- 15 Nov, 2008 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: improve phantom device detection
-
Linus Torvalds authored
We don't want to get rid of the futexes just at exit() time, we want to drop them when doing an execve() too, since that gets rid of the previous VM image too. Doing it at mm_release() time means that we automatically always do it when we disassociate a VM map from the task. Reported-by: pageexec@freemail.hu Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Nick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Brad Spengler <spender@grsecurity.net> Cc: Alex Efros <powerman@powerman.name> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
- 14 Nov, 2008 1 commit
-
-
Tejun Heo authored
Currently libata uses four methods to detect device presence. 1. PHY status if available. 2. TF register R/W test (only promotes presence, never demotes) 3. device signature after reset 4. IDENTIFY failure detection in SFF state machine Combination of the above works well in most cases but recently there have been a few reports where a phantom device causes unnecessary delay during probe. In both cases, PHY status wasn't available. In one case, it passed #2 and #3 and failed IDENTIFY with ATA_ERR which didn't qualify as #4. The other failed #2 but as it passed #3 and #4, it still caused failure. In both cases, phantom device reported diagnostic failure, so these cases can be safely worked around by considering any !ATA_DRQ IDENTIFY failure as NODEV_HINT if diagnostic failure is set. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
- 13 Nov, 2008 37 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (25 commits) USB: net: asix: add support for Cables-to-Go USB Ethernet adapter USB: gadget: cdc-acm deadlock fix USB: EHCI: fix divide-by-zero bug USB: EHCI: fix handling of dead controllers usb: r8a66597-hcd: fix wrong data access in SuperH on-chip USB ub: stub pre_reset and post_reset to fix oops USB: SISUSB2VGA driver: add 0x0711, 0x0903 usb: unusual devs patch for Nokia 7610 Supernova USB: remove optional bus bindings in isp1760, fixing runtime warning + usb-serial-cp2101-add-enfora-gsm2228.patch added to -mm tree USB: storage: adjust comment in Kconfig USB: Fix PS3 USB shutdown problems USB: unusual_devs entry for Argosy USB mass-storage interface USB: cdc-acm.c: fix recursive lock in acm_start_wb error path USB: CP2101 Add device ID for AMB2560 USB: mention URB_FREE_BUFFER in usb_free_urb documentation USB: Add YISO u893 usb modem vendor and product IDs to option driver usb: musb: fix BULK request on different available endpoints usb: musb: fix debug global variable name usb: musb: Removes compilation warning in gadget mode ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm: avoid destroying table in dm_any_congested dm: move pending queue wake_up end_io_acct dm mpath: warn if args ignored dm mpath: avoid attempting to activate null path dm stripe: fix init failure dm raid1: flush workqueue before destruction
-
Chandra Seetharaman authored
dm_any_congested() just checks for the DMF_BLOCK_IO and has no code to make sure that suspend waits for dm_any_congested() to complete. This patch adds such a check. Without it, a race can occur with dm_table_put() attempting to destroying the table in the wrong thread, the one running dm_any_congested() which is meant to be quick and return immediately. Two examples of problems: 1. Sleeping functions called from congested code, the caller of which holds a spin lock. 2. An ABBA deadlock between pdflush and multipathd. The two locks in contention are inode lock and kernel lock. Signed-off-by:
Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com>
-
Mikulas Patocka authored
This doesn't fix any bug, just moves wake_up immediately after decrementing md->pending, for better code readability. It must be clear to anyone manipulating md->pending to wake up the queue if md->pending reaches zero, so move the wakeup as close to the decrementing as possible. Signed-off-by:
-
Chandra Seetharaman authored
Currently dm ignores the parameters provided to hardware handlers without providing any notifications to the user. This patch just prints a warning message so that the user knows that the arguments are ignored. Signed-off-by:
-
Chandra Seetharaman authored
Path activation code is called even when the pgpath is NULL. This could lead to a panic in activate_path(). Such a panic is seen in -rt kernel. This problem has been there before the pg_init() was moved to a workqueue. Signed-off-by:
-
Heinz Mauelshagen authored
Don't proceed if dm_stripe_init() fails to register itself as a dm target. Signed-off-by:
Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
We queue work on keventd queue --- so this queue must be flushed in the destructor. Otherwise, keventd could access mirror_set after it was freed. Signed-off-by:
-
Jason Cooper authored
Add support to drivers/net/usb/asix.c for the Cables-to-Go "USB 2.0 to 10/100 Ethernet Adapter". USB id 0b95:772a. Signed-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
This fixes a deadlock appearing with some USB peripheral drivers when running CDC ACM gadget code. The newish (2.6.27) CDC ACM event notification mechanism sends messages (IN to the host) which are short enough to fit in most FIFOs. That means that with some peripheral controller drivers (evidently not the ones used to verify the notification code!!) the completion callback can be issued before queue() returns. The deadlock would come because the completion callback and the event-issuing code shared a spinlock. Fix is trivial: drop that lock while queueing the message. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> Signed-off-by:
-
Alan Stern authored
This patch (as1164) fixes a bug in the EHCI scheduler. The interval value it uses is already in linear format, not logarithmically coded. The existing code can sometimes crash the system by trying to divide by zero. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Cc: Stable <stable@kernel.org> Signed-off-by:
-
Alan Stern authored
This patch (as1165) makes a few small changes in the logic used by ehci-hcd when it encounters a controller error: Instead of printing out the masked status, it prints the original status as read directly from the hardware. It doesn't check for the STS_HALT status bit before taking action. The mere fact that the STS_FATAL bit is set means that something bad has happened and the controller needs to be reset. With the old code this test could never succeed because the STS_HALT bit was masked out from the status. I anticipate that this will prevent the occasional "irq X: nobody cared" problem people encounter when their EHCI controllers die. Signed-off-by:
-
Yoshihiro Shimoda authored
When I used SuperH on-chip USB, there was the problem that accessed r8a66597_root_hub which was not allocated. Signed-off-by:
Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by:
-
Pete Zaitcev authored
Due to recent changes to usb_reset_device, the following hang occurs: events/0 D 0000000000000000 0 6 2 ffff880037477cc0 0000000000000046 ffff880037477c50 ffffffff80237434 ffffffff80574c80 00000001000a015c 0000000000000286 ffff8800374757d0 ffff88002a31c860 ffff880037475a00 0000000036779140 ffff880037475a00 Call Trace: [<ffffffff80237434>] try_to_del_timer_sync+0x52/0x5b [<ffffffff8026f86c>] dma_pool_free+0x1a7/0x1ec [<ffffffffa02a928a>] ub_disconnect+0x8e/0x1ad [ub] [<ffffffff802407c9>] autoremove_wake_function+0x0/0x2e [<ffffffff80378959>] usb_unbind_interface+0x5c/0xb7 [<ffffffff8036ab70>] __device_release_driver+0x95/0xbd [<ffffffff8036ac70>] device_release_driver+0x21/0x2d [<ffffffff803789f8>] usb_driver_release_interface+0x44/0x83 [<ffffffff80378ab9>] usb_forced_unbind_intf+0x17/0x1d [<ffffffff80371ba4>] usb_reset_device+0x7d/0x114 [<ffffffffa02aaffd>] ub_reset_task+0x0/0x293 [ub] [<ffffffffa02ab1c1>] ub_reset_task+0x1c4/0x293 [ub] [<ffffffff8033dd1e>] flush_to_ldisc+0x0/0x1cd [<ffffffffa02aaffd>] ub_reset_task+0x0/0x293 [ub] [<ffffffff8023d302>] run_workqueue+0x87/0x114 [<ffffffff8023d467>] worker_thread+0xd8/0xe7 [<ffffffff802407c9>] autoremove_wake_function+0x0/0x2e [<ffffffff8023d38f>] worker_thread+0x0/0xe7 [<ffffffff802404c1>] kthread+0x47/0x73 [<ffffffff8022c8dd>] schedule_tail+0x27/0x60 [<ffffffff8020c249>] child_rip+0xa/0x11 [<ffffffff8024047a>] kthread+0x0/0x73 [<ffffffff8020c23f>] child_rip+0x0/0x11 This is because usb_reset_device now unbinds, and that calls disconnect, which in case of ub waits until the reset completes... which deadlocks. Worse, this deadlocks keventd and this takes whole box down. I'm going to fix this properly later, but let's unbreak the driver quickly for non-composite devices at least. Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Albert Comerma authored
Signed-off-by:
Albert Comerma <albert.comerma@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Brownell <david-b@pacbell.net> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Ricky Wong authored
Additional sectors were reported by the Nokia 7610 Supernova phone in usb storage mode. The following patch rectifies the aforementioned problem. Signed-off-by:
Ricky Wong Yung Fei <evilbladewarrior@gmail.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
Roland Reported the following: | kmem_cache_create: duplicate cache isp1760_qtd | Pid: 461, comm: modprobe Tainted: G W 2.6.28-rc2-git3-default #4 | Call Trace: | [<c017540e>] kmem_cache_create+0xc9/0x3a3 | [<c0159a8d>] free_pages_bulk+0x16c/0x1c9 | [<f165c05f>] isp1760_init+0x0/0xb [isp1760] | [<f165c018>] init_kmem_once+0x18/0x5f [isp1760] | [<f165c064>] isp1760_init+0x5/0xb [isp1760] | [<c010113d>] _stext+0x4d/0x148 | [<c0142936>] load_module+0x12cd/0x142e | [<c01743c4>] kmem_cache_destroy+0x0/0xd7 | [<c0142b1e>] sys_init_module+0x87/0x176 | [<c01039eb>] sysenter_do_call+0x12/0x2f The reason, is that ret is initialized with ENODEV instead of 0 _or_ the kmem cache is not freed in error case with no bus binding. The difference between OF+PCI and OF only is | 15148 804 32 15984 3e70 isp1760-of-pci.o | 13748 676 8 14432 3860 isp1760-of.o about 1.5 KiB. Until there is a checkbox where the user *must* select atleast one item, and may select multiple entries I don't make it selectable anymore. Having a driver which can't be used under any circumstances is broken anyway and I've seen distros shipping it that way. Reported-by:
Roland Kletzing <devzero@web.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>a Cc: stable <stable@kernel.org> Signed-off-by:
-
Damir N Abdullin authored
Enfora GSM2228 based on Cygnal Integrated Products chip uses the same cp2101 driver. Signed-off-by:
Damir N Abdullin <damir@mimas.ru> Signed-off-by:
-
Paul Bolle authored
Since commit 65934a9a ("Make USB storage depend on SCSI rather than selecting it [try #6]") the comment at the top of drivers/usb/storage/Kconfig is incorrect. Adjust it to the current situation. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by:
-
Geoff Levand authored
Add ehci_shutdown() or ohci_shutdown() calls to the USB PS3 bus glue. ehci_shutdown() and ohci_shutdown() do some controller specific cleanups not done by usb_remove_hcd(). Fixes errors on shutdown or reboot similar to these: ps3-ehci-driver sb_07: HC died; cleaning up irq 51: nobody cared (try booting with the "irqpoll" option) Related bugzilla reports: http://bugzilla.kernel.org/show_bug.cgi?id=11819 http://bugzilla.terrasoftsolutions.com/show_bug.cgi?id=317Signed-off-by:
Geoff Levand <geoffrey.levand@am.sony.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Alan Stern authored
This patch (as1162) adds an unusual_devs entry for Argosy's USB-IDE interface. This fixes Bugzilla #11843. Signed-off-by:
Luciano Rocha <luciano@eurotux.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Brandon Philips authored
Fixes an obvious bug in cdc-acm by avoiding a recursive lock on acm_start_wb()'s error path. Should apply towards 2.6.27 stable and 2.6.28. ============================================= [ INFO: possible recursive locking detected ] 2.6.27-2-pae #109 --------------------------------------------- python/31449 is trying to acquire lock: (&acm->write_lock){++..}, at: [<f89a0348>] acm_start_wb+0x5c/0x7b [cdc_acm] but task is already holding lock: (&acm->write_lock){++..}, at: [<f89a04fb>] acm_tty_write+0xe1/0x167 [cdc_acm] other info that might help us debug this: 2 locks held by python/31449: #0: (&tty->atomic_write_lock){--..}, at: [<c0260fae>] tty_write_lock+0x14/0x3b #1: (&acm->write_lock){++..}, at: [<f89a04fb>] acm_tty_write+0xe1/0x167 [cdc_acm] stack backtrace: Pid: 31449, comm: python Not tainted 2.6.27-2-pae #109 [<c030f42f>] ? printk+0xf/0x18 [<c0149f33>] __lock_acquire+0xc7b/0x1316 [<c014a63e>] lock_acquire+0x70/0x97 [<f89a0348>] ? acm_start_wb+0x5c/0x7b [cdc_acm] [<c0312109>] _spin_lock_irqsave+0x37/0x47 [<f89a0348>] ? acm_start_wb+0x5c/0x7b [cdc_acm] [<f89a0348>] acm_start_wb+0x5c/0x7b [cdc_acm] [<f89a055d>] acm_tty_write+0x143/0x167 [cdc_acm] [<c0262a98>] write_chan+0x1cd/0x297 [<c012527e>] ? default_wake_function+0x0/0xd [<c026111e>] tty_write+0x149/0x1b9 [<c02628cb>] ? write_chan+0x0/0x297 [<c01912c5>] ? rw_verify_area+0x76/0x98 [<c0260fd5>] ? tty_write+0x0/0x1b9 [<c01919ba>] vfs_write+0x8c/0x136 [<c0191afd>] sys_write+0x3b/0x60 [<c0103beb>] sysenter_do_call+0x12/0x3f ======================= Signed-off-by:Brandon Philips <bphilips@suse.de> Cc: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Signed-off-by:
-
Craig Shelley authored
This patch adds the device vendor and product IDs for Amber Wireless AMB2560 Signed-off-by:
Craig Shelley <craig@microtron.org.uk> Signed-off-by:
-
Rabin Vincent authored
The usb_free_urb comment says that the transfer buffer will not be freed, but this is not the case when URB_FREE_BUFFER is set. Signed-off-by:
Rabin Vincent <rabin@rab.in> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Leslie Watter authored
This patch adds YISO u893 usb modem vendor and product ID to option.c. I had a better experience using this modification and the same system. Signed-off-by:
Leslie Harlley Watter <leslie@watter.org> Signed-off-by:
-
Ajay Kumar Gupta authored
Fixes co-working issue of usb serial device with usb/net devices while oter endpoints are free and can be used.This patch implements the policy that if endpoint resources are available then different BULK request goes to different endpoint otherwise they are multiplexed to one reserved endpoint as currently done. Switch statement case is reordered in musb_giveback() to take care of bulk request both in multiplex scenario and otherwise. NAK limit scheme has to be added for multiplexed BULK request scenario to avoid endpoint starvation due to usb/net devices. Signed-off-by:
Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by:
Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by:
-
Felipe Balbi authored
In order to avoid namespace conflicts, add a prefix to our kernel-wise symbol. Signed-off-by:
-
Ajay Kumar Gupta authored
Fixes compilation warning when musb is configured in gadget mode. Signed-off-by:
-
Felipe Balbi authored
Add an errno to failing case. Signed-off-by:
-
Ajay Kumar Gupta authored
Fixes blurred capture images in dma mode. Isochronous error field in urb and source data buffer pointer were not updated properly in dma mode. Signed-off-by:
-
Alan Stern authored
This patch (as1155) fixes a bug in usbcore. When interfaces are deleted, either because the device was disconnected or because of a configuration change, the extra attribute files and child endpoint devices may get left behind. This is because the core removes them before calling device_del(). But during device_del(), after the driver is unbound the core will reinstall altsetting 0 and recreate those extra attributes and children. The patch prevents this by adding a flag to record when the interface is in the midst of being unregistered. When the flag is set, the attribute files and child devices will not be created. Signed-off-by:
-
Paul Ready authored
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11685 When A Nikon D300 camera is connected to a system it is seen in /proc/bus/pci/devices but is not accessible. This is seen in the above file: T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=03 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=04b0 ProdID=041a Rev= 1.03 S: Manufacturer=NIKON S: Product=NIKON DSC D300 S: SerialNumber=000008014379 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=usbfs E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Greg Kroah-Hartman authored
This fixes a reported compiler warning. Reported-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: ignore bit0 of _OSC return code
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlmLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: fix shutdown cleanup
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slab: document SLAB_DESTROY_BY_RCU Kconfig: SLUB is the default slab allocator
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] cdb89712: avoid namespace clashes with SRAM_ and BOOTROM_ constants [ARM] cdb89712,clps7500,h720x: avoid namespace clash for FLASH_* constants [ARM] integrator,realview,versatile: remove FLASH_* and EPROM_* constants [ARM] dma-mapping: fix compiler warning [ARM] iop: iop3xx needs registers mapped uncached+unbuffered [ARM] versatile: correct MMC clock rate [ARM] realview: correct MMC clock rate [ARM] 5329/1: Feroceon: fix feroceon_l2_inv_range
-
