- 27 Feb, 2023 8 commits
-
-
Harry Wentland authored
This is useful to understand the bpc defaults and support of a driver. Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Cc: Pekka Paalanen <ppaalanen@gmail.com> Cc: Sebastian Wick <sebastian.wick@redhat.com> Cc: Vitaly.Prosyak@amd.com Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Joshua Ashton <joshua@froggi.es> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Reviewed-By:
Joshua Ashton <joshua@froggi.es> Link: https://patchwork.freedesktop.org/patch/msgid/20230113162428.33874-3-harry.wentland@amd.com
-
Harry Wentland authored
The EDID of an HDR display defines EOTFs that are supported by the display and can be set in the HDR metadata infoframe. Userspace is expected to read the EDID and set an appropriate HDR_OUTPUT_METADATA. In drm_parse_hdr_metadata_block the kernel reads the supported EOTFs from the EDID and stores them in the drm_connector->hdr_sink_metadata. While doing so it also filters the EOTFs to the EOTFs the kernel knows about. When an HDR_OUTPUT_METADATA is set it then checks to make sure the EOTF is a supported EOTF. In cases where the kernel doesn't know about a new EOTF this check will fail, even if the EDID advertises support. Since it is expected that userspace reads the EDID to understand what the display supports it doesn't make sense for DRM to block an HDR_OUTPUT_METADATA if it contains an EOTF the kernel doesn't understand. This comes with the added benefit of future-proofing metadata support. If the spec defines a new EOTF there is no need to update DRM and an compositor can immediately make use of it. Bug: https://gitlab.freedesktop.org/wayland/weston/-/issues/609 v2: Distinguish EOTFs defind in kernel and ones defined in EDID in the commit description (Pekka) v3: Rebase; drm_hdmi_infoframe_set_hdr_metadata moved to drm_hdmi_helper.c Signed-off-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Reviewed-By:
-
Dom Cobley authored
Currently we schedule a call to output_poll_execute from drm_kms_helper_poll_enable for 10s in future. Later we try to replace that in drm_helper_probe_single_connector_modes with a 0s schedule with delayed_event set. But as there is already a job in the queue this fails, and the immediate job we wanted with delayed_event set doesn't occur until 10s later. And that call acts as if connector state has changed, reprobing modes. This has a side effect of waking up a display that has been blanked. Make sure we cancel the old job before submitting the immediate one. Fixes: 162b6a57 ("drm/probe-helper: don't lose hotplug event") Acked-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Dom Cobley <popcornmix@gmail.com> [Maxime: Switched to mod_delayed_work] Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230127154052.452524-1-maxime@cerno.tech
-
Dmitry Osipenko authored
Replace all drm-shmem locks with a GEM reservation lock. This makes locks consistent with dma-buf locking convention where importers are responsible for holding reservation lock for all operations performed over dma-bufs, preventing deadlock between dma-buf importers and exporters. Suggested-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/all/20230108210445.3948344-8-dmitry.osipenko@collabora.com/
-
Dmitry Osipenko authored
DMA-buf core has its own refcounting of vmaps, use it instead of drm-shmem counting. This change prepares drm-shmem for addition of memory shrinker support where drm-shmem will use a single dma-buf reservation lock for all operations performed over dma-bufs. Reviewed-by:
-
Dmitry Osipenko authored
Ease debugging of a multi-GPU system by using drm_WARN_*() and drm_dbg_kms() helpers that print out DRM device name corresponding to shmem GEM. Reviewed-by:
-
Dmitry Osipenko authored
Group all 1-bit boolean members of struct drm_gem_shmem_object in the end of the structure, allowing compiler to pack data better and making code to look more consistent. Reviewed-by:
-
Dmitry Osipenko authored
Add new common evict() callback to drm_gem_object_funcs and corresponding drm_gem_object_evict() helper. This is a first step on a way to providing common GEM-shrinker API for DRM drivers. Reviewed-by:
-
- 26 Feb, 2023 6 commits
-
-
Xu Panda authored
The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL terminated strings. Signed-off-by:
Xu Panda <xu.panda@zte.com.cn> Signed-off-by:
Yang Yang <yang.yang29@zte.com> Signed-off-by:
-
Jani Nikula authored
Currently we only parse the Tiled Display Topology Data Block for DisplayID structure version 1.2, but not 2.0. The contents seem to be the same for both, so expand the parsing to structure version 2.0. Note that DisplayID spec version is not the same as DisplayID structure version; DisplayID 1.3 uses structure version 1.2, and DisplayID 2.0-2.1 use structure version 2.0. Lovely. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Jani Nikula authored
Use the DisplayID 2.0 primary use case information to deduce whether this is a head-mounted display, and should not be used for desktop. Cc: Iaroslav Boliukin <iam@lach.pw> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by:
-
Jani Nikula authored
The DisplayID structure version and primary use case are stored in the DisplayID Base Section. We should be checking them in a number of places when parsing the DisplayID blocks. Currently, we completely ignore the primary use case, and just look at the block tags without cross-checking against structure version. Store the version and primary use case in the DisplayID iterator, and provide accessors to them. In general, the information is needed when iterating the blocks, and this is a convenient place to both store and retrieve the information during parsing. Promote using accessors rather than users poking at the iterator directly. Cc: Iaroslav Boliukin <iam@lach.pw> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by:
-
Jani Nikula authored
Avoid figuring out the header pointer multiple times. Cc: Iaroslav Boliukin <iam@lach.pw> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by:
-
Jani Nikula authored
Add a helper to get a pointer to struct displayid_header. To be pedantic, add buffer overflow checks to not touch the base if that itself would overflow. Cc: Iaroslav Boliukin <iam@lach.pw> Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by:
-
- 24 Feb, 2023 3 commits
-
-
Maíra Canal authored
As v3d_job_add_deps() performs the same steps as drm_sched_job_add_syncobj_dependency(), replace the open-coded implementation in v3d in order to simply use the DRM function. Signed-off-by:
Maíra Canal <mcanal@igalia.com> Reviewed-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230209124447.467867-6-mcanal@igalia.com
-
Maíra Canal authored
As panfrost_copy_in_sync() performs the same steps as drm_sched_job_add_syncobj_dependency(), replace the open-coded implementation in Panfrost in order to simply use the DRM function. Reviewed-by:
Alyssa Rosenzweig <alyssa@collabora.com> Signed-off-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Maíra Canal authored
In order to add a syncobj's fence as a dependency to a job, it is necessary to call drm_syncobj_find_fence() to find the fence and then add the dependency with drm_sched_job_add_dependency(). So, wrap these steps in one single function, drm_sched_job_add_syncobj_dependency(). Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Luben Tuikov <luben.tuikov@amd.com> Signed-off-by:
-
- 23 Feb, 2023 3 commits
-
-
Matthew Auld authored
The ttm bo now initially has NULL bo->resource, and leaves the driver the handle that. However it looks like we forgot to handle that for radeon. It looks like this will just null-ptr-deref in radeon_bo_move(), if bo->resource is NULL. Fix this by calling move_null(). Fixes: 18025378 ("drm/ttm: stop allocating dummy resources during BO creation") Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230208145319.397235-4-matthew.auld@intel.comReviewed-by:
-
Matthew Auld authored
The ttm bo now initially has NULL bo->resource, and leaves the driver the handle that. However it looks like we forgot to handle that for qxl. It looks like this will just null-ptr-deref in qxl_bo_move(), if bo->resource is NULL. Fix this by calling move_null() if the new resource is TTM_PL_SYSTEM, otherwise do the multi-hop sequence to ensure can safely call into ttm_bo_move_memcpy(), since it might also need to clear the memory. This should give the same behaviour as before. Fixes: 18025378 ("drm/ttm: stop allocating dummy resources during BO creation") Signed-off-by:
-
Matthew Auld authored
The ttm BO now initially has NULL bo->resource, and leaves the driver the handle that. However it looks like we forgot to handle that for ttm_bo_move_memcpy() users, like with vram-gem, since it just silently returns zero. This seems to then trigger warnings like: WARNING: CPU: 0 PID: 1 at drivers/gpu/drm/drm_gem_vram_helper.c:255 drm_gem_vram_offset (??:?) Fix this by calling move_null() if the new resource is TTM_PL_SYSTEM, otherwise do the multi-hop sequence to ensure can safely call into ttm_bo_move_memcpy(), since it might also need to clear the memory. This should give the same behaviour as before. While we are here let's also treat calling ttm_bo_move_memcpy() with NULL bo->resource as programmer error, where expectation is that upper layers should now handle it. Fixes: 18025378 ("drm/ttm: stop allocating dummy resources during BO creation") Signed-off-by:
-
- 21 Feb, 2023 1 commit
-
-
Jiri Slaby (SUSE) authored
gcc-13 warns about mismatching types for enums. That revealed switched arguments of nv50_wndw_new_(): drivers/gpu/drm/nouveau/dispnv50/wndw.c:696:1: error: conflicting types for 'nv50_wndw_new_' due to enum/integer mismatch; have 'int(const struct nv50_wndw_func *, struct drm_device *, enum drm_plane_type, const char *, int, const u32 *, u32, enum nv50_disp_interlock_type, u32, struct nv50_wndw **)' drivers/gpu/drm/nouveau/dispnv50/wndw.h:36:5: note: previous declaration of 'nv50_wndw_new_' with type 'int(const struct nv50_wndw_func *, struct drm_device *, enum drm_plane_type, const char *, int, const u32 *, enum nv50_disp_interlock_type, u32, u32, struct nv50_wndw **)' It can be barely visible, but the declaration says about the parameters in the middle: enum nv50_disp_interlock_type, u32 interlock_data, u32 heads, While the definition states differently: u32 heads, enum nv50_disp_interlock_type interlock_type, u32 interlock_data, Unify/fix the declaration to match the definition. Fixes: 53e0a3e7 ("drm/nouveau/kms/nv50-: simplify tracking of channel interlocks") Cc: Martin Liska <mliska@suse.cz> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Jiri Slaby (SUSE) <jirislaby@kernel.org> Signed-off-by:
Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221031114229.10289-1-jirislaby@kernel.org
-
- 20 Feb, 2023 19 commits
-
-
Thomas Zimmermann authored
Enable the primary plane for tidss hardware via atomic_enable. Atomic helpers invoke this callback only when the plane becomes active. Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230209154107.30680-7-tzimmermann@suse.de
-
Thomas Zimmermann authored
Calls to dispc_plane_setup() and dispc_plane_enable() cannot fail. Remove the return value. Signed-off-by:
-
Thomas Zimmermann authored
Enable the primary plane for mgag200 hardware via atomic_enable. Atomic helpers invoke this callback only when the plane becomes active. Signed-off-by:
-
Thomas Zimmermann authored
The primary plane has the atomic_disable helper set, so atomic_update won't be called if the plane gets disabled. Remove the respective branch from the helper. Signed-off-by:
-
Thomas Zimmermann authored
Enable the primary plane for ast hardware via atomic_enable. Atomic helpers invoke this callback only when the plane becomes active. Signed-off-by:
-
Thomas Zimmermann authored
Add atomic_enable to struct drm_plane_helper_funcs. It enables a plane independently from updating the plane's content. As such, it is the inverse of the atomic_disable plane helper. Useful for hardware where plane enable state is independent from plane content. Signed-off-by:
-
Thomas Zimmermann authored
Do not claim that there's a default mode in the video= option parser. if no option string has been given, the parser does nothing. Signed-off-by:
-
Thomas Zimmermann authored
Include <video/cmdline.h> in drm_connector.c to get video_get_options() and avoid the dependency on <linux/fb.h>. The replaced function fb_get_options() is just a tiny wrapper around video_get_opions(). No functional changes. Include <linux/property.h> to get fwnode_handle_put(), which had been provided via <linux/fb.h>. Signed-off-by:
-
Thomas Zimmermann authored
Include <video/cmdline.h> in ps3av.c to get video_get_options() and avoid the dependency on <linux/fb.h>. The replaced function fb_get_options() is just a tiny wrapper around video_get_opions(). No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Handle the command-line parameter video= in video/cmdline.c. Implement the fbdev helper fb_get_options() on top. Will allows to handle the kernel parameter in DRM without fbdev dependencies. Note that __video_get_options() has the meaning of its return value inverted compared to fb_get_options(). The new helper returns true if the adapter has been enabled, and false otherwise. There is the ofonly parameter, which disables output for non-OF-based framebuffers. It is only for offb and looks like a workaround. The actual purpose it not clear to me. Use 'video=off' or 'nomodeset' instead. Signed-off-by:
-
Thomas Zimmermann authored
Move the lookup of the option string into an internal helper. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
There are no external users of fb_mode_option. Unexport the variable and declare it static. Signed-off-by:
-
Thomas Zimmermann authored
Get the kernel's global video= parameter with fb_get_option(). Done to unexport the internal fbdev state fb_mode_config. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Get the kernel's global video= parameter with fb_get_option(). Done to unexport the internal fbdev state fb_mode_config. No functional changes. Signed-off-by:
Geoff Levand <geoff@infradead.org> Reviewed-by:
-
Thomas Zimmermann authored
Ignore the per-driver video options if no driver name has been specified to fb_get_option(). Return the global options in this case. Signed-off-by:
-
Thomas Zimmermann authored
In fb_get_options(), always duplicate the returned option string and transfer ownership of the memory to the function's caller. Until now, only the global option string got duplicated and transferred to the caller; the per-driver options were owned by fb_get_options(). In the end, it was impossible for the function's caller to detect if it had to release the string's memory buffer. Hence, all calling drivers leak the memory buffer. The leaks have existed ever since, but drivers only call fb_get_option() once as part of module initialization. So the amount of leaked memory is not significant. Fix the semantics of fb_get_option() by unconditionally transferring ownership of the memory buffer to the caller. Later patches can resolve the memory leaks in the fbdev drivers. Signed-off-by:
-
Thomas Zimmermann authored
Fix Daniel's email address. No functional changes. Signed-off-by:
-
Simon Ser authored
v2: mention caps, note that the IOCTLs might fail, document that user-space needs a data structure to keep track of the handles (Daniel V.) Signed-off-by:
Simon Ser <contact@emersion.fr> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Pekka Paalanen <ppaalanen@gmail.com> Cc: Daniel Stone <daniel@fooishbar.org> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
-
Simon Ser authored
There are two important details missing from the docs: - If the memory object backing the FB already has a GEM handle, it's not re-used, a new one is generated. - Aliased planes will return the same GEM handle. v2: document how user-space can obtain DMA-BUF FDs without leaking handles (Pekka) Signed-off-by:
-
