- 19 Apr, 2018 40 commits
-
-
Yunlong Song authored
commit b94929d9 upstream. Commit 7a20b8a6 ("f2fs: allocate node and hot data in the beginning of partition") introduces another mount option, heap, to reset it back. But it does not do anything for heap mode, so fix it. Cc: stable@vger.kernel.org Signed-off-by:
Yunlong Song <yunlong.song@huawei.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
commit f3aefb6a upstream. make_checksum_hmac_md5() is allocating an HMAC transform and doing crypto API calls in the following order: crypto_ahash_init() crypto_ahash_setkey() crypto_ahash_digest() This is wrong because it makes no sense to init() the request before a key has been set, given that the initial state depends on the key. And digest() is short for init() + update() + final(), so in this case there's no need to explicitly call init() at all. Before commit 9fa68f62 ("crypto: hash - prevent using keyed hashes without setting key") the extra init() had no real effect, at least for the software HMAC implementation. (There are also hardware drivers that implement HMAC-MD5, and it's not immediately obvious how gracefully they handle init() before setkey().) But now the crypto API detects this incorrect initialization and returns -ENOKEY. This is breaking NFS mounts in some cases. Fix it by removing the incorrect call to crypto_ahash_init(). Reported-by:
Michael Young <m.a.young@durham.ac.uk> Fixes: 9fa68f62 ("crypto: hash - prevent using keyed hashes without setting key") Fixes: fffdaef2 ("gss_krb5: Add support for rc4-hmac encryption") Cc: stable@vger.kernel.org Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Toke Høiland-Jørgensen authored
commit 182b1917 upstream. When ath9k was switched over to use the mac80211 intermediate queues, node cleanup now drains the mac80211 queues. However, this call path is not protected by rcu_read_lock() as it was previously entirely internal to the driver which uses its own locking. This leads to a possible rcu_dereference() without holding rcu_read_lock(); but only if a station is cleaned up while having packets queued on the TXQ. Fix this by adding the rcu_read_lock() to the caller in ath9k. Fixes: 50f08edf ("ath9k: Switch to using mac80211 intermediate software queues.") Cc: stable@vger.kernel.org Reported-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Marek Szyprowski authored
commit 0c4c5860 upstream. Initialize data->config_lock mutex before it is used by the driver code. This fixes following warning on Odroid XU3 boards: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc7-next-20180115-00001-gb75575dee3f2 #107 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c0111504>] (unwind_backtrace) from [<c010dbec>] (show_stack+0x10/0x14) [<c010dbec>] (show_stack) from [<c09b3f74>] (dump_stack+0x90/0xc8) [<c09b3f74>] (dump_stack) from [<c0179528>] (register_lock_class+0x1c0/0x59c) [<c0179528>] (register_lock_class) from [<c017bd1c>] (__lock_acquire+0x78/0x1850) [<c017bd1c>] (__lock_acquire) from [<c017de30>] (lock_acquire+0xc8/0x2b8) [<c017de30>] (lock_acquire) from [<c09ca59c>] (__mutex_lock+0x60/0xa0c) [<c09ca59c>] (__mutex_lock) from [<c09cafd0>] (mutex_lock_nested+0x1c/0x24) [<c09cafd0>] (mutex_lock_nested) from [<c068b0d0>] (ina2xx_set_shunt+0x70/0xb0) [<c068b0d0>] (ina2xx_set_shunt) from [<c068b218>] (ina2xx_probe+0x88/0x1b0) [<c068b218>] (ina2xx_probe) from [<c0673d90>] (i2c_device_probe+0x1e0/0x2d0) [<c0673d90>] (i2c_device_probe) from [<c053a268>] (driver_probe_device+0x2b8/0x4a0) [<c053a268>] (driver_probe_device) from [<c053a54c>] (__driver_attach+0xfc/0x120) [<c053a54c>] (__driver_attach) from [<c05384cc>] (bus_for_each_dev+0x58/0x7c) [<c05384cc>] (bus_for_each_dev) from [<c0539590>] (bus_add_driver+0x174/0x250) [<c0539590>] (bus_add_driver) from [<c053b5e0>] (driver_register+0x78/0xf4) [<c053b5e0>] (driver_register) from [<c0675ef0>] (i2c_register_driver+0x38/0xa8) [<c0675ef0>] (i2c_register_driver) from [<c0102b40>] (do_one_initcall+0x48/0x18c) [<c0102b40>] (do_one_initcall) from [<c0e00df0>] (kernel_init_freeable+0x110/0x1d4) [<c0e00df0>] (kernel_init_freeable) from [<c09c8120>] (kernel_init+0x8/0x114) [<c09c8120>] (kernel_init) from [<c01010b4>] (ret_from_fork+0x14/0x20) Fixes: 5d389b12 ("hwmon: (ina2xx) Make calibration register value fixed") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Yazen Ghannam authored
commit 27bd5950 upstream. The block address is saved after the block is initialized when threshold_init_device() is called. Use the saved block address, if available, rather than trying to rediscover it. This will avoid a call trace, when resuming from suspend, due to the rdmsr_safe_on_cpu() call in get_block_address(). The rdmsr_safe_on_cpu() call issues an IPI but we're running with interrupts disabled. This triggers: WARNING: CPU: 0 PID: 11523 at kernel/smp.c:291 smp_call_function_single+0xdc/0xe0 Signed-off-by:
Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> # 4.14.x Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180221101900.10326-8-bp@alien8.deSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Yazen Ghannam authored
commit 68627a69 upstream. Currently, bank 4 is reserved on Fam17h, so we chose not to initialize bank 4 in the smca_banks array. This means that when we check if a bank is initialized, like during boot or resume, we will see that bank 4 is not initialized and try to initialize it. This will cause a call trace, when resuming from suspend, due to rdmsr_*on_cpu() calls in the init path. The rdmsr_*on_cpu() calls issue an IPI but we're running with interrupts disabled. This triggers: WARNING: CPU: 0 PID: 11523 at kernel/smp.c:291 smp_call_function_single+0xdc/0xe0 ... Reserved banks will be read-as-zero, so their MCA_IPID register will be zero. So, like the smca_banks array, the threshold_banks array will not have an entry for a reserved bank since all its MCA_MISC* registers will be zero. Enumerate a "Reserved" bank type that matches on a HWID_MCATYPE of 0,0. Use the "Reserved" type when checking if a bank is reserved. It's possible that other bank numbers may be reserved on future systems. Don't try to find the block address on reserved banks. Signed-off-by:
-
Yazen Ghannam authored
commit e5d6a126 upstream. Pass the bank number to smca_get_bank_type() since that's all we need. Also, we should compare the bank number to MAX_NR_BANKS (size of the smca_banks array) not the number of bank types. Bank types are reused for multiple banks, so the number of types can be different from the number of banks in a system and thus we could return an invalid bank type. Signed-off-by:
-
Yazen Ghannam authored
commit c6708d50 upstream. The MCA_STATUS[ErrorCodeExt] field is very bank type specific. We currently check if the ErrorCodeExt value is 0x0 or 0x8 in mce_is_memory_error(), but we don't check the bank number. This means that we could flag non-memory errors as memory errors. We know that we want to flag DRAM ECC errors as memory errors, so let's do those cases first. We can add more cases later when needed. Define a wrapper function in mce_amd.c so we can use SMCA enums. [ bp: Remove brackets around return statements. ] Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171207203955.118171-2-Yazen.Ghannam@amd.comSigned-off-by:
-
Sudhir Sreedharan authored
commit 7972326a upstream. This can be reproduced by bind/unbind the driver multiple times in AM3517 board. Analysis revealed that rtl8187_start() was invoked before probe finishes(ie. before the mutex is initialized). INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250 Hardware name: Generic AM3517 (Flattened Device Tree) [<c010e0d8>] (unwind_backtrace) from [<c010beac>] (show_stack+0x10/0x14) [<c010beac>] (show_stack) from [<c017401c>] (register_lock_class+0x4f4/0x55c) [<c017401c>] (register_lock_class) from [<c0176fe0>] (__lock_acquire+0x74/0x1938) [<c0176fe0>] (__lock_acquire) from [<c0178cfc>] (lock_acquire+0xfc/0x23c) [<c0178cfc>] (lock_acquire) from [<c08aa2f8>] (mutex_lock_nested+0x50/0x3b0) [<c08aa2f8>] (mutex_lock_nested) from [<c05f5bf8>] (rtl8187_start+0x2c/0xd54) [<c05f5bf8>] (rtl8187_start) from [<c082dea0>] (drv_start+0xa8/0x320) [<c082dea0>] (drv_start) from [<c084d1d4>] (ieee80211_do_open+0x2bc/0x8e4) [<c084d1d4>] (ieee80211_do_open) from [<c069be94>] (__dev_open+0xb8/0x120) [<c069be94>] (__dev_open) from [<c069c11c>] (__dev_change_flags+0x88/0x14c) [<c069c11c>] (__dev_change_flags) from [<c069c1f8>] (dev_change_flags+0x18/0x48) [<c069c1f8>] (dev_change_flags) from [<c0710b08>] (devinet_ioctl+0x738/0x840) [<c0710b08>] (devinet_ioctl) from [<c067925c>] (sock_ioctl+0x164/0x2f4) [<c067925c>] (sock_ioctl) from [<c02883f8>] (do_vfs_ioctl+0x8c/0x9d0) [<c02883f8>] (do_vfs_ioctl) from [<c0288da8>] (SyS_ioctl+0x6c/0x7c) [<c0288da8>] (SyS_ioctl) from [<c0107760>] (ret_fast_syscall+0x0/0x1c) Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = cd1ec000 [00000000] *pgd=8d1de831, *pte=00000000, *ppte=00000000 Internal error: Oops: 817 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250 Hardware name: Generic AM3517 (Flattened Device Tree) task: ce73eec0 task.stack: cd1ea000 PC is at mutex_lock_nested+0xe8/0x3b0 LR is at mutex_lock_nested+0xd0/0x3b0 Cc: stable@vger.kernel.org Signed-off-by:
Sudhir Sreedharan <ssreedharan@mvista.com> Signed-off-by:
-
Hans de Goede authored
commit bb5208b3 upstream. Older devices with a serdev attached bcm bt hci, use an Interrupt ACPI resource to describe the IRQ (rather then a GpioInt resource). These device seem to all claim the IRQ is active-high and seem to all need a DMI quirk to treat it as active-low. Instead simply always assume that Interrupt resource specified IRQs are always active-low. This fixes the bt device not being able to wake the host from runtime- suspend on the: Asus T100TAM, Asus T200TA, Lenovo Yoga2 and the Toshiba Encore, without the need to add 4 new DMI quirks for these models. This also allows us to remove 2 DMI quirks for the Asus T100TA and Asus T100CHI series. Likely the 2 remaining quirks can also be removed but I could not find a DSDT of these devices to verify this. Cc: stable@vger.kernel.org Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=198953 Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1554835Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Szymon Janc authored
commit 082f2300 upstream. Local random address needs to be updated before creating connection if RPA from LE Direct Advertising Report was resolved in host. Otherwise remote device might ignore connection request due to address mismatch. This was affecting following qualification test cases: GAP/CONN/SCEP/BV-03-C, GAP/CONN/GCEP/BV-05-C, GAP/CONN/DCEP/BV-05-C Before patch: < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #11350 [hci0] 84680.231216 Address: 56:BC:E8:24:11:68 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) > HCI Event: Command Complete (0x0e) plen 4 #11351 [hci0] 84680.246022 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #11352 [hci0] 84680.246417 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #11353 [hci0] 84680.248854 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11354 [hci0] 84680.249466 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #11355 [hci0] 84680.253222 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #11356 [hci0] 84680.458387 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:D6:76:8C:DF:82 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) RSSI: -74 dBm (0xb6) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11357 [hci0] 84680.458737 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #11358 [hci0] 84680.469982 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #11359 [hci0] 84680.470444 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #11360 [hci0] 84680.474971 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0 #11361 [hci0] 84682.545385 > HCI Event: Command Complete (0x0e) plen 4 #11362 [hci0] 84682.551014 LE Create Connection Cancel (0x08|0x000e) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #11363 [hci0] 84682.551074 LE Connection Complete (0x01) Status: Unknown Connection Identifier (0x02) Handle: 0 Role: Master (0x00) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Connection interval: 0.00 msec (0x0000) Connection latency: 0 (0x0000) Supervision timeout: 0 msec (0x0000) Master clock accuracy: 0x00 After patch: < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #210 [hci0] 667.152459 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #211 [hci0] 667.153613 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #212 [hci0] 667.153704 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #213 [hci0] 667.154584 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #214 [hci0] 667.182619 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) RSSI: -70 dBm (0xba) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #215 [hci0] 667.182704 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #216 [hci0] 667.183599 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #217 [hci0] 667.183645 Address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) > HCI Event: Command Complete (0x0e) plen 4 #218 [hci0] 667.184590 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #219 [hci0] 667.184613 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #220 [hci0] 667.186558 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #221 [hci0] 667.485824 LE Connection Complete (0x01) Status: Success (0x00) Handle: 0 Role: Master (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x07 @ MGMT Event: Device Connected (0x000b) plen 13 {0x0002} [hci0] 667.485996 LE Address: 11:22:33:44:55:66 (OUI 11-22-33) Flags: 0x00000000 Data length: 0 Signed-off-by:
Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by:
-
Al Viro authored
commit 30ce4d19 upstream. missed it in "kill struct filename.separate" several years ago. Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Michael S. Tsirkin authored
commit c61611f7 upstream. get_user_pages_fast is supposed to be a faster drop-in equivalent of get_user_pages. As such, callers expect it to return a negative return code when passed an invalid address, and never expect it to return 0 when passed a positive number of pages, since its documentation says: * Returns number of pages pinned. This may be fewer than the number * requested. If nr_pages is 0 or negative, returns 0. If no pages * were pinned, returns -errno. When get_user_pages_fast fall back on get_user_pages this is exactly what happens. Unfortunately the implementation is inconsistent: it returns 0 if passed a kernel address, confusing callers: for example, the following is pretty common but does not appear to do the right thing with a kernel address: ret = get_user_pages_fast(addr, 1, writeable, &page); if (ret < 0) return ret; Change get_user_pages_fast to return -EFAULT when supplied a kernel address to make it match expectations. All callers have been audited for consistency with the documented semantics. Link: http://lkml.kernel.org/r/1522962072-182137-4-git-send-email-mst@redhat.com Fixes: 5b65c467 ("mm, x86/mm: Fix performance regression in get_user_pages_fast()") Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reported-by: syzbot+6304bf97ef436580fede@syzkaller.appspotmail.com Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: <stable@vger.kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Vasily Gorbik authored
commit 15deb080 upstream. When loadparm is set in reipl parm block, the kernel should also set DIAG308_FLAGS_LP_VALID flag. This fixes loadparm ignoring during z/VM fcp -> ccw reipl and kvm direct boot -> ccw reipl. Cc: <stable@vger.kernel.org> Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
commit 0cf1e051 upstream. On an Output queue, both EMPTY and PENDING buffer states imply that the buffer is ready for completion-processing by the upper-layer drivers. So for a non-QEBSM Output queue, get_buf_states() merges mixed batches of PENDING and EMPTY buffers into one large batch of EMPTY buffers. The upper-layer driver (ie. qeth) later distuingishes PENDING from EMPTY by inspecting the slsb_state for QDIO_OUTBUF_STATE_FLAG_PENDING. But the merge logic in get_buf_states() contains a bug that causes us to erronously also merge ERROR buffers into such a batch of EMPTY buffers (ERROR is 0xaf, EMPTY is 0xa1; so ERROR & EMPTY == EMPTY). Effectively, most outbound ERROR buffers are currently discarded silently and processed as if they had succeeded. Note that this affects _all_ non-QEBSM device types, not just IQD with CQ. Fix it by explicitly spelling out the exact conditions for merging. For extracting the "get initial state" part out of the loop, this relies on the fact that get_buf_states() is never called with a count of 0. The QEBSM path already strictly requires this, and the two callers with variable 'count' make sure of it. Fixes: 104ea556 ("qdio: support asynchronous delivery of storage blocks") Cc: <stable@vger.kernel.org> #v3.2+ Signed-off-by:
Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by:
Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
commit dae55b6f upstream. Immediate retry of EQBS after CCQ 96 means that we potentially misreport the state of buffers inspected during the first EQBS call. This occurs when 1. the first EQBS finds all inspected buffers still in the initial state set by the driver (ie INPUT EMPTY or OUTPUT PRIMED), 2. the EQBS terminates early with CCQ 96, and 3. by the time that the second EQBS comes around, the state of those previously inspected buffers has changed. If the state reported by the second EQBS is 'driver-owned', all we know is that the previous buffers are driver-owned now as well. But we can't tell if they all have the same state. So for instance - the second EQBS reports OUTPUT EMPTY, but any number of the previous buffers could be OUTPUT ERROR by now, - the second EQBS reports OUTPUT ERROR, but any number of the previous buffers could be OUTPUT EMPTY by now. Effectively, this can result in both over- and underreporting of errors. If the state reported by the second EQBS is 'HW-owned', that doesn't guarantee that the previous buffers have not been switched to driver-owned in the mean time. So for instance - the second EQBS reports INPUT EMPTY, but any number of the previous buffers could be INPUT PRIMED (or INPUT ERROR) by now. This would result in failure to process pending work on the queue. If it's the final check before yielding initiative, this can cause a (temporary) queue stall due to IRQ avoidance. Fixes: 25f269f1 ("[S390] qdio: EQBS retry after CCQ 96") Cc: <stable@vger.kernel.org> #v3.2+ Signed-off-by:
-
Dan Williams authored
commit 8d0d8ed3 upstream. Commit 1cf03c00 "nfit: scrub and register regions in a workqueue" mistakenly attempts to register a region per BLK aperture. There is nothing to register for individual apertures as they belong as a set to a BLK aperture group that are registered with a corresponding DIMM-control-region. Filter them for registration to prevent some needless devm_kzalloc() allocations. Cc: <stable@vger.kernel.org> Fixes: 1cf03c00 ("nfit: scrub and register regions in a workqueue") Reviewed-by:
Dave Jiang <dave.jiang@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Tetsuo Handa authored
commit 1e047eaa upstream. syzbot is reporting deadlocks at __blkdev_get() [1]. ---------------------------------------- [ 92.493919] systemd-udevd D12696 525 1 0x00000000 [ 92.495891] Call Trace: [ 92.501560] schedule+0x23/0x80 [ 92.502923] schedule_preempt_disabled+0x5/0x10 [ 92.504645] __mutex_lock+0x416/0x9e0 [ 92.510760] __blkdev_get+0x73/0x4f0 [ 92.512220] blkdev_get+0x12e/0x390 [ 92.518151] do_dentry_open+0x1c3/0x2f0 [ 92.519815] path_openat+0x5d9/0xdc0 [ 92.521437] do_filp_open+0x7d/0xf0 [ 92.527365] do_sys_open+0x1b8/0x250 [ 92.528831] do_syscall_64+0x6e/0x270 [ 92.530341] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 92.931922] 1 lock held by systemd-udevd/525: [ 92.933642] #0: 00000000a2849e25 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x73/0x4f0 ---------------------------------------- The reason of deadlock turned out that wait_event_interruptible() in blk_queue_enter() got stuck with bdev->bd_mutex held at __blkdev_put() due to q->mq_freeze_depth == 1. ---------------------------------------- [ 92.787172] a.out S12584 634 633 0x80000002 [ 92.789120] Call Trace: [ 92.796693] schedule+0x23/0x80 [ 92.797994] blk_queue_enter+0x3cb/0x540 [ 92.803272] generic_make_request+0xf0/0x3d0 [ 92.807970] submit_bio+0x67/0x130 [ 92.810928] submit_bh_wbc+0x15e/0x190 [ 92.812461] __block_write_full_page+0x218/0x460 [ 92.815792] __writepage+0x11/0x50 [ 92.817209] write_cache_pages+0x1ae/0x3d0 [ 92.825585] generic_writepages+0x5a/0x90 [ 92.831865] do_writepages+0x43/0xd0 [ 92.836972] __filemap_fdatawrite_range+0xc1/0x100 [ 92.838788] filemap_write_and_wait+0x24/0x70 [ 92.840491] __blkdev_put+0x69/0x1e0 [ 92.841949] blkdev_close+0x16/0x20 [ 92.843418] __fput+0xda/0x1f0 [ 92.844740] task_work_run+0x87/0xb0 [ 92.846215] do_exit+0x2f5/0xba0 [ 92.850528] do_group_exit+0x34/0xb0 [ 92.852018] SyS_exit_group+0xb/0x10 [ 92.853449] do_syscall_64+0x6e/0x270 [ 92.854944] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 92.943530] 1 lock held by a.out/634: [ 92.945105] #0: 00000000a2849e25 (&bdev->bd_mutex){+.+.}, at: __blkdev_put+0x3c/0x1e0 ---------------------------------------- The reason of q->mq_freeze_depth == 1 turned out that loop_set_status() forgot to call blk_mq_unfreeze_queue() at error paths for info->lo_encrypt_type != NULL case. ---------------------------------------- [ 37.509497] CPU: 2 PID: 634 Comm: a.out Tainted: G W 4.16.0+ #457 [ 37.513608] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 [ 37.518832] RIP: 0010:blk_freeze_queue_start+0x17/0x40 [ 37.521778] RSP: 0018:ffffb0c2013e7c60 EFLAGS: 00010246 [ 37.524078] RAX: 0000000000000000 RBX: ffff8b07b1519798 RCX: 0000000000000000 [ 37.527015] RDX: 0000000000000002 RSI: ffffb0c2013e7cc0 RDI: ffff8b07b1519798 [ 37.529934] RBP: ffffb0c2013e7cc0 R08: 0000000000000008 R09: 47a189966239b898 [ 37.532684] R10: dad78b99b278552f R11: 9332dca72259d5ef R12: ffff8b07acd73678 [ 37.535452] R13: 0000000000004c04 R14: 0000000000000000 R15: ffff8b07b841e940 [ 37.538186] FS: 00007fede33b9740(0000) GS:ffff8b07b8e80000(0000) knlGS:0000000000000000 [ 37.541168] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 37.543590] CR2: 00000000206fdf18 CR3: 0000000130b30006 CR4: 00000000000606e0 [ 37.546410] Call Trace: [ 37.547902] blk_freeze_queue+0x9/0x30 [ 37.549968] loop_set_status+0x67/0x3c0 [loop] [ 37.549975] loop_set_status64+0x3b/0x70 [loop] [ 37.549986] lo_ioctl+0x223/0x810 [loop] [ 37.549995] blkdev_ioctl+0x572/0x980 [ 37.550003] block_ioctl+0x34/0x40 [ 37.550006] do_vfs_ioctl+0xa7/0x6d0 [ 37.550017] ksys_ioctl+0x6b/0x80 [ 37.573076] SyS_ioctl+0x5/0x10 [ 37.574831] do_syscall_64+0x6e/0x270 [ 37.576769] entry_SYSCALL_64_after_hwframe+0x42/0xb7 ---------------------------------------- [1] https://syzkaller.appspot.com/bug?id=cd662bc3f6022c0979d01a262c318fab2ee9b56fSigned-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
syzbot <bot+48594378e9851eab70bcd6f99327c7db58c5a28a@syzkaller.appspotmail.com> Fixes: ecdd0959 ("block/loop: fix race between I/O and set_status") Cc: Ming Lei <tom.leiming@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: stable <stable@vger.kernel.org> Cc: Jens Axboe <axboe@fb.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
John Johansen authored
commit b5beb07a upstream. Resource auditing is using the peer field which is not available when the rlim data struct is used, because it is a different element of the same union. Accessing peer during resource auditing could cause garbage log entries or even oops the kernel. Move the rlim data block into the same struct as the peer field so they can be used together. CC: <stable@vger.kernel.org> Fixes: 86b92cb7 ("apparmor: move resource checks to using labels") Signed-off-by:
John Johansen <john.johansen@canonical.com> Signed-off-by:
-
John Johansen authored
commit 040d9e2b upstream. The .ns_name should not be virtualized by the current ns view. It needs to report the ns base name as that is being used during startup as part of determining apparmor policy namespace support. BugLink: http://bugs.launchpad.net/bugs/1746463 Fixes: d9f02d9c ("apparmor: fix display of ns name") Cc: Stable <stable@vger.kernel.org> Reported-by:
Serge Hallyn <serge@hallyn.com> Tested-by:
-
John Johansen authored
commit 98cf5bbf upstream. The existence test is not being properly logged as the signal mapping maps it to the last entry in the named signal table. This is done to help catch bugs by making the 0 mapped signal value invalid so that we can catch the signal value not being filled in. When fixing the off-by-one comparision logic the reporting of the existence test was broken, because the logic behind the mapped named table was hidden. Fix this by adding a define for the name lookup and using it. Cc: Stable <stable@vger.kernel.org> Fixes: f7dc4c9a ("apparmor: fix off-by-one comparison on MAXMAPPED_SIG") Signed-off-by:
-
Bill Kuzeja authored
commit 6d634067 upstream. The code that fixes the crashes in the following commit introduced a small memory leak: commit 6a2cf8d3 ("scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure") Fixing this requires a bit of reworking, which I've explained. Also provide some code cleanup. There is a small window in qla2x00_probe_one where if qla2x00_alloc_queues fails, we end up never freeing req and rsp and leak 0xc0 and 0xc8 bytes respectively (the sizes of req and rsp). I originally put in checks to test for this condition which were based on the incorrect assumption that if ha->rsp_q_map and ha->req_q_map were allocated, then rsp and req were allocated as well. This is incorrect. There is a window between these allocations: ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp); goto probe_hw_failed; [if successful, both rsp and req allocated] base_vha = qla2x00_create_host(sht, ha); goto probe_hw_failed; ret = qla2x00_request_irqs(ha, rsp); goto probe_failed; if (qla2x00_alloc_queues(ha, req, rsp)) { goto probe_failed; [if successful, now ha->rsp_q_map and ha->req_q_map allocated] To simplify this, we should just set req and rsp to NULL after we free them. Sounds simple enough? The problem is that req and rsp are pointers defined in the qla2x00_probe_one and they are not always passed by reference to the routines that free them. Here are paths which can free req and rsp: PATH 1: qla2x00_probe_one ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp); [req and rsp are passed by reference, but if this fails, we currently do not NULL out req and rsp. Easily fixed] PATH 2: qla2x00_probe_one failing in qla2x00_request_irqs or qla2x00_alloc_queues probe_failed: qla2x00_free_device(base_vha); qla2x00_free_req_que(ha, req) qla2x00_free_rsp_que(ha, rsp) PATH 3: qla2x00_probe_one: failing in qla2x00_mem_alloc or qla2x00_create_host probe_hw_failed: qla2x00_free_req_que(ha, req) qla2x00_free_rsp_que(ha, rsp) PATH 1: This should currently work, but it doesn't because rsp and rsp are not set to NULL in qla2x00_mem_alloc. Easily remedied. PATH 2: req and rsp aren't passed in at all to qla2x00_free_device but are derived from ha->req_q_map[0] and ha->rsp_q_map[0]. These are only set up if qla2x00_alloc_queues succeeds. In qla2x00_free_queues, we are protected from crashing if these don't exist because req_qid_map and rsp_qid_map are only set on their allocation. We are guarded in this way: for (cnt = 0; cnt < ha->max_req_queues; cnt++) { if (!test_bit(cnt, ha->req_qid_map)) continue; PATH 3: This works. We haven't freed req or rsp yet (or they were never allocated if qla2x00_mem_alloc failed), so we'll attempt to free them here. To summarize, there are a few small changes to make this work correctly and (and for some cleanup): 1) (For PATH 1) Set *rsp and *req to NULL in case of failure in qla2x00_mem_alloc so these are correctly set to NULL back in qla2x00_probe_one 2) After jumping to probe_failed: and calling qla2x00_free_device, explicitly set rsp and req to NULL so further calls with these pointers do not crash, i.e. the free queue calls in the probe_hw_failed section we fall through to. 3) Fix return code check in the call to qla2x00_alloc_queues. We currently drop the return code on the floor. The probe fails but the caller of the probe doesn't have an error code, so it attaches to pci. This can result in a crash on module shutdown. 4) Remove unnecessary NULL checks in qla2x00_free_req_que, qla2x00_free_rsp_que, and the egregious NULL checks before kfrees and vfrees in qla2x00_mem_free. I tested this out running a scenario where the card breaks at various times during initialization. I made sure I forced every error exit path in qla2x00_probe_one. Cc: <stable@vger.kernel.org> # v4.16 Fixes: 6a2cf8d3 ("scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure") Signed-off-by:
Bill Kuzeja <william.kuzeja@stratus.com> Acked-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Yazen Ghannam authored
commit 11cf8877 upstream. Scalable MCA systems have various types of banks. The bank's type can determine how we handle errors from it. For example, if a bank represents a UMC (Unified Memory Controller) then we will need to convert its address from a normalized address to a system physical address before handling the error. [ bp: Verify m->bank is within range and use bank pointer. ] Signed-off-by:
-
Arnd Bergmann authored
commit c02216ac upstream. In randconfig testing, we sometimes get this warning: drivers/gpu/drm/radeon/radeon_object.c: In function 'radeon_bo_create': drivers/gpu/drm/radeon/radeon_object.c:242:2: error: #warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance thanks to write-combining [-Werror=cpp] #warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance \ This is rather annoying since almost all other code produces no build-time output unless we have found a real bug. We already fixed this in the amdgpu driver in commit 31bb90f1 ("drm/amdgpu: shut up #warning for compile testing") by adding a CONFIG_COMPILE_TEST check last year and agreed to do the same here, but both Michel and I then forgot about it until I came across the issue again now. For stable kernels, as this is one of very few remaining randconfig warnings in 4.14. Cc: stable@vger.kernel.org Link: https://patchwork.kernel.org/patch/9550009/Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Prashant Bhole authored
commit 621b6d2e upstream. A use-after-free bug was caught by KASAN while running usdt related code (BCC project. bcc/tests/python/test_usdt2.py): ================================================================== BUG: KASAN: use-after-free in uprobe_perf_close+0x222/0x3b0 Read of size 4 at addr ffff880384f9b4a4 by task test_usdt2.py/870 CPU: 4 PID: 870 Comm: test_usdt2.py Tainted: G W 4.16.0-next-20180409 #215 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0xc7/0x15b ? show_regs_print_info+0x5/0x5 ? printk+0x9c/0xc3 ? kmsg_dump_rewind_nolock+0x6e/0x6e ? uprobe_perf_close+0x222/0x3b0 print_address_description+0x83/0x3a0 ? uprobe_perf_close+0x222/0x3b0 kasan_report+0x1dd/0x460 ? uprobe_perf_close+0x222/0x3b0 uprobe_perf_close+0x222/0x3b0 ? probes_open+0x180/0x180 ? free_filters_list+0x290/0x290 trace_uprobe_register+0x1bb/0x500 ? perf_event_attach_bpf_prog+0x310/0x310 ? probe_event_disable+0x4e0/0x4e0 perf_uprobe_destroy+0x63/0xd0 _free_event+0x2bc/0xbd0 ? lockdep_rcu_suspicious+0x100/0x100 ? ring_buffer_attach+0x550/0x550 ? kvm_sched_clock_read+0x1a/0x30 ? perf_event_release_kernel+0x3e4/0xc00 ? __mutex_unlock_slowpath+0x12e/0x540 ? wait_for_completion+0x430/0x430 ? lock_downgrade+0x3c0/0x3c0 ? lock_release+0x980/0x980 ? do_raw_spin_trylock+0x118/0x150 ? do_raw_spin_unlock+0x121/0x210 ? do_raw_spin_trylock+0x150/0x150 perf_event_release_kernel+0x5d4/0xc00 ? put_event+0x30/0x30 ? fsnotify+0xd2d/0xea0 ? sched_clock_cpu+0x18/0x1a0 ? __fsnotify_update_child_dentry_flags.part.0+0x1b0/0x1b0 ? pvclock_clocksource_read+0x152/0x2b0 ? pvclock_read_flags+0x80/0x80 ? kvm_sched_clock_read+0x1a/0x30 ? sched_clock_cpu+0x18/0x1a0 ? pvclock_clocksource_read+0x152/0x2b0 ? locks_remove_file+0xec/0x470 ? pvclock_read_flags+0x80/0x80 ? fcntl_setlk+0x880/0x880 ? ima_file_free+0x8d/0x390 ? lockdep_rcu_suspicious+0x100/0x100 ? ima_file_check+0x110/0x110 ? fsnotify+0xea0/0xea0 ? kvm_sched_clock_read+0x1a/0x30 ? rcu_note_context_switch+0x600/0x600 perf_release+0x21/0x40 __fput+0x264/0x620 ? fput+0xf0/0xf0 ? do_raw_spin_unlock+0x121/0x210 ? do_raw_spin_trylock+0x150/0x150 ? SyS_fchdir+0x100/0x100 ? fsnotify+0xea0/0xea0 task_work_run+0x14b/0x1e0 ? task_work_cancel+0x1c0/0x1c0 ? copy_fd_bitmaps+0x150/0x150 ? vfs_read+0xe5/0x260 exit_to_usermode_loop+0x17b/0x1b0 ? trace_event_raw_event_sys_exit+0x1a0/0x1a0 do_syscall_64+0x3f6/0x490 ? syscall_return_slowpath+0x2c0/0x2c0 ? lockdep_sys_exit+0x1f/0xaa ? syscall_return_slowpath+0x1a3/0x2c0 ? lockdep_sys_exit+0x1f/0xaa ? prepare_exit_to_usermode+0x11c/0x1e0 ? enter_from_user_mode+0x30/0x30 random: crng init done ? __put_user_4+0x1c/0x30 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7f41d95f9340 RSP: 002b:00007fffe71e4268 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 000000000000000d RCX: 00007f41d95f9340 RDX: 0000000000000000 RSI: 0000000000002401 RDI: 000000000000000d RBP: 0000000000000000 R08: 00007f41ca8ff700 R09: 00007f41d996dd1f R10: 00007fffe71e41e0 R11: 0000000000000246 R12: 00007fffe71e4330 R13: 0000000000000000 R14: fffffffffffffffc R15: 00007fffe71e4290 Allocated by task 870: kasan_kmalloc+0xa0/0xd0 kmem_cache_alloc_node+0x11a/0x430 copy_process.part.19+0x11a0/0x41c0 _do_fork+0x1be/0xa20 do_syscall_64+0x198/0x490 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Freed by task 0: __kasan_slab_free+0x12e/0x180 kmem_cache_free+0x102/0x4d0 free_task+0xfe/0x160 __put_task_struct+0x189/0x290 delayed_put_task_struct+0x119/0x250 rcu_process_callbacks+0xa6c/0x1b60 __do_softirq+0x238/0x7ae The buggy address belongs to the object at ffff880384f9b480 which belongs to the cache task_struct of size 12928 It occurs because task_struct is freed before perf_event which refers to the task and task flags are checked while teardown of the event. perf_event_alloc() assigns task_struct to hw.target of perf_event, but there is no reference counting for it. As a fix we get_task_struct() in perf_event_alloc() at above mentioned assignment and put_task_struct() in _free_event(). Signed-off-by:
Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Reviewed-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 63b6da39 ("perf: Fix perf_event_exit_task() race") Link: http://lkml.kernel.org/r/20180409100346.6416-1-bhole_prashant_q7@lab.ntt.co.jpSigned-off-by:
-
Adrian Hunter authored
commit 91d29b28 upstream. timestamp_insn_cnt is used to estimate the timestamp based on the number of instructions since the last known timestamp. If the estimate is not accurate enough decoding might not be correctly synchronized with side-band events causing more trace errors. However there are always timestamps following an overflow, so the estimate is not needed and can indeed result in more errors. Suppress the estimate by setting timestamp_insn_cnt to zero. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1520431349-30689-5-git-send-email-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Adrian Hunter authored
commit 1c196a6c upstream. When a TIP packet is expected but there is a different packet, it is an error. However the unexpected packet might be something important like a TSC packet, so after the error, it is necessary to continue from there, rather than the next packet. That is achieved by setting pkt_step to zero. Signed-off-by:
-
Adrian Hunter authored
commit 63d8e38f upstream. sync_switch is a facility to synchronize decoding more closely with the point in the kernel when the context actually switched. The flag when sync_switch is enabled was global to the decoding, whereas it is really specific to the CPU. The trace data for different CPUs is put on different queues, so add sync_switch to the intel_pt_queue structure and use that in preference to the global setting in the intel_pt structure. That fixes problems decoding one CPU's trace because sync_switch was disabled on a different CPU's queue. Signed-off-by:
-
Adrian Hunter authored
commit 117db4b2 upstream. Overlap detection was not not updating the buffer's 'consecutive' flag. Marking buffers consecutive has the advantage that decoding begins from the start of the buffer instead of the first PSB. Fix overlap detection to identify consecutive buffers correctly. Signed-off-by:
-
Nicholas Piggin authored
commit 19ce7909 upstream. This crashes with a "Bad real address for load" attempting to load from the vmalloc region in realmode (faulting address is in DAR). Oops: Bad interrupt in KVM entry/exit code, sig: 6 [#1] LE SMP NR_CPUS=2048 NUMA PowerNV CPU: 53 PID: 6582 Comm: qemu-system-ppc Not tainted 4.16.0-01530-g43d1859f0994 NIP: c0000000000155ac LR: c0000000000c2430 CTR: c000000000015580 REGS: c000000fff76dd80 TRAP: 0200 Not tainted (4.16.0-01530-g43d1859f0994) MSR: 9000000000201003 <SF,HV,ME,RI,LE> CR: 48082222 XER: 00000000 CFAR: 0000000102900ef0 DAR: d00017fffd941a28 DSISR: 00000040 SOFTE: 3 NIP [c0000000000155ac] perf_trace_tlbie+0x2c/0x1a0 LR [c0000000000c2430] do_tlbies+0x230/0x2f0 I suspect the reason is the per-cpu data is not in the linear chunk. This could be restored if that was able to be fixed, but for now, just remove the tracepoints. Fixes: 0428491c ("powerpc/mm: Trace tlbie(l) instructions") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Dexuan Cui authored
commit 021ad274 upstream. When we hot-remove the device, we first receive a PCI_EJECT message and then receive a PCI_BUS_RELATIONS message with bus_rel->device_count == 0. The first message is offloaded to hv_eject_device_work(), and the second is offloaded to pci_devices_present_work(). Both the paths can be running list_del(&hpdev->list_entry), causing general protection fault, because system_wq can run them concurrently. The patch eliminates the race condition. Since access to present/eject work items is serialized, we do not need the hbus->enum_sem anymore, so remove it. Fixes: 4daace0d ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs") Link: https://lkml.kernel.org/r/KL1P15301MB00064DA6B4D221123B5241CFBFD70@KL1P15301MB0006.APCP153.PROD.OUTLOOK.COMTested-by:
Adrian Suhov <v-adsuho@microsoft.com> Tested-by:
Chris Valean <v-chvale@microsoft.com> Signed-off-by:
Dexuan Cui <decui@microsoft.com> [lorenzo.pieralisi@arm.com: squashed semaphore removal patch] Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Acked-by:
Haiyang Zhang <haiyangz@microsoft.com> Cc: <stable@vger.kernel.org> # v4.6+ Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Jack Morgenstein <jackm@mellanox.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Dexuan Cui authored
commit 238064f1 upstream. The pci-hyperv driver's channel callback hv_pci_onchannelcallback() is not really a hot path, so we don't need to mark it as a perf_device, meaning with this patch all HV_PCIE channels' target_cpu will be CPU0. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Helge Deller authored
commit d5654e15 upstream. Make sure that the HPMC (High Priority Machine Check) handler is 16-byte aligned and that it's length in the IVT is a multiple of 16 bytes. Otherwise PDC may decide not to call the HPMC crash handler. Signed-off-by:
Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by:
-
Helge Deller authored
commit 615b2665 upstream. As found by the ubsan checker, the value of the 'index' variable can be out of range for the bc[] array: UBSAN: Undefined behaviour in arch/parisc/kernel/drivers.c:655:21 index 6 is out of range for type 'char [6]' Backtrace: [<104fa850>] __ubsan_handle_out_of_bounds+0x68/0x80 [<1019d83c>] check_parent+0xc0/0x170 [<1019d91c>] descend_children+0x30/0x6c [<1059e164>] device_for_each_child+0x60/0x98 [<1019cd54>] parse_tree_node+0x40/0x54 [<1019d86c>] check_parent+0xf0/0x170 [<1019d91c>] descend_children+0x30/0x6c [<1059e164>] device_for_each_child+0x60/0x98 [<1019d938>] descend_children+0x4c/0x6c [<1059e164>] device_for_each_child+0x60/0x98 [<1019cd54>] parse_tree_node+0x40/0x54 [<1019cffc>] hwpath_to_device+0xa4/0xc4 Signed-off-by:
-
Kieran Bingham authored
commit 613928e8 upstream. To allow dual pipelines utilising two WPF entities when available, the VSP was updated to support header-mode display list in continuous pipelines. A small bug in the status check of the command register causes the second pipeline to be directly afflicted by the running of the first; appearing as a perceived performance issue with stuttering display. Fix the vsp1_dl_list_hw_update_pending() call to ensure that the read comparison corresponds to the correct pipeline. Fixes: eaf4bfad ("v4l: vsp1: Add support for header display lists in continuous mode") Cc: "Stable v4.14+" <stable@vger.kernel.org> Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 85ea29f1 upstream. At put_v4l2_window32(), it tries to access kp->clips. However, kp points to an userspace pointer. So, it should be obtained via get_user(), otherwise it can OOPS: vivid-000: ================== END STATUS ================== BUG: unable to handle kernel paging request at 00000000fffb18e0 IP: [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] PGD 3f5776067 PUD 3f576f067 PMD 3f5769067 PTE 800000042548f067 Oops: 0001 [#1] SMP Modules linked in: vivid videobuf2_vmalloc videobuf2_memops v4l2_dv_timings videobuf2_core v4l2_common videodev media xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill binfmt_misc snd_hda_codec_hdmi i915 snd_hda_intel snd_hda_controller snd_hda_codec intel_rapl x86_pkg_temp_thermal snd_hwdep intel_powerclamp snd_pcm coretemp snd_seq_midi kvm_intel kvm snd_seq_midi_event snd_rawmidi i2c_algo_bit drm_kms_helper snd_seq drm crct10dif_pclmul e1000e snd_seq_device crc32_pclmul snd_timer ghash_clmulni_intel snd mei_me mei ptp pps_core soundcore lpc_ich video crc32c_intel [last unloaded: media] CPU: 2 PID: 28332 Comm: v4l2-compliance Not tainted 3.18.102+ #107 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 task: ffff8804293f8000 ti: ffff8803f5640000 task.ti: ffff8803f5640000 RIP: 0010:[<ffffffffc05468d9>] [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] RSP: 0018:ffff8803f5643e28 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000fffb1ab4 RDX: 00000000fffb1a68 RSI: 00000000fffb18d8 RDI: 00000000fffb1aa8 RBP: ffff8803f5643e48 R08: 0000000000000001 R09: ffff8803f54b0378 R10: 0000000000000000 R11: 0000000000000168 R12: 00000000fffb18c0 R13: 00000000fffb1a94 R14: 00000000fffb18c8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880456d00000(0063) knlGS:00000000f7100980 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000fffb18e0 CR3: 00000003f552b000 CR4: 00000000003407e0 Stack: 00000000fffb1a94 00000000c0cc5640 0000000000000056 ffff8804274f3600 ffff8803f5643ed0 ffffffffc0547e16 0000000000000003 ffff8803f5643eb0 ffffffff81301460 ffff88009db44b01 ffff880441942520 ffff8800c0d05640 Call Trace: [<ffffffffc0547e16>] v4l2_compat_ioctl32+0x12d6/0x1b1d [videodev] [<ffffffff81301460>] ? file_has_perm+0x70/0xc0 [<ffffffff81252a2c>] compat_SyS_ioctl+0xec/0x1200 [<ffffffff8173241a>] sysenter_dispatch+0x7/0x21 Code: 00 00 48 8b 80 48 c0 ff ff 48 83 e8 38 49 39 c6 0f 87 2b ff ff ff 49 8d 45 1c e8 a3 ce e3 c0 85 c0 0f 85 1a ff ff ff 41 8d 40 ff <4d> 8b 64 24 20 41 89 d5 48 8d 44 40 03 4d 8d 34 c4 eb 15 0f 1f RIP [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] RSP <ffff8803f5643e28> CR2: 00000000fffb18e0 Tested with vivid driver on Kernel v3.18.102. Same bug happens upstream too: BUG: KASAN: user-memory-access in __put_v4l2_format32+0x98/0x4d0 [videodev] Read of size 8 at addr 00000000ffe48400 by task v4l2-compliance/8713 CPU: 0 PID: 8713 Comm: v4l2-compliance Not tainted 4.16.0-rc4+ #108 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 Call Trace: dump_stack+0x5c/0x7c kasan_report+0x164/0x380 ? __put_v4l2_format32+0x98/0x4d0 [videodev] __put_v4l2_format32+0x98/0x4d0 [videodev] v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev] ? __fsnotify_inode_delete+0x20/0x20 ? __put_v4l2_format32+0x4d0/0x4d0 [videodev] compat_SyS_ioctl+0x646/0x14d0 ? do_ioctl+0x30/0x30 do_fast_syscall_32+0x191/0x3f4 entry_SYSENTER_compat+0x6b/0x7a ================================================================== Disabling lock debugging due to kernel taint BUG: unable to handle kernel paging request at 00000000ffe48400 IP: __put_v4l2_format32+0x98/0x4d0 [videodev] PGD 3a22fb067 P4D 3a22fb067 PUD 39b6f0067 PMD 39b6f1067 PTE 80000003256af067 Oops: 0001 [#1] SMP KASAN Modules linked in: vivid videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops v4l2_tpg v4l2_dv_timings videobuf2_v4l2 videobuf2_common v4l2_common videodev xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill ecdh_generic binfmt_misc snd_hda_codec_hdmi intel_rapl x86_pkg_temp_thermal intel_powerclamp i915 coretemp snd_hda_intel snd_hda_codec kvm_intel snd_hwdep snd_hda_core kvm snd_pcm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_midi ghash_clmulni_intel snd_seq_midi_event i2c_algo_bit intel_cstate snd_rawmidi intel_uncore snd_seq drm_kms_helper e1000e snd_seq_device snd_timer intel_rapl_perf drm ptp snd mei_me mei lpc_ich pps_core soundcore video crc32c_intel CPU: 0 PID: 8713 Comm: v4l2-compliance Tainted: G B 4.16.0-rc4+ #108 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 RIP: 0010:__put_v4l2_format32+0x98/0x4d0 [videodev] RSP: 0018:ffff8803b9be7d30 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8803ac983e80 RCX: ffffffff8cd929f2 RDX: 1ffffffff1d0a149 RSI: 0000000000000297 RDI: 0000000000000297 RBP: 00000000ffe485c0 R08: fffffbfff1cf5123 R09: ffffffff8e7a8948 R10: 0000000000000001 R11: fffffbfff1cf5122 R12: 00000000ffe483e0 R13: 00000000ffe485c4 R14: ffff8803ac985918 R15: 00000000ffe483e8 FS: 0000000000000000(0000) GS:ffff880407400000(0063) knlGS:00000000f7a46980 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000ffe48400 CR3: 00000003a83f2003 CR4: 00000000003606f0 Call Trace: v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev] ? __fsnotify_inode_delete+0x20/0x20 ? __put_v4l2_format32+0x4d0/0x4d0 [videodev] compat_SyS_ioctl+0x646/0x14d0 ? do_ioctl+0x30/0x30 do_fast_syscall_32+0x191/0x3f4 entry_SYSENTER_compat+0x6b/0x7a Code: 4c 89 f7 4d 8d 7c 24 08 e8 e6 a4 69 cb 48 8b 83 98 1a 00 00 48 83 e8 10 49 39 c7 0f 87 9d 01 00 00 49 8d 7c 24 20 e8 c8 a4 69 cb <4d> 8b 74 24 20 4c 89 ef 4c 89 fe ba 10 00 00 00 e8 23 d9 08 cc RIP: __put_v4l2_format32+0x98/0x4d0 [videodev] RSP: ffff8803b9be7d30 CR2: 00000000ffe48400 cc: stable@vger.kernel.org Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Phil Elwell authored
[ Upstream commit 4bfc3380 ] lan78xx_read_otp tries to return -EINVAL in the event of invalid OTP content, but the value gets overwritten before it is returned and the read goes ahead anyway. Make the read conditional as it should be and preserve the error code. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
Phil Elwell <phil@raspberrypi.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Auger authored
[ Upstream commit 7ced6c98 ] vhost_copy_to_user is used to copy vring used elements to userspace. We should use VHOST_ADDR_USED instead of VHOST_ADDR_DESC. Fixes: f8894913 ("vhost: introduce O(1) vq metadata cache") Signed-off-by:
Eric Auger <eric.auger@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Acked-by:
-
Stefan Hajnoczi authored
[ Upstream commit d14d2b78 ] Commit d65026c6 ("vhost: validate log when IOTLB is enabled") introduced a regression. The logic was originally: if (vq->iotlb) return 1; return A && B; After the patch the short-circuit logic for A was inverted: if (A || vq->iotlb) return A; return B; This patch fixes the regression by rewriting the checks in the obvious way, no longer returning A when vq->iotlb is non-NULL (which is hard to understand). Reported-by: syzbot+65a84dde0214b0387ccd@syzkaller.appspotmail.com Cc: Jason Wang <jasowang@redhat.com> Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Acked-by:
-
Tejaswi Tanikella authored
[ Upstream commit 3f01ddb9 ] On receiving a packet the state index points to the rstate which must be used to fill up IP and TCP headers. But if the state index points to a rstate which is unitialized, i.e. filled with zeros, it gets stuck in an infinite loop inside ip_fast_csum trying to compute the ip checsum of a header with zero length. 89.666953: <2> [<ffffff9dd3e94d38>] slhc_uncompress+0x464/0x468 89.666965: <2> [<ffffff9dd3e87d88>] ppp_receive_nonmp_frame+0x3b4/0x65c 89.666978: <2> [<ffffff9dd3e89dd4>] ppp_receive_frame+0x64/0x7e0 89.666991: <2> [<ffffff9dd3e8a708>] ppp_input+0x104/0x198 89.667005: <2> [<ffffff9dd3e93868>] pppopns_recv_core+0x238/0x370 89.667027: <2> [<ffffff9dd4428fc8>] __sk_receive_skb+0xdc/0x250 89.667040: <2> [<ffffff9dd3e939e4>] pppopns_recv+0x44/0x60 89.667053: <2> [<ffffff9dd4426848>] __sock_queue_rcv_skb+0x16c/0x24c 89.667065: <2> [<ffffff9dd4426954>] sock_queue_rcv_skb+0x2c/0x38 89.667085: <2> [<ffffff9dd44f7358>] raw_rcv+0x124/0x154 89.667098: <2> [<ffffff9dd44f7568>] raw_local_deliver+0x1e0/0x22c 89.667117: <2> [<ffffff9dd44c8ba0>] ip_local_deliver_finish+0x70/0x24c 89.667131: <2> [<ffffff9dd44c92f4>] ip_local_deliver+0x100/0x10c ./scripts/faddr2line vmlinux slhc_uncompress+0x464/0x468 output: ip_fast_csum at arch/arm64/include/asm/checksum.h:40 (inlined by) slhc_uncompress at drivers/net/slip/slhc.c:615 Adding a variable to indicate if the current rstate is initialized. If such a packet arrives, move to toss state. Signed-off-by:
Tejaswi Tanikella <tejaswit@codeaurora.org> Signed-off-by:
-
