Changed 0 to NULL to fix following sparse warnings:

    drivers/hid/hid-thrustmaster.c:208:43: warning: Using plain integer as NULL pointer
    drivers/hid/hid-thrustmaster.c:241:17: warning: Using plain integer as NULL pointer
    drivers/hid/hid-thrustmaster.c:275:37: warning: Using plain integer as NULL pointer
Signed-off-by: Vihas Mak <makvihas@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Battery status is reported for the HP Envy X360 Convertible 15-eu0xxx
even if it does not have a battery. Prevent it from always reporting the
battery as low.
Signed-off-by: Trevor Davenport <trevor.davenport@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

When a scancode is manually remapped that previously was not handled as
key, then the old usage type was incorrectly reused.

This caused issues on a "04b3:301b IBM Corp. SK-8815 Keyboard" which has
marked some of its keys with an invalid HID usage.  These invalid usage
keys are being ignored since support for USB programmable buttons was
added.

The scancodes are however remapped explicitly by the systemd hwdb to the
keycodes that are printed on the physical buttons.  During this mapping
step the existing usage is retrieved which will be found with a default
type of 0 (EV_SYN) instead of EV_KEY.

The events with the correct code but EV_SYN type are not forwarded to
userspace.

This also leads to a kernel oops when trying to print the report descriptor
via debugfs.  hid_resolv_event() tries to resolve a EV_SYN event with an
EV_KEY code which leads to an out-of-bounds access in the EV_SYN names
array.

Fixes: bcfa8d14 ("HID: input: Add support for Programmable Buttons")
Fixes: f5854fad ("Input: hid-input - allow mapping unknown usages")
Reported-by: Brent Roman <brent@mbari.org>
Tested-by: Brent Roman <brent@mbari.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Fix parsing of HID_CP_CONSUMER_CONTROL fields which are not in
the HID_CP_PROGRAMMABLEBUTTONS collection.

Fixes: bcfa8d14 ("HID: input: Add support for Programmable Buttons")
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2018096
Cc: Thomas Weißschuh <linux@weissschuh.net>
Suggested-by: Benjamin Tissoires <btissoir@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-By: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The below scenario causes the kernel NULL pointer dereference failure:
1. sudo insmod hid-ft260.ko
2. sudo modprobe lm75
3. unplug USB hid-ft260
4. plug USB hid-ft260

[  +0.000006] Call Trace:
[  +0.000004]  __i2c_smbus_xfer.part.0+0xd1/0x310
[  +0.000007]  ? ft260_smbus_write+0x140/0x140 [hid_ft260]
[  +0.000005]  __i2c_smbus_xfer+0x2b/0x80
[  +0.000004]  i2c_smbus_xfer+0x61/0xf0
[  +0.000005]  i2c_default_probe+0xf9/0x130
[  +0.000004]  i2c_detect_address+0x84/0x160
[  +0.000004]  ? kmem_cache_alloc_trace+0xf6/0x200
[  +0.000009]  ? i2c_detect.isra.0+0x69/0x130
[  +0.000005]  i2c_detect.isra.0+0xbf/0x130
[  +0.000004]  ? __process_new_driver+0x30/0x30
[  +0.000004]  __process_new_adapter+0x18/0x20
[  +0.000004]  bus_for_each_drv+0x84/0xd0
[  +0.000003]  i2c_register_adapter+0x1e4/0x400
[  +0.000005]  i2c_add_adapter+0x5c/0x80
[  +0.000004]  ft260_probe.cold+0x222/0x2e2 [hid_ft260]
[  +0.000006]  hid_device_probe+0x10e/0x170 [hid]
[  +0.000009]  really_probe+0xff/0x460
[  +0.000004]  driver_probe_device+0xe9/0x160
[  +0.000003]  __device_attach_driver+0x71/0xd0
[  +0.000004]  ? driver_allows_async_probing+0x50/0x50
[  +0.000004]  bus_for_each_drv+0x84/0xd0
[  +0.000002]  __device_attach+0xde/0x1e0
[  +0.000004]  device_initial_probe+0x13/0x20
[  +0.000004]  bus_probe_device+0x8f/0xa0
[  +0.000003]  device_add+0x333/0x5f0

It happened when i2c core probed for the devices associated with the lm75
driver by invoking 2c_detect()-->..-->ft260_smbus_write() from within the
ft260_probe before setting the adapter data with i2c_set_adapdata().

Moving the i2c_set_adapdata() before i2c_add_adapter() fixed the failure.
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Signed-off-by: Germain Hebert <germain.hebert@ca.abb.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This reverts commit 2ea5999d.

As Dmitry Torokhov pointed out, the previous code (KEY_DISPLAY_OFF) is
actually correct. The real issue is that current desktop environments
don't deal it properly. Mapping it to another event does not solve the
issue.

So I'm reverting that change, keeping key 0x35 mapped to KEY_DISPLAY_OFF
Signed-off-by: Vinícius Angiolucci Reis <angiolucci@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

A late addititon to the intel-ish-hid framework caused a build failure
with clang, and introduced an ABI to the module loader that stops working
if any driver ever needs to bind to more than one UUID:

drivers/hid/intel-ish-hid/ishtp-fw-loader.c:1067:4: error: initializer element is not a compile-time constant

Change the ishtp_device_id to have correct documentation and a driver_data
field like all the other ones, and change the drivers to use the ID table
as the primary identification in a way that works with all compilers
and avoids duplciating the identifiers.

Fixes: f155dfea ("platform/x86: isthp_eclite: only load for matching devices")
Fixes: facfe0a4 ("platform/chrome: chros_ec_ishtp: only load for matching devices")
Fixes: 0d0cccc0 ("HID: intel-ish-hid: hid-client: only load for matching devices")
Fixes: 44e2a58c ("HID: intel-ish-hid: fw-loader: only load for matching devices")
Fixes: cb1a2c68 ("HID: intel-ish-hid: use constants for modaliases")
Fixes: fa443bc3 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[jkosina@suse.cz: fix ecl_ishtp_cl_driver.id initialization]
[jkosina@suse.cz: fix conflict with already fixed kerneldoc]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The kdocs were copied from another device_id struct and not adapted.

Fixes: fa443bc3 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The HID descriptor of many of Wacom's touch input devices include a
"Confidence" usage that signals if a particular touch collection contains
useful data. The driver does not look at this flag, however, which causes
even invalid contacts to be reported to userspace. A lucky combination of
kernel event filtering and device behavior (specifically: contact ID 0 ==
invalid, contact ID >0 == valid; and order all data so that all valid
contacts are reported before any invalid contacts) spare most devices from
any visibly-bad behavior.

The DTH-2452 is one example of an unlucky device that misbehaves. It uses
ID 0 for both the first valid contact and all invalid contacts. Because
we report both the valid and invalid contacts, the kernel reports that
contact 0 first goes down (valid) and then goes up (invalid) in every
report. This causes ~100 clicks per second simply by touching the screen.

This patch inroduces new `confidence` flag in our `hid_data` structure.
The value is initially set to `true` at the start of a report and can be
set to `false` if an invalid touch usage is seen.

Link: https://github.com/linuxwacom/input-wacom/issues/270
Fixes: f8b6a747 ("HID: wacom: generic: Support multiple tools per report")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Joshua Dickens <joshua.dickens@wacom.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

These two error paths need to drop the lock before returning.

Fixes: c5e62676 ("HID: nintendo: add player led support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Previously it was loaded for all ISHTP devices.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Previously it was loaded for all ISHTP devices.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Previously it was loaded for all ISHTP devices.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Previously it was loaded for all ISHTP devices.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This allows to selectively autoload drivers for ISH devices.
Currently all ISH drivers are loaded for all systems having any ISH
device.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID updates from Jiri Kosina:

 - support for Nintendo Switch Pro Controllers and Joy-Cons (Daniel J.
   Ogorchock)

 - support for new revision of the NitroKey U2F device firmware (Andrej
   Shadura)

 - LED handling improvements for Sony Playstation5 controllers (Roderick
   Colenbrander)

 - support for Apple 2021 Magic Keyboard (Alex Henrie)

 - other assorted code cleanups and new device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (41 commits)
  HID: nintendo: fix -Werror build
  HID: playstation: require multicolor LED functionality
  HID: u2fzero: properly handle timeouts in usb_submit_urb
  HID: u2fzero: clarify error check and length calculations
  HID: u2fzero: Support NitroKey U2F revision of the device
  HID: wacom: Make use of the helper function devm_add_action_or_reset()
  HID: wacom: Shrink critical section in `wacom_add_shared_data`
  HID: nintendo: prevent needless queueing of the rumble worker
  HID: nintendo: ratelimit subcommands and rumble
  HID: nintendo: improve rumble performance and stability
  HID: nintendo: add IMU support
  HID: nintendo: add support for reading user calibration
  HID: nintendo: add support for charging grip
  HID: nintendo: set controller uniq to MAC
  HID: nintendo: reduce device removal subcommand errors
  HID: nintendo: patch hw version for userspace HID mappings
  HID: nintendo: send subcommands after receiving input report
  HID: nintendo: improve subcommand reliability
  HID: nintendo: add rumble support
  HID: nintendo: add home led support
  ...

Pull pin control updates from Linus Walleij:
 "The most interesting aspect is that we now have initial support for
  the Apple pin controller as used in the M1 laptops and the iPhones
  which is a step forward for using Linux efficiently on this Apple
  silicon.

  Core changes:

   - Add infrastructure for per-parent interrupt data to support the
     Apple pin controller.

  New drivers:

   - New combined pin control and GPIO driver for the Apple SoC. This is
     used in all modern Apple silicon such as the M1 laptops but also in
     at least recent iPhone variants.

   - New subdriver for the Qualcomm SM6350

   - New subdriver for the Qualcomm QCM2290

   - New subdriver for the Qualcomm PM6350

   - New subdriver for the Uniphier NX1

   - New subdriver for the Samsung ExynosAutoV9

   - New subdriver for the Mediatek MT7986

   - New subdriver for the nVidia Tegra194

  Improvements:

   - Improve power management in the Mediatek driver.

   - Improvements to the Renesas internal consistency checker.

   - Convert the Rockchip pin control device tree bindings to YAML.

   - Finally convert the Qualcomm PMIC SSBI and SPMI MPP GPIO driver to
     use hierarchical interrupts.

   - Convert the Qualcomm PMIC MPP device tree bindings to YAML"

* tag 'pinctrl-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (55 commits)
  pinctrl: add pinctrl/GPIO driver for Apple SoCs
  dt-bindings: pinctrl: Add apple,npins property to apple,pinctrl
  dt-bindings: pinctrl: add #interrupt-cells to apple,pinctrl
  gpio: Allow per-parent interrupt data
  pinctrl: tegra: Fix warnings and error
  pinctrl: intel: Kconfig: Add configuration menu to Intel pin control
  pinctrl: tegra: Use correct offset for pin group
  pinctrl: core: fix possible memory leak in pinctrl_enable()
  pinctrl: bcm2835: Allow building driver as a module
  pinctrl: equilibrium: Fix function addition in multiple groups
  pinctrl: tegra: Add pinmux support for Tegra194
  pinctrl: tegra: include lpdr pin properties
  pinctrl: mediatek: add support for MT7986 SoC
  dt-bindings: pinctrl: update bindings for MT7986 SoC
  pinctrl: microchip sgpio: use reset driver
  dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add reset binding
  dt-bindings: pinctrl: qcom,pmic-mpp: switch to #interrupt-cells
  pinctrl: qcom: spmi-mpp: add support for hierarchical IRQ chip
  pinctrl: qcom: spmi-mpp: hardcode IRQ counts
  pinctrl: qcom: ssbi-mpp: add support for hierarchical IRQ chip
  ...

Pull microblaze update from Michal Simek:
 "Remove unused devicetree properties. Sean is pushing one pwm driver
  and these ancient properties are going against agreed DT binding"

* tag 'microblaze-v5.16' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: timer: Remove unused properties

Pull powerpc updates from Michael Ellerman:

 - Enable STRICT_KERNEL_RWX for Freescale 85xx platforms.

 - Activate CONFIG_STRICT_KERNEL_RWX by default, while still allowing it
   to be disabled.

 - Add support for out-of-line static calls on 32-bit.

 - Fix oopses doing bpf-to-bpf calls when STRICT_KERNEL_RWX is enabled.

 - Fix boot hangs on e5500 due to stale value in ESR passed to
   do_page_fault().

 - Fix several bugs on pseries in handling of device tree cache
   information for hotplugged CPUs, and/or during partition migration.

 - Various other small features and fixes.

Thanks to Alexey Kardashevskiy, Alistair Popple, Anatolij Gustschin,
Andrew Donnellan, Athira Rajeev, Bixuan Cui, Bjorn Helgaas, Cédric Le
Goater, Christophe Leroy, Daniel Axtens, Daniel Henrique Barboza, Denis
Kirjanov, Fabiano Rosas, Frederic Barrat, Gustavo A.  R.  Silva, Hari
Bathini, Jacques de Laval, Joel Stanley, Kai Song, Kajol Jain, Laurent
Vivier, Leonardo Bras, Madhavan Srinivasan, Nathan Chancellor, Nathan
Lynch, Naveen N.  Rao, Nicholas Piggin, Nick Desaulniers, Niklas
Schnelle, Oliver O'Halloran, Rob Herring, Russell Currey, Srikar
Dronamraju, Stan Johnson, Tyrel Datwyler, Uwe Kleine-König, Vasant
Hegde, Wan Jiabing, and Xiaoming Ni,

* tag 'powerpc-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (73 commits)
  powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST
  powerpc/32e: Ignore ESR in instruction storage interrupt handler
  powerpc/powernv/prd: Unregister OPAL_MSG_PRD2 notifier during module unload
  powerpc: Don't provide __kernel_map_pages() without ARCH_SUPPORTS_DEBUG_PAGEALLOC
  MAINTAINERS: Update powerpc KVM entry
  powerpc/xmon: fix task state output
  powerpc/44x/fsp2: add missing of_node_put
  powerpc/dcr: Use cmplwi instead of 3-argument cmpli
  KVM: PPC: Tick accounting should defer vtime accounting 'til after IRQ handling
  powerpc/security: Use a mutex for interrupt exit code patching
  powerpc/83xx/mpc8349emitx: Make mcu_gpiochip_remove() return void
  powerpc/fsl_booke: Fix setting of exec flag when setting TLBCAMs
  powerpc/book3e: Fix set_memory_x() and set_memory_nx()
  powerpc/nohash: Fix __ptep_set_access_flags() and ptep_set_wrprotect()
  powerpc/bpf: Fix write protecting JIT code
  selftests/powerpc: Use date instead of EPOCHSECONDS in mitigation-patching.sh
  powerpc/64s/interrupt: Fix check_return_regs_valid() false positive
  powerpc/boot: Set LC_ALL=C in wrapper script
  powerpc/64s: Default to 64K pages for 64 bit book3s
  Revert "powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC"
  ...

Pull MIPS updates from Thomas Bogendoerfer:

 - added printing of CPU options for /proc/cpuinfo

 - removed support for Netlogic SOCs

 - fixes and cleanup

* tag 'mips_5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Cobalt: Explain GT64111 early PCI fixup
  mips: fix HUGETLB function without THP enabled
  mips: cm: Convert to bitfield API to fix out-of-bounds access
  MIPS: Remove NETLOGIC support
  MIPS: kernel: proc: add CPU option reporting
  MIPS: kernel: proc: use seq_puts instead of seq_printf
  MIPS: kernel: proc: fix trivial style errors
  MIPS: Fix assembly error from MIPSr2 code used within MIPS_ISA_ARCH_LEVEL
  MIPS: octeon: Remove unused functions
  MIPS: Loongson64: Add of_node_put() before break
  bcm47xx: Replace printk(KERN_ALERT ... pci_devname(dev)) with pci_alert()
  bcm47xx: Get rid of redundant 'else'
  MIPS: sni: Fix the build
  MIPS: Avoid macro redefinitions
  MIPS: loongson64: Fix no screen display during boot-up
  MIPS: loongson64: make CPU_LOONGSON64 depends on MIPS_FP_SUPPORT

- proper support of Xiaomi Mi buttons (Ilya Skriblovsky)

- improvement of device management handling (Cai Huoqing, Jason Gerecke)

- support for new revision of the NitroKey U2F device firmware
  (Andrej Shadura)

- support for Nintendo Switch Pro Controllers and Joy-Cons (Daniel J. Ogorchock)

- LED handling improvements (Roderick Colenbrander)

- update to handle TransducerSerialNumber2 which has been recently
  added to the specification (Felipe Balbi)

- support for 2021 Magic Keyboard (Alex Henrie)
- tidle key quirk handling improvement (Alex Henrie)

- code cleanups (Basavaraj Natikar, Christophe JAILLET)

Pull HSI update from Sebastian Reichel:
 "cmt_speech: unmark comments as kernel-doc"

* tag 'hsi-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: cmt_speech: unmark comments as kernel-doc

Pull power supply and reset updates from Sebastian Reichel:
 "Miscellaneous small fixes and improvements all over the place.

  Nothing stands out in particular"

* tag 'for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits)
  power: supply: bq25890: Fix initial setting of the F_CONV_RATE field
  power: supply: bq25890: Fix race causing oops at boot
  power: supply: bq27xxx: Fix kernel crash on IRQ handler register error
  power: bq25890: add return values to error messages
  power: supply: axp288-charger: Simplify axp288_get_charger_health()
  power: supply: axp288-charger: Remove unnecessary is_present and is_online helpers
  power: supply: axp288-charger: Add depends on IOSF_MBIO to Kconfig
  power: supply: ab8500_bmdata: Use standard phandle
  dt-bindings: power: supply: ab8500: Standard monitored-battery
  power: supply: axp288_charger: Fix missing mutex_init()
  power: supply: max17042_battery: Prevent int underflow in set_soc_threshold
  power: supply: max17042_battery: Clear status bits in interrupt handler
  MAINTAINERS: power: supply: max17040: add entry with reviewers
  MAINTAINERS: power: supply: max17042: add entry with reviewers
  power: supply: max17040: fix null-ptr-deref in max17040_probe()
  power: supply: rt5033_battery: Change voltage values to µV
  power: supply: axp288-charger: Optimize register reading method
  dt-bindings: power: Bindings for Samsung batteries
  power: supply: cpcap-battery: use device_get_match_data() to simplify code
  power: supply: max17042_battery: fix typo in MAX17042_IAvg_empty
  ...

Pull more parisc architecture fixes and updates from Helge Deller:
 "One build error fix and two optimizations:

   - Fix build error by moving the CPU field back into thread_info
     struct (Ard Biesheuvel)

   - Do not enable IRQs unconditionally at start of interrupt handler if
     they were disabled before (Sven Schnelle)

   - Keep interrupts enabled during cmpxchg and futex operations (Dave
     Anglin)"

* tag 'for-5.16/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: move CPU field back into thread_info
  parisc: Don't disable interrupts in cmpxchg and futex operations
  parisc: don't enable irqs unconditionally in handle_interruption()

Pull iommu updates from Joerg Roedel:

 - Intel IOMMU Updates fro Lu Baolu:
     - Dump DMAR translation structure when DMA fault occurs
     - An optimization in the page table manipulation code
     - Use second level for GPA->HPA translation
     - Various cleanups

 - Arm SMMU Updates from Will
     - Minor optimisations to SMMUv3 command creation and submission
     - Numerous new compatible string for Qualcomm SMMUv2 implementations

 - Fixes for the SWIOTLB based implemenation of dma-iommu code for
   untrusted devices

 - Add support for r8a779a0 to the Renesas IOMMU driver and DT matching
   code for r8a77980

 - A couple of cleanups and fixes for the Apple DART IOMMU driver

 - Make use of generic report_iommu_fault() interface in the AMD IOMMU
   driver

 - Various smaller fixes and cleanups

* tag 'iommu-updates-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (35 commits)
  iommu/dma: Fix incorrect error return on iommu deferred attach
  iommu/dart: Initialize DART_STREAMS_ENABLE
  iommu/dma: Use kvcalloc() instead of kvzalloc()
  iommu/tegra-smmu: Use devm_bitmap_zalloc when applicable
  iommu/dart: Use kmemdup instead of kzalloc and memcpy
  iommu/vt-d: Avoid duplicate removing in __domain_mapping()
  iommu/vt-d: Convert the return type of first_pte_in_page to bool
  iommu/vt-d: Clean up unused PASID updating functions
  iommu/vt-d: Delete dev_has_feat callback
  iommu/vt-d: Use second level for GPA->HPA translation
  iommu/vt-d: Check FL and SL capability sanity in scalable mode
  iommu/vt-d: Remove duplicate identity domain flag
  iommu/vt-d: Dump DMAR translation structure when DMA fault occurs
  iommu/vt-d: Do not falsely log intel_iommu is unsupported kernel option
  iommu/arm-smmu-qcom: Request direct mapping for modem device
  iommu: arm-smmu-qcom: Add compatible for QCM2290
  dt-bindings: arm-smmu: Add compatible for QCM2290 SoC
  iommu/arm-smmu-qcom: Add SM6350 SMMU compatible
  dt-bindings: arm-smmu: Add compatible for SM6350 SoC
  iommu/arm-smmu-v3: Properly handle the return value of arm_smmu_cmdq_build_cmd()
  ...

Pull tty / serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver updates for 5.16-rc1.

  Nothing major in here at all, just lots of tiny serial and tty driver
  updates for various reported things, and some good cleanups. These
  include:

   - more good tty api cleanups from Jiri

   - stm32 serial driver updates

   - softlockup fix for non-preempt systems under high serial load

   - rpmsg serial driver update

   - 8250 drivers updates and fixes

   - n_gsm line discipline fixes and updates as people are finally
     starting to use it.

  All of these have been in linux-next for a while now with no reported
  issues"

* tag 'tty-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (86 commits)
  tty: Fix extra "not" in TTY_DRIVER_REAL_RAW description
  serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE
  tty: rpmsg: Define tty name via constant string literal
  tty: rpmsg: Add pr_fmt() to prefix messages
  tty: rpmsg: Use dev_err_probe() in ->probe()
  tty: rpmsg: Unify variable used to keep an error code
  tty: rpmsg: Assign returned id to a local variable
  serial: stm32: push DMA RX data before suspending
  serial: stm32: terminate / restart DMA transfer at suspend / resume
  serial: stm32: rework RX dma initialization and release
  serial: 8250_pci: Remove empty stub pci_quatech_exit()
  serial: 8250_pci: Replace custom pci_match_id() implementation
  serial: xilinx_uartps: Fix race condition causing stuck TX
  serial: sunzilog: Mark sunzilog_putchar() __maybe_unused
  Revert "tty: hvc: pass DMA capable memory to put_chars()"
  Revert "virtio-console: remove unnecessary kmemdup()"
  serial: 8250_pci: Replace dev_*() by pci_*() macros
  serial: 8250_pci: Get rid of redundant 'else' keyword
  serial: 8250_pci: Refactor the loop in pci_ite887x_init()
  tty: add rpmsg driver
  ...

Merge tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the big set of driver core changes for 5.16-rc1.

  All of these have been in linux-next for a while now with no reported
  problems.

  Included in here are:

   - big update and cleanup of the sysfs abi documentation files and
     scripts from Mauro. We are almost at the place where we can
     properly check that the running kernel's sysfs abi is documented
     fully.

   - firmware loader updates

   - dyndbg updates

   - kernfs cleanups and fixes from Christoph

   - device property updates

   - component fix

   - other minor driver core cleanups and fixes"

* tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (122 commits)
  device property: Drop redundant NULL checks
  x86/build: Tuck away built-in firmware under FW_LOADER
  vmlinux.lds.h: wrap built-in firmware support under FW_LOADER
  firmware_loader: move struct builtin_fw to the only place used
  x86/microcode: Use the firmware_loader built-in API
  firmware_loader: remove old DECLARE_BUILTIN_FIRMWARE()
  firmware_loader: formalize built-in firmware API
  component: do not leave master devres group open after bind
  dyndbg: refine verbosity 1-4 summary-detail
  gpiolib: acpi: Replace custom code with device_match_acpi_handle()
  i2c: acpi: Replace custom function with device_match_acpi_handle()
  driver core: Provide device_match_acpi_handle() helper
  dyndbg: fix spurious vNpr_info change
  dyndbg: no vpr-info on empty queries
  dyndbg: vpr-info on remove-module complete, not starting
  device property: Add missed header in fwnode.h
  Documentation: dyndbg: Improve cli param examples
  dyndbg: Remove support for ddebug_query param
  dyndbg: make dyndbg a known cli param
  dyndbg: show module in vpr-info in dd-exec-queries
  ...

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char and misc and other tiny driver subsystem
  updates for 5.16-rc1.

  Loads of things in here, all of which have been in linux-next for a
  while with no reported problems (except for one called out below.)

  Included are:

   - habanana labs driver updates, including dma_buf usage, reviewed and
     acked by the dma_buf maintainers

   - iio driver update (going through this tree not staging as they
     really do not belong going through that tree anymore)

   - counter driver updates

   - hwmon driver updates that the counter drivers needed, acked by the
     hwmon maintainer

   - xillybus driver updates

   - binder driver updates

   - extcon driver updates

   - dma_buf module namespaces added (will cause a build error in arm64
     for allmodconfig, but that change is on its way through the drm
     tree)

   - lkdtm driver updates

   - pvpanic driver updates

   - phy driver updates

   - virt acrn and nitr_enclaves driver updates

   - smaller char and misc driver updates"

* tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits)
  comedi: dt9812: fix DMA buffers on stack
  comedi: ni_usb6501: fix NULL-deref in command paths
  arm64: errata: Enable TRBE workaround for write to out-of-range address
  arm64: errata: Enable workaround for TRBE overwrite in FILL mode
  coresight: trbe: Work around write to out of range
  coresight: trbe: Make sure we have enough space
  coresight: trbe: Add a helper to determine the minimum buffer size
  coresight: trbe: Workaround TRBE errata overwrite in FILL mode
  coresight: trbe: Add infrastructure for Errata handling
  coresight: trbe: Allow driver to choose a different alignment
  coresight: trbe: Decouple buffer base from the hardware base
  coresight: trbe: Add a helper to pad a given buffer area
  coresight: trbe: Add a helper to calculate the trace generated
  coresight: trbe: Defer the probe on offline CPUs
  coresight: trbe: Fix incorrect access of the sink specific data
  coresight: etm4x: Add ETM PID for Kryo-5XX
  coresight: trbe: Prohibit trace before disabling TRBE
  coresight: trbe: End the AUX handle on truncation
  coresight: trbe: Do not truncate buffer on IRQ
  coresight: trbe: Fix handling of spurious interrupts
  ...

Pull staging driver updates from Greg KH:
 "Here is the big set of staging driver updates and cleanups for
  5.16-rc1.

  Overall we ended up removing a lot of code this time, a bit over
  20,000 lines are now gone thanks to a lot of cleanup work by many
  developers.

  Nothing huge in here functionality wise, just loads of cleanups:

   - r8188eu driver major cleanups and removal of unused and dead code

   - wlan-ng minor cleanups

   - fbtft driver cleanups

   - most driver cleanups

   - rtl8* drivers cleanups

   - rts5208 driver cleanups

   - vt6655 driver cleanups

   - vc04_services drivers cleanups

   - wfx cleanups on the way to almost getting this merged out of
     staging (it's close!)

   - tiny mips changes needed for the mt7621 drivers, they have been
     acked by the respective subsystem maintainers to go through this
     tree.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (622 commits)
  staging: r8188eu: hal: remove goto statement and local variable
  staging: rtl8723bs: hal remove the assignment to itself
  staging: rtl8723bs: fix unmet dependency on CRYPTO for CRYPTO_LIB_ARC4
  staging: vchiq_core: get rid of typedef
  staging: fieldbus: anybus: reframe comment to avoid warning
  staging: r8188eu: fix missing unlock in rtw_resume()
  staging: r8188eu: core: remove the goto from rtw_IOL_accquire_xmit_frame
  staging: r8188eu: core: remove goto statement
  staging: vt6655: Rename `dwAL7230InitTable` array
  staging: vt6655: Rename `dwAL2230PowerTable` array
  staging: vt6655: Rename `dwAL7230InitTableAMode` array
  staging: vt6655: Rename `dwAL7230ChannelTable2` array
  staging: vt6655: Rename `dwAL7230ChannelTable1` array
  staging: vt6655: Rename `dwAL7230ChannelTable0` array
  staging: vt6655: Rename `dwAL2230ChannelTable1` array
  staging: vt6655: Rename `dwAL2230ChannelTable0` array
  staging: r8712u: fix control-message timeout
  staging: rtl8192u: fix control-message timeouts
  staging: mt7621-dts: add missing SPDX license to files
  staging: vchiq_core: fix quoted strings split across lines
  ...

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver updates for
  5.16-rc1.

  Nothing major in here, just lots of little cleanups and additions for
  new hardware, all of which have been in linux-next for a while with no
  reported problems.

  Included in here are:

   - tiny Thunderbolt driver updates

   - USB typec driver updates

   - USB serial driver updates

   - USB gadget driver updates

   - dwc2 and dwc3 controller driver updates

   - tiny USB host driver updates

   - minor USB driver fixes and updates

   - USB dts updates for various platforms"

* tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits)
  usb: gadget: Mark USB_FSL_QE broken on 64-bit
  usb: gadget: f_mass_storage: Disable eps during disconnect
  usb: gadget: udc: core: Revise comments for USB ep enable/disable
  USB: serial: keyspan: fix memleak on probe errors
  USB: serial: cp210x: use usb_control_msg_recv() and usb_control_msg_send()
  USB: serial: ch314: use usb_control_msg_recv()
  USB: iowarrior: fix control-message timeouts
  Documentation: USB: fix example bulk-message timeout
  usb: dwc2: stm32mp15: set otg_rev
  usb: dwc2: add otg_rev and otg_caps information for gadget driver
  dt-bindings: usb: dwc2: adopt otg properties defined in usb-drd.yaml
  dt-bindings: usb: dwc2: Add reference to usb-drd.yaml
  usb: gadget: uvc: implement dwPresentationTime and scrSourceClock
  usb: gadget: uvc: use on returned header len in video_encode_isoc_sg
  usb:gadget: f_uac1: fixed sync playback
  Docs: usb: remove :c:func: for usb_register and usb_deregister
  Docs: usb: update struct usb_driver
  usb: gadget: configfs: change config attributes file operation
  usb: gadget: configfs: add cfg_to_gadget_info() helper
  usb: dwc3: Align DWC3_EP_* flag macros
  ...

In commit 2214c0e7 ("parisc: Move thread_info into task struct")
PA-RISC gained support for THREAD_INFO_IN_TASK while changes were
already underway to keep the CPU field in thread_info rather than move
it into task_struct when THREAD_INFO_IN_TASK is enabled. The result is a
broken build for all PA-RISC configs that enable SMP.

So let's partially revert that commit, and get rid of the ugly hack to
get at the offset of task_struct::cpu without having to include
linux/sched.h, and put the CPU field back where it was before.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: bcf9033e ("sched: move CPU field back into thread_info if THREAD_INFO_IN_TASK=y")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>