- 04 Mar, 2012 10 commits
-
-
Greg Ungerer authored
There is only trivial differences between the mmu time_mm.c and non-mmu time_no.c files. Merge them back into a single time.c. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
-
Greg Ungerer authored
The CONFIG_GENERIC_CMOS_UPDATE switch is always enabled for the non-MMU m68k case. But the underlying code to support it, update_persistent_clock(), doesn't end up doing anything on the currently supported non-MMU platforms. No platforms supply the necessary function support for writing back the RTC. So lets remove this option and support code. This also brings m68knommu in line with the m68k, which doesn't enabled this switch either. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
With a few small changes we can make the m68knommu timer init code the same as the m68k code. By using the mach_sched_init function pointer and reworking the current timer initializers to keep track of the common m68k timer_interrupt() handler we end up with almost identical code for m68knommu. This will allow us to more easily merge the mmu and non-mmu m68k time.c in future patches. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
The read_persistent_clock() code is different on m68knommu, for really no reason. With a few changes to support function names and some code re-organization the code can be made the same. This will make it easier to merge the arch/m68k/kernel/time.c for m68k and m68knommu in a future patch. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
The base of the real RAM resident hardware vectors, _ramvec, is declared in our asm/traps.h. No need to have local declarations spread around in other files that use this. So remove them. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
There is a lot of years of collected cruft in the m68knommu linker script. Clean it all up and use the well defined linker script support macros. Support is maintained for building both ROM/FLASH based and RAM based setups. No major changes to section layouts, though the rodata section is now lumped in with the read/write data section. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
The ColdFire MBAR register that holds the mapping of the peripheral region on some ColdFire CPUs is configurable. It can be configured at some address different to that of the bootloader that loaded the kernel. So hard set the MBAR register mapping at kernel startup time. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds authored
SCSI fixes from James Bottomley: "There's just a single fix in here: the osd max device number fix." * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] osd_uld: Bump MAX_OSD_DEVICES from 64 to 1,048,576
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6Linus Torvalds authored
PARISC fixes from James Bottomley: "This is a set of build fixes to get the cross compiled architecture testbeds building again" * tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] don't unconditionally override CROSS_COMPILE for 64 bit. [PARISC] include <linux/prefetch.h> in drivers/parisc/iommu-helpers.h [PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional
-
- 03 Mar, 2012 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull from Herbert Xu: "This push fixes a bug in mv_cesa that causes all hash operations that supply data on a final operation to fail." * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: mv_cesa - fix final callback not ignoring input data
-
Linus Torvalds authored
Commit 5707c87f "vfs: uninline full_name_hash()" broke the modular build, because it needs exporting now that it isn't inlined any more. Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 02 Mar, 2012 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
hhwmon fixes for 3.3-rc6 from Guenter Roeck: These patches are necessary for correct operation and management of F75387. * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (f75375s) Catch some attempts to write to r/o registers hwmon: (f75375s) Properly map the F75387 automatic modes to pwm_enable hwmon: (f75375s) Make pwm*_mode writable for the F75387 hwmon: (f75375s) Fix writes to the pwm* attribute for the F75387
-
git://github.com/schandinat/linux-2.6Linus Torvalds authored
fbdev fixes for 3.3 from Florian Tobias Schandinat It includes: - two fixes for OMAP HDMI - one fix to make new OMAP functions behave as they are supposed to - one Kconfig dependency fix - two fixes for viafb for modesetting on VX900 hardware * tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6: OMAPDSS: APPLY: make ovl_enable/disable synchronous OMAPDSS: panel-dvi: Add Kconfig dependency on I2C viafb: fix IGA1 modesetting on VX900 viafb: select HW scaling on VX900 for IGA2 OMAPDSS: HDMI: hot plug detect fix OMAPDSS: HACK: Ensure DSS clock domain gets out of idle when HDMI is enabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
sound fixes for 3.3-rc6 from Takashi Iwai This contains again regression fixes for various HD-audio and ASoC regarding SSI and dapm shutdown path. In addition, a minor azt3328 fix and the correction of the new jack-notification strings in HD-audio. * tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Kill hyphenated names ALSA: hda - Add a fake mute feature ALSA: hda - Always set HP pin in unsol handler for STAC/IDT codecs ALSA: azt3328 - Fix NULL ptr dereference on cards without OPL3 ALSA: hda/realtek - Fix resume of multiple input sources ASoC: i.MX SSI: Fix DSP_A format. ASoC: dapm: Check for bias level when powering down
-
Linus Torvalds authored
The code in link_path_walk() that finds out the length and the hash of the next path component is some of the hottest code in the kernel. And I have a version of it that does things at the full width of the CPU wordsize at a time, but that means that we *really* want to split it up into a separate helper function. So this re-organizes the code a bit and splits the hashing part into a helper function called "hash_name()". It returns the length of the pathname component, while at the same time computing and writing the hash to the appropriate location. The code generation is slightly changed by this patch, but generally for the better - and the added abstraction actually makes the code easier to read too. And the new interface is well suited for replacing just the "hash_name()" function with alternative implementations. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
It did some odd things for unclear reasons. As this is one of the functions that gets changed when doing word-at-a-time compares, this is yet another of the "don't change any semantics, but clean things up so that subsequent patches don't get obscured by the cleanups". Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
.. and also use it in lookup_one_len() rather than open-coding it. There aren't any performance-critical users, so inlining it is silly. But it wouldn't matter if it wasn't for the fact that the word-at-a-time dentry name patches want to conditionally replace the function, and uninlining it sets the stage for that. So again, this is a preparatory patch that doesn't change any semantics, and only prepares for a much cleaner and testable word-at-a-time dentry name accessor patch. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
These don't change any semantics, but they clean up the code a bit and mark some arguments appropriately 'const'. They came up as I was doing the word-at-a-time dcache name accessor code, and cleaning this up now allows me to send out a smaller relevant interesting patch for the experimental stuff. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nikolaus Schulz authored
It makes no sense to attempt to manually configure the fan in auto mode, or set the duty cycle directly in closed loop mode. The corresponding registers are then read-only. If the user tries it nonetheless, error out with EINVAL instead of silently doing nothing. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> [guenter.roeck@ericsson.com: Minor formatting cleanup] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
-
Nikolaus Schulz authored
The F75387 supports automatic fan control using either PWM duty cycle or RPM speed values. Make the driver detect the latter mode, and expose the different modes in sysfs as per pwm_enable, so that the user can switch between them. The interpretation of the pwm_enable attribute for the F75387 is adjusted to be a superset of those values used for similar Fintek chips which do not support automatic duty mode, with 2 mapping to automatic speed mode, and moving automatic duty mode to the new value 4. Toggling the duty mode via pwm_enable is currently denied for the F75387, as the chip then simply reinterprets the fan configuration register values according to the new mode, switching between RPM and PWM units, which makes this a dangerous operation. This patch introduces a new pwm mode into the driver. This is necessary because the new mode (automatic pwm mode, 4) may already be enabled by the BIOS, and the driver should not break existing functionality. This was seen on at least one board. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
-
Linus Torvalds authored
Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pulling latest branches from Ingo: * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: memblock: Fix size aligning of memblock_alloc_base_nid() * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf probe: Ensure offset provided is not greater than function length without DWARF info too perf tools: Ensure comm string is properly terminated perf probe: Ensure offset provided is not greater than function length perf evlist: Return first evsel for non-sample event on old kernel perf/hwbp: Fix a possible memory leak * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: CPU hotplug, cpusets, suspend: Don't touch cpusets during suspend/resume
-
H. Peter Anvin authored
There is only one error code to return for a bad user-space buffer pointer passed to a system call in the same address space as the system call is executed, and that is EFAULT. Furthermore, the low-level access routines, which catch most of the faults, return EFAULT already. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@hack.frob.com> Cc: <stable@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
H. Peter Anvin authored
The regset common infrastructure assumed that regsets would always have .get and .set methods, but not necessarily .active methods. Unfortunately people have since written regsets without .set methods. Rather than putting in stub functions everywhere, handle regsets with null .get or .set methods explicitly. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@hack.frob.com> Cc: <stable@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joerg Roedel authored
It turned out that a performance counter on AMD does not count at all when the GO or HO bit is set in the control register and SVM is disabled in EFER. This patch works around this issue by masking out the HO bit in the performance counter control register when SVM is not enabled. The GO bit is not touched because it is only set when the user wants to count in guest-mode only. So when SVM is disabled the counter should not run at all and the not-counting is the intended behaviour. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Avi Kivity <avi@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Robert Richter <robert.richter@amd.com> Cc: stable@vger.kernel.org # v3.2 Link: http://lkml.kernel.org/r/1330523852-19566-1-git-send-email-joerg.roedel@amd.comSigned-off-by: Ingo Molnar <mingo@elte.hu>
-
Takashi Iwai authored
Kill hyphens from "Line-Out" name strings, as suggested by Mark Brown. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Various smaller perf/urgent fixes. Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Watchdog updates from Wim Van Sebroeck: * git://www.linux-watchdog.org/linux-watchdog: watchdog: fix GETTIMEOUT ioctl in booke_wdt watchdog: update maintainers git entry watchdog: Fix typo in pnx4008_wdt.c watchdog: Fix typo in Kconfig watchdog: fix error in probe() of s3c2410_wdt (reset at booting) watchdog: hpwdt: clean up set_memory_x call for 32 bit
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull from Mark Brown: "A simple, driver specific fix. This device isn't widely used outside of Marvell reference boards most of which are probably used with their BSPs rather than with mainline so low risk." * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: fix the ldo configure according to 88pm860x spec
-
git://git.pengutronix.de/git/wsa/linux-2.6Linus Torvalds authored
i2c bugfix from Wolfram Sang: "This patch fixes a wrong assumption in the mxs-i2c-driver about a command queue being done. Without it, we have seen races when the bus was under load." * 'i2c-embedded/for-3.3' of git://git.pengutronix.de/git/wsa/linux-2.6: i2c: mxs: only flag completion when queue is completely done
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
DRM fixes from Dave Airlie: intel: fixes for output regression on 965GM, an oops and a machine hang radeon: uninitialised var (that gcc didn't warn about for some reason) + a couple of correctness fixes. exynos: fixes for various things, drop some chunks of unused code. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms/vm: fix possible bug in radeon_vm_bo_rmv() drm/radeon: fix uninitialized variable drm/radeon/kms: fix radeon_dp_get_modes for LVDS bridges (v2) drm/i915: Remove use of the autoreported ringbuffer HEAD position drm/i915: Prevent a machine hang by checking crtc->active before loading lut drm/i915: fix operator precedence when enabling RC6p drm/i915: fix a sprite watermark computation to avoid divide by zero if xpos<0 drm/i915: fix mode set on load pipe. (v2) drm/exynos: exynos_drm.h header file fixes drm/exynos: added panel physical size. drm/exynos: added postclose to release resource. drm/exynos: removed exynos_drm_fbdev_recreate function. drm/exynos: fixed page flip issue. drm/exynos: added possible_clones setup function. drm/exynos: removed pageflip_event_list init code when closed. drm/exynos: changed priority of mixer layers. drm/exynos: Fix typo in exynos_mixer.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: [S390] memory hotplug: prevent memory zone interleave [S390] crash_dump: remove duplicate include [S390] KEYS: Enable the compat keyctl wrapper on s390x
-
- 01 Mar, 2012 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/soundTakashi Iwai authored
A small fix for the SSI driver and a fix for system shutdown with modern devices. Most of the modern devices will never get shut down normally with a visible kernel log as the systems they're in tend not to shut down often and when they do it's usually in form factors that don't have a user visible console.
-
Tejun Heo authored
memblock allocator aligns @size to @align to reduce the amount of fragmentation. Commit: 7bd0b0f0 ("memblock: Reimplement memblock allocation using reverse free area iterator") Broke it by incorrectly relocating @size aligning to memblock_find_in_range_node(). As the aligned size is not propagated back to memblock_alloc_base_nid(), the actually reserved size isn't aligned. While this increases memory use for memblock reserved array, this shouldn't cause any critical failure; however, it seems that the size aligning was hiding a use-beyond-allocation bug in sparc64 and losing the aligning causes boot failure. The underlying problem is currently being debugged but this is a proper fix in itself, it's already pretty late in -rc cycle for boot failures and reverting the change for debugging isn't difficult. Restore the size aligning moving it to memblock_alloc_base_nid(). Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20120228205621.GC3252@dhcp-172-17-108-109.mtv.corp.google.comSigned-off-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <alpine.SOC.1.00.1202130942030.1488@math.ut.ee>
-
- 29 Feb, 2012 5 commits
-
-
git://github.com/rustyrussell/linuxLinus Torvalds authored
Merge virtio pull request from Rusty Russell. * tag 'for-linus' of git://github.com/rustyrussell/linux: virtio: balloon: leak / fill balloon across S4
-
Amit Shah authored
commit e562966d added support for S4 to the balloon driver. The freeze function did nothing to free the pages, since reclaiming the pages from the host to immediately give them back (if S4 was successful) seemed wasteful. Also, if S4 wasn't successful, the guest would have to re-fill the balloon. On restore, the pages were supposed to be marked freed and the free page counters were incremented to reflect the balloon was totally deflated. However, this wasn't done right. The pages that were earlier taken away from the guest during a balloon inflation operation were just shown as used pages after a successful restore from S4. Just a fancy way of leaking lots of memory. Instead of trying that, just leak the balloon on freeze and fill it on restore/thaw paths. This works properly now. The optimisation to not leak can be added later on after a bit of refactoring of the code. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
-
Tomi Valkeinen authored
ovl->enable/disable are meant to be synchronous so that they can handle the configuration of fifo sizes. The current kernel doesn't configure fifo sizes yet, and so the code doesn't need to block to function (from omapdss driver's perspective). However, for the users of omapdss a non-blocking ovl->disable is confusing, because they don't know when the memory area is not used any more. Furthermore, when the fifo size configuration is added in the next merge window, the change from non-blocking to blocking could cause side effects to the users of omapdss. So by making the functions block already will keep them behaving in the same manner. And, while not the main purpose of this patch, this will also remove the compile warning: drivers/video/omap2/dss/apply.c:350: warning: 'wait_pending_extra_info_updates' defined but not used Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Tomi Valkeinen authored
panel-dvi uses i2c, but the Kconfig didn't have dependency on I2C. Add it. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Prashanth Nageshappa authored
The 'perf probe' command allows kprobe to be inserted at any offset from a function start, which results in adding kprobes to unintended location. (example: perf probe do_fork+10000 is allowed even though size of do_fork is ~904). My previous patch https://lkml.org/lkml/2012/2/24/42 addressed the case where DWARF info was available for the kernel. This patch fixes the case where perf probe is used on a kernel without debuginfo available. Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/4F4C544D.1010909@linux.vnet.ibm.comSigned-off-by: Prashanth Nageshappa <prashanth@linux.vnet.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-