- 24 May, 2017 39 commits
-
-
Ping-Ke Shih authored
Count and log special packets of DHCP, EAPOL and ARP, and check whether the interface is in 4-way handshake. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Ping-Ke Shih authored
Force antenna setup for no scan result issue Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Ping-Ke Shih authored
When association starts, force antenna setup for no scan result issue. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Ping-Ke Shih authored
If driver announce wifi RF status is off, btc can switch antenna to BT. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Ping-Ke Shih authored
If BT is under WHCK, we enter a special mode. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Ping-Ke Shih authored
BT FW provide more BT status as clues, thus we also display them in coex log to help debug in field. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Ping-Ke Shih authored
This change is highly related to init_hwconfig that was decomposed into two parts for better program flow. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Ping-Ke Shih authored
In case of wifi_only, we can simply switch antenna to wifi. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Ping-Ke Shih authored
The larger the bt a2dp bit pool is, the more time bt needs to receive them. If we do not adjust the wifi duration, the voice quality will be low. Hence we reduce the time that wifi holds, to improve the a2dp service. If the bt is slave, it may receive a packet at any time, so we need to mark them as high priority packets in case of packet loss Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Ping-Ke Shih authored
Log the scan procedure, and update ap_num for future usage when scan done. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Ping-Ke Shih authored
Since wifi and BT share the same physical antenna, we should switch antenna to fit every situation. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Tom Gaudasinski authored
Make Epson WN7512BEP work by adding its device-id to rt2800usb. Device contains a Ralink RT3071L, registers as vendor Accton/Arcadyan. Signed-off-by:
Tom Gaudasinski <tomg@records.headdesk.com.au> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdfSigned-off-by:
Markus Elfring <elfring@users.sourceforge.net> Acked-by:
Michael Büsch <m@bues.ch> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Arnd Bergmann authored
This is a semi-automated conversion to change rt2x00_desc_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2x00_desc_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:\(\<_rt2x00_desc_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ drivers/net/wireless/ralink/rt2x00/rt* Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Arnd Bergmann authored
This is a semi-automated conversion to change rt2800_eeprom_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2800_eeprom_read\(_from_array\|\)\>(.*, .*\), &\(.*\));:\3 = \1);:' drivers/net/wireless/ralink/rt2x00/rt2800lib.c Some manual tweaking was required here to work around the line wraps. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Arnd Bergmann authored
This is a semi-automated conversion to change rt2x00_eeprom_read() to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2x00_eeprom_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:= _\(rt2x00_eeprom_read\):= \1:' drivers/net/wireless/ralink/rt2x00/* Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Arnd Bergmann authored
This is a semi-automated conversion to change *_bbp_read() to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt.*_bbp_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:\(\<rt.*_bbp_dcoc_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:= _\(rt.*_bbp_read\):\1:' drivers/net/wireless/ralink/rt2x00/* Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Arnd Bergmann authored
This is a semi-automated conversion to change rt2800_register_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(rt2800_register_read(.*, .*\), &\(.*\));:\2 = \1);:' \ 's:\(rt2800_register_read_lock(.*, .*\), &\(.*\));:\2 = \1);:' \ drivers/net/wireless/ralink/rt2x00/rt2800lib.c The function itself was modified manually along with the one remaining multi-line caller that was not covered automatically and the indirect reference. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Arnd Bergmann authored
This is a semi-automated conversion to change rt2x00usb_register_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2x00usb_register_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:\(\<rt2500usb_register_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:\(\<rt2500usb_register_read_lock\>(.*, .*\), &\(.*\));:\2 = \1);:' \ drivers/net/wireless/ralink/rt2x00/* Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Arnd Bergmann authored
This is a semi-automated conversion to change rt2x00mmio_register_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(rt2x00mmio_register_read(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:_rt2x00mmio_register_read:rt2x00mmio_register_read:' \ drivers/net/wireless/ralink/rt2x00/*.c The function itself was modified manually along with the one remaining caller that was not covered automatically. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Arnd Bergmann authored
This is a semi-automated conversion to change rt2x00_rf_read() to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2x00_rf_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ drivers/net/wireless/ralink/rt2x00/rt* Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Arnd Bergmann authored
With CONFIG_KASAN enabled and gcc-7, we get a warning about rather high stack usage (with a private patch set I have to turn on this warning, which I intend to get into the next kernel release): wireless/ralink/rt2x00/rt2800lib.c: In function 'rt2800_bw_filter_calibration': wireless/ralink/rt2x00/rt2800lib.c:7990:1: error: the frame size of 2144 bytes is larger than 1536 bytes [-Werror=frame-larger-than=] The problem is that KASAN inserts a redzone around each local variable that gets passed by reference, and the newly added function has a lot of them. This is a semi-automated conversion to change rt2800_rfcsr_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(rt2800_rfcsr_read(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:\(rt2800_rfcsr_read_bank(.*, .*\), &\(.*\));:\2 = \1);:' \ drivers/net/wireless/ralink/rt2x00/rt2800lib.c Fixes: 41977e86 ("rt2x00: add support for MT7620") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Arnd Bergmann authored
This prepares the driver for changing all the 'read' register accessors to return the value instead of passing it by reference. Since a lot of them are used in callbacks, this takes care of the callbacks first, adding a couple of helpers that will be removed again one at a time. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Kees Cook authored
In at least one place, the enter/exit debugging was not being correctly matched. Based on mailing list feedback, it was desired to drop all of these in favor of using ftrace instead. Suggested-by:
Joe Perches <joe@perches.com> Suggested-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Kees Cook authored
Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, redefine the stat strings to be ETH_GSTRING_LEN sizes, like other drivers. This lets us use a single memcpy that does not leak rodata contents. Additionally adjust indentation to keep checkpatch.pl happy. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <danielmicay@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Stanislaw Gruszka authored
iwlegacy firmware can crash when power save is configured. PS was allowed in "dbdac2b5 iwlegacy: properly enable power saving" with belive that user who enable PS is aware of that and can relate firmware crahes with PS. However some distributions seems to enable PS without user intervention, so warn about that. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Arnd Bergmann authored
In the stable linux-3.16 branch, I ran into a warning in the wlcore driver: drivers/net/wireless/ti/wlcore/spi.c: In function 'wl12xx_spi_raw_write': drivers/net/wireless/ti/wlcore/spi.c:315:1: error: the frame size of 12848 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] Newer kernels no longer show the warning, but the bug is still there, as the allocation is based on the CPU page size rather than the actual capabilities of the hardware. This replaces the PAGE_SIZE macro with the SZ_4K macro, i.e. 4096 bytes per buffer. Cc: stable@vger.kernel.org Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Karim Eshapa authored
Use time_after kernel macro for time comparison. Signed-off-by:
Karim Eshapa <karim.eshapa@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Prameela Rani Garnepudi authored
The older firmware loading method is not usable by any Redpine chipset. Hence removing that part of the code. Older firmware image with rsi_91x.fw name is deprecated Signed-off-by:
Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by:
Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Prameela Rani Garnepudi authored
The older firmware loading method has been deprecated and not in use for any chipets. New method is introduced which works based on soft boot loader. In this method, complete RAM image and FLASH image are present in the flash. Before loading the functional firmware, host issues boot loader commands to verify whether firmware to load is different from the current functional firmware. If not, firmware upgrade progresses and boot loader will switch to the new functional firmware. "rs9113_wlan_qspi.rps" is the firmware filename used in this patch. Signed-off-by:
Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by:
Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Prameela Rani Garnepudi authored
Host interface opearation master_reg_read, master_reg_write and load_data_master_write are added. These functions are needed for the new firmware loading method. As part of this, the function master_access_msword is moved from rsi_91x_sdio_ops.c to rsi_91x_sdio.c. Signed-off-by:
Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by:
Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Prameela Rani Garnepudi authored
Host interface operations are currently function pointers in rsi_hw structure. As more host interface operations are going to be introduced, separate structure is added for these for convenience. Signed-off-by:
Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by:
Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Prameela Rani Garnepudi authored
USB multibyte read will be used in the new firmware loading method for RS9113 chipset. Signed-off-by:
Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by:
Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Prameela Rani Garnepudi authored
In function usb_write_register_multiple, if any intermediate block transfer is failed, further operations should be terminated. 'else' is removed, as there is no significance for it after return. Signed-off-by:
Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by:
Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Prameela Rani Garnepudi authored
For USB vendor read and write operations new macros added to avoid redundant usage of long or'ed macros. Also for timeouts standard USB macros are used. Signed-off-by:
Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by:
Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Prameela Rani Garnepudi authored
USB read and write registers maximum size is limited 2^16. More than this size is not used in the driver. Signed-off-by:
Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by:
Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
amit karwar authored
RSI_USB_BUF_SIZE macro is used instead of hardcoding a buffer size to 4096. Signed-off-by:
Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Prameela Rani Garnepudi authored
SDIO read or write maximum size is limited to 2^16. This is done to make the host interface operations common for SDIO and USB. Signed-off-by:
Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by:
Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Prameela Rani Garnepudi authored
The file rsi_91x_hal.c is going to contain device specific code i.e new firmware loading method for RS9113 chipset. As the file rsi_91x_pkt.c contains code to prepare device specific descriptors for transmit packet, this file is renamed to rsi_91x_hal.c which is more relevant as per it's functionality. Signed-off-by:
Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by:
Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
- 22 May, 2017 1 commit
-
-
Dan Carpenter authored
We have the number of longs, but we should be calculating the number of bytes needed. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-