It causes crashes when enabled, and we don't have such a peripheral
anyway on ARC platforms.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: Nol "Mag" Archinova <magissia@magissia.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The signatures of v3 and v4 packets change depending on the value of a
hardware flag called 'crc_enabled'. The packet type detection must change
accordingly.

This patch also restores a consistency check for v4 packets inadvertently
removed by commit:

9eebed7d
Input: elantech - fix for newer hardware versions (v7)

A note about the naming convention: v3 hardware is associated with IC body
v5 while v4 hardware is associated with IC body v6 and v7. The above commit
refers to IC body v7, not to v7 hardware.

Tested on Samsung NP730U3E (fw = 0x675f05, ICv7, crc_enabled = 1)
Tested-by: Giovanni Frigione <gio.frigione@gmail.com>
Signed-off-by: Matteo Delfino <kendatsuba@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Tested-by: Arjuna Rao Chavala <arjunaraoc@gmail.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Bring in second round of updates for 3.11.

Signed-off-by: Daniel Tang <dt.tangr@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

* Fix version recognition in elantech_set_properties

  The new hardware reports itself as v7 but the packets'
  structure is unaltered.

* Fix packet type recognition in elantech_packet_check_v4

  The bitmask used for v6 is too wide, only the last three bits of
  the third byte in a packet (packet[3] & 0x03) are actually used to
  distinguish between packet types.
  Starting from v7, additional information (to be interpreted) is
  stored in the remaining bits (packets[3] & 0x1c).
  In addition, the value stored in (packet[0] & 0x0c) is no longer
  a constant but contains additional information yet to be deciphered.
  This change should be backwards compatible with v6 hardware.

Additional-author: Giovanni Frigione <gio.frigione@gmail.com>
Signed-off-by: Matteo Delfino <kendatsuba@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

In TSG4, register map is 512bytes long and to access all of it,
one bit from address byte is used (which bit to use differs for
I2C and SPI);

Since common code used for TSG3 and TSG4 for I2C, this parameter
wrongly used as u8. TSG3 does not access beyond 255 bytes
but TSG4 may.

Tested-on:TMA3XX DVB && TMA4XX DVB
Signed-off-by: Ferruh Yigit <fery@cypress.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If probe() fails after cd->xfer_buf allocated, it will not freed.
Added kfree(cd->xfer_buf) with and error label.
Signed-off-by: Ferruh Yigit <fery@cypress.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Since the driver was converted to polled device infrastructure we need
to make sure it is enabled.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Let's declare platform data a const pointer so that we don't accitentally
change it. Also fetch it with dev_get_platdata().
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The June 2013 Macbook Air (13'') has a new trackpad protocol; four new
values are inserted in the header, and the mode switch is no longer
needed. This patch adds support for the new devices.

Cc: stable@vger.kernel.org
Reported-and-tested-by: Brad Ford <plymouthffl@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This patch adds keyboard support for MacbookAir6,2 as WELLSPRING8
(0x0291, 0x0292, 0x0293). The touchpad is handled in a separate
bcm5974 patch, as usual.

Cc: stable@vger.kernel.org
Reported-and-tested-by: Brad Ford <plymouthffl@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We leak "cd" if the cd->xfer_buf allocation fails.  It was weird to
"goto error_gpio_irq" so I changed the label name.  (Label names should
reflect the label location not the goto location otherwise you get an
"all roads lead to Rome problem").
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If "cd" were NULL then we would dereference it when we print the error
message.  Fortunately enough, it can't ever be NULL so we can remove
those lines.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

"*max" is a size_t (long) type but "1" is an int so static checkers
complain that the shift could wrap.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Prepare first set of updates for 3.11 merge window.

There is no need to roll our own polling scheme when we already have
one implemented by the core.
Tested-by: Manish Badarkhe <badarkhe.manish@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The vref field was not used by the driver and was removed from the
platform data structure.
Signed-off-by: Manish Badarkhe <badarkhe.manish@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Cypress TrueTouch(tm) Standard Product controllers,
Generation4 devices, SPI adapter module.

This driver adds communication support with TTSP controller
using SPI bus.
Signed-off-by: Ferruh Yigit <fery@cypress.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Cypress TrueTouch(tm) Standard Product controllers,
Generation4 devices, I2C adapter module.

This driver adds communication support with TTSP controller
using I2C bus.
Signed-off-by: Ferruh Yigit <fery@cypress.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Cypress TrueTouch(tm) Standard Product controllers,
Generetion4 devices, Core driver.

Core driver is interface between host and TTSP controller and processes
data sent by controller.

Responsibilities of module are IRQ handling, reading system information
registers and sending multi-touch protocol type B events.
Signed-off-by: Ferruh Yigit <fery@cypress.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Existing I2C code is for TrueTouch Gen3 devices

TrueTouch Gen4 device is using same protocol, will split driver into
two pieces to use common code with both drivers.

Read/Write functions parameter list modified, since shared code will
be used by two separate drivers and these drivers are not sharing same
structs, parameters updated to use common structures.
Signed-off-by: Ferruh Yigit <fery@cypress.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The OLPC XO-1.75 and XO-4 laptops include a PS/2 touchpad and an AT
keyboard, yet they do not have a hardware PS/2 controller. Instead, a
firmware runs on a dedicated core ("Security Processor", part of the SoC)
that acts as a PS/2 controller through bit-banging.

Communication between the main cpu (Application Processor) and the
Security Processor happens via a standard command mechanism implemented
by the SoC. Add a driver for this interface to enable keyboard/mouse
input on this platform.

Original author: Saadia Baloch
Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull in changes from Henrik: "a trivial MT documentation fix".

Although defined in platform data, vref is not used anywhere.

Also remove model, irq, and clear_penirq as they are not used either.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

tsc->polling is write only and the poll local is meaningless
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

With device core now able to setup the default pin configuration,
the pin configuration code based on the deprecated Samsung specific
gpio bindings is removed.
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Added MAP_TRIGGERS_TO_BUTTONS for Mad Catz Street Fighter IV FightPad
device. This controller model was already supported by the xpad
driver, but none of the buttons work correctly without this change.

Tested on kernel version 3.9.5.
Signed-off-by: Shawn Joseph <jms.576@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Although BTN_TOOL_PEN and BTN_TOOL_RUBBER functioned properly, the driver
didn't have hover functionality, so it's been added.

Also, "WACOM_RETRY_CNT" was not used, so it was removed.
Signed-off-by: Tatsunosuke Tobita <tobita.tatsunosuke@wacom.co.jp>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

It should not be changed by the driver, so let's make it const pointer.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

pxa27x-keypad includes matrix keys. Make use of matrix_keymap
for the matrix keys.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This is effectively already in force through input_mt_init_slots, and uinput
too ignores the actual minimum.

Since slots are a kernel-genenerated axis only, non-zero minimums make
little sense and are likely to cause errors. Better to treat a non-zero
minimum as kernel bug if it ever happens.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>

Several drivers don't build on s390 with CONFIG_PCI disabled as
they require MMIO functions.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org # 3.9
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>