- 06 Jan, 2015 14 commits
-
-
Ronald Wahl authored
commit b2ba27a5 upstream. Commit 76280832 (usb: gadget: at91_udc: prepare clk before calling enable) added clock preparation in interrupt context. This is not allowed as it might sleep. Also setting the clock rate is unsafe to call from there for the same reason. Move clock preparation and setting clock rate into process context (at91udc_probe). Signed-off-by:
Ronald Wahl <ronald.wahl@raritan.com> Acked-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Martin Schwidefsky authored
commit e512d56c upstream. git commit 37f81fa1 "n_tty: do O_ONLCR translation as a single write" surfaced a bug in the 3215 device driver. In combination this broke tab expansion for tty ouput. The cause is an asymmetry in the behaviour of tty3215_ops->write vs tty3215_ops->put_char. The put_char function scans for '\t' but the write function does not. As the driver has logic for the '\t' expansion remove XTABS from c_oflag of the initial termios as well. Reported-by:
Stephen Powell <zlinuxman@wowway.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
commit 26d766c6 upstream. The ccw_device_start in raw3215_start_io can fail. raw3215_try_io does not check if the request could be started and removes any pending timer. This can leave the system in a hanging state. Check for pending request after raw3215_start_io and start a timer if necessary. Signed-off-by:
-
Kan Liang authored
commit 338b522c upstream. With -cpu host, KVM reports LBR and extra_regs support, if the host has support. When the guest perf driver tries to access LBR or extra_regs MSR, it #GPs all MSR accesses,since KVM doesn't handle LBR and extra_regs support. So check the related MSRs access right once at initialization time to avoid the error access at runtime. For reproducing the issue, please build the kernel with CONFIG_KVM_INTEL = y (for host kernel). And CONFIG_PARAVIRT = n and CONFIG_KVM_GUEST = n (for guest kernel). Start the guest with -cpu host. Run perf record with --branch-any or --branch-filter in guest to trigger LBR Run perf stat offcore events (E.g. LLC-loads/LLC-load-misses ...) in guest to trigger offcore_rsp #GP Signed-off-by:
Kan Liang <kan.liang@intel.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Mark Davies <junk@eslaf.co.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: Yan, Zheng <zheng.z.yan@intel.com> Link: http://lkml.kernel.org/r/1405365957-20202-1-git-send-email-kan.liang@intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Yan, Zheng authored
commit 00bd8edb upstream. send_mds_reconnect() may call discard_cap_releases() after all release messages have been dropped by cleanup_cap_releases() Signed-off-by:
Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by:
Sage Weil <sage@inktank.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 9772b54c ] To accomodate for enough headroom for tunnels, use MAX_HEADER instead of LL_MAX_HEADER. Robert reported that he has hit after roughly 40hrs of trinity an skb_under_panic() via SCTP output path (see reference). I couldn't reproduce it from here, but not using MAX_HEADER as elsewhere in other protocols might be one possible cause for this. In any case, it looks like accounting on chunks themself seems to look good as the skb already passed the SCTP output path and did not hit any skb_over_panic(). Given tunneling was enabled in his .config, the headroom would have been expanded by MAX_HEADER in this case. Reported-by:
Robert Święcki <robert@swiecki.net> Reference: https://lkml.org/lkml/2014/12/1/507 Fixes: 594ccc14 ("[SCTP] Replace incorrect use of dev_alloc_skb with alloc_skb in sctp_packet_transmit().") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 5f478b41 ] mvneta_tx() dereferences skb to get skb->len too late, as hardware might have completed the transmit and TX completion could have freed the skb from another cpu. Fixes: 71f6d1b3 ("net: mvneta: replace Tx timer with a real interrupt") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
willy tarreau authored
[ Upstream commit aebea2ba ] The mvneta driver sets the amount of Tx coalesce packets to 16 by default. Normally that does not cause any trouble since the driver uses a much larger Tx ring size (532 packets). But some sockets might run with very small buffers, much smaller than the equivalent of 16 packets. This is what ping is doing for example, by setting SNDBUF to 324 bytes rounded up to 2kB by the kernel. The problem is that there is no documented method to force a specific packet to emit an interrupt (eg: the last of the ring) nor is it possible to make the NIC emit an interrupt after a given delay. In this case, it causes trouble, because when ping sends packets over its raw socket, the few first packets leave the system, and the first 15 packets will be emitted without an IRQ being generated, so without the skbs being freed. And since the socket's buffer is small, there's no way to reach that amount of packets, and the ping ends up with "send: no buffer available" after sending 6 packets. Running with 3 instances of ping in parallel is enough to hide the problem, because with 6 packets per instance, that's 18 packets total, which is enough to grant a Tx interrupt before all are sent. The original driver in the LSP kernel worked around this design flaw by using a software timer to clean up the Tx descriptors. This timer was slow and caused terrible network performance on some Tx-bound workloads (such as routing) but was enough to make tools like ping work correctly. Instead here, we simply set the packet counts before interrupt to 1. This ensures that each packet sent will produce an interrupt. NAPI takes care of coalescing interrupts since the interrupt is disabled once generated. No measurable performance impact nor CPU usage were observed on small nor large packets, including when saturating the link on Tx, and this fixes tools like ping which rely on too small a send buffer. If one wants to increase this value for certain workloads where it is safe to do so, "ethtool -C $dev tx-frames" will override this default setting. This fix needs to be applied to stable kernels starting with 3.10. Tested-By:
Maggie Mae Roxas <maggie.mae.roxas@gmail.com> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Seth Forshee authored
[ Upstream commit 8d609725 ] These BUGs can be erroneously triggered by frags which refer to tail pages within a compound page. The data in these pages may overrun the hardware page while still being contained within the compound page, but since compound_order() evaluates to 0 for tail pages the assertion fails. The code already iterates through subsequent pages correctly in this scenario, so the BUGs are unnecessary and can be removed. Fixes: f36c3747 ("xen/netfront: handle compound page fragments on transmit") Cc: <stable@vger.kernel.org> # 3.7+ Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit e0ebde0e ] rtnl_link_get_net() holds a reference on the 'struct net', we need to release it in case of error. CC: Eric W. Biederman <ebiederm@xmission.com> Fixes: b51642f6 ("net: Enable a userns root rtnl calls that are safe for unprivilged users") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit 2d5c57d7 ] Some VF drivers use the upper byte of "param1" (the qp count field) in mlx4_qp_reserve_range() to pass flags which are used to optimize the range allocation. Under the current code, if any of these flags are set, the 32-bit count field yields a count greater than 2^24, which is out of range, and this VF fails. As these flags represent a "best-effort" allocation hint anyway, they may safely be ignored. Therefore, the PF driver may simply mask out the bits. Fixes: c82e9aa0 "mlx4_core: resource tracking for HCA resources used by guests" Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
[ Upstream commit a620a6bc ] If TX channels are set to 4 and RX channels are set to less than 4, using ethtool -L, the driver will try to initialize more RX channels than it has allocated, causing an oops. This fix only initializes the RX ring if it has been allocated. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by:
-
Marcelo Leitner authored
[ Upstream commit 00c83b01 ] Currently, when trying to reuse a socket, vxlan_sock_add will grab vn->sock_lock, locate a reusable socket, inc refcount and release vn->sock_lock. But vxlan_sock_release() will first decrement refcount, and then grab that lock. refcnt operations are atomic but as currently we have deferred works which hold vs->refcnt each, this might happen, leading to a use after free (specially after vxlan_igmp_leave): CPU 1 CPU 2 deferred work vxlan_sock_add ... ... spin_lock(&vn->sock_lock) vs = vxlan_find_sock(); vxlan_sock_release dec vs->refcnt, reaches 0 spin_lock(&vn->sock_lock) vxlan_sock_hold(vs), refcnt=1 spin_unlock(&vn->sock_lock) hlist_del_rcu(&vs->hlist); vxlan_notify_del_rx_port(vs) spin_unlock(&vn->sock_lock) So when we look for a reusable socket, we check if it wasn't freed already before reusing it. Signed-off-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Fixes: 7c47cedf ("vxlan: move IGMP join/leave to work queue") Signed-off-by:
-
Yuri Chislov authored
[ Upstream commit be6572fd ] When using GRE redirection in WCCP, it sets the wrong skb->protocol, that is, ETH_P_IP instead of ETH_P_IPV6 for the encapuslated traffic. Fixes: c12b395a ("gre: Support GRE over IPv6") Cc: Dmitry Kozlov <xeb@mail.ru> Signed-off-by:
Yuri Chislov <yuri.chislov@gmail.com> Tested-by:
-
- 06 Dec, 2014 26 commits
-
-
Jiri Slaby authored
-
Cong Wang authored
commit b6ed5498 upstream. batman tries to search dev->iflink to check if it's a batman interface, but ->iflink could be 0, which is not a valid ifindex. It should just avoid iflink == 0 case. Reported-by:
Jet Chen <jet.chen@intel.com> Tested-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 36074381 upstream. Instead of the arch specific quirk which we are deprecating and that drivers don't understand. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Jeff Layton authored
commit 8c3cac5e upstream. A leftover lock on the list is surely a sign of a problem of some sort, but it's not necessarily a reason to panic the box. Instead, just log a warning with some info about the lock, and then delete it like we would any other lock. In the event that the filesystem declares a ->lock f_op, we may end up leaking something, but that's generally preferable to an immediate panic. Acked-by:
J. Bruce Fields <bfields@fieldses.org> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Cc: Markus Blank-Burian <burian@muenster.de> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 91ed6fd2 upstream. Some radeon ASICs don't support all 64 address bits of MSIs despite advertising support for 64-bit MSIs in their configuration space. This breaks on systems such as IBM POWER7/8, where 64-bit MSIs can be assigned with some of the high address bits set. This makes use of the newly introduced "no_64bit_msi" flag in structure pci_dev to allow the MSI allocation code to fallback to 32-bit MSIs on those adapters. Adding Alex's review tag. Patch to the driver is identical to the reviewed one, I dropped the arch/powerpc hunk rewrote the subject and cset comment. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 28731d58 upstream. Value needs to be swapped on BE. Signed-off-by:
-
Maurizio Lombardi authored
commit 01a4cc4d upstream. In some cases, the fcoe_rx_list may contains multiple instances of the same skb (the so called "shared skbs"). the bnx2fc_l2_rcv thread is a loop that extracts a skb from the list, modifies (and destroys) its content and then proceed to the next one. The problem is that if the skb is shared, the remaining instances will be corrupted. The solution is to use skb_share_check() before adding the skb to the fcoe_rx_list. [ 6286.808725] ------------[ cut here ]------------ [ 6286.808729] WARNING: at include/scsi/fc_frame.h:173 bnx2fc_l2_rcv_thread+0x425/0x450 [bnx2fc]() [ 6286.808748] Modules linked in: bnx2x(-) mdio dm_service_time bnx2fc cnic uio fcoe libfcoe 8021q garp stp mrp libfc llc scsi_transport_fc scsi_tgt sg iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel e1000e ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper ptp cryptd hpilo serio_raw hpwdt lpc_ich pps_core ipmi_si pcspkr mfd_core ipmi_msghandler shpchp pcc_cpufreq mperf nfsd auth_rpcgss nfs_acl lockd sunrpc dm_multipath xfs libcrc32c ata_generic pata_acpi sd_mod crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit ata_piix drm_kms_helper ttm drm libata i2c_core hpsa dm_mirror dm_region_hash dm_log dm_mod [last unloaded: mdio] [ 6286.808750] CPU: 3 PID: 1304 Comm: bnx2fc_l2_threa Not tainted 3.10.0-121.el7.x86_64 #1 [ 6286.808750] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 6286.808752] 0000000000000000 000000000b36e715 ffff8800deba1e00 ffffffff815ec0ba [ 6286.808753] ffff8800deba1e38 ffffffff8105dee1 ffffffffa05618c0 ffff8801e4c81888 [ 6286.808754] ffffe8ffff663868 ffff8801f402b180 ffff8801f56bc000 ffff8800deba1e48 [ 6286.808754] Call Trace: [ 6286.808759] [<ffffffff815ec0ba>] dump_stack+0x19/0x1b [ 6286.808762] [<ffffffff8105dee1>] warn_slowpath_common+0x61/0x80 [ 6286.808763] [<ffffffff8105e00a>] warn_slowpath_null+0x1a/0x20 [ 6286.808765] [<ffffffffa054f415>] bnx2fc_l2_rcv_thread+0x425/0x450 [bnx2fc] [ 6286.808767] [<ffffffffa054eff0>] ? bnx2fc_disable+0x90/0x90 [bnx2fc] [ 6286.808769] [<ffffffff81085aef>] kthread+0xcf/0xe0 [ 6286.808770] [<ffffffff81085a20>] ? kthread_create_on_node+0x140/0x140 [ 6286.808772] [<ffffffff815fc76c>] ret_from_fork+0x7c/0xb0 [ 6286.808773] [<ffffffff81085a20>] ? kthread_create_on_node+0x140/0x140 [ 6286.808774] ---[ end trace c6cdb939184ccb4e ]--- Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Acked-by:
Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Jane Zhou authored
commit 91a0b603 upstream. ping_lookup() may return a wrong sock if sk_buff's and sock's protocols dont' match. For example, sk_buff's protocol is ETH_P_IPV6, but sock's sk_family is AF_INET, in that case, if sk->sk_bound_dev_if is zero, a wrong sock will be returned. the fix is to "continue" the searching, if no matching, return NULL. Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Signed-off-by:
Jane Zhou <a17711@motorola.com> Signed-off-by:
Yiwei Zhao <gbjc64@motorola.com> Signed-off-by:
-
Trond Myklebust authored
commit c6c15e1e upstream. The currect code for nfsd41_cb_get_slot() and nfsd4_cb_done() has no locking in order to guarantee atomicity, and so allows for races of the form. Task 1 Task 2 ====== ====== if (test_and_set_bit(0) != 0) { clear_bit(0) rpc_wake_up_next(queue) rpc_sleep_on(queue) return false; } This patch breaks the race condition by adding a retest of the bit after the call to rpc_sleep_on(). Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
commit 6d0ba043 upstream. Even when security labels are disabled we support at least the same attributes as v4.1. Signed-off-by:
-
Stanislaw Gruszka authored
commit cfd9167a upstream. RT2800 and newer hardware require padding between header and payload if header length is not multiple of 4. For historical reasons we also align payload to to 4 bytes boundary, but such alignment is not needed on modern H/W. Patch fixes skb_under_panic problems reported from time to time: https://bugzilla.kernel.org/show_bug.cgi?id=84911 https://bugzilla.kernel.org/show_bug.cgi?id=72471 http://marc.info/?l=linux-wireless&m=139108549530402&w=2 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1087591 Panic happened because we eat 4 bytes of skb headroom on each (re)transmission when sending frame without the payload and the header length not being multiple of 4 (i.e. QoS header has 26 bytes). On such case because paylad_aling=2 is bigger than header_align=0 we increase header_align by 4 bytes. To prevent that we could change the check to: if (payload_length && payload_align > header_align) header_align += 4; but not aligning payload at all is more effective and alignment is not really needed by H/W (that has been tested on OpenWrt project for few years now). Reported-and-tested-by:
Antti S. Lankila <alankila@bel.fi> Debugged-by:
Henrik Asp <solenskiner@gmail.com> Originally-From: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Thomas Körper authored
commit 5247a589 upstream. ikfree_skb() is Called in can_free_echo_skb(), which might be called from (TX Error) interrupt, which triggers the folloing warning: [ 1153.360705] ------------[ cut here ]------------ [ 1153.360715] WARNING: CPU: 0 PID: 31 at net/core/skbuff.c:563 skb_release_head_state+0xb9/0xd0() [ 1153.360772] Call Trace: [ 1153.360778] [<c167906f>] dump_stack+0x41/0x52 [ 1153.360782] [<c105bb7e>] warn_slowpath_common+0x7e/0xa0 [ 1153.360784] [<c158b909>] ? skb_release_head_state+0xb9/0xd0 [ 1153.360786] [<c158b909>] ? skb_release_head_state+0xb9/0xd0 [ 1153.360788] [<c105bc42>] warn_slowpath_null+0x22/0x30 [ 1153.360791] [<c158b909>] skb_release_head_state+0xb9/0xd0 [ 1153.360793] [<c158be90>] skb_release_all+0x10/0x30 [ 1153.360795] [<c158bf06>] kfree_skb+0x36/0x80 [ 1153.360799] [<f8486938>] ? can_free_echo_skb+0x28/0x40 [can_dev] [ 1153.360802] [<f8486938>] can_free_echo_skb+0x28/0x40 [can_dev] [ 1153.360805] [<f849a12c>] esd_pci402_interrupt+0x34c/0x57a [esd402] [ 1153.360809] [<c10a75b5>] handle_irq_event_percpu+0x35/0x180 [ 1153.360811] [<c10a7623>] ? handle_irq_event_percpu+0xa3/0x180 [ 1153.360813] [<c10a7731>] handle_irq_event+0x31/0x50 [ 1153.360816] [<c10a9c7f>] handle_fasteoi_irq+0x6f/0x120 [ 1153.360818] [<c10a9c10>] ? handle_edge_irq+0x110/0x110 [ 1153.360822] [<c1011b61>] handle_irq+0x71/0x90 [ 1153.360823] <IRQ> [<c168152c>] do_IRQ+0x3c/0xd0 [ 1153.360829] [<c1680b6c>] common_interrupt+0x2c/0x34 [ 1153.360834] [<c107d277>] ? finish_task_switch+0x47/0xf0 [ 1153.360836] [<c167c27b>] __schedule+0x35b/0x7e0 [ 1153.360839] [<c10a5334>] ? console_unlock+0x2c4/0x4d0 [ 1153.360842] [<c13df500>] ? n_tty_receive_buf_common+0x890/0x890 [ 1153.360845] [<c10707b6>] ? process_one_work+0x196/0x370 [ 1153.360847] [<c167c723>] schedule+0x23/0x60 [ 1153.360849] [<c1070de1>] worker_thread+0x161/0x460 [ 1153.360852] [<c1090fcf>] ? __wake_up_locked+0x1f/0x30 [ 1153.360854] [<c1070c80>] ? rescuer_thread+0x2f0/0x2f0 [ 1153.360856] [<c1074f01>] kthread+0xa1/0xc0 [ 1153.360859] [<c1680401>] ret_from_kernel_thread+0x21/0x30 [ 1153.360861] [<c1074e60>] ? kthread_create_on_node+0x110/0x110 [ 1153.360863] ---[ end trace 5ff83639cbb74b35 ]--- This patch replaces the kfree_skb() by dev_kfree_skb_any(). Signed-off-by:
Thomas Körper <thomas.koerper@esd.eu> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Christian Sünkenberg authored
commit 18990455 upstream. Intel Multi-Flex LUNs choke on REPORT SUPPORTED OPERATION CODES resulting in sd_mod hanging for several minutes on startup. The issue was introduced with WRITE SAME discovery heuristics. Fixes: 5db44863 ("[SCSI] sd: Implement support for WRITE SAME") Signed-off-by:
Christian Sünkenberg <christian.suenkenberg@hfg-karlsruhe.de> Signed-off-by:
-
Nicholas Bellinger authored
commit ab8edab1 upstream. This patch addresses a bug where individual vhost-scsi configfs endpoint groups can be removed from below while active exports to QEMU userspace still exist, resulting in an OOPs. It adds a configfs_depend_item() in vhost_scsi_set_endpoint() to obtain an explicit dependency on se_tpg->tpg_group in order to prevent individual vhost-scsi WWPN endpoints from being released via normal configfs methods while an QEMU ioctl reference still exists. Also, add matching configfs_undepend_item() in vhost_scsi_clear_endpoint() to release the dependency, once QEMU's reference to the individual group at /sys/kernel/config/target/vhost/$WWPN/$TPGT is released. (Fix up vhost_scsi_clear_endpoint() error path - DanC) Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Thor Thayer authored
commit 0a8727e6 upstream. An IOCTL call that calls spi_setup() and then dw_spi_setup() will overwrite the persisted last transfer speed. On each transfer, the SPI speed is compared to the last transfer speed to determine if the clock divider registers need to be updated (did the speed change?). This bug was observed with the spidev driver using spi-config to update the max transfer speed. This fix: Don't overwrite the persisted last transaction clock speed when updating the SPI parameters in dw_spi_setup(). On the next transaction, the new speed won't match the persisted last speed and the hardware registers will be updated. On initialization, the persisted last transaction clock speed will be 0 but will be updated after the first SPI transaction. Move zeroed clock divider check into clock change test because chip->clk_div is zero on startup and would cause a divide-by-zero error. The calculation was wrong as well (can't support odd #). Reported-by:
Vlastimil Setka <setka@vsis.cz> Signed-off-by:
Thor Thayer <tthayer@opensource.altera.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Sagi Grimberg authored
commit 3b726ae2 upstream. In this case the cm_id->context is the isert_np, and the cm_id->qp is NULL, so use that to distinct the cases. Since we don't expect any other events on this cm_id we can just return -1 for explicit termination of the cm_id by the cma layer. Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
Roland Dreier authored
commit 885e7b0e upstream. If an initiator sends a zero-length command (e.g. TEST UNIT READY) but sets the transfer direction in the transport layer to indicate a data-out phase, we still shouldn't try to transfer data. At best it's a NOP, and depending on the transport, we might crash on an uninitialized sg list. Reported-by:
Craig Watson <craig.watson@vanguard-rugged.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Bart Van Assche authored
commit ab477c1f upstream. It is not guaranteed to that srp_sq_size is supported by the HCA. So if we failed to create the QP with ENOMEM, try with a smaller srp_sq_size. Keep it up until we hit MIN_SRPT_SQ_SIZE, then fail the connection. Reported-by:
Mark Lehrer <lehrer@gmail.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Greg Kroah-Hartman authored
commit a1f9a407 upstream. The xpad wireless endpoint is not a bulk endpoint on my devices, but rather an interrupt one, so the USB core complains when it is submitted. I'm guessing that the author really did mean that this should be an interrupt urb, but as there are a zillion different xpad devices out there, let's cover out bases and handle both bulk and interrupt endpoints just as easily. Signed-off-by:
"Pierre-Loup A. Griffais" <pgriffais@valvesoftware.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Ben Sagal authored
commit bce4f9e7 upstream. The LEN2006 Synaptics touchpad (as found in Thinkpad E540) returns wrong min max values. touchpad-edge-detector output: > Touchpad SynPS/2 Synaptics TouchPad on /dev/input/event6 > Move one finger around the touchpad to detect the actual edges > Kernel says: x [1472..5674], y [1408..4684] > Touchpad sends: x [1264..5675], y [1171..4688] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88211Signed-off-by:
Binyamin Sagal <bensagal@gmail.com> Signed-off-by:
-
Vladimir Murzin authored
commit 3f4aa45c upstream. We cannot restart cacheflush safely if a process provides user-defined signal handler and signal is pending. In this case -EINTR is returned and it is expected that process re-invokes syscall. However, there are a few problems with that: * looks like nobody bothers checking return value from cacheflush * but if it did, we don't provide the restart address for that, so the process has to use the same range again * ...and again, what might lead to looping forever So, remove cacheflush restarting code and terminate cache flushing as early as fatal signal is pending. Reported-by:
Chanho Min <chanho.min@lge.com> Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Thomas Petazzoni authored
commit 995ab518 upstream. Under extremely rare conditions, in an MPCore node consisting of at least 3 CPUs, two CPUs trying to perform a STREX to data on the same shared cache line can enter a livelock situation. This patch enables the HW mechanism that overcomes the bug. This fixes the incorrect setup of the STREX backoff delay bit due to a wrong description in the specification. Note that enabling the STREX backoff delay mechanism is done by leaving the bit *cleared*, while the bit was currently being set by the proc-v7.S code. [Thomas: adapt to latest mainline, slightly reword the commit log, add stable markers.] Fixes: de490193 ("arm: mm: Add support for PJ4B cpu and init routines") Signed-off-by:
Nadav Haklai <nadavh@marvell.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Dmitry Eremin-Solenikov authored
commit ef59a20b upstream. According to the manuals I have, XScale auxiliary register should be reached with opc_2 = 1 instead of crn = 1. cpu_xscale_proc_init correctly uses c1, c0, 1 arguments, but cpu_xscale_do_suspend and cpu_xscale_do_resume use c1, c1, 0. Correct suspend/resume functions to also use c1, c0, 1. The issue was primarily noticed thanks to qemu reporing "unsupported instruction" on the pxa suspend path. Confirmed in PXA210/250 and PXA255 XScale Core manuals and in PXA270 and PXA320 Developers Guides. Harware tested by me on tosa (pxa255). Robert confirmed on pxa270 board. Tested-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by:
-
Gu Zheng authored
commit 835f252c upstream. https://bugzilla.kernel.org/show_bug.cgi?id=86831 Markus reported that when shutting down mysqld (with AIO support, on a ext3 formatted Harddrive) leads to a negative number of dirty pages (underrun to the counter). The negative number results in a drastic reduction of the write performance because the page cache is not used, because the kernel thinks it is still 2 ^ 32 dirty pages open. Add a warn trace in __dec_zone_state will catch this easily: static inline void __dec_zone_state(struct zone *zone, enum zone_stat_item item) { atomic_long_dec(&zone->vm_stat[item]); + WARN_ON_ONCE(item == NR_FILE_DIRTY && atomic_long_read(&zone->vm_stat[item]) < 0); atomic_long_dec(&vm_stat[item]); } [ 21.341632] ------------[ cut here ]------------ [ 21.346294] WARNING: CPU: 0 PID: 309 at include/linux/vmstat.h:242 cancel_dirty_page+0x164/0x224() [ 21.355296] Modules linked in: wutbox_cp sata_mv [ 21.359968] CPU: 0 PID: 309 Comm: kworker/0:1 Not tainted 3.14.21-WuT #80 [ 21.366793] Workqueue: events free_ioctx [ 21.370760] [<c0016a64>] (unwind_backtrace) from [<c0012f88>] (show_stack+0x20/0x24) [ 21.378562] [<c0012f88>] (show_stack) from [<c03f8ccc>] (dump_stack+0x24/0x28) [ 21.385840] [<c03f8ccc>] (dump_stack) from [<c0023ae4>] (warn_slowpath_common+0x84/0x9c) [ 21.393976] [<c0023ae4>] (warn_slowpath_common) from [<c0023bb8>] (warn_slowpath_null+0x2c/0x34) [ 21.402800] [<c0023bb8>] (warn_slowpath_null) from [<c00c0688>] (cancel_dirty_page+0x164/0x224) [ 21.411524] [<c00c0688>] (cancel_dirty_page) from [<c00c080c>] (truncate_inode_page+0x8c/0x158) [ 21.420272] [<c00c080c>] (truncate_inode_page) from [<c00c0a94>] (truncate_inode_pages_range+0x11c/0x53c) [ 21.429890] [<c00c0a94>] (truncate_inode_pages_range) from [<c00c0f6c>] (truncate_pagecache+0x88/0xac) [ 21.439252] [<c00c0f6c>] (truncate_pagecache) from [<c00c0fec>] (truncate_setsize+0x5c/0x74) [ 21.447731] [<c00c0fec>] (truncate_setsize) from [<c013b3a8>] (put_aio_ring_file.isra.14+0x34/0x90) [ 21.456826] [<c013b3a8>] (put_aio_ring_file.isra.14) from [<c013b424>] (aio_free_ring+0x20/0xcc) [ 21.465660] [<c013b424>] (aio_free_ring) from [<c013b4f4>] (free_ioctx+0x24/0x44) [ 21.473190] [<c013b4f4>] (free_ioctx) from [<c003d8d8>] (process_one_work+0x134/0x47c) [ 21.481132] [<c003d8d8>] (process_one_work) from [<c003e988>] (worker_thread+0x130/0x414) [ 21.489350] [<c003e988>] (worker_thread) from [<c00448ac>] (kthread+0xd4/0xec) [ 21.496621] [<c00448ac>] (kthread) from [<c000ec18>] (ret_from_fork+0x14/0x20) [ 21.503884] ---[ end trace 79c4bf42c038c9a1 ]--- The cause is that we set the aio ring file pages as *DIRTY* via SetPageDirty (bypasses the VFS dirty pages increment) when init, and aio fs uses *default_backing_dev_info* as the backing dev, which does not disable the dirty pages accounting capability. So truncating aio ring file will contribute to accounting dirty pages (VFS dirty pages decrement), then error occurs. The original goal is keeping these pages in memory (can not be reclaimed or swapped) in life-time via marking it dirty. But thinking more, we have already pinned pages via elevating the page's refcount, which can already achieve the goal, so the SetPageDirty seems unnecessary. In order to fix the issue, using the __set_page_dirty_no_writeback instead of the nop .set_page_dirty, and dropped the SetPageDirty (don't manually set the dirty flags, don't disable set_page_dirty(), rely on default behaviour). With the above change, the dirty pages accounting can work well. But as we known, aio fs is an anonymous one, which should never cause any real write-back, we can ignore the dirty pages (write back) accounting by disabling the dirty pages (write back) accounting capability. So we introduce an aio private backing dev info (disabled the ACCT_DIRTY/WRITEBACK/ACCT_WB capabilities) to replace the default one. Reported-by:
Markus Königshaus <m.koenigshaus@wut.de> Signed-off-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Benjamin LaHaise <bcrl@kvack.org> Signed-off-by:
-
Jurgen Kramer authored
commit 6e84a8d7 upstream. This patch adds a USB control message delay quirk for a few specific Marantz/Denon devices. Without the delay the DACs will not work properly and produces the following type of messages: Nov 15 10:09:21 orwell kernel: [ 91.342880] usb 3-13: clock source 41 is not valid, cannot use Nov 15 10:09:21 orwell kernel: [ 91.343775] usb 3-13: clock source 41 is not valid, cannot use There are likely other Marantz/Denon devices using the same USB module which exhibit the same problems. But as this cannot be verified I limited the patch to the devices I could test. The following two devices are covered by this path: - Marantz SA-14S1 - Marantz HD-DAC1 Signed-off-by:
Jurgen Kramer <gtmkramer@xs4all.nl> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Alexey Khoroshilov authored
commit efbd50d2 upstream. It seems struct esd_usb2 dev is not deallocated on disconnect. The patch adds the missing deallocation. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by:
Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by:
-
