- 31 Jan, 2017 26 commits
-
-
Kevin Hilman authored
Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Kevin Hilman authored
Video capture subdevs may be over I2C and may sleep during xfer, so we cannot do IRQ-disabled locking when calling the subdev. The IRQ-disabled locking is meant to protect the DMA queue list throughout the rest of the driver, so update the locking in [start|stop]_streaming to protect just this list, and update the irqlock comment to reflect what it actually protects. Suggested-by:
-
Kevin Hilman authored
Remove hard-coded I2C adapter in favor of getting the ID from platform_data. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Kevin Hilman authored
Fix problems with automatic module loading by adding MODULE_ALIAS. Also fix various load-time errors cause by incorrect or not present platform_data. Acked-by:
-
Randy Dunlap authored
Fix dm1105 build error when CONFIG_I2C_ALGOBIT=m and CONFIG_DVB_DM1105=y. drivers/built-in.o: In function `dm1105_probe': dm1105.c:(.text+0x2836e7): undefined reference to `i2c_bit_add_bus' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: stable@vger.kernel.org # applies to 4.0 (maybe even 3.x) Signed-off-by:
-
Andrzej Hajda authored
Bool values should be negated using logical operators. Using bitwise operators results in unexpected and possibly incorrect results. Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Pavel Machek authored
Mark me and Sakari as maintainers for Nokia N900 camera pieces. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Markus Elfring authored
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Acked-by:
-
Shyam Saini authored
When some other buffer is immediately copied into allocated region. Replace calls to kmalloc followed by a memcpy with a direct call to kmemdup. Signed-off-by:
Shyam Saini <mayhs11saini@gmail.com> Signed-off-by:
-
Santosh Kumar Singh authored
Fix to avoid possible exit file handle in error paths. Signed-off-by:
Santosh Kumar Singh <kumar.san1093@gmail.com> Signed-off-by:
-
Santosh Kumar Singh authored
Fix to avoid possible exit file handle in error paths. Signed-off-by:
-
Santosh Kumar Singh authored
Fix to avoid possible memory leak and exit file handle in error paths. Signed-off-by:
-
Santosh Kumar Singh authored
Fix to avoid possible memory leak and exit file handle in error paths. Signed-off-by:
-
Santosh Kumar Singh authored
Fix to avoid possible memory leak and exit file handle in error paths. Signed-off-by:
-
Kees Cook authored
Prepare to mark sensitive kernel structures for randomization by making sure they're using designated initializers. These were identified during allyesconfig builds of x86, arm, and arm64, with most initializer fixes extracted from grsecurity. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Kees Cook authored
Prepare to mark sensitive kernel structures for randomization by making sure they're using designated initializers. These were identified during allyesconfig builds of x86, arm, and arm64, with most initializer fixes extracted from grsecurity. Signed-off-by:
-
Sudip Mukherjee authored
If dvb_attach() fails then we were just printing an error message and exiting but the memory allocated to state was not released. Signed-off-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by:
-
Sean Young authored
tx-only RC devices do not have a receive buffer. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Sean Young authored
LIRC_SET_REC_TIMEOUT can fail if the value returned by LIRC_GET_MIN_TIMEOUT is set due to rounding errors. Signed-off-by:
-
Sean Young authored
The current message has some wanted spaces on it: rc_core: Loaded IR protocol module ir-jvc-decoder, but protocol jvc still not available Merge it into a single line. Signed-off-by:
-
Sean Young authored
An RC device which is transmit-only shouldn't have the LIRC_CAN_REC_MODE2 feature. Signed-off-by:
-
Martin Blumenstingl authored
The GeekBox ships with a 12 button remote control which seems to use the NEC protocol. The button keycodes were captured with the "ir-keytable" tool (ir-keytable -p $PROTOCOL -t; human_button_pusher). Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Sean Wang authored
This patch adds documentation for devicetree bindings for consumer Mediatek IR controller. Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Acked-by:
-
Sean Wang authored
Most IR drivers uses the same label to identify the scancode/key table they used by multiple bindings and lack explanation well. So move the shared property into a common place and give better explanation. Signed-off-by:
-
Sean Wang authored
This patch adds driver for IR controller on MT7623 SoC. and should also work on similar Mediatek SoC. Currently testing successfully on NEC and SONY remote controller only but it should work on others (lirc, rc-5 and rc-6). Signed-off-by:
-
Sean Young authored
As reported by kernel build test: In file included from arch/arm/mach-omap2/pdata-quirks.c:15:0: >> arch/arm/mach-omap2/pdata-quirks.c:536:49: error: 'rx51_lirc_data' undeclared here (not in a function) OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_lirc_data), ^ include/linux/of_platform.h:52:21: note: in definition of macro 'OF_DEV_AUXDATA' .platform_data = _pdata } ^~~~~~ Since "a92def1b [media] ir-rx51: port to rc-core" the build fails on some arm configurations. Reported-by:
-
- 30 Jan, 2017 14 commits
-
-
Scott Matheina authored
Fixed checkpatch check blank line before closing brace '}' Signed-off-by:
Scott Matheina <scott@matheina.com> Signed-off-by:
-
Scott Matheina authored
Fixed Checkpatch check "Alignment should match open parenthesis" Signed-off-by:
-
Baruch Siach authored
Simplifies return value logic of adv7170_set_fmt(). Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
Baruch Siach authored
The loop over the ov2659_formats[] array just a few lines above verifies that mf->code matches the selected array entry. Signed-off-by:
-
Colin Ian King authored
trivial fix to spelling mistake in err message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
trivial fix to spelling mistake in deb_chk message Signed-off-by:
-
Colin Ian King authored
trivial fix to spelling mistake in cobalt_info message. Anders Celsius was the Swedish astronomer. Signed-off-by:
-
Colin Ian King authored
trivial fix to spelling mistake of function name in err message, should be cx24123_pll_calculate instead of cx24123_pll_calcutate. Signed-off-by:
-
Nicolas Iooss authored
In vpfe_s_fmt(), when the sensor format and the requested format were the same, bpp was assigned to vpfe->bpp without being initialized first. Grab the bpp value that is currently used by using __vpfe_get_format() instead of its wrapper, vpfe_try_fmt(). This use of uninitialized variable has been found by compiling the kernel with clang. Fixes: 417d2e50 ("[media] media: platform: add VPFE capture driver support for AM437X") Cc: stable@vger.kernel.org Signed-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by:
-
Hans Verkuil authored
Document the EIO error since this can happen anywhere anytime and applications should be aware of this. Also fix typo: exaustive -> exhaustive Signed-off-by:
-
Soren Brinkmann authored
Add 3840x2160 as valid resolution for the webcam capture input and adjust the webcam intervals accordingly. Signed-off-by:
Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by:
-
Corentin Labbe authored
Commit d78c16cc ("ARM: SAMSUNG: Remove remaining legacy code") removed the Kconfig symbol PLAT_S5P. This patch remove the last occurrence of this symbol. Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
-
Corentin Labbe authored
s5p-cec: does not use any miscdevice so this patch remove this unnecessary inclusion. Signed-off-by:
-
Lars-Peter Clausen authored
The adv7604 driver platform data contains fields for configuring the drive strength of the output pins. When probing the driver through DT these fields are not explicitly initialized, which means they are left at 0. This is a reserved setting for the drive strength configuration though and can cause signal integrity issues. Whether these signal integrity issues are visible depends on the PCB specifics (e.g. the higher the load capacitance for the output the more visible the issue). But it has been observed on existing solutions at high pixel clock rates. Initialize the drive strength settings to the power-on-reset value of the device when probing through devicetree to avoid this issue. Fixes: 0e158be0162b ("adv7604: Add DT support") Signed-off-by:Lars-Peter Clausen <lars@metafoo.de> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
