- 01 Jul, 2022 5 commits
-
-
Arnd Bergmann authored
Merge tag 'amlogic-arm-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes Amlogic ARM mach-meson changes for v5.20: - Fix refcount leak in meson_smp_prepare_cpus * tag 'amlogic-arm-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: ARM: meson: Fix refcount leak in meson_smp_prepare_cpus Link: https://lore.kernel.org/r/cbf6bcb5-c7be-40fe-4436-4578c9d6c532@baylibre.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'scmi-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm SCMI firmware driver fixes for v5.19 Few more fixes to address: 1. Issue reported on Juno with HDLCD clock which turned out to be yet another firmware issue. The firmware is not conformant to the spec and we now have to workaround as this may be copied to other platforms as well. The spec expects to return size of 3 for a range clock rate description while the firmware returns 1. We have other ways to validate all the 3 entries the driver reads are polpulated and we use the same to workaround this firmware bug. 2. Optee transport not setting the correct reponse length which is similar to the one reported earlier on Rockchip platform. 3. Drop the usage of the deprecated ida_simple_{get,remove} and migrate to the ida_{alloc,free} * tag 'scmi-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API firmware: arm_scmi: Fix response size warning for OPTEE transport firmware: arm_scmi: Relax CLOCK_DESCRIBE_RATES out-of-spec checks Link: https://lore.kernel.org/r/20220628133315.699803-1-sudeep.holla@arm.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'imx-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.19, round 2: - Fix the SDIO description for imx7d-smegw01 board to ensure there is no communication made at 1.8V. - Fix pgc_ispdwp power-domain clock, which should be IMX8MP_CLK_MEDIA_ISP_ROOT. - Re-enable framebuffer support in mxs_defconfig to fix a Kconfig regression. - A series from Peng Fan (and Sherry Sun) fixing various pads on i.MX8MP based boards to leave reserved bits untouched. * tag 'imx-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings arm64: dts: imx8mp-phyboard-pollux-rdk: correct uart pad settings arm64: dts: imx8mp-venice-gw74xx: correct pad settings arm64: dts: imx8mp-evk: correct I2C3 pad settings arm64: dts: imx8mp-evk: correct I2C1 pad settings arm64: dts: imx8mp-evk: correct I2C5 pad settings arm64: dts: imx8mp-evk: correct vbus pad settings arm64: dts: imx8mp-evk: correct eqos pad settings arm64: dts: imx8mp-evk: correct vbus pad settings arm64: dts: imx8mp-evk: correct gpio-led pad settings arm64: dts: imx8mp-evk: correct the uart2 pinctl value arm64: dts: imx8mp-evk: correct mmc pad settings ARM: mxs_defconfig: Enable the framebuffer arm64: dts: imx8mp: correct clock of pgc_ispdwp ARM: dts: imx7d-smegw01: Fix the SDIO description Link: https://lore.kernel.org/r/20220629021244.GL819983@dragonSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'at91-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes for 5.19 It contains 3 SoC fixes and 2 DT fixes: SoC: - fix the wakeup from RTC and RTT for ULP1 mode - fix section mismatch warning - fix SAM9X60 SiP detection DT: - fixes the EEPROMs compatibles for sama5d2_icp and sam9x60ek and EEPROM size for sam9x60ek * tag 'at91-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: pm: Mark at91_pm_secure_init as __init ARM: at91: fix soc detection for SAM9X60 SiPs ARM: dts: at91: sama5d2_icp: fix eeprom compatibles ARM: dts: at91: sam9x60ek: fix eeprom compatible and size ARM: at91: pm: use proper compatibles for sama7g5's rtc and rtt ARM: at91: pm: use proper compatibles for sam9x60's rtc and rtt ARM: at91: pm: use proper compatible for sama5d2's rtc Link: https://lore.kernel.org/r/20220628135130.3114878-1-claudiu.beznea@microchip.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Linus Walleij authored
The kernel test robot found this inconsistency: drivers/soc/ixp4xx/ixp4xx-npe.c:737:34: warning: 'ixp4xx_npe_of_match' defined but not used [-Wunused-const-variable=] 737 | static const struct of_device_id ixp4xx_npe_of_match[] = { This is because the match is enclosed in the of_match_ptr() which compiles into NULL when OF is disabled and this is unnecessary. Fix it by dropping of_match_ptr() around the match. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220626074315.61209-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
- 28 Jun, 2022 7 commits
-
-
Fabio Estevam authored
at91_pm_secure_init() is used inside sama5d2_pm_init(), which has the __init notation. Pass the __init notation to at91_pm_secure_init() as well to fix the following section mismatch warning: WARNING: modpost: vmlinux.o(.text.unlikely+0x2138): Section mismatch in reference from the function at91_pm_secure_init() to the (unknown reference) .init.rodata:(unknown) Fixes: f2f5cf78 ("ARM: at91: pm: add support for sama5d2 secure suspend") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220622114810.1186330-1-festevam@gmail.com
-
Mihai Sain authored
Fix SoC detection for SAM9X60 SiPs: SAM9X60D5M SAM9X60D1G SAM9X60D6K Fixes: af3a1051 ("drivers: soc: atmel: add per soc id and version match masks") Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220616081344.1978664-1-claudiu.beznea@microchip.com
-
Eugen Hristev authored
The eeprom memories on the board are microchip 24aa025e48, which are 2 Kbits and are compatible with at24c02 not at24c32. Fixes: 68a95ef7 ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220607090455.80433-2-eugen.hristev@microchip.com
-
Eugen Hristev authored
The board has a microchip 24aa025e48 eeprom, which is a 2 Kbits memory, so it's compatible with at24c02 not at24c32. Also the size property is wrong, it's not 128 bytes, but 256 bytes. Thus removing and leaving it to the default (256). Fixes: 1e5f532c ("ARM: dts: at91: sam9x60: add device tree for soc and board") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220607090455.80433-1-eugen.hristev@microchip.com
-
Claudiu Beznea authored
Use proper compatible strings for SAMA7G5's RTC and RTT IPs. These are necessary for configuring wakeup sources for ULP1 PM mode. Fixes: 6501330f ("ARM: at91: pm: add pm support for SAMA7G5") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220523092421.317345-4-claudiu.beznea@microchip.com
-
Claudiu Beznea authored
Use proper compatible strings for SAM9X60's RTC and RTT IPs. These are necessary for configuring wakeup sources for ULP1 PM mode. Fixes: eaedc0d3 ("ARM: at91: pm: add ULP1 support for SAM9X60") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220523092421.317345-3-claudiu.beznea@microchip.com
-
Claudiu Beznea authored
Use proper compatible strings for SAMA5D2's RTC IPs. This is necessary for configuring wakeup sources for ULP1 PM mode. Fixes: d7484f5c ("ARM: at91: pm: configure wakeup sources for ULP1 mode") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220523092421.317345-2-claudiu.beznea@microchip.com
-
- 27 Jun, 2022 18 commits
-
-
Bo Liu authored
Replace the deprecated ida_simple_{get,remove} with ida_{alloc,free}. Link: https://lore.kernel.org/r/20220616055052.4559-1-liubo03@inspur.comSigned-off-by: Bo Liu <liubo03@inspur.com> [sudeep.holla: Replace ida_alloc_min with ida_alloc as suggested by Cristian] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
-
Vincent Guittot authored
Some protocols check the response size with the expected value but optee shared memory doesn't return such size whereas it is available in the optee output buffer. As an example, the base protocol compares the response size with the expected result when requesting the list of protocol which triggers a warning with optee shared memory: arm-scmi firmware:scmi0: Malformed reply - real_sz:116 calc_sz:4 (loop_num_ret:4) Save the output buffer length and use it when fetching the answer. Link: https://lore.kernel.org/r/20220624074549.3298-1-vincent.guittot@linaro.orgReviewed-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
-
Peng Fan authored
BIT3 and BIT0 are reserved bits, should not touch. Fixes: aec8ad34 ("arm64: dts: imx8mp: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Peng Fan authored
BIT3 and BIT0 are reserved bits, should not touch. Fixes: 88f7f6bc ("arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Peng Fan authored
BIT3 and BIT0 are reserved bits, should not touch. Fixes: 6f968526 ("arm64: dts: freescale: Add support EQOS MAC on phyBOARD-Pollux-i.MX8MP") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Peng Fan authored
BIT3 and BIT0 are reserved bits, should not touch. Fixes: 846f7528 ("arm64: dts: imx8mp-phyboard-pollux-rdk: Change debug UART") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Peng Fan authored
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Should not set reserved bit. Fixes: 7899eb6c ("arm64: dts: imx: Add i.MX8M Plus Gateworks gw7400 dts support") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Peng Fan authored
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Although function is not broken, we should not set reserved bit. Fixes: 5e4a67ff ("arm64: dts: imx8mp-evk: Add i2c3 support") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Peng Fan authored
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Although function is not broken, we should not set reserved bit. Fixes: 5497bc2a ("arm64: dts: imx8mp-evk: Add PMIC device") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Peng Fan authored
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Although function is not broken, we should not set reserved bit. Fixes: 8134822d ("arm64: dts: imx8mp-evk: add support for I2C5") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Peng Fan authored
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Not set reserved bit. Fixes: 9e847693 ("arm64: dts: freescale: Add i.MX8MP EVK board support") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Peng Fan authored
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Although function is not broken, we should not set reserved bit. Fixes: dc6d5dc8 ("arm64: dts: imx8mp-evk: enable EQOS ethernet") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Peng Fan authored
0x19 is not a valid setting. According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Not set reserved bit. Fixes: 43da4f92 ("arm64: dts: imx8mp-evk: enable usb1 as host mode") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Peng Fan authored
0x19 is not a valid setting. According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Correct setting with PE PUE set, DSE set to 0. Fixes: 50d336b1 ("arm64: dts: imx8mp-evk: Add GPIO LED support") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Sherry Sun authored
According to the IOMUXC_SW_PAD_CTL_PAD_UART2_RXD/TXD register define in imx8mp RM, bit0 and bit3 are reserved, and the uart2 rx/tx pin should enable the pull up, so need to set bit8 to 1. The original pinctl value 0x49 is incorrect and needs to be changed to 0x140, same as uart1 and uart3. Fixes: 9e847693 ("arm64: dts: freescale: Add i.MX8MP EVK board support") Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Peng Fan authored
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Not set reserved bit. Fixes: 9e847693 ("arm64: dts: freescale: Add i.MX8MP EVK board support") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
Currently, when booting Linux on a imx28-evk board there is no display activity. Enable CONFIG_FB which is nowadays required for CONFIG_DRM_PANEL_LVDS, CONFIG_DRM_PANEL_SIMPLE, CONFIG_DRM_PANEL_SEIKO_43WVF1G, CONFIG_FB_MODE_HELPERS, CONFIG_BACKLIGHT_PWM, CONFIG_BACKLIGHT_GPIO, CONFIG_FRAMEBUFFER_CONSOLE, CONFIG_LOGO, CONFIG_FONTS, CONFIG_FONT_8x8 and CONFIG_FONT_8x16. Based on commit c5446748 ("ARM: imx_v6_v7_defconfig: enable fb"). Fixes: f611b1e7 ("drm: Avoid circular dependencies for CONFIG_FB") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Peng Fan authored
The deprecated DIV clk is previously part of the ISP composite clk, but there is still one child clk(IMX8MP_CLK_MEDIA_ISP_ROOT) sourcing from IMX8MP_CLK_MEDIA_ISP( previously IMX8MP_CLK_MEDIA_ISP_DIV) So IMX8MP_CLK_MEDIA_ISP_ROOT should be used, not IMX8MP_CLK_MEDIA_ISP_DIV. Fixes: 9d89189d ("arm64: dts: imx8mp: Add MEDIAMIX power domains") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 26 Jun, 2022 10 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "A number of fixes have accumulated, but they are largely for harmless issues: - Several OF node leak fixes - A fix to the Exynos7885 UART clock description - DTS fixes to prevent boot failures on TI AM64 and J721s2 - Bus probe error handling fixes for Baikal-T1 - A fixup to the way STM32 SoCs use separate dts files for different firmware stacks - Multiple code fixes for Arm SCMI firmware, all dealing with robustness of the implementation - Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT nodes - Three updates to the MAINTAINERS file, including Florian Fainelli taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz Julienne" * tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom arm: mach-spear: Add missing of_node_put() in time.c ARM: cns3xxx: Fix refcount leak in cns3xxx_init MAINTAINERS: Update email address arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region ARM: dts: bcm2711-rpi-400: Fix GPIO line names bus: bt1-axi: Don't print error on -EPROBE_DEFER bus: bt1-apb: Don't print error on -EPROBE_DEFER ARM: Fix refcount leak in axxia_boot_secondary ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15 soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity ARM: dts: imx6qdl: correct PU regulator ramp delay firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe MAINTAINERS: Update BCM2711/BCM2835 maintainer ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull hotfixes from Andrew Morton: "Minor things, mainly - mailmap updates, MAINTAINERS updates, etc. Fixes for this merge window: - fix for a damon boot hang, from SeongJae - fix for a kfence warning splat, from Jason Donenfeld - fix for zero-pfn pinning, from Alex Williamson - fix for fallocate hole punch clearing, from Mike Kravetz Fixes for previous releases: - fix for a performance regression, from Marcelo - fix for a hwpoisining BUG from zhenwei pi" * tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mailmap: add entry for Christian Marangi mm/memory-failure: disable unpoison once hw error happens hugetlbfs: zero partial pages during fallocate hole punch mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py mm: re-allow pinning of zero pfns mm/kfence: select random number before taking raw lock MAINTAINERS: add maillist information for LoongArch MAINTAINERS: update MM tree references MAINTAINERS: update Abel Vesa's email MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer MAINTAINERS: add Miaohe Lin as a memory-failure reviewer mailmap: add alias for jarkko@profian.com mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal mm: lru_cache_disable: use synchronize_rcu_expedited mm/page_isolation.c: fix one kernel-doc comment
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Enable ignore_missing_thread in 'perf stat', enabling counting with '--pid' when threads disappear during counting session setup - Adjust output data offset for backward compatibility in 'perf inject' - Fix missing free in copy_kcore_dir() in 'perf inject' - Fix caching files with a wrong build ID - Sync drm, cpufeatures, vhost and svn headers with the kernel * tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: tools headers UAPI: Synch KVM's svm.h header with the kernel tools include UAPI: Sync linux/vhost.h with the kernel sources perf stat: Enable ignore_missing_thread perf inject: Adjust output data offset for backward compatibility perf trace beauty: Fix generation of errno id->str table on ALT Linux perf build-id: Fix caching files with a wrong build ID tools headers cpufeatures: Sync with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources perf inject: Fix missing free in copy_kcore_dir()
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - zoned relocation fixes: - fix critical section end for extent writeback, this could lead to out of order write - prevent writing to previous data relocation block group if space gets low - reflink fixes: - fix race between reflinking and ordered extent completion - proper error handling when block reserve migration fails - add missing inode iversion/mtime/ctime updates on each iteration when replacing extents - fix deadlock when running fsync/fiemap/commit at the same time - fix false-positive KCSAN report regarding pid tracking for read locks and data race - minor documentation update and link to new site * tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Documentation: update btrfs list of features and link to readthedocs.io btrfs: fix deadlock with fsync+fiemap+transaction commit btrfs: don't set lock_owner when locking extent buffer for reading btrfs: zoned: fix critical section of relocation inode writeback btrfs: zoned: prevent allocation from previous data relocation BG btrfs: do not BUG_ON() on failure to migrate space when replacing extents btrfs: add missing inode updates on each iteration when replacing extents btrfs: fix race between reflinking and ordered extent completion
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fix from Christoph Hellwig: - pass the correct size to dma_set_encrypted() when freeing memory (Dexuan Cui) * tag 'dma-mapping-5.19-2022-06-26' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: use the correct size for dma_set_encrypted()
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdevLinus Torvalds authored
Pull fbdev fixes from Helge Deller: "Two bug fixes for the pxa3xx and intelfb drivers: - pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write - intelfb: Initialize value of stolen size The other changes are small cleanups, simplifications and documentation updates to the cirrusfb, skeletonfb, omapfb, intelfb, au1100fb and simplefb drivers" * tag 'for-5.19/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: video: fbdev: omap: Remove duplicate 'the' in comment video: fbdev: omapfb: Align '*' in comment video: fbdev: simplefb: Check before clk_put() not needed video: fbdev: au1100fb: Drop unnecessary NULL ptr check video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write video: fbdev: skeletonfb: Convert to generic power management video: fbdev: cirrusfb: Remove useless reference to PCI power management video: fbdev: intelfb: Initialize value of stolen size video: fbdev: intelfb: Use aperture size from pci_resource_len video: fbdev: skeletonfb: Fix syntax errors in comments
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc architecture fixes from Helge Deller: - enable ARCH_HAS_STRICT_MODULE_RWX to prevent a boot crash on c8000 machines - flush all mappings of a shared anonymous page on PA8800/8900 machines via flushing the whole data cache. This may slow down such machines but makes sure that the cache is consistent - Fix duplicate definition build error regarding fb_is_primary_device() * tag 'for-5.19/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Enable ARCH_HAS_STRICT_MODULE_RWX parisc: Fix flush_anon_page on PA8800/PA8900 parisc: align '*' in comment in math-emu code parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI
-
https://github.com/jcmvbkbc/linux-xtensaLinus Torvalds authored
Pull xtensa fixes from Max Filippov: - fix OF reference leaks in xtensa arch code - replace '.bss' with '.section .bss' to fix entry.S build with old assembler * tag 'xtensa-20220626' of https://github.com/jcmvbkbc/linux-xtensa: xtensa: change '.bss' to '.section .bss' xtensa: xtfpga: Fix refcount leak bug in setup xtensa: Fix refcount leak bug in time.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - A fix for a CMA change that broke booting guests with > 2G RAM on Power8 hosts. - Fix the RTAS call filter to allow a special case that applications rely on. - A change to our execve path, to make the execve syscall exit tracepoint work. - Three fixes to wire up our various RNGs earlier in boot so they're available for use in the initial seeding in random_init(). - A build fix for when KASAN is enabled along with STRUCTLEAK_BYREF_ALL. Thanks to Andrew Donnellan, Aneesh Kumar K.V, Christophe Leroy, Jason Donenfeld, Nathan Lynch, Naveen N. Rao, Sathvika Vasireddy, Sumit Dubey2, Tyrel Datwyler, and Zi Yan. * tag 'powerpc-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv: wire up rng during setup_arch powerpc/prom_init: Fix build failure with GCC_PLUGIN_STRUCTLEAK_BYREF_ALL and KASAN powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address powerpc: Enable execve syscall exit tracepoint powerpc/pseries: wire up rng during setup_arch() powerpc/microwatt: wire up rng during setup_arch() powerpc/mm: Move CMA reservations after initmem_init()
-