked-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Dennis Zhou authored
[ Upstream commit c9b3007f ] The iolatency controller is based on rq_qos. It increments on rq_qos_throttle() and decrements on either rq_qos_cleanup() or rq_qos_done_bio(). a3fb01ba fixes the double accounting issue where blk_mq_make_request() may call both rq_qos_cleanup() and rq_qos_done_bio() on REQ_NO_WAIT. So checking STS_AGAIN prevents the double decrement. The above works upstream as the only way we can get STS_AGAIN is from blk_mq_get_request() failing. The STS_AGAIN handling isn't a real problem as bio_endio() skipping only happens on reserved tag allocation failures which can only be caused by driver bugs and already triggers WARN. However, the fix creates a not so great dependency on how STS_AGAIN can be propagated. Internally, we (Facebook) carry a patch that kills read ahead if a cgroup is io congested or a fatal signal is pending. This combined with chained bios progagate their bi_status to the parent is not already set can can cause the parent bio to not clean up properly even though it was successful. This consequently leaks the inflight counter and can hang all IOs under that blkg. To nip the adverse interaction early, this removes the rq_qos_cleanup() callback in iolatency in favor of cleaning up always on the rq_qos_done_bio() path. Fixes: a3fb01ba ("blk-iolatency: only account submitted bios") Debugged-by:
Tejun Heo <tj@kernel.org> Debugged-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Dennis Zhou <dennis@kernel.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 9fe06a51 ] A recent commit efa14c39 ("iavf: allow null RX descriptors") added a null pointer sanity check on rx_buffer, however, rx_buffer is being dereferenced before that check, which implies a null pointer dereference bug can potentially occur. Fix this by only dereferencing rx_buffer until after the null pointer check. Addresses-Coverity: ("Dereference before null check") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Huazhong Tan authored
[ Upstream commit f96315f2 ] When change MTU or other operations, which just calling .reset_notify to do HNAE3_DOWN_CLIENT and HNAE3_UP_CLIENT, then the netdev_tx_reset_queue() in the hns3_clear_all_ring() will be ignored. So the dev_watchdog() may misdiagnose a TX timeout. This patch separates netdev_tx_reset_queue() from hns3_clear_all_ring(), and unifies hns3_clear_all_ring() and hns3_force_clear_all_ring into one, since they are doing similar things. Fixes: 3a30964a ("net: hns3: delay ring buffer clearing during reset") Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Josua Mayer authored
[ Upstream commit 433a06d7 ] Defer probing of the orion-mdio interface when getting a clock returns EPROBE_DEFER. This avoids locking up the Armada 8k SoC when mdio is used before all clocks have been enabled. Signed-off-by:
Josua Mayer <josua@solid-run.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Ilya Maximets authored
[ Upstream commit bf0bdd13 ] Unlike driver mode, generic xdp receive could be triggered by different threads on different CPU cores at the same time leading to the fill and rx queue breakage. For example, this could happen while sending packets from two processes to the first interface of veth pair while the second part of it is open with AF_XDP socket. Need to take a lock for each generic receive to avoid race. Fixes: c497176c ("xsk: add Rx receive functions and poll support") Signed-off-by:
Ilya Maximets <i.maximets@samsung.com> Acked-by:
William Tu <u9012063@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit a2bed907 ] Current gtp_newlink() could be called after unregister_pernet_subsys(). gtp_newlink() uses gtp_net but it can be destroyed by unregister_pernet_subsys(). So unregister_pernet_subsys() should be called after rtnl_link_unregister(). Test commands: #SHELL 1 while : do for i in {1..5} do ./gtp-link add gtp$i & done killall gtp-link done #SHELL 2 while : do modprobe -rv gtp done Splat looks like: [ 753.176631] BUG: KASAN: use-after-free in gtp_newlink+0x9b4/0xa5c [gtp] [ 753.177722] Read of size 8 at addr ffff8880d48f2458 by task gtp-link/7126 [ 753.179082] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G W 5.2.0-rc6+ #50 [ 753.185801] Call Trace: [ 753.186264] dump_stack+0x7c/0xbb [ 753.186863] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.187583] print_address_description+0xc7/0x240 [ 753.188382] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.189097] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.189846] __kasan_report+0x12a/0x16f [ 753.190542] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.191298] kasan_report+0xe/0x20 [ 753.191893] gtp_newlink+0x9b4/0xa5c [gtp] [ 753.192580] ? __netlink_ns_capable+0xc3/0xf0 [ 753.193370] __rtnl_newlink+0xb9f/0x11b0 [ ... ] [ 753.241201] Allocated by task 7186: [ 753.241844] save_stack+0x19/0x80 [ 753.242399] __kasan_kmalloc.constprop.3+0xa0/0xd0 [ 753.243192] __kmalloc+0x13e/0x300 [ 753.243764] ops_init+0xd6/0x350 [ 753.244314] register_pernet_operations+0x249/0x6f0 [ ... ] [ 753.251770] Freed by task 7178: [ 753.252288] save_stack+0x19/0x80 [ 753.252833] __kasan_slab_free+0x111/0x150 [ 753.253962] kfree+0xc7/0x280 [ 753.254509] ops_free_list.part.11+0x1c4/0x2d0 [ 753.255241] unregister_pernet_operations+0x262/0x390 [ ... ] [ 753.285883] list_add corruption. next->prev should be prev (ffff8880d48f2458), but was ffff8880d497d878. (next. [ 753.287241] ------------[ cut here ]------------ [ 753.287794] kernel BUG at lib/list_debug.c:25! [ 753.288364] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 753.289099] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G B W 5.2.0-rc6+ #50 [ 753.291036] RIP: 0010:__list_add_valid+0x74/0xd0 [ 753.291589] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 89 d9 48b [ 753.293779] RSP: 0018:ffff8880cae8f398 EFLAGS: 00010286 [ 753.294401] RAX: 0000000000000075 RBX: ffff8880d497d878 RCX: 0000000000000000 [ 753.296260] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed10195d1e69 [ 753.297070] RBP: ffff8880cd250ae0 R08: ffffed101b4bff21 R09: ffffed101b4bff21 [ 753.297899] R10: 0000000000000001 R11: ffffed101b4bff20 R12: ffff8880d497d878 [ 753.298703] R13: 0000000000000000 R14: ffff8880cd250ae0 R15: ffff8880d48f2458 [ 753.299564] FS: 00007f5f79805740(0000) GS:ffff8880da400000(0000) knlGS:0000000000000000 [ 753.300533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 753.301231] CR2: 00007fe8c7ef4f10 CR3: 00000000b71a6006 CR4: 00000000000606f0 [ 753.302183] Call Trace: [ 753.302530] gtp_newlink+0x5f6/0xa5c [gtp] [ 753.303037] ? __netlink_ns_capable+0xc3/0xf0 [ 753.303576] __rtnl_newlink+0xb9f/0x11b0 [ 753.304092] ? rtnl_link_unregister+0x230/0x230 Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 1788b856 ] gtp_encap_destroy() is called twice. 1. When interface is deleted. 2. When udp socket is destroyed. either gtp->sk0 or gtp->sk1u could be freed by sock_put() in gtp_encap_destroy(). so, when gtp_encap_destroy() is called again, it would uses freed sk pointer. patch makes gtp_encap_destroy() to set either gtp->sk0 or gtp->sk1u to null. in addition, both gtp->sk0 and gtp->sk1u pointer are protected by rtnl_lock. so, rtnl_lock() is added. Test command: gtp-link add gtp1 & killall gtp-link ip link del gtp1 Splat looks like: [ 83.182767] BUG: KASAN: use-after-free in __lock_acquire+0x3a20/0x46a0 [ 83.184128] Read of size 8 at addr ffff8880cc7d5360 by task ip/1008 [ 83.185567] CPU: 1 PID: 1008 Comm: ip Not tainted 5.2.0-rc6+ #50 [ 83.188469] Call Trace: [ ... ] [ 83.200126] lock_acquire+0x141/0x380 [ 83.200575] ? lock_sock_nested+0x3a/0xf0 [ 83.201069] _raw_spin_lock_bh+0x38/0x70 [ 83.201551] ? lock_sock_nested+0x3a/0xf0 [ 83.202044] lock_sock_nested+0x3a/0xf0 [ 83.202520] gtp_encap_destroy+0x18/0xe0 [gtp] [ 83.203065] gtp_encap_disable.isra.14+0x13/0x50 [gtp] [ 83.203687] gtp_dellink+0x56/0x170 [gtp] [ 83.204190] rtnl_delete_link+0xb4/0x100 [ ... ] [ 83.236513] Allocated by task 976: [ 83.236925] save_stack+0x19/0x80 [ 83.237332] __kasan_kmalloc.constprop.3+0xa0/0xd0 [ 83.237894] kmem_cache_alloc+0xd8/0x280 [ 83.238360] sk_prot_alloc.isra.42+0x50/0x200 [ 83.238874] sk_alloc+0x32/0x940 [ 83.239264] inet_create+0x283/0xc20 [ 83.239684] __sock_create+0x2dd/0x540 [ 83.240136] __sys_socket+0xca/0x1a0 [ 83.240550] __x64_sys_socket+0x6f/0xb0 [ 83.240998] do_syscall_64+0x9c/0x450 [ 83.241466] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 83.242061] [ 83.242249] Freed by task 0: [ 83.242616] save_stack+0x19/0x80 [ 83.243013] __kasan_slab_free+0x111/0x150 [ 83.243498] kmem_cache_free+0x89/0x250 [ 83.244444] __sk_destruct+0x38f/0x5a0 [ 83.245366] rcu_core+0x7e9/0x1c20 [ 83.245766] __do_softirq+0x213/0x8fa Fixes: 1e3a3abd ("gtp: make GTP sockets in gtp_newlink optional") Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 3f167e19 ] ipv4_pdp_add() is called in RCU read-side critical section. So GFP_KERNEL should not be used in the function. This patch make ipv4_pdp_add() to use GFP_ATOMIC instead of GFP_KERNEL. Test commands: gtp-link add gtp1 & gtp-tunnel add gtp1 v1 100 200 1.1.1.1 2.2.2.2 Splat looks like: [ 130.618881] ============================= [ 130.626382] WARNING: suspicious RCU usage [ 130.626994] 5.2.0-rc6+ #50 Not tainted [ 130.627622] ----------------------------- [ 130.628223] ./include/linux/rcupdate.h:266 Illegal context switch in RCU read-side critical section! [ 130.629684] [ 130.629684] other info that might help us debug this: [ 130.629684] [ 130.631022] [ 130.631022] rcu_scheduler_active = 2, debug_locks = 1 [ 130.632136] 4 locks held by gtp-tunnel/1025: [ 130.632925] #0: 000000002b93c8b7 (cb_lock){++++}, at: genl_rcv+0x15/0x40 [ 130.634159] #1: 00000000f17bc999 (genl_mutex){+.+.}, at: genl_rcv_msg+0xfb/0x130 [ 130.635487] #2: 00000000c644ed8e (rtnl_mutex){+.+.}, at: gtp_genl_new_pdp+0x18c/0x1150 [gtp] [ 130.636936] #3: 0000000007a1cde7 (rcu_read_lock){....}, at: gtp_genl_new_pdp+0x187/0x1150 [gtp] [ 130.638348] [ 130.638348] stack backtrace: [ 130.639062] CPU: 1 PID: 1025 Comm: gtp-tunnel Not tainted 5.2.0-rc6+ #50 [ 130.641318] Call Trace: [ 130.641707] dump_stack+0x7c/0xbb [ 130.642252] ___might_sleep+0x2c0/0x3b0 [ 130.642862] kmem_cache_alloc_trace+0x1cd/0x2b0 [ 130.643591] gtp_genl_new_pdp+0x6c5/0x1150 [gtp] [ 130.644371] genl_family_rcv_msg+0x63a/0x1030 [ 130.645074] ? mutex_lock_io_nested+0x1090/0x1090 [ 130.645845] ? genl_unregister_family+0x630/0x630 [ 130.646592] ? debug_show_all_locks+0x2d0/0x2d0 [ 130.647293] ? check_flags.part.40+0x440/0x440 [ 130.648099] genl_rcv_msg+0xa3/0x130 [ ... ] Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit e198987e ] gtp_encap_enable_socket() and gtp_encap_destroy() are not protected by rcu_read_lock(). and it's not safe to write sk->sk_user_data. This patch make these functions to use lock_sock() instead of rcu_dereference_sk_user_data(). Test commands: gtp-link add gtp1 Splat looks like: [ 83.238315] ============================= [ 83.239127] WARNING: suspicious RCU usage [ 83.239702] 5.2.0-rc6+ #49 Not tainted [ 83.240268] ----------------------------- [ 83.241205] drivers/net/gtp.c:799 suspicious rcu_dereference_check() usage! [ 83.243828] [ 83.243828] other info that might help us debug this: [ 83.243828] [ 83.246325] [ 83.246325] rcu_scheduler_active = 2, debug_locks = 1 [ 83.247314] 1 lock held by gtp-link/1008: [ 83.248523] #0: 0000000017772c7f (rtnl_mutex){+.+.}, at: __rtnl_newlink+0x5f5/0x11b0 [ 83.251503] [ 83.251503] stack backtrace: [ 83.252173] CPU: 0 PID: 1008 Comm: gtp-link Not tainted 5.2.0-rc6+ #49 [ 83.253271] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 83.254562] Call Trace: [ 83.254995] dump_stack+0x7c/0xbb [ 83.255567] gtp_encap_enable_socket+0x2df/0x360 [gtp] [ 83.256415] ? gtp_find_dev+0x1a0/0x1a0 [gtp] [ 83.257161] ? memset+0x1f/0x40 [ 83.257843] gtp_newlink+0x90/0xa21 [gtp] [ 83.258497] ? __netlink_ns_capable+0xc3/0xf0 [ 83.259260] __rtnl_newlink+0xb9f/0x11b0 [ 83.260022] ? rtnl_link_unregister+0x230/0x230 [ ... ] Fixes: 1e3a3abd ("gtp: make GTP sockets in gtp_newlink optional") Signed-off-by:
-
csonsino authored
[ Upstream commit c49a8682 ] Problem: The Linux Bluetooth stack yields complete control over the BLE connection interval to the remote device. The Linux Bluetooth stack provides access to the BLE connection interval min and max values through /sys/kernel/debug/bluetooth/hci0/ conn_min_interval and /sys/kernel/debug/bluetooth/hci0/conn_max_interval. These values are used for initial BLE connections, but the remote device has the ability to request a connection parameter update. In the event that the remote side requests to change the connection interval, the Linux kernel currently only validates that the desired value is within the acceptable range in the Bluetooth specification (6 - 3200, corresponding to 7.5ms - 4000ms). There is currently no validation that the desired value requested by the remote device is within the min/max limits specified in the conn_min_interval/conn_max_interval configurations. This essentially leads to Linux yielding complete control over the connection interval to the remote device. The proposed patch adds a verification step to the connection parameter update mechanism, ensuring that the desired value is within the min/max bounds of the current connection. If the desired value is outside of the current connection min/max values, then the connection parameter update request is rejected and the negative response is returned to the remote device. Recall that the initial connection is established using the local conn_min_interval/conn_max_interval values, so this allows the Linux administrator to retain control over the BLE connection interval. The one downside that I see is that the current default Linux values for conn_min_interval and conn_max_interval typically correspond to 30ms and 50ms respectively. If this change were accepted, then it is feasible that some devices would no longer be able to negotiate to their desired connection interval values. This might be remedied by setting the default Linux conn_min_interval and conn_max_interval values to the widest supported range (6 - 3200 / 7.5ms - 4000ms). This could lead to the same behavior as the current implementation, where the remote device could request to change the connection interval value to any value that is permitted by the Bluetooth specification, and Linux would accept the desired value. Signed-off-by:
Carey Sonsino <csonsino@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit e30155fd ] If an invalid role is sent from user space, gtp_encap_enable() will fail. Then, it should call gtp_encap_disable_sock() but current code doesn't. It makes memory leak. Fixes: 91ed81f9 ("gtp: support SGSN-side tunnels") Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit dcae9052 ] This change is similar to commit a1616a5a ("Bluetooth: hidp: fix buffer overflow") but for the compat ioctl. We take a string from the user and forgot to ensure that it's NUL terminated. I have also changed the strncpy() in to strscpy() in hidp_setup_hid(). The difference is the strncpy() doesn't necessarily NUL terminate the destination string. Either change would fix the problem but it's nice to take a belt and suspenders approach and do both. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Matias Karhumaa authored
[ Upstream commit 28261da8 ] Because of both sides doing L2CAP disconnection at the same time, it was possible to receive L2CAP Disconnection Response with CID that was already freed. That caused problems if CID was already reused and L2CAP Connection Request with same CID was sent out. Before this patch kernel deleted channel context regardless of the state of the channel. Example where leftover Disconnection Response (frame #402) causes local device to delete L2CAP channel which was not yet connected. This in turn confuses remote device's stack because same CID is re-used without properly disconnecting. Btmon capture before patch: ** snip ** > ACL Data RX: Handle 43 flags 0x02 dlen 8 #394 [hci1] 10.748949 Channel: 65 len 4 [PSM 3 mode 0] {chan 2} RFCOMM: Disconnect (DISC) (0x43) Address: 0x03 cr 1 dlci 0x00 Control: 0x53 poll/final 1 Length: 0 FCS: 0xfd < ACL Data TX: Handle 43 flags 0x00 dlen 8 #395 [hci1] 10.749062 Channel: 65 len 4 [PSM 3 mode 0] {chan 2} RFCOMM: Unnumbered Ack (UA) (0x63) Address: 0x03 cr 1 dlci 0x00 Control: 0x73 poll/final 1 Length: 0 FCS: 0xd7 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #396 [hci1] 10.749073 L2CAP: Disconnection Request (0x06) ident 17 len 4 Destination CID: 65 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 #397 [hci1] 10.752391 Num handles: 1 Handle: 43 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #398 [hci1] 10.753394 Num handles: 1 Handle: 43 Count: 1 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #399 [hci1] 10.756499 L2CAP: Disconnection Request (0x06) ident 26 len 4 Destination CID: 65 Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #400 [hci1] 10.756548 L2CAP: Disconnection Response (0x07) ident 26 len 4 Destination CID: 65 Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #401 [hci1] 10.757459 L2CAP: Connection Request (0x02) ident 18 len 4 PSM: 1 (0x0001) Source CID: 65 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #402 [hci1] 10.759148 L2CAP: Disconnection Response (0x07) ident 17 len 4 Destination CID: 65 Source CID: 65 = bluetoothd: 00:1E:AB:4C:56:54: error updating services: Input/o.. 10.759447 > HCI Event: Number of Completed Packets (0x13) plen 5 #403 [hci1] 10.759386 Num handles: 1 Handle: 43 Count: 1 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #404 [hci1] 10.760397 L2CAP: Connection Request (0x02) ident 27 len 4 PSM: 3 (0x0003) Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 16 #405 [hci1] 10.760441 L2CAP: Connection Response (0x03) ident 27 len 8 Destination CID: 65 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 43 flags 0x00 dlen 27 #406 [hci1] 10.760449 L2CAP: Configure Request (0x04) ident 19 len 19 Destination CID: 65 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1013 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Basic (0x00) TX window size: 0 Max transmit: 0 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 0 > HCI Event: Number of Completed Packets (0x13) plen 5 #407 [hci1] 10.761399 Num handles: 1 Handle: 43 Count: 1 > ACL Data RX: Handle 43 flags 0x02 dlen 16 #408 [hci1] 10.762942 L2CAP: Connection Response (0x03) ident 18 len 8 Destination CID: 66 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) *snip* Similar case after the patch: *snip* > ACL Data RX: Handle 43 flags 0x02 dlen 8 #22702 [hci0] 1664.411056 Channel: 65 len 4 [PSM 3 mode 0] {chan 3} RFCOMM: Disconnect (DISC) (0x43) Address: 0x03 cr 1 dlci 0x00 Control: 0x53 poll/final 1 Length: 0 FCS: 0xfd < ACL Data TX: Handle 43 flags 0x00 dlen 8 #22703 [hci0] 1664.411136 Channel: 65 len 4 [PSM 3 mode 0] {chan 3} RFCOMM: Unnumbered Ack (UA) (0x63) Address: 0x03 cr 1 dlci 0x00 Control: 0x73 poll/final 1 Length: 0 FCS: 0xd7 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #22704 [hci0] 1664.411143 L2CAP: Disconnection Request (0x06) ident 11 len 4 Destination CID: 65 Source CID: 65 > HCI Event: Number of Completed Pac.. (0x13) plen 5 #22705 [hci0] 1664.414009 Num handles: 1 Handle: 43 Count: 1 > HCI Event: Number of Completed Pac.. (0x13) plen 5 #22706 [hci0] 1664.415007 Num handles: 1 Handle: 43 Count: 1 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #22707 [hci0] 1664.418674 L2CAP: Disconnection Request (0x06) ident 17 len 4 Destination CID: 65 Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #22708 [hci0] 1664.418762 L2CAP: Disconnection Response (0x07) ident 17 len 4 Destination CID: 65 Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #22709 [hci0] 1664.421073 L2CAP: Connection Request (0x02) ident 12 len 4 PSM: 1 (0x0001) Source CID: 65 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #22710 [hci0] 1664.421371 L2CAP: Disconnection Response (0x07) ident 11 len 4 Destination CID: 65 Source CID: 65 > HCI Event: Number of Completed Pac.. (0x13) plen 5 #22711 [hci0] 1664.424082 Num handles: 1 Handle: 43 Count: 1 > HCI Event: Number of Completed Pac.. (0x13) plen 5 #22712 [hci0] 1664.425040 Num handles: 1 Handle: 43 Count: 1 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #22713 [hci0] 1664.426103 L2CAP: Connection Request (0x02) ident 18 len 4 PSM: 3 (0x0003) Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 16 #22714 [hci0] 1664.426186 L2CAP: Connection Response (0x03) ident 18 len 8 Destination CID: 66 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 43 flags 0x00 dlen 27 #22715 [hci0] 1664.426196 L2CAP: Configure Request (0x04) ident 13 len 19 Destination CID: 65 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1013 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Basic (0x00) TX window size: 0 Max transmit: 0 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 0 > ACL Data RX: Handle 43 flags 0x02 dlen 16 #22716 [hci0] 1664.428804 L2CAP: Connection Response (0x03) ident 12 len 8 Destination CID: 66 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) *snip* Fix is to check that channel is in state BT_DISCONN before deleting the channel. This bug was found while fuzzing Bluez's OBEX implementation using Synopsys Defensics. Reported-by:
Matti Kamunen <matti.kamunen@synopsys.com> Reported-by:
Ari Timonen <ari.timonen@synopsys.com> Signed-off-by:
Matias Karhumaa <matias.karhumaa@gmail.com> Signed-off-by:
-
Seeteena Thoufeek authored
[ Upstream commit bff5a556 ] 'probe libc's inet_pton & backtrace it with ping' testcase sometimes fails on powerpc because distro ping binary does not have symbol information and thus it prints "[unknown]" function name in the backtrace. Accept "[unknown]" as valid function name for powerpc as well. # perf test -v "probe libc's inet_pton & backtrace it with ping" Before: 59: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 79695 ping 79718 [077] 96483.787025: probe_libc:inet_pton: (7fff83a754c8) 7fff83a754c8 __GI___inet_pton+0x8 (/usr/lib64/power9/libc-2.28.so) 7fff83a2b7a0 gaih_inet.constprop.7+0x1020 (/usr/lib64/power9/libc-2.28.so) 7fff83a2c170 getaddrinfo+0x160 (/usr/lib64/power9/libc-2.28.so) 1171830f4 [unknown] (/usr/bin/ping) FAIL: expected backtrace entry ".*\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$" got "1171830f4 [unknown] (/usr/bin/ping)" test child finished with -1 ---- end ---- probe libc's inet_pton & backtrace it with ping: FAILED! After: 59: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 79085 ping 79108 [045] 96400.214177: probe_libc:inet_pton: (7fffbb9654c8) 7fffbb9654c8 __GI___inet_pton+0x8 (/usr/lib64/power9/libc-2.28.so) 7fffbb91b7a0 gaih_inet.constprop.7+0x1020 (/usr/lib64/power9/libc-2.28.so) 7fffbb91c170 getaddrinfo+0x160 (/usr/lib64/power9/libc-2.28.so) 132e830f4 [unknown] (/usr/bin/ping) test child finished with 0 ---- end ---- probe libc's inet_pton & backtrace it with ping: Ok Signed-off-by:
Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com> Reviewed-by:
Kim Phillips <kim.phillips@amd.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan@linux.ibm.com> Fixes: 16329364 ("perf tests: Fix record+probe_libc_inet_pton.sh without ping's debuginfo") Link: http://lkml.kernel.org/r/1561630614-3216-1-git-send-email-s1seetee@linux.vnet.ibm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Shijith Thotton authored
[ Upstream commit c09cb129 ] The NMI handlers handle_percpu_devid_fasteoi_nmi() and handle_fasteoi_nmi() do not update the interrupt counts. Due to that the NMI interrupt count does not show up correctly in /proc/interrupts. Add the statistics and treat the NMI handlers in the same way as per cpu interrupts and prevent them from updating irq_desc::tot_count as this might be corrupted due to concurrency. [ tglx: Massaged changelog ] Fixes: 2dcf1fbc ("genirq: Provide NMI handlers") Signed-off-by:
Shijith Thotton <sthotton@marvell.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1562313336-11888-1-git-send-email-sthotton@marvell.comSigned-off-by:
-
Josua Mayer authored
[ Upstream commit b188b032 ] Handle overlooked case where the target address is assigned to a peer and neither route nor gateway exist. For one peer, no checks are performed to see if it is meant to receive packets for a given address. As soon as there is a second peer however, checks are performed to deal with routes and gateways for handling complex setups with multiple hops to a target address. This logic assumed that no route and no gateway imply that the destination address can not be reached, which is false in case of a direct peer. Acked-by:
Jukka Rissanen <jukka.rissanen@linux.intel.com> Tested-by:
Michael Scott <mike@foundries.io> Signed-off-by:
Josua Mayer <josua.mayer@jm0.eu> Signed-off-by:
-
João Paulo Rechi Vita authored
[ Upstream commit 881cec4f ] Without the QCA ROME setup routine this adapter fails to establish a SCO connection. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3501 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by:
-
João Paulo Rechi Vita authored
[ Upstream commit 44d34af2 ] Without the QCA ROME setup routine this adapter fails to establish a SCO connection. T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3491 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
-
Tomas Bortoli authored
[ Upstream commit 4ce9146e ] Syzkaller found that it is possible to provoke a memory leak by never freeing rx_skb in struct bcsp_struct. Fix by freeing in bcsp_close() Signed-off-by:
Tomas Bortoli <tomasbortoli@gmail.com> Reported-by: syzbot+98162c885993b72f19c4@syzkaller.appspotmail.com Signed-off-by:
-
Jian Shen authored
[ Upstream commit 2d5066fc ] For revision 0x20, the broadcast promisc is enabled by firmware, it's unnecessary to enable it when initializing VF. For revision 0x21, it's necessary to enable broadcast promisc mode when initializing or re-initializing VF, otherwise, it will be unable to send and receive promisc packets. Fixes: f01f5559 ("net: hns3: don't allow vf to enable promisc mode") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit aa52bcbe ] Michael reported crash with by bpf program in json mode on powerpc: # bpftool prog -p dump jited id 14 [{ "name": "0xd00000000a9aa760", "insns": [{ "pc": "0x0", "operation": "nop", "operands": [null ] },{ "pc": "0x4", "operation": "nop", "operands": [null ] },{ "pc": "0x8", "operation": "mflr", Segmentation fault (core dumped) The code is assuming char pointers in format, which is not always true at least for powerpc. Fixing this by dumping the whole string into buffer based on its format. Please note that libopcodes code does not check return values from fprintf callback, but as per Jakub suggestion returning -1 on allocation failure so we do the best effort to propagate the error. Fixes: 107f0412 ("tools: bpftool: add JSON output for `bpftool prog dump jited *` command") Reported-by:
Michael Petlan <mpetlan@redhat.com> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Wen Yang authored
[ Upstream commit 1bcc1fd6 ] After calling of_node_put() on the codec_ep and codec_port variables, they are still being used, which may result in use-after-free. We fix this issue by calling of_node_put() after the last usage. Fixes: fce9b90c ("ASoC: audio-graph-card: cleanup DAI link loop method - step2") Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/1562229530-8121-1-git-send-email-wen.yang99@zte.com.cnSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
